All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: "Sébastien Szymanski"
	<sebastien.szymanski-d2DlULPkwbNWk0Htik3J/w@public.gmane.org>
Cc: linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: Re: [PATCH 1/2] Input: add support for Semtech SX8654 I2C touchscreen controller
Date: Fri, 6 Mar 2015 16:57:17 -0800	[thread overview]
Message-ID: <20150307005717.GD26151@dtor-ws> (raw)
In-Reply-To: <20150306182155.GB4540@dtor-ws>

On Fri, Mar 06, 2015 at 10:21:55AM -0800, Dmitry Torokhov wrote:
> On Fri, Mar 06, 2015 at 07:21:38PM +0100, Sébastien Szymanski wrote:
> > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> > ---
> >  drivers/input/touchscreen/Kconfig  |  11 ++
> >  drivers/input/touchscreen/Makefile |   1 +
> >  drivers/input/touchscreen/sx8654.c | 285 +++++++++++++++++++++++++++++++++++++
> >  3 files changed, 297 insertions(+)
> >  create mode 100644 drivers/input/touchscreen/sx8654.c
> > 
> > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> > index 5891752..6f713fd0 100644
> > --- a/drivers/input/touchscreen/Kconfig
> > +++ b/drivers/input/touchscreen/Kconfig
> > @@ -961,6 +961,17 @@ config TOUCHSCREEN_SUR40
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called sur40.
> >  
> > +config TOUCHSCREEN_SX8654
> > +	tristate "Semtech SX8654 touchscreen"
> > +	depends on I2C && OF
> 
> Does it have to depend on OF? I do not see anything OF-specific there...
> 
> No need to resumbit.

Applied with some cosmetic edits and DT bindings folded into this patch.

Thank you.

> 
> > +	help
> > +	  Say Y here if you have a Semtech SX8654 touchscreen controller.
> > +
> > +	  If unsure, say N
> > +
> > +	  To compile this driver as a module, choose M here: the
> > +	  module will be called sx8654.
> > +
> >  config TOUCHSCREEN_TPS6507X
> >  	tristate "TPS6507x based touchscreens"
> >  	depends on I2C
> > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> > index 0242fea..a06a752 100644
> > --- a/drivers/input/touchscreen/Makefile
> > +++ b/drivers/input/touchscreen/Makefile
> > @@ -79,5 +79,6 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL)	+= atmel-wm97xx.o
> >  obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
> >  obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
> >  obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o
> > +obj-$(CONFIG_TOUCHSCREEN_SX8654)	+= sx8654.o
> >  obj-$(CONFIG_TOUCHSCREEN_TPS6507X)	+= tps6507x-ts.o
> >  obj-$(CONFIG_TOUCHSCREEN_ZFORCE)	+= zforce_ts.o
> > diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
> > new file mode 100644
> > index 0000000..58cc478
> > --- /dev/null
> > +++ b/drivers/input/touchscreen/sx8654.c
> > @@ -0,0 +1,285 @@
> > +/*
> > + * drivers/input/touchscreen/sx8654.c
> > + *
> > + * Copyright (c) 2015 Armadeus Systems
> > + *	Sébastien Szymanski <sebastien.szymanski-d2DlULPkwbNWk0Htik3J/w@public.gmane.org>
> > + *
> > + * Using code from:
> > + *  - sx865x.c
> > + *	Copyright (c) 2013 U-MoBo Srl
> > + *	Pierluigi Passaro <p.passaro-I81Cv5TA1VrQT0dZR+AlfA@public.gmane.org>
> > + *  - sx8650.c
> > + *      Copyright (c) 2009 Wayne Roberts
> > + *  - tsc2007.c
> > + *      Copyright (c) 2008 Kwangwoo Lee
> > + *  - ads7846.c
> > + *      Copyright (c) 2005 David Brownell
> > + *      Copyright (c) 2006 Nokia Corporation
> > + *  - corgi_ts.c
> > + *      Copyright (C) 2004-2005 Richard Purdie
> > + *  - omap_ts.[hc], ads7846.h, ts_osk.c
> > + *      Copyright (C) 2002 MontaVista Software
> > + *      Copyright (C) 2004 Texas Instruments
> > + *      Copyright (C) 2005 Dirk Behme
> > + *
> > + *  This program is free software; you can redistribute it and/or modify
> > + *  it under the terms of the GNU General Public License version 2 as
> > + *  published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/input.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/irq.h>
> > +
> > +/* register addresses */
> > +#define I2C_REG_TOUCH0			0x00
> > +#define I2C_REG_TOUCH1			0x01
> > +#define I2C_REG_CHANMASK		0x04
> > +#define I2C_REG_IRQMASK			0x22
> > +#define I2C_REG_IRQSRC			0x23
> > +#define I2C_REG_SOFTRESET		0x3f
> > +
> > +/* commands */
> > +#define CMD_READ_REGISTER		0x40
> > +#define CMD_MANUAL			0xc0
> > +#define CMD_PENTRG			0xe0
> > +
> > +/* value for I2C_REG_SOFTRESET */
> > +#define SOFTRESET_VALUE			0xde
> > +
> > +/* bits for I2C_REG_IRQSRC */
> > +#define IRQ_PENTOUCH_TOUCHCONVDONE	0x08
> > +#define IRQ_PENRELEASE			0x04
> > +
> > +/* bits for RegTouch1 */
> > +#define CONDIRQ				0x20
> > +#define FILT_7SA			0x03
> > +
> > +/* bits for I2C_REG_CHANMASK */
> > +#define CONV_X				0x80
> > +#define CONV_Y				0x40
> > +
> > +/* coordinates rate: higher nibble of CTRL0 register */
> > +#define RATE_MANUAL			0x00
> > +#define RATE_5000CPS			0xf0
> > +
> > +/* power delay: lower nibble of CTRL0 register */
> > +#define POWDLY_1_1MS			0x0b
> > +
> > +#define MAX_12BIT			((1 << 12) - 1)
> > +
> > +struct sx8654 {
> > +	struct input_dev *input;
> > +	struct i2c_client *client;
> > +};
> > +
> > +static irqreturn_t sx8654_irq(int irq, void *handle)
> > +{
> > +	struct sx8654 *sx8654 = handle;
> > +	u8 irqsrc;
> > +	u8 data[4];
> > +	unsigned int x, y;
> > +	int retval;
> > +
> > +	irqsrc = i2c_smbus_read_byte_data(sx8654->client,
> > +					  (CMD_READ_REGISTER | I2C_REG_IRQSRC));
> > +	dev_dbg(&sx8654->client->dev, "irqsrc = 0x%x", irqsrc);
> > +
> > +	if (irqsrc < 0)
> > +		goto out;
> > +
> > +	if (irqsrc & IRQ_PENRELEASE) {
> > +		dev_dbg(&sx8654->client->dev, "pen release interrupt");
> > +
> > +		input_report_key(sx8654->input, BTN_TOUCH, 0);
> > +		input_sync(sx8654->input);
> > +	}
> > +
> > +	if (irqsrc & IRQ_PENTOUCH_TOUCHCONVDONE) {
> > +		dev_dbg(&sx8654->client->dev, "pen touch interrupt");
> > +
> > +		retval = i2c_master_recv(sx8654->client, data, sizeof(data));
> > +		if (retval != sizeof(data))
> > +			goto out;
> > +
> > +		/* invalid data */
> > +		if (unlikely(data[0] & 0x80 || data[2] & 0x80))
> > +			goto out;
> > +
> > +		x = ((data[0] & 0xf) << 8) | (data[1]);
> > +		y = ((data[2] & 0xf) << 8) | (data[3]);
> > +
> > +		input_report_abs(sx8654->input, ABS_X, x);
> > +		input_report_abs(sx8654->input, ABS_Y, y);
> > +		input_report_key(sx8654->input, BTN_TOUCH, 1);
> > +		input_sync(sx8654->input);
> > +
> > +		dev_dbg(&sx8654->client->dev, "point(%4d,%4d)\n", x, y);
> > +	}
> > +
> > +out:
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static int sx8654_open(struct input_dev *dev)
> > +{
> > +	struct sx8654 *sx8654 = input_get_drvdata(dev);
> > +	struct i2c_client *client = sx8654->client;
> > +	int error;
> > +
> > +	/* enable pen trigger mode */
> > +	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0,
> > +					  (RATE_5000CPS | POWDLY_1_1MS));
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
> > +		return -EIO;
> > +	}
> > +
> > +	error = i2c_smbus_write_byte(client, CMD_PENTRG);
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing command CMD_PENTRG failed");
> > +		return -EIO;
> > +	}
> > +
> > +	enable_irq(client->irq);
> > +
> > +	return 0;
> > +}
> > +
> > +static void sx8654_close(struct input_dev *dev)
> > +{
> > +	struct sx8654 *sx8654 = input_get_drvdata(dev);
> > +	struct i2c_client *client = sx8654->client;
> > +	int error;
> > +
> > +	disable_irq(client->irq);
> > +
> > +	/* enable manual mode mode */
> > +	error = i2c_smbus_write_byte(client, CMD_MANUAL);
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing command CMD_MANUAL failed");
> > +		return;
> > +	}
> > +
> > +	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0);
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
> > +		return;
> > +	}
> > +}
> > +
> > +static int sx8654_probe(struct i2c_client *client,
> > +			const struct i2c_device_id *id)
> > +{
> > +	struct sx8654 *sx8654;
> > +	struct input_dev *input;
> > +	int error;
> > +
> > +	if (!i2c_check_functionality(client->adapter,
> > +				     I2C_FUNC_SMBUS_READ_WORD_DATA))
> > +		return -ENXIO;
> > +
> > +	sx8654 = devm_kzalloc(&client->dev, sizeof(*sx8654), GFP_KERNEL);
> > +	if (!sx8654)
> > +		return -ENOMEM;
> > +
> > +	input = devm_input_allocate_device(&client->dev);
> > +	if (!sx8654)
> > +		return -ENOMEM;
> > +
> > +	input->name = "SX8654 I2C Touchscreen";
> > +	input->id.bustype = BUS_I2C;
> > +	input->dev.parent = &client->dev;
> > +	input->open = sx8654_open;
> > +	input->close = sx8654_close;
> > +
> > +	__set_bit(INPUT_PROP_DIRECT, input->propbit);
> > +	input_set_capability(input, EV_KEY, BTN_TOUCH);
> > +	input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
> > +	input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
> > +
> > +	sx8654->client = client;
> > +	sx8654->input = input;
> > +
> > +	input_set_drvdata(sx8654->input, sx8654);
> > +
> > +	error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET,
> > +					  SOFTRESET_VALUE);
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing softreset value failed");
> > +		return -EIO;
> > +	}
> > +
> > +	error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK,
> > +					  (CONV_X | CONV_Y));
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed");
> > +		return -EIO;
> > +	}
> > +
> > +	error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
> > +					  (IRQ_PENTOUCH_TOUCHCONVDONE |
> > +					   IRQ_PENRELEASE));
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed");
> > +		return -EIO;
> > +	}
> > +
> > +	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1,
> > +					  (CONDIRQ | FILT_7SA));
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed");
> > +		return -EIO;
> > +	}
> > +
> > +	error = devm_request_threaded_irq(&client->dev, client->irq,
> > +					  NULL, sx8654_irq,
> > +					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > +					  client->name, sx8654);
> > +	if (error) {
> > +		dev_err(&client->dev,
> > +			"Failed to enable IRQ %d, error: %d\n",
> > +			client->irq, error);
> > +		return error;
> > +	}
> > +
> > +	/* Disable the IRQ, we'll enable it in sx8654_open() */
> > +	disable_irq(client->irq);
> > +
> > +	error = input_register_device(sx8654->input);
> > +	if (error)
> > +		return error;
> > +
> > +	i2c_set_clientdata(client, sx8654);
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id sx8654_of_match[] = {
> > +	{ .compatible = "semtech,sx8654", },
> > +	{ },
> > +};
> > +MODULE_DEVICE_TABLE(of, sx8654_of_match);
> > +
> > +static const struct i2c_device_id sx8654_id_table[] = {
> > +	{ "semtech_sx8654", 0 },
> > +	{ },
> > +};
> > +MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
> > +
> > +static struct i2c_driver sx8654_driver = {
> > +	.driver = {
> > +		.name = "sx8654",
> > +		.of_match_table = sx8654_of_match,
> > +	},
> > +
> > +	.id_table = sx8654_id_table,
> > +	.probe = sx8654_probe,
> > +};
> > +module_i2c_driver(sx8654_driver);
> > +
> > +MODULE_AUTHOR("Sébastien Szymanski <sebastien.szymanski@armadeus.com>");
> > +MODULE_DESCRIPTION("Semtech SX8654 I2C Touchscreen Driver");
> > +MODULE_LICENSE("GPL");
> > -- 
> > 2.0.5
> > 
> 
> -- 
> Dmitry

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	devicetree@vger.kernel.org, Kumar Gala <galak@codeaurora.org>
Subject: Re: [PATCH 1/2] Input: add support for Semtech SX8654 I2C touchscreen controller
Date: Fri, 6 Mar 2015 16:57:17 -0800	[thread overview]
Message-ID: <20150307005717.GD26151@dtor-ws> (raw)
In-Reply-To: <20150306182155.GB4540@dtor-ws>

On Fri, Mar 06, 2015 at 10:21:55AM -0800, Dmitry Torokhov wrote:
> On Fri, Mar 06, 2015 at 07:21:38PM +0100, Sébastien Szymanski wrote:
> > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> > ---
> >  drivers/input/touchscreen/Kconfig  |  11 ++
> >  drivers/input/touchscreen/Makefile |   1 +
> >  drivers/input/touchscreen/sx8654.c | 285 +++++++++++++++++++++++++++++++++++++
> >  3 files changed, 297 insertions(+)
> >  create mode 100644 drivers/input/touchscreen/sx8654.c
> > 
> > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> > index 5891752..6f713fd0 100644
> > --- a/drivers/input/touchscreen/Kconfig
> > +++ b/drivers/input/touchscreen/Kconfig
> > @@ -961,6 +961,17 @@ config TOUCHSCREEN_SUR40
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called sur40.
> >  
> > +config TOUCHSCREEN_SX8654
> > +	tristate "Semtech SX8654 touchscreen"
> > +	depends on I2C && OF
> 
> Does it have to depend on OF? I do not see anything OF-specific there...
> 
> No need to resumbit.

Applied with some cosmetic edits and DT bindings folded into this patch.

Thank you.

> 
> > +	help
> > +	  Say Y here if you have a Semtech SX8654 touchscreen controller.
> > +
> > +	  If unsure, say N
> > +
> > +	  To compile this driver as a module, choose M here: the
> > +	  module will be called sx8654.
