Re: [PATCH] gpiolib: debugfs: display gpios requested as irq only

[Johan Hovold <johan@kernel.org>]

On Fri, May 15, 2015 at 04:25:21PM +0300, grygorii.strashko@linaro.org wrote:
> From: Grygorii Strashko <grygorii.strashko@linaro.org>
> 
> Now GPIOs, wich are requested as IRQ only, will not be displayed
> through GPIO debugfs. For example:
>  # cat /proc/interrupts
>             CPU0       CPU1
> ...
> 209:          0          0  4805d000.gpio  11 Edge      0-0021
> 
>  # cat /debug/gpio
> ...
> GPIOs 160-191, platform/4805d000.gpio, gpio:
> <--- no info about gpio used as IRQ only here
> 
> GPIOs 192-223, platform/48051000.gpio, gpio:
>  gpio-203 (vtt_fixed           ) out hi
> ...
> 
> Hence, improve GPIO debugfs code to show such kind of gpio and print
> IRQ number also. In addition, add marker "requested" for GPIOs wich
> were requested by using gpioX_request().
>
> After this patch sys/kernel/debug/gpio will produce following output:
> 
>  # cat /debug/gpio
> ...
> GPIOs 160-191, platform/4805d000.gpio, gpio:
>  gpio-171 ((null)              ) in  hi IRQ209
> 
> GPIOs 192-223, platform/48051000.gpio, gpio:
>  gpio-203 (vtt_fixed           ) out hi requested

This is backwards. All gpios *should* be requested. *If* we are to
include not-requested gpios in the debug output, then it is those pins
that need to be marked as not-requested.

The irq-number mapping could perhaps be useful, but it should go in a
separate patch. I'd suggest adding a '-' before the irq-number (e.g.
"IRQ-209").

Thanks,
Johan