From: "Michael S. Tsirkin" <mst@redhat.com>
To: Jason Wang <jasowang@redhat.com>
Cc: pagupta@redhat.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
virtualization@lists.linux-foundation.org
Subject: Re: [PATCH RFC v5 net-next 4/6] virtio-net: add basic interrupt coalescing support
Date: Tue, 10 Feb 2015 11:25:42 +0100 [thread overview]
Message-ID: <20150210102542.GC9505@redhat.com> (raw)
In-Reply-To: <1423551090.897.1@smtp.corp.redhat.com>
On Tue, Feb 10, 2015 at 06:59:30AM +0008, Jason Wang wrote:
>
>
> On Tue, Feb 10, 2015 at 9:32 AM, Rusty Russell <rusty@rustcorp.com.au>
> wrote:
> >Jason Wang <jasowang@redhat.com> writes:
> >> This patch enables the interrupt coalescing setting through ethtool.
> >
> >The problem is that there's nothing network specific about interrupt
> >coalescing. I can see other devices wanting exactly the same thing,
> >which means we'd deprecate this in the next virtio standard.
> >
> >I think the right answer is to extend like we did with
> >vring_used_event(), eg:
> >
> >1) Add a new feature VIRTIO_F_RING_COALESCE.
> >2) Add another a 32-bit field after vring_used_event(), eg:
> > #define vring_used_delay(vr) (*(u32 *)((vr)->avail->ring[(vr)->num
> >+ 2]))
>
> Yes. This looks better and we don't even need device specific configuration
> method.
>
> >
> >This loses the ability to coalesce by number of frames, but we can still
> >do number of sg entries, as we do now with used_event, and we could
> >change virtqueue_enable_cb_delayed() to take a precise number if we
> >wanted.
>
> Can we give a device specific meaning for this? For virtio-net, we want to
> expose the coalescing settings through ethtool (tx-frames). And it was
> usually used with a timer, so probably another field after
> vring_used_delay() for this timer interval to trigger the interrupt if no
> new used buffers come after this interval.
I think what Rusty has in mind is precisely sticking the delay
in vring_used_delay.
> >
> >
> >My feeling is that this should be a v1.0-only feature though
> >(eg. feature bit 33).
>
> Yes it should.
>
> >
> >Cheers,
> >Rusty.
> >
> >> Cc: Rusty Russell <rusty@rustcorp.com.au>
> >> Cc: Michael S. Tsirkin <mst@redhat.com>
> >> Signed-off-by: Jason Wang <jasowang@redhat.com>
> >> ---
> >> drivers/net/virtio_net.c | 67
> >>+++++++++++++++++++++++++++++++++++++++++
> >> include/uapi/linux/virtio_net.h | 12 ++++++++
> >> 2 files changed, 79 insertions(+)
> >>
> >> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> >> index cc5f5de..2b958fb 100644
> >> --- a/drivers/net/virtio_net.c
> >> +++ b/drivers/net/virtio_net.c
> >> @@ -145,6 +145,11 @@ struct virtnet_info {
> >> /* Budget for polling tx completion */
> >> u32 tx_work_limit;
> >> +
> >> + __u32 rx_coalesce_usecs;
> >> + __u32 rx_max_coalesced_frames;
> >> + __u32 tx_coalesce_usecs;
> >> + __u32 tx_max_coalesced_frames;
> >> };
> >> struct padded_vnet_hdr {
> >> @@ -1404,12 +1409,73 @@ static void virtnet_get_channels(struct
> >>net_device *dev,
> >> channels->other_count = 0;
> >> }
> >> +static int virtnet_set_coalesce(struct net_device *dev,
> >> + struct ethtool_coalesce *ec)
> >> +{
> >> + struct virtnet_info *vi = netdev_priv(dev);
> >> + struct scatterlist sg;
> >> + struct virtio_net_ctrl_coalesce c;
> >> +
> >> + if (!vi->has_cvq ||
> >> + !virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_COALESCE))
> >> + return -EOPNOTSUPP;
