* Regression in v4.2-rc1 caused by hierarchical irqdomain changes
@ 2015-07-27 15:21 ` Matt Fleming
0 siblings, 0 replies; 17+ messages in thread
From: Matt Fleming @ 2015-07-27 15:21 UTC (permalink / raw)
To: Jiang Liu
Cc: Thomas Gleixner, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
H. Peter Anvin, Ingo Molnar, Wolfram Sang,
linux-i2c-u79uwXL29TY76Z2rM5mHXA
A git bisect just pointed me at commit d32932d02e18 ("x86/irq: Convert
IOAPIC to use hierarchical irqdomain interfaces") as the reason for why
the trackpad on my Dell XPS13 is no longer working with v4.2-rc1.
I'm now seeing the following errors when booting,
[ 1.615017] i2c_designware INT3433:00: controller timed out
[ 1.642496] i2c_designware INT3433:00: timeout in disabling adapter
[ 1.642500] i2c_hid i2c-DLL0665:01: hid_descr_cmd failed
I tried commit d32932d02e18~1, which works, and things definitely break
starting with commit d32932d02e18.
Any suggestions or requests to try and diagnose why the irqdomain
changes broke this i2c controller driver?
--
Matt Fleming, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 17+ messages in thread* Regression in v4.2-rc1 caused by hierarchical irqdomain changes @ 2015-07-27 15:21 ` Matt Fleming 0 siblings, 0 replies; 17+ messages in thread From: Matt Fleming @ 2015-07-27 15:21 UTC (permalink / raw) To: Jiang Liu Cc: Thomas Gleixner, linux-kernel, H. Peter Anvin, Ingo Molnar, Wolfram Sang, linux-i2c A git bisect just pointed me at commit d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") as the reason for why the trackpad on my Dell XPS13 is no longer working with v4.2-rc1. I'm now seeing the following errors when booting, [ 1.615017] i2c_designware INT3433:00: controller timed out [ 1.642496] i2c_designware INT3433:00: timeout in disabling adapter [ 1.642500] i2c_hid i2c-DLL0665:01: hid_descr_cmd failed I tried commit d32932d02e18~1, which works, and things definitely break starting with commit d32932d02e18. Any suggestions or requests to try and diagnose why the irqdomain changes broke this i2c controller driver? -- Matt Fleming, Intel Open Source Technology Center ^ permalink raw reply [flat|nested] 17+ messages in thread
[parent not found: <20150727152107.GA3571-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org>]
* Re: Regression in v4.2-rc1 caused by hierarchical irqdomain changes 2015-07-27 15:21 ` Matt Fleming @ 2015-07-27 16:35 ` Jiang Liu -1 siblings, 0 replies; 17+ messages in thread From: Jiang Liu @ 2015-07-27 16:35 UTC (permalink / raw) To: Matt Fleming Cc: Thomas Gleixner, linux-kernel-u79uwXL29TY76Z2rM5mHXA, H. Peter Anvin, Ingo Molnar, Wolfram Sang, linux-i2c-u79uwXL29TY76Z2rM5mHXA On 2015/7/27 23:21, Matt Fleming wrote: > A git bisect just pointed me at commit d32932d02e18 ("x86/irq: Convert > IOAPIC to use hierarchical irqdomain interfaces") as the reason for why > the trackpad on my Dell XPS13 is no longer working with v4.2-rc1. > > I'm now seeing the following errors when booting, > > [ 1.615017] i2c_designware INT3433:00: controller timed out > [ 1.642496] i2c_designware INT3433:00: timeout in disabling adapter > [ 1.642500] i2c_hid i2c-DLL0665:01: hid_descr_cmd failed > > I tried commit d32932d02e18~1, which works, and things definitely break > starting with commit d32932d02e18. > > Any suggestions or requests to try and diagnose why the irqdomain > changes broke this i2c controller driver? Hi Matt, Sorry for the regression. Could you please help to provide more information about the regression, such dmesg, /proc/interrupts and hardware(PCI) info from good and bad kernels? Thanks! Gerry ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Regression in v4.2-rc1 caused by hierarchical irqdomain changes @ 2015-07-27 16:35 ` Jiang Liu 0 siblings, 0 replies; 17+ messages in thread From: Jiang Liu @ 2015-07-27 16:35 UTC (permalink / raw) To: Matt Fleming Cc: Thomas Gleixner, linux-kernel, H. Peter Anvin, Ingo