> > +
> >  config TOUCHSCREEN_TPS6507X
> >  	tristate "TPS6507x based touchscreens"
> >  	depends on I2C
> > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> > index 0242fea..a06a752 100644
> > --- a/drivers/input/touchscreen/Makefile
> > +++ b/drivers/input/touchscreen/Makefile
> > @@ -79,5 +79,6 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL)	+= atmel-wm97xx.o
> >  obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
> >  obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
> >  obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o
> > +obj-$(CONFIG_TOUCHSCREEN_SX8654)	+= sx8654.o
> >  obj-$(CONFIG_TOUCHSCREEN_TPS6507X)	+= tps6507x-ts.o
> >  obj-$(CONFIG_TOUCHSCREEN_ZFORCE)	+= zforce_ts.o
> > diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
> > new file mode 100644
> > index 0000000..58cc478
> > --- /dev/null
> > +++ b/drivers/input/touchscreen/sx8654.c
> > @@ -0,0 +1,285 @@
> > +/*
> > + * drivers/input/touchscreen/sx8654.c
> > + *
> > + * Copyright (c) 2015 Armadeus Systems
> > + *	Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> > + *
> > + * Using code from:
> > + *  - sx865x.c
> > + *	Copyright (c) 2013 U-MoBo Srl
> > + *	Pierluigi Passaro <p.passaro@u-mobo.com>
> > + *  - sx8650.c
> > + *      Copyright (c) 2009 Wayne Roberts
> > + *  - tsc2007.c
> > + *      Copyright (c) 2008 Kwangwoo Lee
> > + *  - ads7846.c
> > + *      Copyright (c) 2005 David Brownell
> > + *      Copyright (c) 2006 Nokia Corporation
> > + *  - corgi_ts.c
> > + *      Copyright (C) 2004-2005 Richard Purdie
> > + *  - omap_ts.[hc], ads7846.h, ts_osk.c
> > + *      Copyright (C) 2002 MontaVista Software
> > + *      Copyright (C) 2004 Texas Instruments
> > + *      Copyright (C) 2005 Dirk Behme
> > + *
> > + *  This program is free software; you can redistribute it and/or modify
> > + *  it under the terms of the GNU General Public License version 2 as
> > + *  published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/input.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/irq.h>
> > +
> > +/* register addresses */
> > +#define I2C_REG_TOUCH0			0x00
> > +#define I2C_REG_TOUCH1			0x01
> > +#define I2C_REG_CHANMASK		0x04
> > +#define I2C_REG_IRQMASK			0x22
> > +#define I2C_REG_IRQSRC			0x23
> > +#define I2C_REG_SOFTRESET		0x3f
> > +
> > +/* commands */
> > +#define CMD_READ_REGISTER		0x40
> > +#define CMD_MANUAL			0xc0
> > +#define CMD_PENTRG			0xe0
> > +
> > +/* value for I2C_REG_SOFTRESET */
> > +#define SOFTRESET_VALUE			0xde
> > +
> > +/* bits for I2C_REG_IRQSRC */
> > +#define IRQ_PENTOUCH_TOUCHCONVDONE	0x08
> > +#define IRQ_PENRELEASE			0x04
> > +
> > +/* bits for RegTouch1 */
> > +#define CONDIRQ				0x20
> > +#define FILT_7SA			0x03
> > +
> > +/* bits for I2C_REG_CHANMASK */
> > +#define CONV_X				0x80
> > +#define CONV_Y				0x40
> > +
> > +/* coordinates rate: higher nibble of CTRL0 register */
> > +#define RATE_MANUAL			0x00
> > +#define RATE_5000CPS			0xf0
> > +
> > +/* power delay: lower nibble of CTRL0 register */
> > +#define POWDLY_1_1MS			0x0b
> > +
> > +#define MAX_12BIT			((1 << 12) - 1)
> > +
> > +struct sx8654 {
> > +	struct input_dev *input;
> > +	struct i2c_client *client;
> > +};
> > +
> > +static irqreturn_t sx8654_irq(int irq, void *handle)
> > +{
> > +	struct sx8654 *sx8654 = handle;
> > +	u8 irqsrc;
> > +	u8 data[4];
> > +	unsigned int x, y;
> > +	int retval;
> > +
> > +	irqsrc = i2c_smbus_read_byte_data(sx8654->client,
> > +					  (CMD_READ_REGISTER | I2C_REG_IRQSRC));
> > +	dev_dbg(&sx8654->client->dev, "irqsrc = 0x%x", irqsrc);
> > +
> > +	if (irqsrc < 0)
> > +		goto out;
> > +
> > +	if (irqsrc & IRQ_PENRELEASE) {
