From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-trivial@nongnu.org, Amit Shah <amit.shah@redhat.com>,
qemu-devel@nongnu.org, Juan Quintela <quintela@redhat.com>
Subject: Re: [Qemu-trivial] [Qemu-devel] [PATCH] migration/rdma: clean up qemu_rdma_dest_init a bit
Date: Thu, 19 Feb 2015 10:25:00 +0000 [thread overview]
Message-ID: <20150219102500.GA2305@work-vm> (raw)
In-Reply-To: <1424073025-13262-1-git-send-email-mjt@msgid.tls.msk.ru>
* Michael Tokarev (mjt@tls.msk.ru) wrote:
> Do not check for rdma->host being empty twice. This removes a large
> "if" block, so code indentation is changed. While at it, remove an
> ugly goto from the loop, replacing it with a cleaner if logic. And
> finally, there's no need to initialize `ret' variable since is always
> has a value.
This looks OK; have you got RDMA hardware to test with, if not I can
give it a go.
Dave
>
> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
> ---
> migration/rdma.c | 51 ++++++++++++++++++++++-----------------------------
> 1 file changed, 22 insertions(+), 29 deletions(-)
>
> diff --git a/migration/rdma.c b/migration/rdma.c
> index 6bee30c..76af724 100644
> --- a/migration/rdma.c
> +++ b/migration/rdma.c
> @@ -2366,10 +2366,10 @@ err_rdma_source_connect:
>
> static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp)
> {
> - int ret = -EINVAL, idx;
> + int ret, idx;
> struct rdma_cm_id *listen_id;
> char ip[40] = "unknown";
> - struct rdma_addrinfo *res;
> + struct rdma_addrinfo *res, *e;
> char port_str[16];
>
> for (idx = 0; idx < RDMA_WRID_MAX; idx++) {
> @@ -2377,7 +2377,7 @@ static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp)
> rdma->wr_data[idx].control_curr = NULL;
> }
>
> - if (rdma->host == NULL) {
> + if (!rdma->host || !rdma->host[0]) {
> ERROR(errp, "RDMA host is not set!");
> rdma->error_state = -EINVAL;
> return -1;
> @@ -2400,40 +2400,33 @@ static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp)
> snprintf(port_str, 16, "%d", rdma->port);
> port_str[15] = '\0';
>
> - if (rdma->host && strcmp("", rdma->host)) {
> - struct rdma_addrinfo *e;
> + ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res);
> + if (ret < 0) {
> + ERROR(errp, "could not rdma_getaddrinfo address %s", rdma->host);
> + goto err_dest_init_bind_addr;
> + }
>
> - ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res);
> - if (ret < 0) {
> - ERROR(errp, "could not rdma_getaddrinfo address %s", rdma->host);
> - goto err_dest_init_bind_addr;
> + for (e = res; e != NULL; e = e->ai_next) {
> + inet_ntop(e->ai_family,
> + &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip);
> + trace_qemu_rdma_dest_init_trying(rdma->host, ip);
> + ret = rdma_bind_addr(listen_id, e->ai_dst_addr);
> + if (ret) {
> + continue;
> }
> -
> - for (e = res; e != NULL; e = e->ai_next) {
> - inet_ntop(e->ai_family,
> - &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip);
> - trace_qemu_rdma_dest_init_trying(rdma->host, ip);
> - ret = rdma_bind_addr(listen_id, e->ai_dst_addr);
> - if (!ret) {
> - if (e->ai_family == AF_INET6) {
> - ret = qemu_rdma_broken_ipv6_kernel(errp, listen_id->verbs);
> - if (ret) {
> - continue;
> - }
> - }
> -
> - goto listen;
> + if (e->ai_family == AF_INET6) {
> + ret = qemu_rdma_broken_ipv6_kernel(errp, listen_id->verbs);
> + if (ret) {
> + continue;
> }
> }
> + break;
> + }
>
> + if (!e) {
> ERROR(errp, "Error: could not rdma_bind_addr!");
> goto err_dest_init_bind_addr;
> - } else {
> - ERROR(errp, "migration host and port not specified!");
> - ret = -EINVAL;
> - goto err_dest_init_bind_addr;
> }
> -listen:
>
> rdma->listen_id = listen_id;
> qemu_rdma_dump_gid("dest_init", listen_id);
> --
> 2.1.4
>
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
WARNING: multiple messages have this Message-ID (diff)
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-trivial@nongnu.org, Amit Shah <amit.shah@redhat.com>,
qemu-devel@nongnu.org, Juan Quintela <quintela@redhat.com>
Subject: Re: [Qemu-devel] [PATCH] migration/rdma: clean up qemu_rdma_dest_init a bit
Date: Thu, 19 Feb 2015 10:25:00 +0000 [thread overview]
Message-ID: <20150219102500.GA2305@work-vm> (raw)
In-Reply-To: <1424073025-13262-1-git-send-email-mjt@msgid.tls.msk.ru>
* Michael Tokarev (mjt@tls.msk.ru) wrote:
> Do not check for rdma->host being empty twice. This removes a large
> "if" block, so code indentation is changed. While at it, remove an
> ugly goto from the loop, replacing it with a cleaner if logic. And
> finally, there's no need to initialize `ret' variable since is always
> has a value.
