From: Tyler Yeomans <tyeo098@gmail.com>
To: Vinod Koul <vinod.koul@intel.com>,
liam.r.girdwood@intel.com, jarkko.nikula@intel.com
Cc: alsa-devel@alsa-project.org
Subject: Re: Intel Baytrail Linux Audio
Date: Wed, 24 Jun 2015 10:24:54 -0400 [thread overview]
Message-ID: <558ABDB6.4010702@gmail.com> (raw)
In-Reply-To: <20150624101115.GI19530@localhost>
[-- Attachment #1: Type: text/plain, Size: 1868 bytes --]
Vinod,
Thank you for looking into this.
I have attached the dmesg for this device.
Please note I have tried kernels 3.16/19 4.0 and 4.1, all with same result.
The attached dmesg file is from booting kernel 4.1/amd64:
Linux mykro 4.1.0-040100-generic #201506220235 SMP Mon Jun 22 06:36:19
UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
On Ubuntu 15.04
I can give your direct access to the device through service like
Teamviewer if need be.
Again, thank you for looking into this.
Tyler
On 06/24/2015 06:11 AM, Vinod Koul wrote:
> On Tue, Jun 23, 2015 at 05:31:17PM -0400, Tyler Yeomans wrote:
>> Hello Vinod,
> Pls cc relevant mailing list, in this case alsa. I have cced Liam and Jarrko
> as well
>> I am writing to you because unfortunately I have exhausted my search
>> and I am unable to get ALSA sound working on my Baytrail minipc.
>> My dmesg only reports that: byt-rt5640 byt-rt5640: ASoC: CPU DAI
>> baytrail-pcm-audio not registered
>> aplay -l rightfully says there are no sound cards as the driver is
>> not registered.
> Can you give more details of your, does this enable HDA audio or I2S audio?
>
>> I have acquired the firmware file from the chromium repo here (https://kernel.googlesource.com/pub/scm/linux/kernel/git/firmware/linux-firmware/+/refs/heads/master/intel/fw_sst_0f28.bin-48kHz_i2s_master)
>> as was directed by the OP in this forum post:
>> http://ubuntuforums.org/showthread.php?t=2254631
>>
>> But unfortunately it seems the driver is still not loading
>> correctly, even on Ubuntu 15.04 with ALSA 1.0.28
> Do you have dmesg for us to look at so that we can see what might be going
> wrong
>
>> I see on gmane you are working on Skylake driver, could your work
>> there possibly be backported to the Baytrail/RT5640 chipset?
> No they are entirely different hw, so it will not work. We have uostream BYT
> driver and they should work
>
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 48918 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.0-040100-generic (kernel@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201506220235 SMP Mon Jun 22 06:36:19 UTC 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.1.0-040100-generic root=/dev/mmcblk0p2 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007c016fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c017000-0x000000007c046fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c047000-0x000000007c073fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007c074000-0x000000007c560fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c561000-0x000000007c664fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c665000-0x000000007c6a8fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007c6a9000-0x000000007cbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x7c073000 ACPI 2.0=0x7c073014 SMBIOS=0x7c664310
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: F1/F1, BIOS 5.6.5 04/23/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7cc00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 2 base 07D000000 mask FFF000000 uncachable
[ 0.000000] 3 base 07CE00000 mask FFFE00000 uncachable
[ 0.000000] 4 base 07CE00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 07CD00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2016MB, range: 32MB, type UC
[ 0.000000] reg 2, base: 2000MB, range: 16MB, type UC
[ 0.000000] reg 3, base: 1998MB, range: 2MB, type UC
[ 0.000000] reg 4, base: 1998MB, range: 2MB, type UC
[ 0.000000] reg 5, base: 1997MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 1997M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 1997MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 1998MB, range: 2MB, type UC
[ 0.000000] reg 3, base: 2000MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 2016MB, range: 32MB, type UC
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000005f000] 5f000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x031ea000, 0x031eafff] PGTABLE
[ 0.000000] BRK [0x031eb000, 0x031ebfff] PGTABLE
[ 0.000000] BRK [0x031ec000, 0x031ecfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7bc00000-0x7bdfffff]
[ 0.000000] [mem 0x7bc00000-0x7bdfffff] page 2M
[ 0.000000] BRK [0x031ed000, 0x031edfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x60000000-0x7bbfffff]