> >> + if (vi->rx_coalesce_usecs != ec->rx_coalesce_usecs ||
> >> + vi->rx_max_coalesced_frames != ec->rx_max_coalesced_frames) {
> >> + c.coalesce_usecs = ec->rx_coalesce_usecs;
> >> + c.max_coalesced_frames = ec->rx_max_coalesced_frames;
> >> + sg_init_one(&sg, &c, sizeof(c));
> >> + if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_COALESCE,
> >> + VIRTIO_NET_CTRL_COALESCE_RX_SET,
> >> + &sg)) {
> >> + dev_warn(&dev->dev, "Fail to set rx coalescing\n");
> >> + return -EINVAL;
> >> + }
> >> + vi->rx_coalesce_usecs = ec->rx_coalesce_usecs;
> >> + vi->rx_max_coalesced_frames = ec->rx_max_coalesced_frames;
> >> + }
> >> +
> >> + if (vi->tx_coalesce_usecs != ec->tx_coalesce_usecs ||
> >> + vi->tx_max_coalesced_frames != ec->tx_max_coalesced_frames) {
> >> + c.coalesce_usecs = ec->tx_coalesce_usecs;
> >> + c.max_coalesced_frames = ec->tx_max_coalesced_frames;
> >> + sg_init_one(&sg, &c, sizeof(c));
> >> + if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_COALESCE,
> >> + VIRTIO_NET_CTRL_COALESCE_TX_SET,
> >> + &sg)) {
> >> + dev_warn(&dev->dev, "Fail to set tx coalescing\n");
> >> + return -EINVAL;
> >> + }
> >> + vi->tx_coalesce_usecs = ec->tx_coalesce_usecs;
> >> + vi->tx_max_coalesced_frames = ec->tx_max_coalesced_frames;
> >> + }
> >> +
> >> + vi->tx_work_limit = ec->tx_max_coalesced_frames_irq;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int virtnet_get_coalesce(struct net_device *dev,
> >> + struct ethtool_coalesce *ec)
> >> +{
> >> + struct virtnet_info *vi = netdev_priv(dev);
> >> +
> >> + ec->rx_coalesce_usecs = vi->rx_coalesce_usecs;
> >> + ec->rx_max_coalesced_frames = vi->rx_max_coalesced_frames;
> >> + ec->tx_coalesce_usecs = vi->tx_coalesce_usecs;
> >> + ec->tx_max_coalesced_frames = vi->tx_max_coalesced_frames;
> >> + ec->tx_max_coalesced_frames_irq = vi->tx_work_limit;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> static const struct ethtool_ops virtnet_ethtool_ops = {
> >> .get_drvinfo = virtnet_get_drvinfo,
> >> .get_link = ethtool_op_get_link,
> >> .get_ringparam = virtnet_get_ringparam,
> >> .set_channels = virtnet_set_channels,
> >> .get_channels = virtnet_get_channels,
> >> + .set_coalesce = virtnet_set_coalesce,
> >> + .get_coalesce = virtnet_get_coalesce,
> >> };
> >> #define MIN_MTU 68
> >> @@ -2048,6 +2114,7 @@ static unsigned int features[] = {
> >> VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ,
> >> VIRTIO_NET_F_CTRL_MAC_ADDR,
> >> VIRTIO_F_ANY_LAYOUT,
> >> + VIRTIO_NET_F_CTRL_COALESCE,
> >> };
> >> static struct virtio_driver virtio_net_driver = {
> >> diff --git a/include/uapi/linux/virtio_net.h
> >>b/include/uapi/linux/virtio_net.h
> >> index b5f1677..332009d 100644
> >> --- a/include/uapi/linux/virtio_net.h
> >> +++ b/include/uapi/linux/virtio_net.h
> >> @@ -34,6 +34,7 @@
> >> /* The feature bitmap for virtio net */
> >> #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
> >> #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial
> >>csum */
> >> +#define VIRTIO_NET_F_CTRL_COALESCE 3 /* Set coalescing */
> >> #define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
> >> #define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
> >> #define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
> >> @@ -202,4 +203,15 @@ struct virtio_net_ctrl_mq {
> >> #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
> >> #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
> >> +struct virtio_net_ctrl_coalesce {