Molnar, Wolfram Sang, linux-i2c On 2015/7/27 23:21, Matt Fleming wrote: > A git bisect just pointed me at commit d32932d02e18 ("x86/irq: Convert > IOAPIC to use hierarchical irqdomain interfaces") as the reason for why > the trackpad on my Dell XPS13 is no longer working with v4.2-rc1. > > I'm now seeing the following errors when booting, > > [ 1.615017] i2c_designware INT3433:00: controller timed out > [ 1.642496] i2c_designware INT3433:00: timeout in disabling adapter > [ 1.642500] i2c_hid i2c-DLL0665:01: hid_descr_cmd failed > > I tried commit d32932d02e18~1, which works, and things definitely break > starting with commit d32932d02e18. > > Any suggestions or requests to try and diagnose why the irqdomain > changes broke this i2c controller driver? Hi Matt, Sorry for the regression. Could you please help to provide more information about the regression, such dmesg, /proc/interrupts and hardware(PCI) info from good and bad kernels? Thanks! Gerry ^ permalink raw reply [flat|nested] 17+ messages in thread
[parent not found: <55B65DD8.9020002-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>]
* Re: Regression in v4.2-rc1 caused by hierarchical irqdomain changes 2015-07-27 16:35 ` Jiang Liu @ 2015-07-27 21:15 ` Matt Fleming -1 siblings, 0 replies; 17+ messages in thread From: Matt Fleming @ 2015-07-27 21:15 UTC (permalink / raw) To: Jiang Liu Cc: Thomas Gleixner, linux-kernel-u79uwXL29TY76Z2rM5mHXA, H. Peter Anvin, Ingo Molnar, Wolfram Sang, linux-i2c-u79uwXL29TY76Z2rM5mHXA [-- Attachment #1: Type: text/plain, Size: 7074 bytes --] On Tue, 28 Jul, at 12:35:36AM, Jiang Liu wrote: > Hi Matt, > Sorry for the regression. Could you please help to provide > more information about the regression, such dmesg, /proc/interrupts > and hardware(PCI) info from good and bad kernels? See below. Let me know if you need anything else. 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09) 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Broadwell-U Camarillo Device (rev 09) 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03) 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03) 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3) 00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3) 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03) 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03) 01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI Express Card Reader (rev 01) 02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59) [BAD] CPU0 CPU1 CPU2 CPU3 0: 60 0 0 0 IR-IO-APIC 2-edge timer 1: 4535 2225 12990 2486 IR-IO-APIC 1-edge i8042 3: 1 0 0 0 IR-IO-APIC 3-edge 6: 0 0 0 0 IR-IO-APIC 6-edge dw_dmac 7: 15 1 0 0 IR-IO-APIC 7-edge INT3432:00, INT3433:00 8: 0 0 1 0 IR-IO-APIC 8-edge rtc0 9: 1078 737 1761 536 IR-IO-APIC 9-fasteoi acpi 12: 5 4 64 13 IR-IO-APIC 12-edge i8042 40: 0 0 0 0 DMAR-MSI 0-edge dmar0 41: 0 0 0 0 DMAR-MSI 1-edge dmar1 42: 0 0 0 0 IR-PCI-MSI 458752-edge PCIe PME 43: 0 0 0 0 IR-PCI-MSI 464896-edge PCIe PME 44: 263825 97055 149799 86574 IR-PCI-MSI 32768-edge i915 45: 4 1 20 1 IR-PCI-MSI 360448-edge mei_me 46: 8 7 10 5 IR-PCI-MSI 524288-edge rtsx_pci 47: 265262 96130 273599 126469 IR-PCI-MSI 512000-edge 0000:00:1f.2 48: 6151 3298 11082 2702 IR-PCI-MSI 327680-edge xhci_hcd 49: 826 91 920 257 IR-PCI-MSI 49152-edge snd_hda_intel 50: 363127 229106 850576 196544 IR-PCI-MSI 1048576-edge iwlwifi NMI: 2190 2399 2221 1874 Non-maskable interrupts LOC: 8199446 7602675 7137979 4973130 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts PMI: 2190 2399 2221 1874 Performance monitoring interrupts IWI: 0 1 1 0 IRQ work interrupts RTR: 3 0 0 0 APIC ICR read retries RES: 1117932 1200561 1398843 873543 Rescheduling interrupts CAL: 145275 153343 122202 118672 Function call interrupts TLB: 30552 30936 31487 32651 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 71 71 71 71 Machine check polls ERR: 15 MIS: 0 [GOOD] CPU0 CPU1 CPU2 