[ 0.000000] [mem 0x60000000-0x7bbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[ 0.000000] [mem 0x40000000-0x5fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7be00000-0x7c016fff]
[ 0.000000] [mem 0x7be00000-0x7bffffff] page 2M
[ 0.000000] [mem 0x7c000000-0x7c016fff] page 4k
[ 0.000000] BRK [0x031ee000, 0x031eefff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c6a9000-0x7cbfffff]
[ 0.000000] [mem 0x7c6a9000-0x7c7fffff] page 4k
[ 0.000000] [mem 0x7c800000-0x7cbfffff] page 2M
[ 0.000000] BRK [0x031ef000, 0x031effff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x350cc000-0x3685dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007C073014 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000007C072100 0000AC (v01 ALASKA A M I 00000003 MSFT 0100000D)
[ 0.000000] ACPI: FACP 0x000000007C06D000 00010C (v05 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: DSDT 0x000000007C05A000 00E5EF (v02 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: TCPA 0x000000007C071000 000032 (v02 00000000 00000000)
[ 0.000000] ACPI: UEFI 0x000000007C514000 000042 (v01 ALASKA A M I 00000000 00000000)
[ 0.000000] ACPI: BCFG 0x000000007C070000 0000BD (v01 ALASKA BATTCON 00000003 AMI 0100000D)
[ 0.000000] ACPI: OEM0 0x000000007C06F000 000084 (v05 ALASKA BATTERY 00000003 AMI 0100000D)
[ 0.000000] ACPI: DBG2 0x000000007C06E000 000072 (v00 ALASKA INTLDBG2 00000003 AMI 0100000D)
[ 0.000000] ACPI: HPET 0x000000007C06C000 000038 (v01 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: LPIT 0x000000007C06B000 000104 (v01 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: APIC 0x000000007C06A000 00006C (v03 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: MCFG 0x000000007C069000 00003C (v01 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: FPDT 0x000000007C053000 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007C052000 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000007C051000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000007C050000 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000007C04F000 000427 (v01 Intel_ Tpm2Tabl 00001000 INTL 20061109)
[ 0.000000] ACPI: TPM2 0x000000007C04E000 000034 (v03 00000000 00000000)
[ 0.000000] ACPI: CSRT 0x000000007C059000 00014C (v00 ALASKA A M I 00000005 INTL 20120624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007cbfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7be9a000-0x7be9efff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880076c00000-ffff880078bfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007cbfffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000007c016fff]
[ 0.000000] node 0: [mem 0x000000007c6a9000-0x000000007cbfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007cbfffff]
[ 0.000000] On node 0 totalpages: 508682
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 77 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7920 pages used for memmap
[ 0.000000] DMA32 zone: 504686 pages, LIFO batch:31
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0x7cf00000-0x7eefffff
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c017000-0x7c046fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c047000-0x7c073fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c074000-0x7c560fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c561000-0x7c664fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c665000-0x7c6a8fff]
[ 0.000000] e820: [mem 0x7ef00000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff88007bc00000 s100312 r8192 d30760 u524288
[ 0.000000] pcpu-alloc: s100312 r8192 d30760 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 500621
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1.0-040100-generic root=/dev/mmcblk0p2 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1913796K/2034728K available (8264K kernel code, 1235K rwdata, 3860K rodata, 1440K init, 1292K bss, 120932K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:1024 0
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Maximum core-clock to bus-clock ratio: 0x10
[ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[ 0.000000] TSC runs at 1331200 KHz
[ 0.000000] lapic_timer_frequency = 332800
[ 0.000000] tsc: Detected 1331.200 MHz processor
[ 0.000058] Calibrating delay loop (skipped), value calculated using timer frequency.. 2662.40 BogoMIPS (lpj=5324800)
[ 0.000066] pid_max: default: 32768 minimum: 301
[ 0.000080] ACPI: Core revision 20150410
[ 0.037503] ACPI: All ACPI Tables successfully acquired
[ 0.039196] Security Framework initialized
[ 0.039220] AppArmor: AppArmor initialized
[ 0.039224] Yama: becoming mindful.