> >> + __u32 coalesce_usecs;
> >> + __u32 max_coalesced_frames;
> >> +};
> >> +
> >> +#define VIRTIO_NET_CTRL_COALESCE 6
> >> + #define VIRTIO_NET_CTRL_COALESCE_TX_SET 0
> >> + #define VIRTIO_NET_CTRL_COALESCE_TX_GET 1
> >> + #define VIRTIO_NET_CTRL_COALESCE_RX_SET 2
> >> + #define VIRTIO_NET_CTRL_COALESCE_RX_GET 3
> >> +
> >> #endif /* _LINUX_VIRTIO_NET_H */
> >> -- 1.8.3.1
> >--
> >To unsubscribe from this list: send the line "unsubscribe netdev" in
> >the body of a message to majordomo@vger.kernel.org
> >More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Jason Wang <jasowang@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
virtualization@lists.linux-foundation.org, pagupta@redhat.com
Subject: Re: [PATCH RFC v5 net-next 4/6] virtio-net: add basic interrupt coalescing support
Date: Tue, 10 Feb 2015 11:25:42 +0100 [thread overview]
Message-ID: <20150210102542.GC9505@redhat.com> (raw)
In-Reply-To: <1423551090.897.1@smtp.corp.redhat.com>
On Tue, Feb 10, 2015 at 06:59:30AM +0008, Jason Wang wrote:
>
>
> On Tue, Feb 10, 2015 at 9:32 AM, Rusty Russell <rusty@rustcorp.com.au>
> wrote:
> >Jason Wang <jasowang@redhat.com> writes:
> >> This patch enables the interrupt coalescing setting through ethtool.
> >
> >The problem is that there's nothing network specific about interrupt
> >coalescing. I can see other devices wanting exactly the same thing,
> >which means we'd deprecate this in the next virtio standard.
> >
> >I think the right answer is to extend like we did with
> >vring_used_event(), eg:
> >
> >1) Add a new feature VIRTIO_F_RING_COALESCE.
> >2) Add another a 32-bit field after vring_used_event(), eg:
> > #define vring_used_delay(vr) (*(u32 *)((vr)->avail->ring[(vr)->num
> >+ 2]))
>
> Yes. This looks better and we don't even need device specific configuration
> method.
>
> >
> >This loses the ability to coalesce by number of frames, but we can still
> >do number of sg entries, as we do now with used_event, and we could
> >change virtqueue_enable_cb_delayed() to take a precise number if we
> >wanted.
>
> Can we give a device specific meaning for this? For virtio-net, we want to
> expose the coalescing settings through ethtool (tx-frames). And it was
> usually used with a timer, so probably another field after
> vring_used_delay() for this timer interval to trigger the interrupt if no
> new used buffers come after this interval.
I think what Rusty has in mind is precisely sticking the delay
in vring_used_delay.
> >
> >
> >My feeling is that this should be a v1.0-only feature though
> >(eg. feature bit 33).
>
> Yes it should.
>
> >
> >Cheers,
> >Rusty.
> >
> >> Cc: Rusty Russell <rusty@rustcorp.com.au>
> >> Cc: Michael S. Tsirkin <mst@redhat.com>
> >> Signed-off-by: Jason Wang <jasowang@redhat.com>
> >> ---
> >> drivers/net/virtio_net.c | 67
> >>+++++++++++++++++++++++++++++++++++++++++
> >> include/uapi/linux/virtio_net.h | 12 ++++++++
> >> 2 files changed, 79 insertions(+)
> >>
> >> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> >> index cc5f5de..2b958fb 100644
> >> --- a/drivers/net/virtio_net.c
> >> +++ b/drivers/net/virtio_net.c
> >> @@ -145,6 +145,11 @@ struct virtnet_info {
> >> /* Budget for polling tx completion */
> >> u32 tx_work_limit;
> >> +
> >> + __u32 rx_coalesce_usecs;
> >> + __u32 rx_max_coalesced_frames;
> >> + __u32 tx_coalesce_usecs;
> >> + __u32 tx_max_coalesced_frames;
> >> };
> >> struct padded_vnet_hdr {