CPU3 0: 60 0 0 0 IR-IO-APIC-edge timer 1: 73 26 135 54 IR-IO-APIC-edge i8042 3: 16 17 49 20 IR-IO-APIC-fasteoi AudioDSP, dw_dmac 6: 0 0 0 0 IR-IO-APIC-fasteoi dw_dmac 7: 2662 3072 12307 5419 IR-IO-APIC-fasteoi INT3432:00, INT3433:00 8: 0 0 1 0 IR-IO-APIC-edge rtc0 9: 265 48 280 85 IR-IO-APIC-fasteoi acpi 12: 20 5 61 2 IR-IO-APIC-edge i8042 37: 0 0 0 0 IR-IO-APIC 37-fasteoi rt286 39: 415 74 480 116 IR-IO-APIC 39-fasteoi DLL0665:01 40: 0 0 0 0 DMAR-MSI 0-edge dmar0 41: 0 0 0 0 DMAR-MSI 1-edge dmar1 42: 0 0 0 0 IR-PCI-MSI 458752-edge PCIe PME 43: 0 0 0 0 IR-PCI-MSI 464896-edge PCIe PME 44: 1007 402 696 280 IR-PCI-MSI 32768-edge i915 45: 4 1 20 0 IR-PCI-MSI 360448-edge mei_me 46: 19 1 10 0 IR-PCI-MSI 524288-edge rtsx_pci 47: 12101 9057 14481 30320 IR-PCI-MSI 512000-edge 0000:00:1f.2 48: 64 29 126 27 IR-PCI-MSI 327680-edge xhci_hcd 49: 635 21 1179 269 IR-PCI-MSI 49152-edge snd_hda_intel 50: 147 60 164 222 IR-PCI-MSI 1048576-edge iwlwifi NMI: 16 12 18 11 Non-maskable interrupts LOC: 21542 28287 23149 17203 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts PMI: 16 12 18 11 Performance monitoring interrupts IWI: 0 0 1 0 IRQ work interrupts RTR: 3 0 0 0 APIC ICR read retries RES: 5425 8358 6069 5476 Rescheduling interrupts CAL: 308 297 340 293 Function call interrupts TLB: 424 422 432 437 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 2 2 2 2 Machine check polls ERR: 0 MIS: 0 -- Matt Fleming, Intel Open Source Technology Center [-- Attachment #2: dmesg.bad --] [-- Type: text/plain, Size: 75244 bytes --] [ 0.000000] microcode: CPU0 microcode updated early to revision 0x18, date = 2014-12-05 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0+ (matt-ZqTwcBeJ+wsBof6jY8KHXm7IUlhRatedral2JQCrhuEAvxtiuMwx3w@public.gmane.org) (gcc version 4.9.2 20150212 (Red Hat 4.9.2-6) (GCC) ) #61 SMP Mon Jul 27 15:49:20 BST 2015 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.0.0+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rd.luks.uuid=luks-26312b50-d793-4686-a576-28b32bee5a21 LANG=en_GB.UTF-8 acpi.debug_level=0x00002425 acpi.debug_layer=0xe [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c6443fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c6444000-0x00000000c68e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c68e3000-0x00000000dadbefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dadbf000-0x00000000dae7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae80000-0x00000000daeacfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000daead000-0x00000000db7f8fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db7f9000-0x00000000dbafdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbafe000-0x00000000dbafefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xc4a7d018-0xc4a8d057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c4a7d017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c4a7d018-0x00000000c4a8d057] usable [ 0.000000] reserve setup_data: [mem 0x00000000c4a8d058-0x00000000c6443fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c6444000-0x00000000c68e2fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c68e3000-0x00000000dadbefff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dadbf000-0x00000000dae7ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dae80000-0x00000000daeacfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000daead000-0x00000000db7f8fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000db7f9000-0x00000000dbafdfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dbafe000-0x00000000dbafefff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dd000000-0x00000000df7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021e7fffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xdae89000 ACPI 2.0=0xdae89000 SMBIOS=0xf0000 [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. XPS 13 9343/0F5KF3, BIOS A00 11/04/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21e800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FF0000000 