All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rusty Russell <rusty@rustcorp.com.au>
To: Jason Wang <jasowang@redhat.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	virtualization@lists.linux-foundation.org, mst@redhat.com
Cc: pagupta@redhat.com
Subject: Re: [PATCH RFC v5 net-next 4/6] virtio-net: add basic interrupt coalescing support
Date: Tue, 10 Feb 2015 12:02:37 +1030	[thread overview]
Message-ID: <87386ey2iy.fsf@rustcorp.com.au> (raw)
In-Reply-To: <1423471165-34243-5-git-send-email-jasowang@redhat.com>

Jason Wang <jasowang@redhat.com> writes:
> This patch enables the interrupt coalescing setting through ethtool.

The problem is that there's nothing network specific about interrupt
coalescing.  I can see other devices wanting exactly the same thing,
which means we'd deprecate this in the next virtio standard.

I think the right answer is to extend like we did with
vring_used_event(), eg:

1) Add a new feature VIRTIO_F_RING_COALESCE.
2) Add another a 32-bit field after vring_used_event(), eg:
        #define vring_used_delay(vr) (*(u32 *)((vr)->avail->ring[(vr)->num + 2]))

This loses the ability to coalesce by number of frames, but we can still
do number of sg entries, as we do now with used_event, and we could
change virtqueue_enable_cb_delayed() to take a precise number if we
wanted.

My feeling is that this should be a v1.0-only feature though
(eg. feature bit 33).

Cheers,
Rusty.

> Cc: Rusty Russell <rusty@rustcorp.com.au>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
>  drivers/net/virtio_net.c        | 67 +++++++++++++++++++++++++++++++++++++++++
>  include/uapi/linux/virtio_net.h | 12 ++++++++
>  2 files changed, 79 insertions(+)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index cc5f5de..2b958fb 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -145,6 +145,11 @@ struct virtnet_info {
>  
>  	/* Budget for polling tx completion */
>  	u32 tx_work_limit;
> +
> +	__u32 rx_coalesce_usecs;
> +	__u32 rx_max_coalesced_frames;
> +	__u32 tx_coalesce_usecs;
> +	__u32 tx_max_coalesced_frames;
>  };
>  
>  struct padded_vnet_hdr {
> @@ -1404,12 +1409,73 @@ static void virtnet_get_channels(struct net_device *dev,
>  	channels->other_count = 0;
>  }
>  
> +static int virtnet_set_coalesce(struct net_device *dev,
> +				struct ethtool_coalesce *ec)
> +{
> +	struct virtnet_info *vi = netdev_priv(dev);
> +	struct scatterlist sg;
> +	struct virtio_net_ctrl_coalesce c;
> +
> +	if (!vi->has_cvq ||
> +	    !virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_COALESCE))
> +		return -EOPNOTSUPP;
> +	if (vi->rx_coalesce_usecs != ec->rx_coalesce_usecs ||
> +	    vi->rx_max_coalesced_frames != ec->rx_max_coalesced_frames) {
> +		c.coalesce_usecs = ec->rx_coalesce_usecs;
> +		c.max_coalesced_frames = ec->rx_max_coalesced_frames;
> +		sg_init_one(&sg, &c, sizeof(c));
> +		if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_COALESCE,
> +					  VIRTIO_NET_CTRL_COALESCE_RX_SET,
> +					  &sg)) {
> +			dev_warn(&dev->dev, "Fail to set rx coalescing\n");
> +			return -EINVAL;
> +		}
> +		vi->rx_coalesce_usecs = ec->rx_coalesce_usecs;
> +		vi->rx_max_coalesced_frames = ec->rx_max_coalesced_frames;
> +	}
> +
> +	if (vi->tx_coalesce_usecs != ec->tx_coalesce_usecs ||
> +	    vi->tx_max_coalesced_frames != ec->tx_max_coalesced_frames) {
> +		c.coalesce_usecs = ec->tx_coalesce_usecs;
> +		c.max_coalesced_frames = ec->tx_max_coalesced_frames;
> +		sg_init_one(&sg, &c, sizeof(c));
> +		if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_COALESCE,
> +					  VIRTIO_NET_CTRL_COALESCE_TX_SET,
> +					  &sg)) {
> +			dev_warn(&dev->dev, "Fail to set tx coalescing\n");
> +			return -EINVAL;
> +		}
> +		vi->tx_coalesce_usecs = ec->tx_coalesce_usecs;
> +		vi->tx_max_coalesced_frames = ec->tx_max_coalesced_frames;
> +	}
> +
> +	vi->tx_work_limit = ec->tx_max_coalesced_frames_irq;
> +
> +	return 0;
> +}
> +
> +static int virtnet_get_coalesce(struct net_device *dev,
> +				struct ethtool_coalesce *ec)
> +{
> +	struct virtnet_info *vi = netdev_priv(dev);
> +
> +	ec->rx_coalesce_usecs = vi->rx_coalesce_usecs;
> +	ec->rx_max_coalesced_frames = vi->rx_max_coalesced_frames;
> +	ec->tx_coalesce_usecs = vi->tx_coalesce_usecs;
> +	ec->tx_max_coalesced_frames = vi->tx_max_coalesced_frames;
> +	ec->tx_max_coalesced_frames_irq = vi->tx_work_limit;
> +
> +	return 0;
> +}
> +
>  static const struct ethtool_ops virtnet_ethtool_ops = {
>  	.get_drvinfo = virtnet_get_drvinfo,
>  	.get_link = ethtool_op_get_link,
>  	.get_ringparam = virtnet_get_ringparam,
>  	.set_channels = virtnet_set_channels,
>  	.get_channels = virtnet_get_channels,
> +	.set_coalesce = virtnet_set_coalesce,
> +	.get_coalesce = virtnet_get_coalesce,
>  };
>  
>  #define MIN_MTU 68
> @@ -2048,6 +2114,7 @@ static unsigned int features[] = {
>  	VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ,
>  	VIRTIO_NET_F_CTRL_MAC_ADDR,
>  	VIRTIO_F_ANY_LAYOUT,
> +	VIRTIO_NET_F_CTRL_COALESCE,
>  };
>  
>  static struct virtio_driver virtio_net_driver = {
> diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
> index b5f1677..332009d 100644
> --- a/include/uapi/linux/virtio_net.h
> +++ b/include/uapi/linux/virtio_net.h
> @@ -34,6 +34,7 @@
>  /* The feature bitmap for virtio net */
>  #define VIRTIO_NET_F_CSUM	0	/* Host handles pkts w/ partial csum */
>  #define VIRTIO_NET_F_GUEST_CSUM	1	/* Guest handles pkts w/ partial csum */
> +#define VIRTIO_NET_F_CTRL_COALESCE 3	/* Set coalescing */
>  #define VIRTIO_NET_F_MAC	5	/* Host has given MAC address. */
>  #define VIRTIO_NET_F_GSO	6	/* Host handles pkts w/ any GSO type */
>  #define VIRTIO_NET_F_GUEST_TSO4	7	/* Guest can handle TSOv4 in. */
> @@ -202,4 +203,15 @@ struct virtio_net_ctrl_mq {
>   #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN        1
>   #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX        0x8000
>  
> +struct virtio_net_ctrl_coalesce {
> +	__u32 coalesce_usecs;
> +	__u32 max_coalesced_frames;
> +};
> +
> +#define VIRTIO_NET_CTRL_COALESCE 6
> + #define VIRTIO_NET_CTRL_COALESCE_TX_SET 0
> + #define VIRTIO_NET_CTRL_COALESCE_TX_GET 1
> + #define VIRTIO_NET_CTRL_COALESCE_RX_SET 2
> + #define VIRTIO_NET_CTRL_COALESCE_RX_GET 3
> +
>  #endif /* _LINUX_VIRTIO_NET_H */
> -- 
> 1.8.3.1

WARNING: multiple messages have this Message-ID (diff)
From: Rusty Russell <rusty@rustcorp.com.au>
To: Jason Wang <jasowang@redhat.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	virtualization@lists.linux-foundation.org, mst@redhat.com
Cc: pagupta@redhat.com, Jason Wang <jasowang@redhat.com>
Subject: Re: [PATCH RFC v5 net-next 4/6] virtio-net: add basic interrupt coalescing support
Date: Tue, 10 Feb 2015 12:02:37 +1030	[thread overview]
Message-ID: <87386ey2iy.fsf@rustcorp.com.au> (raw)
In-Reply-To: <1423471165-34243-5-git-send-email-jasowang@redhat.com>

Jason Wang <jasowang@redhat.com> writes:
> This patch enables the interrupt coalescing setting through ethtool.

The problem is that there's nothing network specific about interrupt
coalescing.  I can see other devices wanting exactly the same thing,
which means we'd deprecate this in the next virtio standard.

I think the right answer is to extend like we did with
vring_used_event(), eg:

1) Add a new feature VIRTIO_F_RING_COALESCE.
2) Add another a 32-bit field after vring_used_event(), eg:
        #define vring_used_delay(vr) (*(u32 *)((vr)->avail->ring[(vr)->num + 2]))

This loses the ability to coalesce by number of frames, but we can still
do number of sg entries, as we do now with used_event, and we could
change virtqueue_enable_cb_delayed() to take a precise number if we
wanted.

My feeling is that this should be a v1.0-only feature though
(eg. feature bit 33).

Cheers,
Rusty.

> Cc: Rusty Russell <rusty@rustcorp.com.au>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
>  drivers/net/virtio_net.c        | 67 +++++++++++++++++++++++++++++++++++++++++
>  include/uapi/linux/virtio_net.h | 12 ++++++++
>  2 files changed, 79 insertions(+)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index cc5f5de..2b958fb 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -145,6 +145,11 @@ struct virtnet_info {
>  
>  	/* Budget for polling tx completion */
>  	u32 tx_work_limit;
> +
> +	__u32 rx_coalesce_usecs;
> +	__u32 rx_max_coalesced_frames;
> +	__u32 tx_coalesce_usecs;
> +	__u32 tx_max_coalesced_frames;
>  };
>  
>  struct padded_vnet_hdr {
> @@ -1404,12 +1409,73 @@ static void virtnet_get_channels(struct net_device *dev,
>  	channels->other_count = 0;
>  }
>  
> +static int virtnet_set_coalesce(struct net_device *dev,
> +				struct ethtool_coalesce *ec)
> +{
> +	struct virtnet_info *vi = netdev_priv(dev);
> +	struct scatterlist sg;
> +	struct virtio_net_ctrl_coalesce c;
> +
> +	if (!vi->has_cvq ||
> +	    !virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_COALESCE))
> +		return -EOPNOTSUPP;
> +	if (vi->rx_coalesce_usecs != ec->rx_coalesce_usecs ||
> +	    vi->rx_max_coalesced_frames != ec->rx_max_coalesced_frames) {
> +		c.coalesce_usecs = ec->rx_coalesce_usecs;
> +		c.max_coalesced_frames = ec->rx_max_coalesced_frames;
> +		sg_init_one(&sg, &c, sizeof(c));
> +		if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_COALESCE,
> +					  VIRTIO_NET_CTRL_COALESCE_RX_SET,
> +					  &sg)) {
> +			dev_warn(&dev->dev, "Fail to set rx coalescing\n");
> +			return -EINVAL;
> +		}
> +		vi->rx_coalesce_usecs = ec->rx_coalesce_usecs;
> +		vi->rx_max_coalesced_frames = ec->rx_max_coalesced_frames;
> +	}
> +
> +	if (vi->tx_coalesce_usecs != ec->tx_coalesce_usecs ||
> +	    vi->tx_max_coalesced_frames != ec->tx_max_coalesced_frames) {
> +		c.coalesce_usecs = ec->tx_coalesce_usecs;
> +		c.max_coalesced_frames = ec->tx_max_coalesced_frames;
> +		sg_init_one(&sg, &c, sizeof(c));
> +		if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_COALESCE,
> +					  VIRTIO_NET_CTRL_COALESCE_TX_SET,
> +					  &sg)) {
> +			dev_warn(&dev->dev, "Fail to set tx coalescing\n");
> +			return -EINVAL;
> +		}
> +		vi->tx_coalesce_usecs = ec->tx_coalesce_usecs;
> +		vi->tx_max_coalesced_frames = ec->tx_max_coalesced_frames;
> +	}
> +
> +	vi->tx_work_limit = ec->tx_max_coalesced_frames_irq;
> +
> +	return 0;
> +}
> +
> +static int virtnet_get_coalesce(struct net_device *dev,
> +				struct ethtool_coalesce *ec)
> +{
> +	struct virtnet_info *vi = netdev_priv(dev);
> +
> +	ec->rx_coalesce_usecs = vi->rx_coalesce_usecs;
> +	ec->rx_max_coalesced_frames = vi->rx_max_coalesced_frames;
> +	ec->tx_coalesce_usecs = vi->tx_coalesce_usecs;
> +	ec->tx_max_coalesced_frames = vi->tx_max_coalesced_frames;
> +	ec->tx_max_coalesced_frames_irq = vi->tx_work_limit;
> +
> +	return 0;
> +}
> +
>  static const struct ethtool_ops virtnet_ethtool_ops = {
>  	.get_drvinfo = virtnet_get_drvinfo,
>  	.get_link = ethtool_op_get_link,
>  	.get_ringparam = virtnet_get_ringparam,
>  	.set_channels = virtnet_set_channels,
>  	.get_channels = virtnet_get_channels,
> +	.set_coalesce = virtnet_set_coalesce,
> +	.get_coalesce = virtnet_get_coalesce,
>  };
>  
>  #define MIN_MTU 68
> @@ -2048,6 +2114,7 @@ static unsigned int features[] = {
>  	VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ,
>  	VIRTIO_NET_F_CTRL_MAC_ADDR,
>  	VIRTIO_F_ANY_LAYOUT,
> +	VIRTIO_NET_F_CTRL_COALESCE,
>  };
>  
>  static struct virtio_driver virtio_net_driver = {
> diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
> index b5f1677..332009d 100644
> --- a/include/uapi/linux/virtio_net.h
> +++ b/include/uapi/linux/virtio_net.h
> @@ -34,6 +34,7 @@
>  /* The feature bitmap for virtio net */
>  #define VIRTIO_NET_F_CSUM	0	/* Host handles pkts w/ partial csum */
>  #define VIRTIO_NET_F_GUEST_CSUM	1	/* Guest handles pkts w/ partial csum */
> +#define VIRTIO_NET_F_CTRL_COALESCE 3	/* Set coalescing */
>  #define VIRTIO_NET_F_MAC	5	/* Host has given MAC address. */
>  #define VIRTIO_NET_F_GSO	6	/* Host handles pkts w/ any GSO type */
>  #define VIRTIO_NET_F_GUEST_TSO4	7	/* Guest can handle TSOv4 in. */
> @@ -202,4 +203,15 @@ struct virtio_net_ctrl_mq {
>   #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN        1
>   #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX        0x8000
>  
> +struct virtio_net_ctrl_coalesce {
> +	__u32 coalesce_usecs;
> +	__u32 max_coalesced_frames;
> +};
> +
> +#define VIRTIO_NET_CTRL_COALESCE 6
> + #define VIRTIO_NET_CTRL_COALESCE_TX_SET 0
> + #define VIRTIO_NET_CTRL_COALESCE_TX_GET 1
> + #define VIRTIO_NET_CTRL_COALESCE_RX_SET 2
> + #define VIRTIO_NET_CTRL_COALESCE_RX_GET 3
> +
>  #endif /* _LINUX_VIRTIO_NET_H */
> -- 
> 1.8.3.1

  reply	other threads:[~2015-02-10  1:32 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-09  8:39 [PATCH RFC v5 net-next 0/6] enable tx interrupts for virtio-net Jason Wang
2015-02-09  8:39 ` Jason Wang
2015-02-09  8:39 ` [PATCH RFC v5 net-next 1/6] virtio_ring: fix virtqueue_enable_cb() when only 1 buffers were pending Jason Wang
2015-02-09  8:39   ` Jason Wang
2015-02-10  1:03   ` Rusty Russell
2015-02-10  6:26     ` Jason Wang
2015-02-10  6:26       ` Jason Wang
2015-02-10 10:18     ` Michael S. Tsirkin
2015-02-10 10:18       ` Michael S. Tsirkin
2015-02-10 23:58       ` Rusty Russell
2015-02-10 23:58         ` Rusty Russell
2015-02-11  5:41       ` Jason Wang
2015-02-11  5:41         ` Jason Wang
2015-02-09  8:39 ` [PATCH RFC v5 net-next 2/6] virtio_ring: try to disable event index callbacks in virtqueue_disable_cb() Jason Wang
2015-02-09  8:39   ` Jason Wang
2015-02-10  1:07   ` Rusty Russell
2015-02-10 10:24   ` Michael S. Tsirkin
2015-02-10 10:24     ` Michael S. Tsirkin
2015-02-11  5:55     ` Jason Wang
2015-02-11  5:55     ` Jason Wang
2015-02-09  8:39 ` [PATCH RFC v5 net-next 3/6] virtio_net: enable tx interrupt Jason Wang
2015-02-09  8:39   ` Jason Wang
2015-02-09  8:39 ` [PATCH RFC v5 net-next 4/6] virtio-net: add basic interrupt coalescing support Jason Wang
2015-02-09  8:39   ` Jason Wang
2015-02-10  1:32   ` Rusty Russell [this message]
2015-02-10  1:32     ` Rusty Russell
2015-02-10  6:51     ` Jason Wang
2015-02-10  6:51       ` Jason Wang
2015-02-10 10:25       ` Michael S. Tsirkin
2015-02-10 10:25         ` Michael S. Tsirkin
2015-02-10 10:40     ` Michael S. Tsirkin
2015-02-10 10:40       ` Michael S. Tsirkin
2015-02-13  2:52       ` Rusty Russell
2015-02-13 12:41         ` Pawel Moll
2015-02-16  3:07           ` Rusty Russell
2015-02-16  3:07             ` Rusty Russell
2015-02-13 12:41         ` Pawel Moll
2015-02-13 18:19         ` Cornelia Huck
2015-02-13 18:19           ` Cornelia Huck
2015-02-16  3:19           ` Rusty Russell
2015-02-16  3:19           ` Rusty Russell
2015-02-13  2:52       ` Rusty Russell
2015-02-09  8:39 ` [PATCH RFC v5 net-next 5/6] vhost: let vhost_signal() returns whether signalled Jason Wang
2015-02-09  8:39 ` Jason Wang
2015-02-09  8:39 ` [PATCH RFC v5 net-next 6/6] vhost_net: interrupt coalescing support Jason Wang
2015-02-09  8:39   ` Jason Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87386ey2iy.fsf@rustcorp.com.au \
    --to=rusty@rustcorp.com.au \
    --cc=jasowang@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=pagupta@redhat.com \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.