From: Pavel Machek <pavel@ucw.cz>
To: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>,
pali.rohar@gmail.com, sre@debian.org, sre@ring0.de,
kernel list <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-omap@vger.kernel.org, tony@atomide.com, khilman@kernel.org,
aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com
Subject: Re: 3.19 on Nokia n900: audio quality awful
Date: Thu, 29 Jan 2015 21:42:18 +0100 [thread overview]
Message-ID: <20150129204218.GC3962@amd> (raw)
In-Reply-To: <54CA173F.1070301@ti.com>
Hi!
> >> I did this:
> >>
> >> I'm not sure which one is "main" microphone and which is headset, but
> >> I guess 2V should be "close enough" to 2.5V to produce something
> >> different from zeros..?
> >>
> > Main or integrated is digital microphone which does AD conversion itself
> > and headset is analogue. If DMIC is without bias codec will sample plain
> > zeros from DMIC input but analogue input should always produce some random
> > LSB bits from codec's AD converter.
> >
> > If codec produces zeros also from analogue input then I suppose codec
> > ADC is not powered up or similar. One way to hunt regression if
> > bisecting is not possible due reason or another is to dump and diff codec
> > registers from /sys/kernel/debug/regmap/ using both working commit
> >and head.
I tried 2.6.28... where recording was, but it does not support
regmap. Then I tried 3.14, but could not get recording to work there.
> >> tlv320aic3x_aux: tlv320aic3x@19 {
> >> @@ -502,6 +504,8 @@
> >> DRVDD-supply = <&vmmc2>;
> >> IOVDD-supply = <&vio>;
> >> DVDD-supply = <&vio>;
> >> +
> >> + ai3x-micbias-vg = <1>;
> >> };
> > This should be 2, i.e. 2.5 V according to
> > Documentation/devicetree/bindings/sound/tlv320aic3x.txt. I think 2 V is
> > too low for some headset mics and that was the reason for 2.5 V.
Ok, tried that, but no change.
> Can you also try this patch to correct the DAPM route for the rx51:
Yes, with the patch below (and dts updates I did) recording works.
Another interesting note is that audio quality is not that horrible
when playing 8 kHz, mono signal... it is mostly what I'd
expect. Playing 44.1kHz, stereo mp3 .. is not good.
Tested-by: Pavel Machek <pavel@ucw.cz>
Thanks,
Pavel
> diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c
> index 04896d6252a2..7f299357c2d2 100644
> --- a/sound/soc/omap/rx51.c
> +++ b/sound/soc/omap/rx51.c
> @@ -250,14 +250,14 @@ static const struct snd_soc_dapm_route audio_map[] = {
> {"FM Transmitter", NULL, "LLOUT"},
> {"FM Transmitter", NULL, "RLOUT"},
>
> - {"DMic Rate 64", NULL, "Mic Bias"},
> - {"Mic Bias", NULL, "DMic"},
> + {"DMic Rate 64", NULL, "DMic"},
> + {"DMic", NULL, "Mic Bias"},
>
> {"b LINE2R", NULL, "MONO_LOUT"},
> {"Earphone", NULL, "b HPLOUT"},
>
> - {"LINE1L", NULL, "b Mic Bias"},
> - {"b Mic Bias", NULL, "HS Mic"}
> + {"LINE1L", NULL, "HS Mic"},
> + {"HS Mic", NULL, "b Mic Bias"},
> };
>
> static const char * const spk_function[] = {"Off", "On"};
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
WARNING: multiple messages have this Message-ID (diff)
From: pavel@ucw.cz (Pavel Machek)
To: linux-arm-kernel@lists.infradead.org
Subject: 3.19 on Nokia n900: audio quality awful
Date: Thu, 29 Jan 2015 21:42:18 +0100 [thread overview]
Message-ID: <20150129204218.GC3962@amd> (raw)
In-Reply-To: <54CA173F.1070301@ti.com>
Hi!