write-back [ 0.000000] 2 base 0210000000 mask 7FF8000000 write-back [ 0.000000] 3 base 0218000000 mask 7FFC000000 write-back [ 0.000000] 4 base 021C000000 mask 7FFE000000 write-back [ 0.000000] 5 base 021E000000 mask 7FFF800000 write-back [ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 7 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 8 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 9 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdbaff max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02688000, 0x02688fff] PGTABLE [ 0.000000] BRK [0x02689000, 0x02689fff] PGTABLE [ 0.000000] BRK [0x0268a000, 0x0268afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x21e600000-0x21e7fffff] [ 0.000000] [mem 0x21e600000-0x21e7fffff] page 2M [ 0.000000] BRK [0x0268b000, 0x0268bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21e5fffff] [ 0.000000] [mem 0x200000000-0x21e5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff] [ 0.000000] [mem 0x1e0000000-0x1ffffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc6443fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xc63fffff] page 2M [ 0.000000] [mem 0xc6400000-0xc6443fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xc68e3000-0xdadbefff] [ 0.000000] [mem 0xc68e3000-0xc69fffff] page 4k [ 0.000000] [mem 0xc6a00000-0xdabfffff] page 2M [ 0.000000] [mem 0xdac00000-0xdadbefff] page 4k [ 0.000000] BRK [0x0268c000, 0x0268cfff] PGTABLE [ 0.000000] BRK [0x0268d000, 0x0268dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdbafe000-0xdbafefff] [ 0.000000] [mem 0xdbafe000-0xdbafefff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff] [ 0.000000] [mem 0x100000000-0x1dfffffff] page 1G [ 0.000000] RAMDISK: [mem 0x3ee0e000-0x3fffafff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DAE89000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000DAE890C0 000104 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DAE9C640 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DAE89258 0133E2 (v02 DELL CBX3 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DB7F6F80 000040 [ 0.000000] ACPI: APIC 0x00000000DAE9C750 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DAE9C7D8 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DAE9C820 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DAE9C8C0 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DAE9C900 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DAE9C938 000455 (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000DAE9CD90 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000DAE9CDD8 0004A7 (v02 Intel_ Tpm2Tabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAE9D280 00004B (v02 MeSsdt MeSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: TPM2 0x00000000DAE9D2D0 000034 (v03 00000000 00000000) [ 0.000000] ACPI: LPIT 0x00000000DAE9D308 000094 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000DAE9D3A0 002402 (v02 AcpiRe Ult0Rtd3 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAE9F7A8 000CDB (v02 Ther_R Ther_Rvp 00001000 INTL 20120913) [ 0.000000] ACPI: ASF! 0x00000000DAEA0488 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000DAEA0528 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA0A48 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA15C0 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA1788 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913) [ 0.000000] ACPI: PCCT 0x00000000DAEA1B30 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA1BA0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA2668 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA6818 004646 (v01 DptfTa DptfTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SLIC 0x00000000DAEAAE60 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: MSDM 0x00000000DAEAAFD8 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: DMAR 0x00000000DAEAB030 