> > +		dev_dbg(&sx8654->client->dev, "pen release interrupt");
> > +
> > +		input_report_key(sx8654->input, BTN_TOUCH, 0);
> > +		input_sync(sx8654->input);
> > +	}
> > +
> > +	if (irqsrc & IRQ_PENTOUCH_TOUCHCONVDONE) {
> > +		dev_dbg(&sx8654->client->dev, "pen touch interrupt");
> > +
> > +		retval = i2c_master_recv(sx8654->client, data, sizeof(data));
> > +		if (retval != sizeof(data))
> > +			goto out;
> > +
> > +		/* invalid data */
> > +		if (unlikely(data[0] & 0x80 || data[2] & 0x80))
> > +			goto out;
> > +
> > +		x = ((data[0] & 0xf) << 8) | (data[1]);
> > +		y = ((data[2] & 0xf) << 8) | (data[3]);
> > +
> > +		input_report_abs(sx8654->input, ABS_X, x);
> > +		input_report_abs(sx8654->input, ABS_Y, y);
> > +		input_report_key(sx8654->input, BTN_TOUCH, 1);
> > +		input_sync(sx8654->input);
> > +
> > +		dev_dbg(&sx8654->client->dev, "point(%4d,%4d)\n", x, y);
> > +	}
> > +
> > +out:
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static int sx8654_open(struct input_dev *dev)
> > +{
> > +	struct sx8654 *sx8654 = input_get_drvdata(dev);
> > +	struct i2c_client *client = sx8654->client;
> > +	int error;
> > +
> > +	/* enable pen trigger mode */
> > +	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0,
> > +					  (RATE_5000CPS | POWDLY_1_1MS));
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
> > +		return -EIO;
> > +	}
> > +
> > +	error = i2c_smbus_write_byte(client, CMD_PENTRG);
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing command CMD_PENTRG failed");
> > +		return -EIO;
> > +	}
> > +
> > +	enable_irq(client->irq);
> > +
> > +	return 0;
> > +}
> > +
> > +static void sx8654_close(struct input_dev *dev)
> > +{
> > +	struct sx8654 *sx8654 = input_get_drvdata(dev);
> > +	struct i2c_client *client = sx8654->client;
> > +	int error;
> > +
> > +	disable_irq(client->irq);
> > +
> > +	/* enable manual mode mode */
> > +	error = i2c_smbus_write_byte(client, CMD_MANUAL);
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing command CMD_MANUAL failed");
> > +		return;
> > +	}
> > +
> > +	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0);
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
> > +		return;
> > +	}
> > +}
> > +
> > +static int sx8654_probe(struct i2c_client *client,
> > +			const struct i2c_device_id *id)
> > +{
> > +	struct sx8654 *sx8654;
> > +	struct input_dev *input;
> > +	int error;
> > +
> > +	if (!i2c_check_functionality(client->adapter,
> > +				     I2C_FUNC_SMBUS_READ_WORD_DATA))
> > +		return -ENXIO;
> > +
> > +	sx8654 = devm_kzalloc(&client->dev, sizeof(*sx8654), GFP_KERNEL);
> > +	if (!sx8654)
> > +		return -ENOMEM;
> > +
> > +	input = devm_input_allocate_device(&client->dev);
> > +	if (!sx8654)
> > +		return -ENOMEM;
> > +
> > +	input->name = "SX8654 I2C Touchscreen";
> > +	input->id.bustype = BUS_I2C;
> > +	input->dev.parent = &client->dev;
> > +	input->open = sx8654_open;
> > +	input->close = sx8654_close;
> > +
> > +	__set_bit(INPUT_PROP_DIRECT, input->propbit);
> > +	input_set_capability(input, EV_KEY, BTN_TOUCH);
> > +	input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
> > +	input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
> > +
> > +	sx8654->client = client;
> > +	sx8654->input = input;
> > +
> > +	input_set_drvdata(sx8654->input, sx8654);
> > +
> > +	error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET,
> > +					  SOFTRESET_VALUE);
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing softreset value failed");
> > +		return -EIO;
> > +	}
> > +
> > +	error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK,
> > +					  (CONV_X | CONV_Y));
