From: Liu Ying <Ying.Liu@freescale.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
linux-fbdev@vger.kernel.org,
Steve Longerbeam <steve_longerbeam@mentor.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Denis Carikli <denis@eukrea.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Steve Longerbeam <slongerbeam@gmail.com>,
Russell King <rmk+kernel@arm.linux.org.uk>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Subject: Re: [PATCH v2 0/7] imx-drm: ipuv3-crtc: Implement mode_fixup
Date: Fri, 23 Jan 2015 02:56:45 +0000 [thread overview]
Message-ID: <20150123025643.GA11412@victor> (raw)
In-Reply-To: <1420655248.3191.73.camel@pengutronix.de>
Hi,
It looks that the below commit makes my Hannstar XGA LVDS panel stop working
on the i.MX6DL SabreSD board. Any idea?
commit eb10d6355532def3a74aaabd115e2373cca70b9d
Author: Steve Longerbeam <slongerbeam@gmail.com>
Date: Thu Dec 18 18:00:24 2014 -0800
imx-drm: encoder prepare/mode_set must use adjusted mode
The encoder ->prepare() and ->mode_set() methods need to use the
hw adjusted mode, not the original mode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Regards,
Liu Ying
On Wed, Jan 07, 2015 at 07:27:28PM +0100, Philipp Zabel wrote:
> Am Donnerstag, den 18.12.2014, 18:00 -0800 schrieb Steve Longerbeam:
> > This patchset implements ->mode_fixup() in the imx ipuv3-crtc driver,
> > using a new support function ipu_di_adjust_videomode(). This new
> > function needs to be subsystem independent, so it accepts a video
> > mode as a 'struct videomode'. Hence ipu-crtc ->mode_fixup() needs
> > another support function to convert a drm_display_mode to a videomode
> > before passing the mode to ipu_di_adjust_videomode() for fixup.
> >
> > Also some related code cleanup: 'struct ipu_di_signal_cfg' should
> > use 'struct videomode' for mode timings.
>
> Alright, I have applied the series with
> s/videomode_from_drm_display_mode/drm_display_mode_to_videomode/
>
> thanks
> Philipp
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Liu Ying <Ying.Liu@freescale.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
linux-fbdev@vger.kernel.org,
Steve Longerbeam <steve_longerbeam@mentor.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Denis Carikli <denis@eukrea.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Steve Longerbeam <slongerbeam@gmail.com>,
Russell King <rmk+kernel@arm.linux.org.uk>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Subject: Re: [PATCH v2 0/7] imx-drm: ipuv3-crtc: Implement mode_fixup
Date: Fri, 23 Jan 2015 10:56:45 +0800 [thread overview]
Message-ID: <20150123025643.GA11412@victor> (raw)
In-Reply-To: <1420655248.3191.73.camel@pengutronix.de>
Hi,
It looks that the below commit makes my Hannstar XGA LVDS panel stop working
on the i.MX6DL SabreSD board. Any idea?
commit eb10d6355532def3a74aaabd115e2373cca70b9d
Author: Steve Longerbeam <slongerbeam@gmail.com>
Date: Thu Dec 18 18:00:24 2014 -0800
imx-drm: encoder prepare/mode_set must use adjusted mode
The encoder ->prepare() and ->mode_set() methods need to use the
hw adjusted mode, not the original mode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Regards,
Liu Ying
On Wed, Jan 07, 2015 at 07:27:28PM +0100, Philipp Zabel wrote:
> Am Donnerstag, den 18.12.2014, 18:00 -0800 schrieb Steve Longerbeam:
> > This patchset implements ->mode_fixup() in the imx ipuv3-crtc driver,
> > using a new support function ipu_di_adjust_videomode(). This new
> > function needs to be subsystem independent, so it accepts a video
> > mode as a 'struct videomode'. Hence ipu-crtc ->mode_fixup() needs
> > another support function to convert a drm_display_mode to a videomode
> > before passing the mode to ipu_di_adjust_videomode() for fixup.
> >
> > Also some related code cleanup: 'struct ipu_di_signal_cfg' should
> > use 'struct videomode' for mode timings.
>
> Alright, I have applied the series with
> s/videomode_from_drm_display_mode/drm_display_mode_to_videomode/
>
> thanks
> Philipp
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Liu Ying <Ying.Liu@freescale.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Steve Longerbeam <slongerbeam@gmail.com>,
<dri-devel@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>,
<linux-fbdev@vger.kernel.org>, David Airlie <airlied@linux.ie>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Russell King <rmk+kernel@arm.linux.org.uk>,
"Fabio Estevam" <fabio.estevam@freescale.com>,
Shawn Guo <shawn.guo@linaro.org>,
Denis Carikli <denis@eukrea.com>,
Jiada Wang <jiada_wang@mentor.com>,
"Steve Longerbeam" <steve_longerbeam@mentor.com>
Subject: Re: [PATCH v2 0/7] imx-drm: ipuv3-crtc: Implement mode_fixup
Date: Fri, 23 Jan 2015 10:56:45 +0800 [thread overview]
Message-ID: <20150123025643.GA11412@victor> (raw)
In-Reply-To: <1420655248.3191.73.camel@pengutronix.de>
Hi,
It looks that the below commit makes my Hannstar XGA LVDS panel stop working
on the i.MX6DL SabreSD board. Any idea?
commit eb10d6355532def3a74aaabd115e2373cca70b9d
Author: Steve Longerbeam <slongerbeam@gmail.com>
Date: Thu Dec 18 18:00:24 2014 -0800
imx-drm: encoder prepare/mode_set must use adjusted mode
The encoder ->prepare() and ->mode_set() methods need to use the
hw adjusted mode, not the original mode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Regards,
Liu Ying
On Wed, Jan 07, 2015 at 07:27:28PM +0100, Philipp Zabel wrote:
> Am Donnerstag, den 18.12.2014, 18:00 -0800 schrieb Steve Longerbeam:
> > This patchset implements ->mode_fixup() in the imx ipuv3-crtc driver,
> > using a new support function ipu_di_adjust_videomode(). This new
> > function needs to be subsystem independent, so it accepts a video
> > mode as a 'struct videomode'. Hence ipu-crtc ->mode_fixup() needs
> > another support function to convert a drm_display_mode to a videomode
> > before passing the mode to ipu_di_adjust_videomode() for fixup.
> >
> > Also some related code cleanup: 'struct ipu_di_signal_cfg' should
> > use 'struct videomode' for mode timings.
>
> Alright, I have applied the series with
> s/videomode_from_drm_display_mode/drm_display_mode_to_videomode/
>
> thanks
> Philipp
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-01-23 2:56 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-19 2:00 [PATCH v2 0/7] imx-drm: ipuv3-crtc: Implement mode_fixup Steve Longerbeam
2014-12-19 2:00 ` Steve Longerbeam
2014-12-19 2:00 ` [PATCH v2 1/7] gpu: ipu-di: Add ipu_di_adjust_videomode() Steve Longerbeam
2014-12-19 2:00 ` Steve Longerbeam
2014-12-19 11:07 ` Philipp Zabel
2014-12-19 11:07 ` Philipp Zabel
2014-12-19 11:07 ` Philipp Zabel
2014-12-19 2:00 ` [PATCH v2 2/7] gpu: ipu-di: remove some non-functional code Steve Longerbeam
2014-12-19 2:00 ` Steve Longerbeam
2014-12-19 2:00 ` [PATCH v2 3/7] drm_modes: add videomode_from_drm_display_mode Steve Longerbeam
2014-12-19 2:00 ` Steve Longerbeam
2014-12-19 11:03 ` Philipp Zabel
2014-12-19 11:03 ` Philipp Zabel
2014-12-19 11:03 ` Philipp Zabel
2014-12-19 19:03 ` Emil Velikov
2014-12-19 19:03 ` Emil Velikov
2014-12-19 19:03 ` Emil Velikov
2014-12-19 19:10 ` Steve Longerbeam
2014-12-19 19:10 ` Steve Longerbeam
2014-12-19 2:00 ` [PATCH v2 4/7] imx-drm: ipuv3-crtc: Implement mode_fixup Steve Longerbeam
2014-12-19 2:00 ` Steve Longerbeam
2014-12-20 15:52 ` Russell King - ARM Linux
2014-12-20 15:52 ` Russell King - ARM Linux
2014-12-20 15:52 ` Russell King - ARM Linux
2014-12-22 15:53 ` Philipp Zabel
2014-12-22 15:53 ` Philipp Zabel
2014-12-19 2:00 ` [PATCH v2 5/7] imx-drm: encoder prepare/mode_set must use adjusted mode Steve Longerbeam
2014-12-19 2:00 ` Steve Longerbeam
2014-12-19 2:00 ` [PATCH v2 6/7] gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg Steve Longerbeam
2014-12-19 2:00 ` Steve Longerbeam
2014-12-19 2:00 ` [PATCH v2 7/7] gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc Steve Longerbeam
2014-12-19 2:00 ` Steve Longerbeam
2015-01-07 18:27 ` [PATCH v2 0/7] imx-drm: ipuv3-crtc: Implement mode_fixup Philipp Zabel
2015-01-07 18:27 ` Philipp Zabel
2015-01-23 2:56 ` Liu Ying [this message]
2015-01-23 2:56 ` Liu Ying
2015-01-23 2:56 ` Liu Ying
2015-01-23 10:50 ` Philipp Zabel
2015-01-23 10:50 ` Philipp Zabel
2015-01-23 10:50 ` Philipp Zabel
2015-01-23 14:44 ` Fabio Estevam
2015-01-23 14:44 ` Fabio Estevam
2015-01-23 14:44 ` Fabio Estevam
2015-01-23 15:06 ` Fabio Estevam
2015-01-23 15:06 ` Fabio Estevam
2015-01-23 15:06 ` Fabio Estevam
2015-01-23 16:18 ` Philipp Zabel
2015-01-23 16:18 ` Philipp Zabel
2015-01-23 16:27 ` Fabio Estevam
2015-01-23 16:27 ` Fabio Estevam
2015-01-23 16:27 ` Fabio Estevam
2015-01-23 16:39 ` Philipp Zabel
2015-01-23 16:39 ` Philipp Zabel
2015-01-23 16:39 ` Philipp Zabel
2015-01-23 16:41 ` Fabio Estevam
2015-01-23 16:41 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150123025643.GA11412@victor \
--to=ying.liu@freescale.com \
--cc=denis@eukrea.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabio.estevam@freescale.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=plagnioj@jcrosoft.com \
--cc=rmk+kernel@arm.linux.org.uk \
--cc=slongerbeam@gmail.com \
--cc=steve_longerbeam@mentor.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.