All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wei Yang <weiyang@linux.vnet.ibm.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@au1.ibm.com>,
	Wei Yang <weiyang@linux.vnet.ibm.com>,
	gwshan@linux.vnet.ibm.com, linux-pci@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH V11 07/17] powerpc/pci: Don't unset pci resources for VFs
Date: Mon, 2 Mar 2015 14:09:23 +0800	[thread overview]
Message-ID: <20150302060923.GB21571@richard> (raw)
In-Reply-To: <20150220234709.GD21131@google.com>

On Fri, Feb 20, 2015 at 05:47:09PM -0600, Bjorn Helgaas wrote:
>On Tue, Feb 10, 2015 at 07:14:45PM +1100, Benjamin Herrenschmidt wrote:
>> On Tue, 2015-02-10 at 14:25 +0800, Wei Yang wrote:
>> > PF's resource will be assigned first, including normal BARs and IOV
>> > BARs.
>> > 
>> > Then PF's driver will create VFs, in virtfn_add(). In this function,
>> > VF's
>> > resources is calculated from its PF's IOV BAR.
>> > 
>> > If you reset VF's resource as PFs, no one will try to assign it again.
>> 
>> So the problem is that the flag indicating VF is lost ? IE. We should
>> still mark them unset, but preserve that flag ?
>
>I think the problem is that the normal path for PCI_REASSIGN_ALL_RSRC is
>at boot-time, where we do this:
>
>    pcibios_init
>      pcibios_scan_phb
>        pci_scan_child_bus
>          ...
>            pci_device_add
>              pci_fixup_device(pci_fixup_header)
>		pcibios_fixup_resources                       # header fixup
>		  for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
>		    dev->resource[i].start = 0
>      pcibios_resource_survey
>        pcibios_allocate_resources
>
>and we assign dev->resource[] for everything in
>pcibios_allocate_resources().
>
>But VFs are enumerated later, when they are enabled by the PF driver after
>boot, so we have this path:
>
>    pci_enable_sriov
>      sriov_enable
>        virtfn_add(vf_id)
>          for (i = 0; i < 6; i++)
>            vf->resource[i].start = pf->resource[IOV + i].start + (size * vf_id)
>          pci_device_add
>            pci_fixup_device(pci_fixup_header)
>              pcibios_fixup_resources                   # header fixup
>                for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
>                  vf->resource[i].start = 0
>
>Here, we clear out vf->resource[0..5] in the header fixup, but we're not
>going to call pcibios_allocate_resources() again to reassign them.
>
>So I think the *intent* of PCI_REASSIGN_ALL_RSRC is preserved if
>pcibios_fixup_resources() leaves the VF resources alone, because the VF
>resources are completely determined by the PF resources, and the PF
>resources have already been reassigned.
>
>If my understanding is correct, I think the patch is reasonable, and I
>would try to put some of this explanation into the changelog.

Yep, it is correct, thanks for your explanation.

I did a chat on IRC with Ben, I guess he has got the idea :-)

>
>Bjorn

-- 
Richard Yang
Help you, Help me


WARNING: multiple messages have this Message-ID (diff)
From: Wei Yang <weiyang@linux.vnet.ibm.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org, Wei Yang <weiyang@linux.vnet.ibm.com>,
	Benjamin Herrenschmidt <benh@au1.ibm.com>,
	linuxppc-dev@lists.ozlabs.org, gwshan@linux.vnet.ibm.com
Subject: Re: [PATCH V11 07/17] powerpc/pci: Don't unset pci resources for VFs
Date: Mon, 2 Mar 2015 14:09:23 +0800	[thread overview]
Message-ID: <20150302060923.GB21571@richard> (raw)
In-Reply-To: <20150220234709.GD21131@google.com>

