From: Simon Horman <horms@verge.net.au>
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Magnus Damm <magnus.damm@gmail.com>,
linux-sh@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
alsa-devel@alsa-project.org
Subject: Re: [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format
Date: Wed, 11 Feb 2015 09:28:05 +0900 [thread overview]
Message-ID: <20150211002802.GC7826@verge.net.au> (raw)
In-Reply-To: <87d25wg804.wl%kuninori.morimoto.gx@renesas.com>
On Fri, Jan 30, 2015 at 05:18:56AM +0000, Kuninori Morimoto wrote:
>
> Hi Lars, Simon
>
> > The DAI link format should be specified for the whole link rather than just
> > one component on the link. So move the format specification for the HDMI
> > audio link from the CPU component to the link itself.
> >
> > Since the sh-mobile-hdmi DAI driver doesn't implement the set_fmt() callback
> > in this case there is no functional difference between only specifying the
> > the format for the CPU side or for the whole link, but the later it will
> > allow us to remove support for just specifying the format for one component.
> >
> > Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> > ---
>
> I tested these 3 patches on armadillo800eva
>
> [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format
> [PATCH v2 2/3] ASoC: sh: fsi: Fix clock inversion
> [PATCH v2 3/3] ASoC: simple-card: Remove support for setting differing DAI formats
>
> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> 2/3 patch changed behavior for clock inversion on FSI driver.
> FSI + wm8978 on armadillo800eva worked without any issues,
> but, I don't know how much effect it has for other board.
> We used this inversion flags on each board for historical reasons (copy-paste),
> but, almost all these were not needed (except some picky board) on FSI.
> Maybe Lars's 2/3 patch is correct, but, it is difficult to check/confirm for all boards.
> And unfortunately, Renesas don't use FSI anymore.
> So, I think keeping current FSI driver as-is is more safety for old boards.
> armadillo800eva works well with below patch (as 2/3 patch)
Thanks, I am inclined to agree that it is best to leave things unchanged.
>
> --------------
> diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
> index 75de26c..36aaeb1 100644
> --- a/arch/arm/mach-shmobile/board-armadillo800eva.c
> +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
> @@ -1015,7 +1015,6 @@ static struct asoc_simple_card_info fsi_wm8978_info = {
> .platform = "sh_fsi2",
> .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
> .cpu_dai = {
> - .fmt = SND_SOC_DAIFMT_IB_NF,
> .name = "fsia-dai",
> },
> .codec_dai = {
> --------------
>
WARNING: multiple messages have this Message-ID (diff)
From: Simon Horman <horms@verge.net.au>
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Magnus Damm <magnus.damm@gmail.com>,
linux-sh@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
alsa-devel@alsa-project.org
Subject: Re: [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format
Date: Wed, 11 Feb 2015 00:28:05 +0000 [thread overview]
Message-ID: <20150211002802.GC7826@verge.net.au> (raw)
In-Reply-To: <87d25wg804.wl%kuninori.morimoto.gx@renesas.com>
On Fri, Jan 30, 2015 at 05:18:56AM +0000, Kuninori Morimoto wrote:
>
> Hi Lars, Simon
>
> > The DAI link format should be specified for the whole link rather than just
> > one component on the link. So move the format specification for the HDMI
> > audio link from the CPU component to the link itself.
> >
> > Since the sh-mobile-hdmi DAI driver doesn't implement the set_fmt() callback
> > in this case there is no functional difference between only specifying the
> > the format for the CPU side or for the whole link, but the later it will
> > allow us to remove support for just specifying the format for one component.
> >
> > Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> > ---
>
> I tested these 3 patches on armadillo800eva
>
> [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format
> [PATCH v2 2/3] ASoC: sh: fsi: Fix clock inversion
> [PATCH v2 3/3] ASoC: simple-card: Remove support for setting differing DAI formats
>
> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> 2/3 patch changed behavior for clock inversion on FSI driver.
> FSI + wm8978 on armadillo800eva worked without any issues,
> but, I don't know how much effect it has for other board.
> We used this inversion flags on each board for historical reasons (copy-paste),
> but, almost all these were not needed (except some picky board) on FSI.
> Maybe Lars's 2/3 patch is correct, but, it is difficult to check/confirm for all boards.
> And unfortunately, Renesas don't use FSI anymore.
> So, I think keeping current FSI driver as-is is more safety for old boards.
> armadillo800eva works well with below patch (as 2/3 patch)
Thanks, I am inclined to agree that it is best to leave things unchanged.
>
> --------------
> diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
> index 75de26c..36aaeb1 100644
> --- a/arch/arm/mach-shmobile/board-armadillo800eva.c
> +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
> @@ -1015,7 +1015,6 @@ static struct asoc_simple_card_info fsi_wm8978_info = {
> .platform = "sh_fsi2",
> .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
> .cpu_dai = {
> - .fmt = SND_SOC_DAIFMT_IB_NF,
> .name = "fsia-dai",
> },
> .codec_dai = {
> --------------
>
WARNING: multiple messages have this Message-ID (diff)
From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format
Date: Wed, 11 Feb 2015 09:28:05 +0900 [thread overview]
Message-ID: <20150211002802.GC7826@verge.net.au> (raw)
In-Reply-To: <87d25wg804.wl%kuninori.morimoto.gx@renesas.com>
On Fri, Jan 30, 2015 at 05:18:56AM +0000, Kuninori Morimoto wrote:
>
> Hi Lars, Simon
>
> > The DAI link format should be specified for the whole link rather than just
> > one component on the link. So move the format specification for the HDMI
> > audio link from the CPU component to the link itself.
> >
> > Since the sh-mobile-hdmi DAI driver doesn't implement the set_fmt() callback
> > in this case there is no functional difference between only specifying the
> > the format for the CPU side or for the whole link, but the later it will
> > allow us to remove support for just specifying the format for one component.
> >
> > Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> > ---
>
> I tested these 3 patches on armadillo800eva
>
> [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format
> [PATCH v2 2/3] ASoC: sh: fsi: Fix clock inversion
> [PATCH v2 3/3] ASoC: simple-card: Remove support for setting differing DAI formats
>
> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> 2/3 patch changed behavior for clock inversion on FSI driver.
> FSI + wm8978 on armadillo800eva worked without any issues,
> but, I don't know how much effect it has for other board.
> We used this inversion flags on each board for historical reasons (copy-paste),
> but, almost all these were not needed (except some picky board) on FSI.
> Maybe Lars's 2/3 patch is correct, but, it is difficult to check/confirm for all boards.
> And unfortunately, Renesas don't use FSI anymore.
> So, I think keeping current FSI driver as-is is more safety for old boards.
> armadillo800eva works well with below patch (as 2/3 patch)
Thanks, I am inclined to agree that it is best to leave things unchanged.
>
> --------------
> diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
> index 75de26c..36aaeb1 100644
> --- a/arch/arm/mach-shmobile/board-armadillo800eva.c
> +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
> @@ -1015,7 +1015,6 @@ static struct asoc_simple_card_info fsi_wm8978_info = {
> .platform = "sh_fsi2",
> .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
> .cpu_dai = {
> - .fmt = SND_SOC_DAIFMT_IB_NF,
> .name = "fsia-dai",
> },
> .codec_dai = {
> --------------
>
next prev parent reply other threads:[~2015-02-11 0:28 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-21 13:38 [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format Lars-Peter Clausen
2015-01-21 13:38 ` Lars-Peter Clausen
2015-01-21 13:38 ` Lars-Peter Clausen
2015-01-21 13:38 ` [PATCH v2 2/3] ASoC: sh: fsi: Fix clock inversion Lars-Peter Clausen
2015-01-21 13:38 ` Lars-Peter Clausen
2015-01-21 13:38 ` Lars-Peter Clausen
2016-01-29 15:52 ` Geert Uytterhoeven
2016-01-29 15:52 ` Geert Uytterhoeven
2015-01-21 13:38 ` [PATCH v2 3/3] ASoC: simple-card: Remove support for setting differing DAI formats Lars-Peter Clausen
2015-01-21 13:38 ` Lars-Peter Clausen
2015-01-21 13:38 ` Lars-Peter Clausen
2015-01-27 0:58 ` [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format Simon Horman
2015-01-27 0:58 ` Simon Horman
2015-01-27 0:58 ` Simon Horman
2015-01-27 7:40 ` Kuninori Morimoto
2015-01-27 7:40 ` Kuninori Morimoto
2015-01-27 7:40 ` Kuninori Morimoto
2015-01-27 8:19 ` Lars-Peter Clausen
2015-01-27 8:19 ` Lars-Peter Clausen
2015-01-27 8:19 ` Lars-Peter Clausen
2015-01-27 23:52 ` Kuninori Morimoto
2015-01-27 23:52 ` Kuninori Morimoto
2015-01-27 23:52 ` Kuninori Morimoto
2015-01-30 1:25 ` Simon Horman
2015-01-30 1:25 ` Simon Horman
2015-01-30 1:25 ` Simon Horman
2015-01-30 5:18 ` Kuninori Morimoto
2015-01-30 5:18 ` Kuninori Morimoto
2015-02-11 0:28 ` Simon Horman [this message]
2015-02-11 0:28 ` Simon Horman
2015-02-11 0:28 ` Simon Horman
2015-02-27 0:23 ` Kuninori Morimoto
2015-02-27 0:23 ` Kuninori Morimoto
2015-03-22 18:52 ` Mark Brown
2015-03-22 18:52 ` Mark Brown
2015-03-23 7:00 ` Kuninori Morimoto
2015-03-23 7:00 ` Kuninori Morimoto
2015-03-23 21:12 ` Mark Brown
2015-03-23 21:12 ` Mark Brown
2015-03-23 21:12 ` Mark Brown
2015-03-24 0:07 ` Kuninori Morimoto
2015-03-24 0:07 ` Kuninori Morimoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150211002802.GC7826@verge.net.au \
--to=horms@verge.net.au \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.