> >> I did this:
> >>
> >> I'm not sure which one is "main" microphone and which is headset, but
> >> I guess 2V should be "close enough" to 2.5V to produce something
> >> different from zeros..?
> >>
> > Main or integrated is digital microphone which does AD conversion itself
> > and headset is analogue. If DMIC is without bias codec will sample plain
> > zeros from DMIC input but analogue input should always produce some random
> > LSB bits from codec's AD converter.
> >
> > If codec produces zeros also from analogue input then I suppose codec
> > ADC is not powered up or similar. One way to hunt regression if
> > bisecting is not possible due reason or another is to dump and diff codec
> > registers from /sys/kernel/debug/regmap/ using both working commit
> >and head.
I tried 2.6.28... where recording was, but it does not support
regmap. Then I tried 3.14, but could not get recording to work there.
> >> tlv320aic3x_aux: tlv320aic3x at 19 {
> >> @@ -502,6 +504,8 @@
> >> DRVDD-supply = <&vmmc2>;
> >> IOVDD-supply = <&vio>;
> >> DVDD-supply = <&vio>;
> >> +
> >> + ai3x-micbias-vg = <1>;
> >> };
> > This should be 2, i.e. 2.5 V according to
> > Documentation/devicetree/bindings/sound/tlv320aic3x.txt. I think 2 V is
> > too low for some headset mics and that was the reason for 2.5 V.
Ok, tried that, but no change.
> Can you also try this patch to correct the DAPM route for the rx51:
Yes, with the patch below (and dts updates I did) recording works.
Another interesting note is that audio quality is not that horrible
when playing 8 kHz, mono signal... it is mostly what I'd
expect. Playing 44.1kHz, stereo mp3 .. is not good.
Tested-by: Pavel Machek <pavel@ucw.cz>
Thanks,
Pavel
> diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c
> index 04896d6252a2..7f299357c2d2 100644
> --- a/sound/soc/omap/rx51.c
> +++ b/sound/soc/omap/rx51.c
> @@ -250,14 +250,14 @@ static const struct snd_soc_dapm_route audio_map[] = {
> {"FM Transmitter", NULL, "LLOUT"},
> {"FM Transmitter", NULL, "RLOUT"},
>
> - {"DMic Rate 64", NULL, "Mic Bias"},
> - {"Mic Bias", NULL, "DMic"},
> + {"DMic Rate 64", NULL, "DMic"},
> + {"DMic", NULL, "Mic Bias"},
>
> {"b LINE2R", NULL, "MONO_LOUT"},
> {"Earphone", NULL, "b HPLOUT"},
>
> - {"LINE1L", NULL, "b Mic Bias"},
> - {"b Mic Bias", NULL, "HS Mic"}
> + {"LINE1L", NULL, "HS Mic"},
> + {"HS Mic", NULL, "b Mic Bias"},
> };
>
> static const char * const spk_function[] = {"Off", "On"};
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next prev parent reply other threads:[~2015-01-29 20:42 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-06 17:04 3.19 on Nokia n900: audio quality awful Pavel Machek
2015-01-06 17:04 ` Pavel Machek
2015-01-06 17:25 ` Felipe Balbi
2015-01-06 17:25 ` Felipe Balbi
2015-01-06 17:25 ` Felipe Balbi
2015-01-06 17:51 ` Pavel Machek
