Re: Intel Baytrail Linux Audio

[Vinod Koul <vinod.koul@intel.com>]

On Tue, Jul 07, 2015 at 05:06:18PM -0400, Tyler Yeomans wrote:
> Vinod,
> 
> I have attached ... what I think is what you're looking for with
> regards to the dynamic debug output.
Sorry I should have been clearer. The dynamic debug allows you to enbale
debug logs without recompiling

So after boot:
echo -n 'module snd_soc_sst_mfld_platform +p' > /sys/kernel/debug/dynamic_debug/control

this will enable prints, so when you start audio, the firmware would be
downloaded, and please grab the dmesg ouput and send...

> 

> Additionally, the interrupts report as follows... none:
> $ cat /proc/interrupts | grep sst
>    7:          0          0          0          0   IO-APIC
> 28-fasteoi   intel_sst_driver
So this makes me suspect interrupts, we should have seen something here

Liam, do you know how whats different in BYT devices from interrupts. I
recall Jarkko saying some issues with the way interrupts are exposed..?

-- 
~Vinod
> 
> Tyler
> 
> On 07/07/2015 01:08 PM, Vinod Koul wrote:
> >On Tue, Jul 07, 2015 at 10:00:31AM -0400, Tyler Yeomans wrote:
> >>Vinod,
> >>
> >>I am using the ssp0 firmware from:
> >>https://git.kernel.org/cgit/linux/kernel/git/vkoul/firmware.git/tree/intel?h=byt.
> >Hi Tyler,
> >
> >Can you enable logs (dynamic debug should help), I want to see if FW
> >download was success or not
> >
> >Also cat /proc/interrupts to see if we are getting interrupts
> >
> >Thanks
>