This looks OK; have you got RDMA hardware to test with, if not I can
give it a go.
Dave
>
> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
> ---
> migration/rdma.c | 51 ++++++++++++++++++++++-----------------------------
> 1 file changed, 22 insertions(+), 29 deletions(-)
>
> diff --git a/migration/rdma.c b/migration/rdma.c
> index 6bee30c..76af724 100644
> --- a/migration/rdma.c
> +++ b/migration/rdma.c
> @@ -2366,10 +2366,10 @@ err_rdma_source_connect:
>
> static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp)
> {
> - int ret = -EINVAL, idx;
> + int ret, idx;
> struct rdma_cm_id *listen_id;
> char ip[40] = "unknown";
> - struct rdma_addrinfo *res;
> + struct rdma_addrinfo *res, *e;
> char port_str[16];
>
> for (idx = 0; idx < RDMA_WRID_MAX; idx++) {
> @@ -2377,7 +2377,7 @@ static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp)
> rdma->wr_data[idx].control_curr = NULL;
> }
>
> - if (rdma->host == NULL) {
> + if (!rdma->host || !rdma->host[0]) {
> ERROR(errp, "RDMA host is not set!");
> rdma->error_state = -EINVAL;
> return -1;
> @@ -2400,40 +2400,33 @@ static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp)
> snprintf(port_str, 16, "%d", rdma->port);
> port_str[15] = '\0';
>
> - if (rdma->host && strcmp("", rdma->host)) {
> - struct rdma_addrinfo *e;
> + ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res);
> + if (ret < 0) {
> + ERROR(errp, "could not rdma_getaddrinfo address %s", rdma->host);
> + goto err_dest_init_bind_addr;
> + }
>
> - ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res);
> - if (ret < 0) {
> - ERROR(errp, "could not rdma_getaddrinfo address %s", rdma->host);
> - goto err_dest_init_bind_addr;
> + for (e = res; e != NULL; e = e->ai_next) {
> + inet_ntop(e->ai_family,
> + &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip);
> + trace_qemu_rdma_dest_init_trying(rdma->host, ip);
> + ret = rdma_bind_addr(listen_id, e->ai_dst_addr);
> + if (ret) {
> + continue;
> }
> -
> - for (e = res; e != NULL; e = e->ai_next) {
> - inet_ntop(e->ai_family,
> - &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip);
> - trace_qemu_rdma_dest_init_trying(rdma->host, ip);
> - ret = rdma_bind_addr(listen_id, e->ai_dst_addr);
> - if (!ret) {
> - if (e->ai_family == AF_INET6) {
> - ret = qemu_rdma_broken_ipv6_kernel(errp, listen_id->verbs);
> - if (ret) {
> - continue;
> - }
> - }
> -
> - goto listen;
> + if (e->ai_family == AF_INET6) {
> + ret = qemu_rdma_broken_ipv6_kernel(errp, listen_id->verbs);
> + if (ret) {
> + continue;
> }
> }
> + break;
> + }
>
> + if (!e) {
> ERROR(errp, "Error: could not rdma_bind_addr!");
> goto err_dest_init_bind_addr;
> - } else {
> - ERROR(errp, "migration host and port not specified!");
> - ret = -EINVAL;
> - goto err_dest_init_bind_addr;
> }
> -listen:
>
> rdma->listen_id = listen_id;
> qemu_rdma_dump_gid("dest_init", listen_id);
> --
> 2.1.4
>
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
next prev parent reply other threads:[~2015-02-19 10:25 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-16 7:50 [Qemu-trivial] [PATCH] migration/rdma: clean up qemu_rdma_dest_init a bit Michael Tokarev
2015-02-16 7:50 ` [Qemu-devel] " Michael Tokarev
2015-02-19 10:25 ` Dr. David Alan Gilbert [this message]
2015-02-19 10:25 ` Dr. David Alan Gilbert
2015-02-28 9:26 ` [Qemu-trivial] " Michael Tokarev
2015-02-28 9:26 ` [Qemu-devel] " Michael Tokarev
2015-03-04 12:16 ` [Qemu-trivial] " Dr. David Alan Gilbert
2015-03-04 12:16 ` Dr. David Alan Gilbert
2015-03-04 12:22 ` [Qemu-trivial] " Michael Tokarev
2015-03-04 12:22 ` Michael Tokarev
2015-03-04 13:32 ` [Qemu-trivial] " Dr. David Alan Gilbert
2015-03-04 13:32 ` Dr. David Alan Gilbert
2015-03-04 13:34 ` [Qemu-trivial] " Michael Tokarev
2015-03-04 13:34 ` [Qemu-devel] " Michael Tokarev
2015-03-17 13:10 ` [Qemu-trivial] " Juan Quintela
2015-03-17 13:10 ` [Qemu-devel] " Juan Quintela
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150219102500.GA2305@work-vm \
--to=dgilbert@redhat.com \
--cc=amit.shah@redhat.com \
--cc=mjt@tls.msk.ru \
--cc=qemu-devel@nongnu.org \
--cc=qemu-trivial@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.