0000F0 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: CSRT 0x00000000DAEAB120 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: BGRT 0x00000000DAEAB1E8 000038 (v00 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21e7e9000-0x21e7fcfff] [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215e00000-ffff88021ddfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021e7fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c6443fff] [ 0.000000] node 0: [mem 0x00000000c68e3000-0x00000000dadbefff] [ 0.000000] node 0: [mem 0x00000000dbafe000-0x00000000dbafefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021e7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e7fffff] [ 0.000000] On node 0 totalpages: 2068669 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13925 pages used for memmap [ 0.000000] DMA32 zone: 891169 pages, LIFO batch:31 [ 0.000000] Normal zone: 18336 pages used for memmap [ 0.000000] Normal zone: 1173504 pages, LIFO batch:31 [ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED [ 0.000000] Reserving Intel graphics stolen memory at 0xdd800000-0xdf7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] low level lint[0xe5]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc4a7d000-0xc4a7dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc4a8d000-0xc4a8dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc6444000-0xc68e2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdadbf000-0xdae7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae80000-0xdaeacfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaead000-0xdb7f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb7f9000-0xdbafdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbaff000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88021e400000 s97048 r8192 d29928 u524288 [ 0.000000] pcpu-alloc: s97048 r8192 d29928 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2036323 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.0.0+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rd.luks.uuid=luks-26312b50-d793-4686-a576-28b32bee5a21 LANG=en_GB.UTF-8 acpi.debug_level=0x00002425 acpi.debug_layer=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] Memory: 7680856K/8274676K available (11763K kernel code, 1718K rwdata, 4900K rodata, 1680K init, 1192K bss, 593820K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:728 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] tsc: Detected 2594.178 MHz processor [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.35 BogoMIPS (lpj=2594178) [ 0.000027] pid_max: default: 32768 minimum: 301 [ 0.000032] ACPI: Core revision 20150410 [ 0.025925] ACPI: All ACPI Tables successfully acquired [ 0.027283] hwacpi-0107 hw_set_mode : Attempting to enable ACPI mode [ 0.027908] Security Framework initialized [ 0.027915] SELinux: Initializing. [ 0.027921] SELinux: Starting in permissive mode [ 0.028325] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.029603] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.030152] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.030162] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.030329] Initializing cgroup subsys blkio [ 0.030332] Initializing cgroup subsys memory [ 0.030339] Initializing cgroup subsys devices [ 0.030342] Initializing cgroup subsys freezer [ 0.030345] Initializing cgroup subsys net_cls [ 0.030348] Initializing cgroup subsys perf_event [ 0.030350] Initializing cgroup subsys net_prio [ 0.030353] Initializing cgroup subsys hugetlb [ 0.030375] CPU: Physical Processor ID: 0 [ 0.030377] CPU: Processor Core ID: 0 [ 0.030382] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.030384] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.031268] mce: CPU supports 7 MCE banks [ 0.031279] CPU0: Thermal monitoring enabled (TM1) [ 0.031286] process: using mwait in idle threads [ 