[ 0.039669] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.041072] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.041720] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.041737] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.042225] Initializing cgroup subsys blkio
[ 0.042237] Initializing cgroup subsys memory
[ 0.042259] Initializing cgroup subsys devices
[ 0.042269] Initializing cgroup subsys freezer
[ 0.042276] Initializing cgroup subsys net_cls
[ 0.042283] Initializing cgroup subsys perf_event
[ 0.042292] Initializing cgroup subsys net_prio
[ 0.042300] Initializing cgroup subsys hugetlb
[ 0.042347] CPU: Physical Processor ID: 0
[ 0.042352] CPU: Processor Core ID: 0
[ 0.042360] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.042364] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.047270] mce: CPU supports 6 MCE banks
[ 0.047284] CPU0: Thermal monitoring enabled (TM1)
[ 0.047291] process: using mwait in idle threads
[ 0.047300] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.047304] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.047605] Freeing SMP alternatives memory: 28K (ffffffff8209e000 - ffffffff820a5000)
[ 0.054679] ftrace: allocating 33528 entries in 131 pages
[ 0.084274] TSC deadline timer enabled
[ 0.084285] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3735F @ 1.33GHz (fam: 06, model: 37, stepping: 08)
[ 0.084339] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.084361] ... version: 3
[ 0.084365] ... bit width: 40
[ 0.084368] ... generic registers: 2
[ 0.084371] ... value mask: 000000ffffffffff
[ 0.084374] ... max period: 000000ffffffffff
[ 0.084378] ... fixed-purpose events: 3
[ 0.084381] ... event mask: 0000000700000003
[ 0.086629] x86: Booting SMP configuration:
[ 0.086637] .... node #0, CPUs: #1
[ 0.104733] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.105119] #2 #3
[ 0.141332] x86: Booted up 1 node, 4 CPUs
[ 0.141340] smpboot: Total of 4 processors activated (10649.60 BogoMIPS)
[ 0.142711] devtmpfs: initialized
[ 0.155606] evm: security.selinux
[ 0.155611] evm: security.SMACK64
[ 0.155615] evm: security.SMACK64EXEC
[ 0.155618] evm: security.SMACK64TRANSMUTE
[ 0.155621] evm: security.SMACK64MMAP
[ 0.155624] evm: security.ima
[ 0.155627] evm: security.capability
[ 0.155797] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.155804] PM: Registering ACPI NVS region [mem 0x7c074000-0x7c560fff] (5165056 bytes)
[ 0.156212] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.156433] pinctrl core: initialized pinctrl subsystem
[ 0.156709] RTC time: 20:30:07, date: 06/23/15
[ 0.157089] NET: Registered protocol family 16
[ 0.161377] cpuidle: using governor ladder
[ 0.165380] cpuidle: using governor menu
[ 0.165554] ACPI: bus type PCI registered
[ 0.165561] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.165774] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.165782] PCI: not using MMCONFIG
[ 0.165787] PCI: Using configuration type 1 for base access
[ 0.174537] ACPI: Added _OSI(Module Device)
[ 0.174544] ACPI: Added _OSI(Processor Device)
[ 0.174549] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.174553] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.200971] ACPI: Dynamic OEM Table Load:
[ 0.200995] ACPI: SSDT 0xFFFF880076B2A800 000501 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.202904] ACPI: Dynamic OEM Table Load:
[ 0.202925] ACPI: SSDT 0xFFFF880076B2B000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.205468] ACPI: Dynamic OEM Table Load:
[ 0.205487] ACPI: SSDT 0xFFFF880076B90A00 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.207314] ACPI: Dynamic OEM Table Load:
[ 0.207333] ACPI: SSDT 0xFFFF880076BA6600 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.211162] ACPI: Interpreter enabled
[ 0.211180] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[ 0.211194] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[ 0.211206] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150410/hwxface-580)
[ 0.211218] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150410/hwxface-580)
[ 0.211239] ACPI: (supports S0 S5)
[ 0.211244] ACPI: Using IOAPIC for interrupt routing
[ 0.211308] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.220843] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[ 0.220850] PCI: not using MMCONFIG
[ 0.220889] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.227101] ACPI: Power Resource [USBC] (on)
[ 0.228550] ACPI: Power Resource [WWPR] (off)
[ 0.234610] ACPI: Power Resource [PLPE] (on)
[ 0.246157] ACPI: Power Resource [CLK0] (on)
[ 0.246285] ACPI: Power Resource [CLK1] (on)
[ 0.252980] ACPI: Power Resource [P28X] (off)
[ 0.253112] ACPI: Power Resource [P18X] (off)
[ 0.253247] ACPI: Power Resource [P28P] (off)
[ 0.253380] ACPI: Power Resource [P18P] (off)
[ 0.253520] ACPI: Power Resource [P28T] (off)
[ 0.253654] ACPI: Power Resource [P18T] (off)
[ 0.253781] ACPI: Power Resource [P1XT] (off)
[ 0.256849] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.256866] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.256995] \_SB_.PCI0:_OSC invalid UUID
[ 0.257000] _OSC request data:1 1e 0
[ 0.257012] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.257408] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.257955] PCI host bridge to bus 0000:00
[ 0.257965] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.257972] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.257978] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.257984] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.257990] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.257997] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.258003] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.258009] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.258015] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff window]
[ 0.258021] pci_bus 0000:00: root bus resource [mem 0x7cf00001-0x7ef00000 window]
[ 0.258027] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe window]
[ 0.258033] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[ 0.258050] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.258313] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.258335] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[ 0.258352] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 0.258369] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007]
[ 0.258642] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.258670] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
[ 0.258748] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.258990] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.259018] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[ 0.259034] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[ 0.259132] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.259371] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.260595] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.260791] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.260984] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.261178] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.261370] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.261586] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.261779] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.261973] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.274045] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.274054] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.274059] vgaarb: loaded
[ 0.274063] vgaarb: bridge control possible 0000:00:02.0
[ 0.274760] SCSI subsystem initialized
[ 0.274890] libata version 3.00 loaded.
