From: Peter Chen <peter.chen@freescale.com>
To: Rob Herring <robh@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Alan Stern <stern@rowland.harvard.edu>
Subject: Re: [PATCH v2 5/6] usb: chipidea: allow multiple instances to use default ci_default_pdata
Date: Thu, 21 May 2015 10:03:15 +0800 [thread overview]
Message-ID: <20150521020314.GB26837@shlinux2> (raw)
In-Reply-To: <1432087805-16671-6-git-send-email-robh@kernel.org>
On Tue, May 19, 2015 at 09:10:04PM -0500, Rob Herring wrote:
> Currently, ci_default_pdata is common to all instances of the driver and
> gets modified by the core driver code. This is bad if there are multiple
> instances of the device with different settings such as the phy type. Fix
> this by making a copy of the default platform_data.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Peter Chen <Peter.Chen@freescale.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> ---
> drivers/usb/chipidea/ci_hdrc_usb2.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
> index 45844c9..73d9906 100644
> --- a/drivers/usb/chipidea/ci_hdrc_usb2.c
> +++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
> @@ -25,11 +25,13 @@ struct ci_hdrc_usb2_priv {
> struct clk *clk;
> };
>
> -static struct ci_hdrc_platform_data ci_default_pdata = {
> +static const struct ci_hdrc_platform_data ci_default_pdata = {
> .capoffset = DEF_CAPOFFSET,
> .flags = CI_HDRC_DISABLE_STREAMING,
> };
>
> +static const struct of_device_id ci_hdrc_usb2_of_match[];
> +
unrelated change?
Others are ok.
> static int ci_hdrc_usb2_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -37,8 +39,10 @@ static int ci_hdrc_usb2_probe(struct platform_device *pdev)
> struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev);
> int ret;
>
> - if (!ci_pdata)
> - ci_pdata = &ci_default_pdata;
> + if (!ci_pdata) {
> + ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL);
> + *ci_pdata = ci_default_pdata; /* struct copy */
> + }
>
> priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> --
> 2.1.0
>
--
Best Regards,
Peter Chen
WARNING: multiple messages have this Message-ID (diff)
From: Peter Chen <peter.chen@freescale.com>
To: Rob Herring <robh@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Alan Stern <stern@rowland.harvard.edu>
Subject: Re: [PATCH v2 5/6] usb: chipidea: allow multiple instances to use default ci_default_pdata
Date: Thu, 21 May 2015 10:03:15 +0800 [thread overview]
Message-ID: <20150521020314.GB26837@shlinux2> (raw)
In-Reply-To: <1432087805-16671-6-git-send-email-robh@kernel.org>
On Tue, May 19, 2015 at 09:10:04PM -0500, Rob Herring wrote:
> Currently, ci_default_pdata is common to all instances of the driver and
> gets modified by the core driver code. This is bad if there are multiple
> instances of the device with different settings such as the phy type. Fix
> this by making a copy of the default platform_data.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Peter Chen <Peter.Chen@freescale.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> ---
> drivers/usb/chipidea/ci_hdrc_usb2.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
> index 45844c9..73d9906 100644
> --- a/drivers/usb/chipidea/ci_hdrc_usb2.c
> +++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
> @@ -25,11 +25,13 @@ struct ci_hdrc_usb2_priv {
> struct clk *clk;
> };
>
> -static struct ci_hdrc_platform_data ci_default_pdata = {
> +static const struct ci_hdrc_platform_data ci_default_pdata = {
> .capoffset = DEF_CAPOFFSET,
> .flags = CI_HDRC_DISABLE_STREAMING,
> };
>
> +static const struct of_device_id ci_hdrc_usb2_of_match[];
> +
unrelated change?
Others are ok.
> static int ci_hdrc_usb2_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -37,8 +39,10 @@ static int ci_hdrc_usb2_probe(struct platform_device *pdev)
> struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev);
> int ret;
>
> - if (!ci_pdata)
> - ci_pdata = &ci_default_pdata;
> + if (!ci_pdata) {
> + ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL);
> + *ci_pdata = ci_default_pdata; /* struct copy */
> + }
>
> priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> --
> 2.1.0
>
--
Best Regards,
Peter Chen
next prev parent reply other threads:[~2015-05-21 2:03 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-20 2:09 [PATCH v2 0/6] Marvell PXA1928 USB support Rob Herring
2015-05-20 2:09 ` Rob Herring
[not found] ` <1432087805-16671-1-git-send-email-robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2015-05-20 2:10 ` [PATCH v2 1/6] dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings Rob Herring
2015-05-20 2:10 ` Rob Herring
2015-05-20 2:10 ` [PATCH v2 5/6] usb: chipidea: allow multiple instances to use default ci_default_pdata Rob Herring
2015-05-20 2:10 ` Rob Herring
2015-05-21 2:03 ` Peter Chen [this message]
2015-05-21 2:03 ` Peter Chen
2015-05-20 2:10 ` [PATCH v2 6/6] usb: chipidea: add work-around for Marvell HSIC PHY startup Rob Herring
2015-05-20 2:10 ` Rob Herring
2015-05-21 3:13 ` Peter Chen
2015-05-21 3:13 ` Peter Chen
2015-05-21 3:47 ` Rob Herring
2015-05-21 3:47 ` Rob Herring
[not found] ` <CAL_Jsq+0zaKZJwgAPea25a=TrChOJs0LdCRV-R824=qij3pnTw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-21 9:54 ` Peter Chen
2015-05-21 9:54 ` Peter Chen
[not found] ` <BN3PR0301MB0849D35E915D701DE931EA9081C10-CEkquS/Gb83prP92dyGgc5wN6zqB+hSMnBOFsp37pqbUKgpGm//BTAC/G2K4zDHf@public.gmane.org>
2015-05-22 9:07 ` Peter Chen
2015-05-22 9:07 ` Peter Chen
2015-05-20 2:10 ` [PATCH v2 2/6] phy: Add Marvell USB 2.0 OTG 28nm PHY Rob Herring
2015-05-20 2:10 ` [PATCH v2 3/6] phy: add Marvell HSIC " Rob Herring
2015-05-20 2:10 ` [PATCH v2 4/6] dt-bindings: Consolidate ChipIdea USB ci13xxx bindings Rob Herring
[not found] ` <1432087805-16671-5-git-send-email-robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2015-05-21 1:46 ` Peter Chen
2015-05-21 1:46 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150521020314.GB26837@shlinux2 \
--to=peter.chen@freescale.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh@kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.