On Fri, Feb 20, 2015 at 05:47:09PM -0600, Bjorn Helgaas wrote:
>On Tue, Feb 10, 2015 at 07:14:45PM +1100, Benjamin Herrenschmidt wrote:
>> On Tue, 2015-02-10 at 14:25 +0800, Wei Yang wrote:
>> > PF's resource will be assigned first, including normal BARs and IOV
>> > BARs.
>> > 
>> > Then PF's driver will create VFs, in virtfn_add(). In this function,
>> > VF's
>> > resources is calculated from its PF's IOV BAR.
>> > 
>> > If you reset VF's resource as PFs, no one will try to assign it again.
>> 
>> So the problem is that the flag indicating VF is lost ? IE. We should
>> still mark them unset, but preserve that flag ?
>
>I think the problem is that the normal path for PCI_REASSIGN_ALL_RSRC is
>at boot-time, where we do this:
>
>    pcibios_init
>      pcibios_scan_phb
>        pci_scan_child_bus
>          ...
>            pci_device_add
>              pci_fixup_device(pci_fixup_header)
>		pcibios_fixup_resources                       # header fixup
>		  for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
>		    dev->resource[i].start = 0
>      pcibios_resource_survey
>        pcibios_allocate_resources
>
>and we assign dev->resource[] for everything in
>pcibios_allocate_resources().
>
>But VFs are enumerated later, when they are enabled by the PF driver after
>boot, so we have this path:
>
>    pci_enable_sriov
>      sriov_enable
>        virtfn_add(vf_id)
>          for (i = 0; i < 6; i++)
>            vf->resource[i].start = pf->resource[IOV + i].start + (size * vf_id)
>          pci_device_add
>            pci_fixup_device(pci_fixup_header)
>              pcibios_fixup_resources                   # header fixup
>                for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
>                  vf->resource[i].start = 0
>
>Here, we clear out vf->resource[0..5] in the header fixup, but we're not
>going to call pcibios_allocate_resources() again to reassign them.
>
>So I think the *intent* of PCI_REASSIGN_ALL_RSRC is preserved if
>pcibios_fixup_resources() leaves the VF resources alone, because the VF
>resources are completely determined by the PF resources, and the PF
>resources have already been reassigned.
>
>If my understanding is correct, I think the patch is reasonable, and I
>would try to put some of this explanation into the changelog.

Yep, it is correct, thanks for your explanation.

I did a chat on IRC with Ben, I guess he has got the idea :-)

>
>Bjorn

-- 
Richard Yang
Help you, Help me

  reply	other threads:[~2015-03-02  6:10 UTC|newest]

