From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 8/8] regulator: MT6397: Add support for MT6397 regulator
Date: Wed, 21 Jan 2015 09:26:22 +0100 [thread overview]
Message-ID: <20150121082622.GG18908@pengutronix.de> (raw)
In-Reply-To: <1421747231-554-9-git-send-email-s.hauer@pengutronix.de>
On Tue, Jan 20, 2015 at 10:47:11AM +0100, Sascha Hauer wrote:
> From: Flora Fu <flora.fu@mediatek.com>
>
> This adds support for the regulators on the MediaTek MT6397
> Multifunction device.
>
> Signed-off-by: Flora Fu, MediaTek
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Liam Girdwood <lgirdwood@gmail.com>
> Cc: Mark Brown <broonie@kernel.org>
> ---
> Documentation/devicetree/bindings/mfd/mt6397.txt | 41 ++-
> .../bindings/regulator/mt6397-regulator.txt | 217 ++++++++++++++
> drivers/regulator/Kconfig | 9 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/mt6397-regulator.c | 332 +++++++++++++++++++++
> include/linux/regulator/mt6397-regulator.h | 49 +++
> 6 files changed, 626 insertions(+), 23 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
> create mode 100644 drivers/regulator/mt6397-regulator.c
> create mode 100644 include/linux/regulator/mt6397-regulator.h
>
> diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
I'll move this documentation update to the patch adding the MFD driver
where it belongs to. I'll drop the reset of this patch since it's already
in Linux-next.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
WARNING: multiple messages have this Message-ID (diff)
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Eddie Huang <eddie.huang@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Lee Jones <lee.jones@linaro.org>, Mark Brown <broonie@kernel.org>,
Flora Fu <flora.fu@mediatek.com>,
Liam Girdwood <lgirdwood@gmail.com>
Subject: Re: [PATCH 8/8] regulator: MT6397: Add support for MT6397 regulator
Date: Wed, 21 Jan 2015 09:26:22 +0100 [thread overview]
Message-ID: <20150121082622.GG18908@pengutronix.de> (raw)
In-Reply-To: <1421747231-554-9-git-send-email-s.hauer@pengutronix.de>
On Tue, Jan 20, 2015 at 10:47:11AM +0100, Sascha Hauer wrote:
> From: Flora Fu <flora.fu@mediatek.com>
>
> This adds support for the regulators on the MediaTek MT6397
> Multifunction device.
>
> Signed-off-by: Flora Fu, MediaTek
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Liam Girdwood <lgirdwood@gmail.com>
> Cc: Mark Brown <broonie@kernel.org>
> ---
> Documentation/devicetree/bindings/mfd/mt6397.txt | 41 ++-
> .../bindings/regulator/mt6397-regulator.txt | 217 ++++++++++++++
> drivers/regulator/Kconfig | 9 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/mt6397-regulator.c | 332 +++++++++++++++++++++
> include/linux/regulator/mt6397-regulator.h | 49 +++
> 6 files changed, 626 insertions(+), 23 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
> create mode 100644 drivers/regulator/mt6397-regulator.c
> create mode 100644 include/linux/regulator/mt6397-regulator.h
>
> diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
I'll move this documentation update to the patch adding the MFD driver
where it belongs to. I'll drop the reset of this patch since it's already
in Linux-next.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2015-01-21 8:26 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-20 9:47 MediaTek PMIC support Sascha Hauer
2015-01-20 9:47 ` Sascha Hauer
2015-01-20 9:47 ` [PATCH 1/8] soc: Add MediaTek infracfg controller support Sascha Hauer
2015-01-20 9:47 ` Sascha Hauer
2015-01-20 16:14 ` Mark Rutland
2015-01-20 16:14 ` Mark Rutland
2015-01-21 8:14 ` Sascha Hauer
2015-01-21 8:14 ` Sascha Hauer
2015-01-20 9:47 ` [PATCH 2/8] soc: Add MediaTek pericfg " Sascha Hauer
2015-01-20 9:47 ` Sascha Hauer
2015-01-20 13:18 ` Yingjoe Chen
2015-01-20 13:18 ` Yingjoe Chen
2015-01-20 13:27 ` Sascha Hauer
2015-01-20 13:27 ` Sascha Hauer
2015-01-20 16:15 ` Mark Rutland
2015-01-20 16:15 ` Mark Rutland
2015-01-21 8:17 ` Sascha Hauer
2015-01-21 8:17 ` Sascha Hauer
2015-01-20 9:47 ` [PATCH 3/8] dt: bindings: Add MediaTek MT8135/MT8173 reset controller defines Sascha Hauer
2015-01-20 9:47 ` Sascha Hauer
2015-01-20 9:47 ` [PATCH 4/8] soc: mediatek: Add PMIC wrapper for MT8135 and MT6397 SoC Sascha Hauer
2015-01-20 9:47 ` Sascha Hauer
2015-01-20 9:47 ` [PATCH 5/8] ARM: dts: mt8135: Add pericfg, infracfg and pmic wrapper nodes Sascha Hauer
2015-01-20 9:47 ` Sascha Hauer
2015-01-20 9:47 ` [PATCH 6/8] ARM: dts: mt8135-evbp1: Add PMIC support Sascha Hauer
2015-01-20 9:47 ` Sascha Hauer
2015-01-20 9:47 ` [PATCH 7/8] mfd: Add support for the MediaTek MT6397 PMIC Sascha Hauer
2015-01-20 9:47 ` Sascha Hauer
2015-01-20 9:47 ` [PATCH 8/8] regulator: MT6397: Add support for MT6397 regulator Sascha Hauer
2015-01-20 9:47 ` Sascha Hauer
2015-01-20 10:07 ` Paul Bolle
2015-01-20 10:07 ` Paul Bolle
2015-01-20 10:54 ` Sascha Hauer
2015-01-20 10:54 ` Sascha Hauer
2015-01-21 8:26 ` Sascha Hauer [this message]
2015-01-21 8:26 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150121082622.GG18908@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.