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed");
> > +		return -EIO;
> > +	}
> > +
> > +	error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
> > +					  (IRQ_PENTOUCH_TOUCHCONVDONE |
> > +					   IRQ_PENRELEASE));
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed");
> > +		return -EIO;
> > +	}
> > +
> > +	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1,
> > +					  (CONDIRQ | FILT_7SA));
> > +	if (error < 0) {
> > +		dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed");
> > +		return -EIO;
> > +	}
> > +
> > +	error = devm_request_threaded_irq(&client->dev, client->irq,
> > +					  NULL, sx8654_irq,
> > +					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > +					  client->name, sx8654);
> > +	if (error) {
> > +		dev_err(&client->dev,
> > +			"Failed to enable IRQ %d, error: %d\n",
> > +			client->irq, error);
> > +		return error;
> > +	}
> > +
> > +	/* Disable the IRQ, we'll enable it in sx8654_open() */
> > +	disable_irq(client->irq);
> > +
> > +	error = input_register_device(sx8654->input);
> > +	if (error)
> > +		return error;
> > +
> > +	i2c_set_clientdata(client, sx8654);
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id sx8654_of_match[] = {
> > +	{ .compatible = "semtech,sx8654", },
> > +	{ },
> > +};
> > +MODULE_DEVICE_TABLE(of, sx8654_of_match);
> > +
> > +static const struct i2c_device_id sx8654_id_table[] = {
> > +	{ "semtech_sx8654", 0 },
> > +	{ },
> > +};
> > +MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
> > +
> > +static struct i2c_driver sx8654_driver = {
> > +	.driver = {
> > +		.name = "sx8654",
> > +		.of_match_table = sx8654_of_match,
> > +	},
> > +
> > +	.id_table = sx8654_id_table,
> > +	.probe = sx8654_probe,
> > +};
> > +module_i2c_driver(sx8654_driver);
> > +
> > +MODULE_AUTHOR("Sébastien Szymanski <sebastien.szymanski@armadeus.com>");
> > +MODULE_DESCRIPTION("Semtech SX8654 I2C Touchscreen Driver");
> > +MODULE_LICENSE("GPL");
> > -- 
> > 2.0.5
> > 
> 
> -- 
> Dmitry

-- 
Dmitry

  reply	other threads:[~2015-03-07  0:57 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-06 18:21 [PATCH 1/2] Input: add support for Semtech SX8654 I2C touchscreen controller Sébastien Szymanski
2015-03-06 18:21 ` Sébastien Szymanski
     [not found] ` <1425666099-8365-1-git-send-email-sebastien.szymanski-d2DlULPkwbNWk0Htik3J/w@public.gmane.org>
2015-03-06 18:21   ` [PATCH 2/2] Input: sx8654 - add device tree bindings Sébastien Szymanski
2015-03-06 18:21     ` Sébastien Szymanski
2015-03-06 18:21   ` [PATCH 1/2] Input: add support for Semtech SX8654 I2C touchscreen controller Dmitry Torokhov
2015-03-06 18:21     ` Dmitry Torokhov
2015-03-07  0:57     ` Dmitry Torokhov [this message]
2015-03-07  0:57       ` Dmitry Torokhov
2015-03-07 12:32       ` Paul Bolle
2015-03-07 21:25         ` Dmitry Torokhov
2015-03-07 21:54           ` Paul Bolle
2015-03-07 22:02             ` Dmitry Torokhov
2015-03-07 22:12               ` Paul Bolle
2015-03-07 22:26                 ` Dmitry Torokhov
2015-03-07 22:38                   ` Paul Bolle
2015-03-08  4:51                     ` Dmitry Torokhov
2015-03-11 10:56                       ` MODULE_LICENSE(): "GPL" vs. "GPL v2" (Was: [PATCH 1/2] Input: add support for Semtech SX8654 I2C touchscreen controller) Paul Bolle
2015-03-11 10:56                         ` Paul Bolle
2015-03-12  0:41                         ` Rusty Russell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150307005717.GD26151@dtor-ws \
    --to=dmitry.torokhov-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sebastien.szymanski-d2DlULPkwbNWk0Htik3J/w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.