3.19-rc1 errors when opening LID

["Pali Rohár" <pali.rohar@gmail.com>]

[-- Attachment #1.1: Type: Text/Plain, Size: 3071 bytes --]

Hello!

With new 3.19-rc1 kernel every time when I open LID on my laptop, kernel prints these error lines to dmesg:

[25566.368133] [drm:hsw_unclaimed_reg_detect.isra.6 [i915]] *ERROR* Unclaimed register detected. Please use the i915.mmio_debug=1 to debug this problem.
[25566.368134] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
[25566.368192] [drm:hsw_unclaimed_reg_detect.isra.6 [i915]] *ERROR* Unclaimed register detected. Please use the i915.mmio_debug=1 to debug this problem.
[25566.368232] [drm:hsw_unclaimed_reg_detect.isra.6 [i915]] *ERROR* Unclaimed register detected. Please use the i915.mmio_debug=1 to debug this problem.<4>[25568.446011] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] 
has bogus alignment
[25568.447018] pci_bus 0000:02: Allocating resources
[25568.447055] pci_bus 0000:03: Allocating resources
[25568.447135] pci_bus 0000:04: Allocating resources
[25568.447168] pci_bus 0000:05: Allocating resources
[25568.447195] pci_bus 0000:06: Allocating resources
[25568.447228] pci_bus 0000:0e: Allocating resources
[25568.447323] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[25568.447557] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[25568.447735] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[25568.447847] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[25568.448399] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[25568.448438] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[25568.448566] acpi MSFT1111:00: Cannot transition to power state D3cold for parent in (unknown)
[25568.448572] acpi INT33C2:00: Cannot transition to non-D0 state from D3
[25568.448577] acpi MSFT0002:00: Cannot transition to power state D3cold for parent in (unknown)
[25568.448581] acpi ELAN1010:00: Cannot transition to power state D3cold for parent in (unknown)
[25568.448587] acpi INT33C3:00: Cannot transition to non-D0 state from D3
[25568.448590] acpi INT33C0:00: Cannot transition to non-D0 state from D3
[25568.448594] acpi INT33C1:00: Cannot transition to non-D0 state from D3
[25568.448598] acpi INT33C4:00: Cannot transition to non-D0 state from D3
[25568.448602] acpi INT33C5:00: Cannot transition to non-D0 state from D3
[25568.448623] acpi device:41: Cannot transition to power state D3cold for parent in (unknown)
[25568.448627] acpi INT33C6:00: Cannot transition to non-D0 state from D3
[25568.448890] pci_bus 0000:01: Allocating resources
[25568.448905] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[25568.449064] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[25568.449472] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment

With older kernel (3.13) I do not see these errors, so it is regression. Can you look at it? If it is needed, I can provide other logs, ACPI/DSTD dumps, etc.

-- 
Pali Rohár
pali.rohar@gmail.com

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx