[PATCH 1/8] soc: Add MediaTek infracfg controller support

[mark.rutland@arm.com (Mark Rutland)]

On Tue, Jan 20, 2015 at 09:47:04AM +0000, Sascha Hauer wrote:
> This adds support for the MediaTek infracfg controller found
> on the MT8135/MT8173 SoCs. The infracfg controller contains
> miscellaneous registers for controlling peripheral resets and
> clocks.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../devicetree/bindings/soc/mediatek/infracfg.txt  |  19 +++
>  drivers/soc/Kconfig                                |   1 +
>  drivers/soc/Makefile                               |   1 +
>  drivers/soc/mediatek/Kconfig                       |  12 ++
>  drivers/soc/mediatek/Makefile                      |   1 +
>  drivers/soc/mediatek/mtk-infracfg.c                | 127 ++++++++++++++++++++
>  drivers/soc/mediatek/mtk-pericfg.c                 | 128 +++++++++++++++++++++
>  7 files changed, 289 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/mediatek/infracfg.txt
>  create mode 100644 drivers/soc/mediatek/Kconfig
>  create mode 100644 drivers/soc/mediatek/Makefile
>  create mode 100644 drivers/soc/mediatek/mtk-infracfg.c
>  create mode 100644 drivers/soc/mediatek/mtk-pericfg.c
> 
> diff --git a/Documentation/devicetree/bindings/soc/mediatek/infracfg.txt b/Documentation/devicetree/bindings/soc/mediatek/infracfg.txt
> new file mode 100644
> index 0000000..042083a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/mediatek/infracfg.txt
> @@ -0,0 +1,19 @@
> +MediaTek infracfg Controller
> +
> +The infracfg controller contains miscellaneous registers for controlling
> +clocks, resets and bus settings.
> +
> +Required properties:
> +- compatible: must be one of:
> +       mediatek,mt8135-infracfg
> +       mediatek,mt8173-infracfg
> +- reg: Address range for the infracfg controller
> +
> +Example:
> +
> +       infracfg: infracfg at 10003000 {
> +               #reset-cells = <1>;
> +               #clock-cells = <1>;

These weren't listed as required or optional above.

Please document these, along with the values a given clock-specifier or
reset-specifier may take.

> +               compatible = "mediatek,mt8135-infracfg";
> +               reg = <0 0x10003000 0 0x1000>;
> +       };

Thanks,
Mark.