All of lore.kernel.org
 help / color / mirror / Atom feed
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/4] clk: st: New always-on clock domain
Date: Mon, 2 Mar 2015 11:37:18 +0000	[thread overview]
Message-ID: <20150302113718.GG32347@x1> (raw)
In-Reply-To: <87vbij1vuk.fsf@free.fr>

On Mon, 02 Mar 2015, Robert Jarzmik wrote:

> Lee Jones <lee.jones@linaro.org> writes:
> 
> > On Sat, 28 Feb 2015, Robert Jarzmik wrote:
> >
> >> Lee Jones <lee.jones@linaro.org> writes:
> >>     it doesn't specify which usecase is not covered by CLK_IGNORE_UNUSED, it
> >>     says, up to my understanding, that is it another way to have to
> >>     CLK_IGNORE_UNUSED flag applied.
> >
> > Well that is exactly what we're doing.  Is there an issue with that?
> >
> > This is a way to do it at a platform level.  It means we can support
> > multiple platforms where clocksources have been switched around
> > without writing new driver code in drivers/clk/st.
> >
> > If you have something else in mind, let me know.
> >
> >>  2) I still fail to see why this is necessary
> >>     IOW why declaring the mandatory always-on clocks with the proper flag should
> >>     be augmented with a new clock list. Isn't the existing flag the generic way
> >>     ?
> >
> > I'm not sure what you mean by this, would you be able to expland a
> > little?
> >
> >> I might not understand the real motivation behind that of course, that's why I'm
> >> asking.
> >
> > Please bear in mind that we don't supply our clocks statically.  All
> > of the information is extracted from DT, so if the always-on
> > information does reside in there, where do you propose it comes from?
> 
> I thought the standard clock binding provided a way to set this flag. Now I
> crosschecked the binding, it doesn't ...
> 
> My point was I didn't want the flag to be settable from 2 different places,
> where consistency was to be kept across different device-tree leafs.
> 
> > We could just write this code inside our own driver and apply the
> > CLK_IGNORE_UNUSED at a local level, but that's not the generic
> > solution I am searching for.
> 
> All right, I'm convinced now I undertand the flag was not settable from
> devicetree binding before this patchset.
> 
> You can add to patch 3/4 :
> Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>

Until told otherwise, I'm going to apply this onto the other
patchset.  This one has already been NACKed, due to DT push-back.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

WARNING: multiple messages have this Message-ID (diff)
From: Lee Jones <lee.jones@linaro.org>
To: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, mturquette@linaro.org,
	sboyd@codeaurora.org, kernel@stlinux.com,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v3 0/4] clk: st: New always-on clock domain
Date: Mon, 2 Mar 2015 11:37:18 +0000	[thread overview]
Message-ID: <20150302113718.GG32347@x1> (raw)
In-Reply-To: <87vbij1vuk.fsf@free.fr>

On Mon, 02 Mar 2015, Robert Jarzmik wrote:

> Lee Jones <lee.jones@linaro.org> writes:
> 
> > On Sat, 28 Feb 2015, Robert Jarzmik wrote:
> >
> >> Lee Jones <lee.jones@linaro.org> writes:
> >>     it doesn't specify which usecase is not covered by CLK_IGNORE_UNUSED, it
> >>     says, up to my understanding, that is it another way to have to
> >>     CLK_IGNORE_UNUSED flag applied.
> >
> > Well that is exactly what we're doing.  Is there an issue with that?
> >
> > This is a way to do it at a platform level.  It means we can support
> > multiple platforms where clocksources have been switched around
> > without writing new driver code in drivers/clk/st.
> >
> > If you have something else in mind, let me know.
> >
> >>  2) I still fail to see why this is necessary
> >>     IOW why declaring the mandatory always-on clocks with the proper flag should
> >>     be augmented with a new clock list. Isn't the existing flag the generic way
> >>     ?
> >
> > I'm not sure what you mean by this, would you be able to expland a
> > little?
> >
> >> I might not understand the real motivation behind that of course, that's why I'm
> >> asking.
> >
> > Please bear in mind that we don't supply our clocks statically.  All
> > of the information is extracted from DT, so if the always-on
> > information does reside in there, where do you propose it comes from?
> 
> I thought the standard clock binding provided a way to set this flag. Now I
> crosschecked the binding, it doesn't ...
> 
> My point was I didn't want the flag to be settable from 2 different places,
> where consistency was to be kept across different device-tree leafs.
> 
> > We could just write this code inside our own driver and apply the
> > CLK_IGNORE_UNUSED at a local level, but that's not the generic
> > solution I am searching for.
> 
> All right, I'm convinced now I undertand the flag was not settable from
> devicetree binding before this patchset.
> 
> You can add to patch 3/4 :
> Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>