[ 0.274981] ACPI: bus type USB registered
[ 0.275048] usbcore: registered new interface driver usbfs
[ 0.275085] usbcore: registered new interface driver hub
[ 0.275146] usbcore: registered new device driver usb
[ 0.275726] PCI: Using ACPI for IRQ routing
[ 0.275733] PCI: pci_cache_line_size set to 64 bytes
[ 0.275760] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.275767] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.275773] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.275777] e820: reserve RAM buffer [mem 0x7c017000-0x7fffffff]
[ 0.275783] e820: reserve RAM buffer [mem 0x7cc00000-0x7fffffff]
[ 0.276107] NetLabel: Initializing
[ 0.276112] NetLabel: domain hash size = 128
[ 0.276115] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.276147] NetLabel: unlabeled traffic allowed by default
[ 0.276418] Switched to clocksource refined-jiffies
[ 0.294056] AppArmor: AppArmor Filesystem Enabled
[ 0.294262] pnp: PnP ACPI init
[ 0.294418] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.294741] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.294750] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.294757] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.294763] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.294770] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.294781] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.295065] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.298335] pnp: PnP ACPI: found 3 devices
[ 0.304674] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.304683] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.304690] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.304696] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.304702] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.304708] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.304714] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.304721] pci_bus 0000:00: resource 11 [mem 0x90c00000-0x90ffffff window]
[ 0.304727] pci_bus 0000:00: resource 12 [mem 0x7cf00001-0x7ef00000 window]
[ 0.304733] pci_bus 0000:00: resource 13 [mem 0x80000000-0x908ffffe window]
[ 0.304739] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[ 0.304823] NET: Registered protocol family 2
[ 0.305277] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.305395] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.305513] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.305580] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.305619] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.305778] NET: Registered protocol family 1
[ 0.305820] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.306191] PCI: CLS 0 bytes, default 64
[ 0.306345] Trying to unpack rootfs image as initramfs...
[ 1.353129] Freeing initrd memory: 24136K (ffff8800350cc000 - ffff88003685e000)
[ 1.353520] microcode: CPU0 sig=0x30678, pf=0x2, revision=0x82f
[ 1.353539] microcode: CPU1 sig=0x30678, pf=0x2, revision=0x82f
[ 1.353559] microcode: CPU2 sig=0x30678, pf=0x2, revision=0x82f
[ 1.353578] microcode: CPU3 sig=0x30678, pf=0x2, revision=0x82f
[ 1.353735] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.353860] Scanning for low memory corruption every 60 seconds
[ 1.354898] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.354935] Initialise system trusted keyring
[ 1.354994] audit: initializing netlink subsys (disabled)
[ 1.355037] audit: type=2000 audit(1435091408.276:1): initialized
[ 1.355820] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.361050] zpool: loaded
[ 1.361057] zbud: loaded
[ 1.361460] VFS: Disk quotas dquot_6.6.0
[ 1.361579] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.363179] fuse init (API version 7.23)
[ 1.363623] Key type big_key registered
[ 1.364458] Key type asymmetric registered
[ 1.364467] Asymmetric key parser 'x509' registered
[ 1.364591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.364690] io scheduler noop registered
[ 1.364700] io scheduler deadline registered (default)
[ 1.364839] io scheduler cfq registered
[ 1.365097] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.365155] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.365272] efifb: probing for efifb
[ 1.365337] efifb: framebuffer at 0x80000000, mapped to 0xffffc90000800000, using 8128k, total 8128k
[ 1.365343] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.365346] efifb: scrolling: redraw
[ 1.365351] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.384418] Console: switching to colour frame buffer device 240x67
[ 1.403159] fb0: EFI VGA frame buffer device
[ 1.403191] intel_idle: MWAIT substates: 0x33000020
[ 1.403197] intel_idle: v0.4 model 0x37
[ 1.403201] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.408552] [Firmware Bug]: No valid trip found
[ 1.408666] GHES: HEST is not enabled!
[ 1.408948] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.429095] 00:02: ttyS0 at I/O 0x3f8 (irq = 198, base_baud = 115200) is a 16550A
[ 1.433748] hpet: number irqs doesn't agree with number of timers
[ 1.433916] Linux agpgart interface v0.103
[ 1.441322] brd: module loaded
[ 1.444489] loop: module loaded
[ 1.445144] libphy: Fixed MDIO Bus: probed
[ 1.445155] tun: Universal TUN/TAP device driver, 1.6
[ 1.445159] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.445317] PPP generic driver version 2.4.2
[ 1.445755] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.445780] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.446198] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 1.446210] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.446406] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.446414] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.446419] usb usb1: Product: xHCI Host Controller
[ 1.446425] usb usb1: Manufacturer: Linux 4.1.0-040100-generic xhci-hcd
[ 1.446430] usb usb1: SerialNumber: 0000:00:14.0
[ 1.446774] hub 1-0:1.0: USB hub found
[ 1.446803] hub 1-0:1.0: 6 ports detected
[ 1.953480] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.953495] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.953628] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.953635] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.953641] usb usb2: Product: xHCI Host Controller
[ 1.953646] usb usb2: Manufacturer: Linux 4.1.0-040100-generic xhci-hcd
[ 1.953651] usb usb2: SerialNumber: 0000:00:14.0
[ 1.954109] hub 2-0:1.0: USB hub found
[ 1.954136] hub 2-0:1.0: 1 port detected
[ 1.954532] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.954551] ehci-pci: EHCI PCI platform driver
[ 1.954594] ehci-platform: EHCI generic platform driver
[ 1.954644] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.954658] ohci-pci: OHCI PCI platform driver
[ 1.954692] ohci-platform: OHCI generic platform driver
[ 1.954725] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.954874] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.253713] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 2.327166] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x13303f810e3, max_idle_ns: 440795235405 ns
[ 2.989170] i8042: No controller found
[ 2.989257] Switched to clocksource tsc
[ 2.989764] mousedev: PS/2 mouse device common for all mice
[ 2.989944] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20150410/evxface-654)
[ 2.990218] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 2.990385] rtc_cmos: probe of 00:00 failed with error -22
[ 2.990484] i2c /dev entries driver
[ 2.990640] device-mapper: uevent: version 1.0.3
[ 2.990892] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
[ 2.990923] Intel P-state driver initializing.
[ 2.991164] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.991174] EFI Variables Facility v0.08 2004-May-17
[ 2.995382] PCCT header not found.
[ 2.995825] NET: Registered protocol family 10
[ 2.996247] NET: Registered protocol family 17
[ 2.996273] Key type dns_resolver registered
[ 2.997845] Loading compiled-in X.509 certificates
[ 3.000154] Loaded X.509 cert 'Build time autogenerated kernel key: a8a881c200cacfb3caeacfaf74c5469c22796873'
[ 3.000186] registered taskstats version 1
[ 3.010406] Key type trusted registered
[ 3.010984] usb 1-1: New USB device found, idVendor=0bda, idProduct=8152
[ 3.010990] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.010995] usb 1-1: Product: USB 10/100 LAN
[ 3.010999] usb 1-1: Manufacturer: Realtek
[ 3.011002] usb 1-1: SerialNumber: 00E04C360027
[ 3.032829] Key type encrypted registered
[ 3.032848] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.032856] ima: No TPM chip found, activating TPM-bypass!
[ 3.032906] evm: HMAC attrs: 0x1
[ 3.033611] Magic number: 3:329:549
[ 3.033648] tty ttyS25: hash matches
[ 3.033664] clockevents clockevent0: hash matches
[ 3.033723] acpi PNP0C0F:00: hash matches
[ 3.033758] hctosys: unable to open rtc device (rtc0)
[ 3.034108] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.034111] EDD information not available.
[ 3.034369] PM: Hibernation image not present or could not be loaded.
[ 3.036259] Freeing unused kernel memory: 1440K (ffffffff81f36000 - ffffffff8209e000)
[ 3.036265] Write protecting the kernel read-only data: 14336k
[ 3.038990] Freeing unused kernel memory: 1964K (ffff880002815000 - ffff880002a00000)
[ 3.039897] Freeing unused kernel memory: 236K (ffff880002dc5000 - ffff880002e00000)
[ 3.086508] random: systemd-udevd urandom read with 2 bits of entropy available
[ 3.120797] sdhci: Secure Digital Host Controller Interface driver
[ 3.120803] sdhci: Copyright(c) Pierre Ossman
[ 3.127797] sdhci-acpi 80860F14:00: No vmmc regulator found
[ 3.127806] sdhci-acpi 80860F14:00: No vqmmc regulator found
[ 3.132735] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 3.133958] sdhci-acpi INT33BB:00: No vmmc regulator found
[ 3.133964] sdhci-acpi INT33BB:00: No vqmmc regulator found
[ 3.137513] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
[ 3.138896] sdhci-acpi 80860F14:02: No vmmc regulator found
[ 3.138903] sdhci-acpi 80860F14:02: No vqmmc regulator found
[ 3.142539] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[ 3.164947] [drm] Initialized drm 1.1.0 20060810
[ 3.177078] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 3.227386] [drm] Memory usable by graphics device = 2048M
[ 3.227396] checking generic (80000000 7f0000) vs hw (80000000 10000000)
[ 3.227400] fb: switching to inteldrmfb from EFI VGA
[ 3.227445] Console: switching to colour dummy device 80x25
[ 3.227680] [drm] Replacing VGA console driver
[ 3.231367] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.231374] [drm] Driver supports precise vblank timestamp query.
[ 3.241959] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.277610] [drm] failed to retrieve link info, disabling eDP
[ 3.308933] mmc0: MAN_BKOPS_EN bit is not set
[ 3.309843] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.310164] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 3.310188] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.310203] usb 1-2: Product: USB2.0 Hub
[ 3.311206] acpi device:09: registered as cooling_device4
[ 3.311399] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input0
[ 3.312053] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[ 3.313684] hub 1-2:1.0: USB hub found
[ 3.314070] hub 1-2:1.0: 4 ports detected
[ 3.319571] mmc0: new HS200 MMC card at address 0001
[ 3.324592] mmcblk0: mmc0:0001 SEM32G 29.1 GiB
[ 3.324781] mmcblk0boot0: mmc0:0001 SEM32G partition 1 4.00 MiB
[ 3.325214] mmcblk0boot1: mmc0:0001 SEM32G partition 2 4.00 MiB
[ 3.325390] mmcblk0rpmb: mmc0:0001 SEM32G partition 3 4.00 MiB
[ 3.328197] mmcblk0: p1 p2 p3
[ 3.360673] fbcon: inteldrmfb (fb0) is primary device
[ 3.412489] mmc1: new high speed SDIO card at address 0001
[ 3.589147] usb 1-2.1: new low-speed USB device number 4 using xhci_hcd
[ 3.617394] Console: switching to colour frame buffer device 240x67
[ 3.631621] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.631625] i915 0000:00:02.0: registered panic notifier
[ 3.685317] usb 1-2.1: New USB device found, idVendor=192f, idProduct=0916
[ 3.685321] usb 1-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.685327] usb 1-2.1: Product: USB Optical Mouse
[ 3.685637] usb 1-2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.694436] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.701988] usbcore: registered new interface driver usbhid
[ 3.701994] usbhid: USB HID core driver
[ 3.705593] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:192F:0916.0001/input/input1
[ 3.706156] hid-generic 0003:192F:0916.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-2.1/input0
[ 3.765483] usb 1-2.2: new low-speed USB device number 5 using xhci_hcd
[ 3.869974] usb 1-2.2: New USB device found, idVendor=1c4f, idProduct=0002
[ 3.869982] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.869986] usb 1-2.2: Product: USB Keykoard
[ 3.869990] usb 1-2.2: Manufacturer: USB
[ 3.870511] usb 1-2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.870523] usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.874131] input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:1C4F:0002.0002/input/input2
[ 3.930155] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:14.0-2.2/input0
[ 3.934924] input: USB USB Keykoard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:1C4F:0002.0003/input/input3
[ 3.989962] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:14.0-2.2/input1
[ 4.061760] usb 1-2.3: new low-speed USB device number 6 using xhci_hcd
[ 4.122148] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.157636] usb 1-2.3: New USB device found, idVendor=0755, idProduct=3317
[ 4.157644] usb 1-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.157649] usb 1-2.3: Product: iRFmedia_cIR
[ 4.162599] input: iRFmedia_cIR as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:0755:3317.0004/input/input4
[ 4.221773] hid-generic 0003:0755:3317.0004: input,hidraw3: USB HID v1.10 Keyboard [iRFmedia_cIR] on usb-0000:00:14.0-2.3/input0
[ 4.227332] input: iRFmedia_cIR as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0755:3317.0005/input/input5
[ 4.286801] hid-generic 0003:0755:3317.0005: input,hidraw4: USB HID v1.10 Mouse [iRFmedia_cIR] on usb-0000:00:14.0-2.3/input1
[ 4.361509] usb 1-2.4: new high-speed USB device number 7 using xhci_hcd
[ 4.368617] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time.
[ 4.399789] systemd[1]: Inserted module 'autofs4'
[ 4.426718] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 4.427109] systemd[1]: Detected architecture x86-64.
[ 4.428407] systemd[1]: Set hostname to <mykro>.
[ 4.449786] usb 1-2.4: New USB device found, idVendor=05e3, idProduct=0608
[ 4.449794] usb 1-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.449799] usb 1-2.4: Product: USB2.0 Hub
[ 4.450556] hub 1-2.4:1.0: USB hub found
[ 4.450825] hub 1-2.4:1.0: 4 ports detected
[ 4.625665] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.625695] systemd[1]: Starting Remote File Systems (Pre).
[ 4.625858] systemd[1]: Created slice Root Slice.
[ 4.625883] systemd[1]: Starting Root Slice.
[ 4.626037] systemd[1]: Listening on udev Control Socket.
[ 4.626061] systemd[1]: Starting udev Control Socket.
[ 4.626246] systemd[1]: Listening on Journal Socket.
[ 4.626281] systemd[1]: Starting Journal Socket.
[ 4.626598] systemd[1]: Created slice System Slice.
[ 4.626634] systemd[1]: Starting System Slice.
[ 4.628039] systemd[1]: Starting Uncomplicated firewall...
[ 4.629675] systemd[1]: Starting Nameserver information manager...
[ 4.631561] systemd[1]: Started Read required files in advance.
[ 4.632077] systemd[1]: Starting Read required files in advance...
[ 4.634030] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.636056] systemd[1]: Starting Setup Virtual Console...
[ 4.638210] systemd[1]: Mounting Debug File System...
[ 4.638826] systemd[1]: Created slice system-getty.slice.
[ 4.638893] systemd[1]: Starting system-getty.slice.
[ 4.639137] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.639177] systemd[1]: Starting LVM2 metadata daemon socket.
[ 4.639413] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.639441] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.639718] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.639747] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 4.640410] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.640450] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.640701] systemd[1]: Listening on Journal Audit Socket.
[ 4.640730] systemd[1]: Starting Journal Audit Socket.
[ 4.641143] systemd[1]: Created slice User and Session Slice.
[ 4.641171] systemd[1]: Starting User and Session Slice.
[ 4.641323] systemd[1]: Reached target Slices.
[ 4.641350] systemd[1]: Starting Slices.
[ 4.643116] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 4.645178] systemd[1]: Mounting Huge Pages File System...
[ 4.647173] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.647476] systemd[1]: Reached target Encrypted Volumes.
[ 4.647527] systemd[1]: Starting Encrypted Volumes.
[ 4.662706] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.662970] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.663002] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.663445] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.663474] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 4.663662] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.663689] systemd[1]: Starting Journal Socket (/dev/log).
[ 4.663854] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.663882] systemd[1]: Starting fsck to fsckd communication Socket.
[ 4.673158] systemd[1]: Starting Load Kernel Modules...
[ 4.673493] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.673535] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.675314] systemd[1]: Starting Increase datagram queue length...
[ 4.677576] systemd[1]: Started Braille Device Support.
[ 4.677859] systemd[1]: Starting Braille Device Support...
[ 4.678156] systemd[1]: Listening on udev Kernel Socket.
[ 4.678187] systemd[1]: Starting udev Kernel Socket.
[ 4.680026] systemd[1]: Starting udev Coldplug all Devices...
[ 4.682800] systemd[1]: Mounted Debug File System.
[ 4.683117] systemd[1]: Mounted Huge Pages File System.
[ 4.683358] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.684188] systemd[1]: Started Uncomplicated firewall.
[ 4.686425] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 4.687353] systemd[1]: Started Setup Virtual Console.
[ 4.692963] systemd[1]: Started Increase datagram queue length.
[ 4.701388] systemd[1]: Started Nameserver information manager.
[ 4.753726] systemd[1]: Listening on Syslog Socket.
[ 4.753765] systemd[1]: Starting Syslog Socket.
[ 4.755826] systemd[1]: Starting Journal Service...
[ 4.757946] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 4.763492] lp: driver loaded but no devices found
[ 4.772114] systemd[1]: Started udev Coldplug all Devices.
[ 4.774285] systemd[1]: Starting udev Wait for Complete Device Initialization...
[ 4.776297] ppdev: user-space parallel port driver
[ 4.861086] systemd[1]: Started Load Kernel Modules.
[ 4.863232] systemd[1]: Starting Apply Kernel Variables...
[ 4.863541] systemd[1]: Mounted Configuration File System.
[ 4.865337] systemd[1]: Mounting FUSE Control File System...
[ 4.872033] systemd[1]: Mounted FUSE Control File System.
[ 4.880063] systemd[1]: Started Apply Kernel Variables.
[ 4.893385] systemd[1]: Started Create Static Device Nodes in /dev.
[ 4.895548] systemd[1]: Starting udev Kernel Device Manager...
[ 4.915450] systemd[1]: Started Journal Service.
[ 5.105927] 80860F0A:00: ttyS4 at MMIO 0x9093b000 (irq = 191, base_baud = 2764800) is a 16550A
[ 5.106881] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 5.107698] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 5.108688] 80860F0A:01: ttyS5 at MMIO 0x90941000 (irq = 192, base_baud = 2764800) is a 16550A
[ 5.121000] axp20x i2c-INT33F4:00: AXP20x variant AXP288 found
[ 5.210183] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[ 5.210191] mei_txe 0000:00:1a.0: PCI INT A: no GSI
[ 5.272947] axp20x i2c-INT33F4:00: AXP20X driver loaded
[ 5.274282] [Firmware Bug]: No valid trip found
[ 5.310051] usbcore: registered new interface driver r8152
[ 5.320447] Goodix-TS i2c-GDIX1001:00: i2c test failed attempt 1: -121
[ 5.348270] usbcore: registered new interface driver cdc_ether
[ 5.360403] Goodix-TS i2c-GDIX1001:00: i2c test failed attempt 2: -121
[ 5.384394] Goodix-TS i2c-GDIX1001:00: I2C communication failure: -121
[ 5.408613] Goodix-TS: probe of i2c-GDIX1001:00 failed with error -121
[ 5.476574] usb 1-1: reset high-speed USB device number 2 using xhci_hcd
[ 5.554794] SSE version of gcm_enc/dec engaged.