> >> @@ -1404,12 +1409,73 @@ static void virtnet_get_channels(struct
> >>net_device *dev,
> >> channels->other_count = 0;
> >> }
> >> +static int virtnet_set_coalesce(struct net_device *dev,
> >> + struct ethtool_coalesce *ec)
> >> +{
> >> + struct virtnet_info *vi = netdev_priv(dev);
> >> + struct scatterlist sg;
> >> + struct virtio_net_ctrl_coalesce c;
> >> +
> >> + if (!vi->has_cvq ||
> >> + !virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_COALESCE))
> >> + return -EOPNOTSUPP;
> >> + if (vi->rx_coalesce_usecs != ec->rx_coalesce_usecs ||
> >> + vi->rx_max_coalesced_frames != ec->rx_max_coalesced_frames) {
> >> + c.coalesce_usecs = ec->rx_coalesce_usecs;
> >> + c.max_coalesced_frames = ec->rx_max_coalesced_frames;
> >> + sg_init_one(&sg, &c, sizeof(c));
> >> + if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_COALESCE,
> >> + VIRTIO_NET_CTRL_COALESCE_RX_SET,
> >> + &sg)) {
> >> + dev_warn(&dev->dev, "Fail to set rx coalescing\n");
> >> + return -EINVAL;
> >> + }
> >> + vi->rx_coalesce_usecs = ec->rx_coalesce_usecs;
> >> + vi->rx_max_coalesced_frames = ec->rx_max_coalesced_frames;
> >> + }
> >> +
> >> + if (vi->tx_coalesce_usecs != ec->tx_coalesce_usecs ||
> >> + vi->tx_max_coalesced_frames != ec->tx_max_coalesced_frames) {
> >> + c.coalesce_usecs = ec->tx_coalesce_usecs;
> >> + c.max_coalesced_frames = ec->tx_max_coalesced_frames;
> >> + sg_init_one(&sg, &c, sizeof(c));
> >> + if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_COALESCE,
> >> + VIRTIO_NET_CTRL_COALESCE_TX_SET,
> >> + &sg)) {
> >> + dev_warn(&dev->dev, "Fail to set tx coalescing\n");
> >> + return -EINVAL;
> >> + }
> >> + vi->tx_coalesce_usecs = ec->tx_coalesce_usecs;
> >> + vi->tx_max_coalesced_frames = ec->tx_max_coalesced_frames;
> >> + }
> >> +
> >> + vi->tx_work_limit = ec->tx_max_coalesced_frames_irq;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int virtnet_get_coalesce(struct net_device *dev,
> >> + struct ethtool_coalesce *ec)
> >> +{
> >> + struct virtnet_info *vi = netdev_priv(dev);
> >> +
> >> + ec->rx_coalesce_usecs = vi->rx_coalesce_usecs;
> >> + ec->rx_max_coalesced_frames = vi->rx_max_coalesced_frames;
> >> + ec->tx_coalesce_usecs = vi->tx_coalesce_usecs;
> >> + ec->tx_max_coalesced_frames = vi->tx_max_coalesced_frames;
> >> + ec->tx_max_coalesced_frames_irq = vi->tx_work_limit;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> static const struct ethtool_ops virtnet_ethtool_ops = {
> >> .get_drvinfo = virtnet_get_drvinfo,
> >> .get_link = ethtool_op_get_link,
> >> .get_ringparam = virtnet_get_ringparam,
> >> .set_channels = virtnet_set_channels,
> >> .get_channels = virtnet_get_channels,
> >> + .set_coalesce = virtnet_set_coalesce,
> >> + .get_coalesce = virtnet_get_coalesce,
> >> };
> >> #define MIN_MTU 68
> >> @@ -2048,6 +2114,7 @@ static unsigned int features[] = {
> >> VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ,
> >> VIRTIO_NET_F_CTRL_MAC_ADDR,
> >> VIRTIO_F_ANY_LAYOUT,
> >> + VIRTIO_NET_F_CTRL_COALESCE,
> >> };
> >> static struct virtio_driver virtio_net_driver = {
> >> diff --git a/include/uapi/linux/virtio_net.h
> >>b/include/uapi/linux/virtio_net.h
> >> index b5f1677..332009d 100644
> >> --- a/include/uapi/linux/virtio_net.h
> >> +++ b/include/uapi/linux/virtio_net.h
> >> @@ -34,6 +34,7 @@
> >> /* The feature bitmap for virtio net */
> >> #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
