[rtc-linux] Re: [V2] rtc: rtc-v3020: use gpio_request_array()

[Alexandre Belloni <alexandre.belloni@free-electrons.com>]

On 22/02/2013 at 11:19:15 +0900, Jingoo Han wrote :
> Using gpio_request_array()/gpio_free_array() can make the code
> simpler because it can set the direction and initial value
> in one shot and the for loop is unnecessary.
> 
> Also, struct v3020_gpio is removed, because the struct v3020_gpio
> is replaced with struct gpio.
> 
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
> Changes since v1:
> - Replace gpio_request_one() with gpio_request_array()
> 
>  drivers/rtc/rtc-v3020.c |   37 ++++++++++++-------------------------
>  1 files changed, 12 insertions(+), 25 deletions(-)
> 
Applied with the change suggested by Igor, thanks.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.