Until told otherwise, I'm going to apply this onto the other
patchset.  This one has already been NACKed, due to DT push-back.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2015-03-02 11:37 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-24 17:33 [PATCH v3 0/4] clk: st: New always-on clock domain Lee Jones
2015-02-24 17:33 ` Lee Jones
2015-02-24 17:33 ` Lee Jones
2015-02-24 17:33 ` [PATCH v3 1/4] ARM: sti: stih407-family: Supply defines for CLOCKGEN A0 Lee Jones
2015-02-24 17:33   ` Lee Jones
2015-02-24 17:33   ` Lee Jones
2015-02-24 17:33 ` [PATCH v3 2/4] ARM: sti: stih407-family: Add platform interconnects to always-on clk domain Lee Jones
2015-02-24 17:33   ` Lee Jones
2015-02-24 17:33 ` [PATCH v3 3/4] clk: Provide an always-on clock domain framework Lee Jones
2015-02-24 17:33   ` Lee Jones
2015-02-24 17:33 ` [PATCH v3 4/4] clk: dt: Introduce always-on clock domain documentation Lee Jones
2015-02-24 17:33   ` Lee Jones
2015-02-24 17:42 ` [PATCH v3 0/4] clk: st: New always-on clock domain Lee Jones
2015-02-24 17:42   ` Lee Jones
2015-02-24 17:42   ` Lee Jones
2015-02-27 21:37 ` Robert Jarzmik
2015-02-27 21:37   ` Robert Jarzmik
2015-02-27 21:49   ` Lee Jones
2015-02-27 21:49     ` Lee Jones
2015-02-27 23:38     ` Robert Jarzmik
2015-02-27 23:38       ` Robert Jarzmik
2015-02-27 23:38       ` Robert Jarzmik
2015-03-02  8:30       ` Lee Jones
2015-03-02  8:30         ` Lee Jones
2015-03-02 11:29         ` Robert Jarzmik
2015-03-02 11:29           ` Robert Jarzmik
2015-03-02 11:37           ` Lee Jones [this message]
2015-03-02 11:37             ` Lee Jones
2015-03-04 12:00 ` Lee Jones
2015-03-04 12:00   ` Lee Jones
2015-03-04 12:00   ` Lee Jones
2015-03-06 19:08   ` Mike Turquette
2015-03-06 19:08     ` Mike Turquette
2015-03-09  9:28     ` Lee Jones
2015-03-09  9:28       ` Lee Jones
2015-03-25  4:11       ` Geert Uytterhoeven
2015-03-25  4:11         ` Geert Uytterhoeven
2015-03-25  4:11         ` Geert Uytterhoeven
2015-03-26 13:51         ` Lee Jones
2015-03-26 13:51           ` Lee Jones
2015-03-26 13:51           ` Lee Jones
2015-03-26 16:55           ` Geert Uytterhoeven
2015-03-26 16:55             ` Geert Uytterhoeven
2015-03-26 19:38             ` Lee Jones
2015-03-26 19:38               ` Lee Jones
2015-04-02  8:31               ` Geert Uytterhoeven
2015-04-02  8:31                 ` Geert Uytterhoeven
2015-04-02 10:48                 ` Lee Jones
2015-04-02 10:48                   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150302113718.GG32347@x1 \
    --to=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.