[ 5.631399] r8152 1-1:1.0 eth0: v1.08.0 (2015/01/13)
[ 5.641349] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input6
[ 5.641692] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input7
[ 5.778611] Adding 1091580k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:1091580k SSFS
[ 5.839297] intel_rapl: Found RAPL domain package
[ 5.839306] intel_rapl: Found RAPL domain core
[ 6.012196] (NULL device *): ipc: error DSP boot timeout
[ 6.012386] byt-rt5640 byt-rt5640: ASoC: CPU DAI baytrail-pcm-audio not registered
[ 6.795575] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 6.831433] systemd-journald[284]: Received request to flush runtime journal from PID 1
[ 6.873892] random: nonblocking pool is initialized
[ 7.046149] audit: type=1400 audit(1435105814.011:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=517 comm="apparmor_parser"
[ 7.046172] audit: type=1400 audit(1435105814.011:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=517 comm="apparmor_parser"
[ 7.052422] audit: type=1400 audit(1435105814.019:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=517 comm="apparmor_parser"
[ 7.052445] audit: type=1400 audit(1435105814.019:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=517 comm="apparmor_parser"
[ 7.052461] audit: type=1400 audit(1435105814.019:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=517 comm="apparmor_parser"
[ 7.052476] audit: type=1400 audit(1435105814.019:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=517 comm="apparmor_parser"
[ 7.083090] audit: type=1400 audit(1435105814.047:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=517 comm="apparmor_parser"
[ 7.083112] audit: type=1400 audit(1435105814.047:9): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=517 comm="apparmor_parser"
[ 7.083127] audit: type=1400 audit(1435105814.047:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=517 comm="apparmor_parser"
[ 7.083142] audit: type=1400 audit(1435105814.047:11): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=517 comm="apparmor_parser"
[ 7.382457] cgroup: new mount options do not match the existing superblock, will be ignored
[ 7.707466] cfg80211: Calling CRDA to update world regulatory domain
[ 7.714543] cfg80211: World regulatory domain updated:
[ 7.714552] cfg80211: DFS Master region: unset
[ 7.714555] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.714562] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7.714567] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7.714571] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7.714575] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7.714587] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[18313.314146] perf interrupt took too long (2537 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[42661.156746] perf interrupt took too long (5008 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
next prev parent reply other threads:[~2015-06-24 14:24 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <5589D025.7090700@gmail.com>
2015-06-24 10:11 ` Intel Baytrail Linux Audio Vinod Koul
2015-06-24 14:24 ` Tyler Yeomans [this message]
2015-06-24 16:03 ` Vinod Koul
2015-06-24 17:40 ` Tyler Yeomans
2015-06-25 6:38 ` Jarkko Nikula
2015-06-30 18:24 ` Tyler Yeomans
2015-06-30 22:57 ` Tyler Yeomans
2015-07-02 18:40 ` Nicolas George
2015-07-03 8:51 ` Liam Girdwood
2015-07-03 9:08 ` Antonio Ospite
2015-07-03 9:46 ` Nicolas George
2015-07-03 10:32 ` Antonio Ospite
2015-07-03 11:12 ` Nicolas George
2015-07-03 12:10 Koul, Vinod
2015-07-03 12:36 ` Antonio Ospite
2015-07-03 13:06 ` Nicolas George
[not found] ` <559A90CE.2030105@gmail.com>
[not found] ` <20150707031950.GD11002@localhost>
2015-07-07 14:00 ` Tyler Yeomans
2015-07-07 17:08 ` Vinod Koul
2015-07-07 21:06 ` Tyler Yeomans
2015-07-08 3:36 ` Vinod Koul
2015-07-08 8:23 ` Antonio Ospite
2015-07-08 14:30 ` Tyler Yeomans
2015-07-08 16:21 ` Antonio Ospite
2015-07-08 16:32 ` Tyler Yeomans
2015-07-08 20:17 ` Antonio Ospite
2015-07-08 20:24 ` tyeo098
[not found] ` <559EC436.30900@gmail.com>
2015-07-10 4:06 ` Vinod Koul
2015-07-10 12:41 ` Tyler Yeomans
2015-07-13 17:06 ` Tyler Yeomans
2015-07-14 8:47 ` Vinod Koul
2015-07-23 15:24 ` Tyler Yeomans
2015-07-10 4:03 ` Vinod Koul
2015-07-08 20:57 ` Luka Karinja
[not found] ` <559D88C1.3010504@bazdara.com>
2015-07-10 4:00 ` Vinod Koul
2015-07-10 15:24 ` Luka Karinja
-- strict thread matches above, loose matches on Subject: below --
2015-07-03 13:43 Koul, Vinod
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=558ABDB6.4010702@gmail.com \
--to=tyeo098@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=jarkko.nikula@intel.com \
--cc=liam.r.girdwood@intel.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.