> >> #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial
> >>csum */
> >> +#define VIRTIO_NET_F_CTRL_COALESCE 3 /* Set coalescing */
> >> #define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
> >> #define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
> >> #define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
> >> @@ -202,4 +203,15 @@ struct virtio_net_ctrl_mq {
> >> #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
> >> #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
> >> +struct virtio_net_ctrl_coalesce {
> >> + __u32 coalesce_usecs;
> >> + __u32 max_coalesced_frames;
> >> +};
> >> +
> >> +#define VIRTIO_NET_CTRL_COALESCE 6
> >> + #define VIRTIO_NET_CTRL_COALESCE_TX_SET 0
> >> + #define VIRTIO_NET_CTRL_COALESCE_TX_GET 1
> >> + #define VIRTIO_NET_CTRL_COALESCE_RX_SET 2
> >> + #define VIRTIO_NET_CTRL_COALESCE_RX_GET 3
> >> +
> >> #endif /* _LINUX_VIRTIO_NET_H */
> >> -- 1.8.3.1
> >--
> >To unsubscribe from this list: send the line "unsubscribe netdev" in
> >the body of a message to majordomo@vger.kernel.org
> >More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-02-10 10:25 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-09 8:39 [PATCH RFC v5 net-next 0/6] enable tx interrupts for virtio-net Jason Wang
2015-02-09 8:39 ` Jason Wang
2015-02-09 8:39 ` [PATCH RFC v5 net-next 1/6] virtio_ring: fix virtqueue_enable_cb() when only 1 buffers were pending Jason Wang
2015-02-09 8:39 ` Jason Wang
2015-02-10 1:03 ` Rusty Russell
2015-02-10 6:26 ` Jason Wang
2015-02-10 6:26 ` Jason Wang
2015-02-10 10:18 ` Michael S. Tsirkin
2015-02-10 10:18 ` Michael S. Tsirkin
2015-02-10 23:58 ` Rusty Russell
2015-02-10 23:58 ` Rusty Russell
2015-02-11 5:41 ` Jason Wang
2015-02-11 5:41 ` Jason Wang
2015-02-09 8:39 ` [PATCH RFC v5 net-next 2/6] virtio_ring: try to disable event index callbacks in virtqueue_disable_cb() Jason Wang
2015-02-09 8:39 ` Jason Wang
2015-02-10 1:07 ` Rusty Russell
2015-02-10 10:24 ` Michael S. Tsirkin
2015-02-10 10:24 ` Michael S. Tsirkin
2015-02-11 5:55 ` Jason Wang
2015-02-11 5:55 ` Jason Wang
2015-02-09 8:39 ` [PATCH RFC v5 net-next 3/6] virtio_net: enable tx interrupt Jason Wang
2015-02-09 8:39 ` Jason Wang
2015-02-09 8:39 ` [PATCH RFC v5 net-next 4/6] virtio-net: add basic interrupt coalescing support Jason Wang
2015-02-09 8:39 ` Jason Wang
2015-02-10 1:32 ` Rusty Russell
2015-02-10 1:32 ` Rusty Russell
2015-02-10 6:51 ` Jason Wang
2015-02-10 6:51 ` Jason Wang
2015-02-10 10:25 ` Michael S. Tsirkin [this message]
2015-02-10 10:25 ` Michael S. Tsirkin
2015-02-10 10:40 ` Michael S. Tsirkin
2015-02-10 10:40 ` Michael S. Tsirkin
2015-02-13 2:52 ` Rusty Russell
2015-02-13 12:41 ` Pawel Moll
2015-02-13 12:41 ` Pawel Moll
2015-02-16 3:07 ` Rusty Russell
2015-02-16 3:07 ` Rusty Russell
2015-02-13 18:19 ` Cornelia Huck
2015-02-13 18:19 ` Cornelia Huck
2015-02-16 3:19 ` Rusty Russell
2015-02-16 3:19 ` Rusty Russell
2015-02-13 2:52 ` Rusty Russell
2015-02-09 8:39 ` [PATCH RFC v5 net-next 5/6] vhost: let vhost_signal() returns whether signalled Jason Wang
2015-02-09 8:39 ` Jason Wang
2015-02-09 8:39 ` [PATCH RFC v5 net-next 6/6] vhost_net: interrupt coalescing support Jason Wang
2015-02-09 8:39 ` Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150210102542.GC9505@redhat.com \
--to=mst@redhat.com \
--cc=jasowang@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pagupta@redhat.com \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.