Thread overview: 168+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-22  5:54 [PATCH V10 00/17] Enable SRIOV on Power8 Wei Yang
2014-12-22  5:54 ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 01/17] PCI/IOV: Export interface for retrieve VF's BDF Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 02/17] PCI/IOV: add VF enable/disable hook Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 03/17] PCI: Add weak pcibios_iov_resource_alignment() interface Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 04/17] PCI: Store VF BAR size in pci_sriov Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 05/17] PCI: Take additional PF's IOV BAR alignment in sizing and assigning Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 06/17] powerpc/pci: Add PCI resource alignment documentation Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 07/17] powerpc/pci: Don't unset pci resources for VFs Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 08/17] powrepc/pci: Refactor pci_dn Wei Yang
2014-12-22  5:54 ` [PATCH V10 09/17] powerpc/pci: remove pci_dn->pcidev field Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 10/17] powerpc/powernv: Use pci_dn in PCI config accessor Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 11/17] powerpc/powernv: Allocate pe->iommu_table dynamically Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 12/17] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 13/17] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 14/17] powerpc/powernv: Shift VF resource with an offset Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 15/17] powerpc/powernv: Allocate VF PE Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 16/17] powerpc/powernv: Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  5:54 ` [PATCH V10 17/17] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2014-12-22  5:54   ` Wei Yang
2014-12-22  6:05 ` [PATCH V10 00/17] Enable SRIOV on Power8 Wei Yang
2014-12-22  6:05   ` Wei Yang
2015-01-13 18:05   ` Bjorn Helgaas
2015-01-13 18:05     ` Bjorn Helgaas
2015-01-15  2:27     ` [PATCH V11 " Wei Yang
2015-01-15  2:27       ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 01/17] PCI/IOV: Export interface for retrieve VF's BDF Wei Yang
2015-01-15  2:27         ` Wei Yang
2015-02-20 23:09         ` Bjorn Helgaas
2015-02-20 23:09           ` Bjorn Helgaas
2015-03-02  6:05           ` Wei Yang
2015-03-02  6:05             ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 02/17] PCI/IOV: add VF enable/disable hook Wei Yang
2015-01-15  2:27         ` Wei Yang
2015-02-10  0:26         ` Benjamin Herrenschmidt
2015-02-10  0:26           ` Benjamin Herrenschmidt
2015-02-10  1:35           ` Wei Yang
2015-02-10  1:35             ` Wei Yang
2015-02-10  2:13             ` Benjamin Herrenschmidt
2015-02-10  2:13               ` Benjamin Herrenschmidt
2015-02-10  6:18               ` Wei Yang
2015-02-10  6:18                 ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 03/17] PCI: Add weak pcibios_iov_resource_alignment() interface Wei Yang
2015-01-15  2:27         ` Wei Yang
2015-02-10  0:32         ` Benjamin Herrenschmidt
2015-02-10  0:32           ` Benjamin Herrenschmidt
2015-02-10  1:44           ` Wei Yang
2015-02-10  1:44             ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 04/17] PCI: Store VF BAR size in pci_sriov Wei Yang
2015-01-15  2:27         ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 05/17] PCI: Take additional PF's IOV BAR alignment in sizing and assigning Wei Yang
2015-01-15  2:27         ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 06/17] powerpc/pci: Add PCI resource alignment documentation Wei Yang
2015-01-15  2:27         ` Wei Yang
2015-02-04 23:44         ` Bjorn Helgaas
2015-02-04 23:44           ` Bjorn Helgaas
2015-02-10  1:02           ` Benjamin Herrenschmidt
2015-02-10  1:02             ` Benjamin Herrenschmidt
2015-02-20  0:56             ` Bjorn Helgaas
2015-02-20  0:56               ` Bjorn Helgaas
2015-02-20  2:41               ` Benjamin Herrenschmidt
2015-02-20  2:41                 ` Benjamin Herrenschmidt
2015-01-15  2:27       ` [PATCH V11 07/17] powerpc/pci: Don't unset pci resources for VFs Wei Yang
2015-01-15  2:27         ` Wei Yang
2015-02-10  0:36         ` Benjamin Herrenschmidt
2015-02-10  0:36           ` Benjamin Herrenschmidt
2015-02-10  1:51           ` Wei Yang
2015-02-10  1:51             ` Wei Yang
2015-02-10  2:14             ` Benjamin Herrenschmidt
2015-02-10  2:14               ` Benjamin Herrenschmidt
2015-02-10  6:25               ` Wei Yang
2015-02-10  6:25                 ` Wei Yang
2015-02-10  8:14                 ` Benjamin Herrenschmidt
2015-02-10  8:14                   ` Benjamin Herrenschmidt
2015-02-20 23:47                   ` Bjorn Helgaas