2015-01-06 17:51 ` Pavel Machek
2015-01-06 20:28 ` Felipe Balbi
2015-01-06 20:28 ` Felipe Balbi
2015-01-06 20:28 ` Felipe Balbi
2015-01-06 20:50 ` Pavel Machek
2015-01-06 20:50 ` Pavel Machek
2015-01-06 20:54 ` Felipe Balbi
2015-01-06 20:54 ` Felipe Balbi
2015-01-06 20:54 ` Felipe Balbi
2015-01-06 21:57 ` Pavel Machek
2015-01-06 21:57 ` Pavel Machek
2015-01-06 22:02 ` Felipe Balbi
2015-01-06 22:02 ` Felipe Balbi
2015-01-06 22:02 ` Felipe Balbi
2015-01-06 20:57 ` Aaro Koskinen
2015-01-06 20:57 ` Aaro Koskinen
2015-01-06 22:08 ` Pavel Machek
2015-01-06 22:08 ` Pavel Machek
2015-01-06 22:27 ` Aaro Koskinen
2015-01-06 22:27 ` Aaro Koskinen
2015-01-06 22:46 ` Felipe Balbi
2015-01-06 22:46 ` Felipe Balbi
2015-01-06 22:46 ` Felipe Balbi
2015-01-06 22:52 ` Tony Lindgren
2015-01-06 22:52 ` Tony Lindgren
2015-01-06 22:56 ` Pavel Machek
2015-01-06 22:56 ` Pavel Machek
2015-01-06 23:04 ` Felipe Balbi
2015-01-06 23:04 ` Felipe Balbi
2015-01-06 23:04 ` Felipe Balbi
2015-01-06 23:13 ` Pavel Machek
2015-01-06 23:13 ` Pavel Machek
2015-01-06 23:29 ` Felipe Balbi
2015-01-06 23:29 ` Felipe Balbi
2015-01-06 23:29 ` Felipe Balbi
2015-01-06 22:58 ` Pavel Machek
2015-01-06 22:58 ` Pavel Machek
2015-01-07 19:43 ` Aaro Koskinen
2015-01-07 19:43 ` Aaro Koskinen
2015-01-06 20:39 ` Aaro Koskinen
2015-01-06 20:39 ` Aaro Koskinen
2015-01-18 12:01 ` Pavel Machek
2015-01-18 12:01 ` Pavel Machek
2015-01-26 13:20 ` Peter Ujfalusi
2015-01-26 13:20 ` Peter Ujfalusi
2015-01-26 13:20 ` Peter Ujfalusi
2015-01-28 18:15 ` Jarkko Nikula
2015-01-28 18:15 ` Jarkko Nikula
2015-01-28 22:41 ` Pavel Machek
2015-01-28 22:41 ` Pavel Machek
2015-01-28 22:41 ` Pavel Machek
2015-01-29 7:35 ` Jarkko Nikula
2015-01-29 7:35 ` Jarkko Nikula
2015-01-29 11:19 ` Peter Ujfalusi
2015-01-29 11:19 ` Peter Ujfalusi
2015-01-29 11:19 ` Peter Ujfalusi
2015-01-29 20:42 ` Pavel Machek [this message]
2015-01-29 20:42 ` Pavel Machek
2015-01-30 8:16 ` Pali Rohár
2015-01-30 8:16 ` Pali Rohár
2015-01-30 8:52 ` Pavel Machek
2015-01-30 8:52 ` Pavel Machek
2015-01-30 10:26 ` Pavel Machek
2015-01-30 10:26 ` Pavel Machek
2015-01-30 10:37 ` Pavel Machek
2015-01-30 10:37 ` Pavel Machek
2015-01-30 12:40 ` Peter Ujfalusi
2015-01-30 12:40 ` Peter Ujfalusi
2015-01-30 12:40 ` Peter Ujfalusi
2015-01-30 12:43 ` Peter Ujfalusi
2015-01-30 12:43 ` Peter Ujfalusi
2015-01-30 12:43 ` Peter Ujfalusi
2015-01-28 22:02 ` Pavel Machek
2015-01-28 22:02 ` Pavel Machek
2015-01-28 22:02 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150129204218.GC3962@amd \
--to=pavel@ucw.cz \
--cc=aaro.koskinen@iki.fi \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=jarkko.nikula@bitmer.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=peter.ujfalusi@ti.com \
--cc=sre@debian.org \
--cc=sre@ring0.de \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.