2015-02-20 23:47                     ` Bjorn Helgaas
2015-03-02  6:09                     ` Wei Yang [this message]
2015-03-02  6:09                       ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 08/17] powrepc/pci: Refactor pci_dn Wei Yang
2015-02-20 23:19         ` Bjorn Helgaas
2015-02-20 23:19           ` Bjorn Helgaas
2015-02-23  0:13           ` Gavin Shan
2015-02-23  0:13             ` Gavin Shan
2015-02-24  8:13             ` Bjorn Helgaas
2015-02-24  8:13               ` Bjorn Helgaas
2015-02-24  8:25               ` Benjamin Herrenschmidt
2015-02-24  8:25                 ` Benjamin Herrenschmidt
2015-01-15  2:27       ` [PATCH V11 09/17] powerpc/pci: remove pci_dn->pcidev field Wei Yang
2015-01-15  2:27         ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 10/17] powerpc/powernv: Use pci_dn in PCI config accessor Wei Yang
2015-01-15  2:28         ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 11/17] powerpc/powernv: Allocate pe->iommu_table dynamically Wei Yang
2015-01-15  2:28         ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 12/17] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe Wei Yang
2015-01-15  2:28         ` Wei Yang
2015-02-04 21:26         ` Bjorn Helgaas
2015-02-04 21:26           ` Bjorn Helgaas
2015-02-04 23:08           ` Wei Yang
2015-02-04 23:08             ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 13/17] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2015-01-15  2:28         ` Wei Yang
2015-02-04 21:26         ` Bjorn Helgaas
2015-02-04 21:26           ` Bjorn Helgaas
2015-02-04 22:45           ` Wei Yang
2015-02-04 22:45             ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 14/17] powerpc/powernv: Shift VF resource with an offset Wei Yang
2015-01-15  2:28         ` Wei Yang
2015-01-30 23:08         ` Bjorn Helgaas
2015-01-30 23:08           ` Bjorn Helgaas
2015-02-03  1:30           ` Wei Yang
2015-02-03  1:30             ` Wei Yang
2015-02-03  7:01           ` [PATCH] powerpc/powernv: make sure the IOV BAR will not exceed limit after shifting Wei Yang
2015-02-03  7:01             ` Wei Yang
2015-02-04  0:19             ` Bjorn Helgaas
2015-02-04  0:19               ` Bjorn Helgaas
2015-02-04  3:34               ` Wei Yang
2015-02-04  3:34                 ` Wei Yang
2015-02-04 14:19                 ` Bjorn Helgaas
2015-02-04 14:19                   ` Bjorn Helgaas
2015-02-04 15:20                   ` Wei Yang
2015-02-04 15:20                     ` Wei Yang
2015-02-04 16:08                   ` [PATCH] pci/iov: fix memory leak introduced in "PCI: Store individual VF BAR size in struct pci_sriov" Wei Yang
2015-02-04 16:08                     ` Wei Yang
2015-02-04 16:28                     ` Bjorn Helgaas
2015-02-04 16:28                       ` Bjorn Helgaas
2015-02-04 20:53                 ` [PATCH] powerpc/powernv: make sure the IOV BAR will not exceed limit after shifting Bjorn Helgaas
2015-02-04 20:53                   ` Bjorn Helgaas
2015-02-05  3:01                   ` Wei Yang
2015-02-05  3:01                     ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 15/17] powerpc/powernv: Allocate VF PE Wei Yang
2015-01-15  2:28         ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 16/17] powerpc/powernv: Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2015-01-15  2:28         ` Wei Yang
2015-02-04 22:05         ` Bjorn Helgaas
2015-02-04 22:05           ` Bjorn Helgaas
2015-02-05  0:07           ` Wei Yang
2015-02-05  0:07             ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 17/17] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2015-01-15  2:28         ` Wei Yang
2015-02-04 23:44       ` [PATCH V11 00/17] Enable SRIOV on Power8 Bjorn Helgaas
2015-02-04 23:44         ` Bjorn Helgaas
2015-02-05  0:13         ` Wei Yang
2015-02-05  0:13           ` Wei Yang
2015-02-05  6:34         ` [PATCH 0/3] Code adjustment on pci/virtualization Wei Yang
2015-02-05  6:34           ` Wei Yang
2015-02-05  6:34           ` [PATCH 1/3] fix on Store individual VF BAR size in struct pci_sriov Wei Yang
2015-02-05  6:34             ` Wei Yang
2015-02-05  6:34           ` [PATCH 2/3] fix Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2015-02-05  6:34             ` Wei Yang
2015-02-05  6:34           ` [PATCH 3/3] remove the unused end in pnv_pci_vf_resource_shift() Wei Yang
2015-02-05  6:34             ` Wei Yang
2015-02-10  0:25         ` [PATCH V11 00/17] Enable SRIOV on Power8 Benjamin Herrenschmidt
2015-02-10  0:25           ` Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150302060923.GB21571@richard \
    --to=weiyang@linux.vnet.ibm.com \
    --cc=benh@au1.ibm.com \
    --cc=bhelgaas@google.com \
    --cc=gwshan@linux.vnet.ibm.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.