0.031291] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.031293] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.031663] Freeing SMP alternatives memory: 36K (ffffffff82553000 - ffffffff8255c000) [ 0.041325] ftrace: allocating 40210 entries in 158 pages [ 0.055423] dmar: Host address width 39 [ 0.055428] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.055437] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.055441] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.055446] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.055450] dmar: RMRR base: 0x000000db9e5000 end: 0x000000db9f3fff [ 0.055452] dmar: RMRR base: 0x000000dd000000 end: 0x000000df7fffff [ 0.055454] dmar: ANDD device: 1 name: \_SB.PCI0.SDMA [ 0.055456] dmar: ANDD device: 3 name: \_SB.PCI0.ADSP [ 0.055459] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.055461] HPET id 0 under DRHD base 0xfed91000 [ 0.055819] Your BIOS is broken and requested that x2apic be disabled. This will slightly decrease performance. Use 'intremap=no_x2apic_optout' to override BIOS request. [ 0.055834] Enabled IRQ remapping in xapic mode [ 0.055836] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.056452] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066466] TSC deadline timer enabled [ 0.066468] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (fam: 06, model: 3d, stepping: 04) [ 0.066491] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver. [ 0.066508] ... version: 3 [ 0.066510] ... bit width: 48 [ 0.066512] ... generic registers: 4 [ 0.066514] ... value mask: 0000ffffffffffff [ 0.066516] ... max period: 0000ffffffffffff [ 0.066518] ... fixed-purpose events: 3 [ 0.066519] ... event mask: 000000070000000f [ 0.067338] x86: Booting SMP configuration: [ 0.067341] .... node #0, CPUs: #1 [ 0.079102] microcode: CPU1 microcode updated early to revision 0x18, date = 2014-12-05 [ 0.082119] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.082185] #2 #3 [ 0.110524] x86: Booted up 1 node, 4 CPUs [ 0.110529] smpboot: Total of 4 processors activated (20753.42 BogoMIPS) [ 0.114016] devtmpfs: initialized [ 0.115592] PM: Registering ACPI NVS region [mem 0xdaead000-0xdb7f8fff] (9748480 bytes) [ 0.115729] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.115789] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.115794] pinctrl core: initialized pinctrl subsystem [ 0.115894] NET: Registered protocol family 16 [ 0.118862] cpuidle: using governor menu [ 0.118937] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.118941] ACPI: bus type PCI registered [ 0.118943] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.118992] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.118996] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.119065] PCI: Using configuration type 1 for base access [ 0.119072] dmi type 0xB1 record - unknown flag [ 0.124144] ACPI: Added _OSI(Module Device) [ 0.124147] ACPI: Added _OSI(Processor Device) [ 0.124149] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.124152] ACPI: Added _OSI(Processor Aggregator Device) [ 0.126471] Initializing General Purpose Events (GPEs): [ 0.126515] Initialized GPE 00 to 7F [_GPE] 16 regs on interrupt 0x9 (SCI) [ 0.126598] evxface-0664 install_fixed_event_ha: Enabled fixed event GlobalLock (1), Handler=ffffffff814dc413 [ 0.128806] Initializing Region \PNVA [ 0.129059] Initializing Region \GNVS [ 0.129335] Initializing Region \RCRB [ 0.129356] Initializing Region \_SB_.PCI0.LPCB.LPC_ [ 0.130024] Executing Method \_SB_.PCI0.SAT0._REG [ 0.130468] ACPI: Executed 17 blocks of module-level executable AML code [ 0.130861] Initializing Region \_PR_.PNVS [ 0.130877] Initializing Region \_PR_.IO_D [ 0.130895] Initializing Region \_PR_.IO_P [ 0.131770] Initializing Region \_SB_.PCI0.HBUS [ 0.131795] Initializing Region \_SB_.PCI0.B0D3.RPCS [ 0.131810] Initializing Region \SANV [ 0.131823] Initializing Region \_SB_.PCI0.B0D3.RPCZ [ 0.131835] Initializing Region \_SB_.PCI0.GFX0.PCS_ [ 0.131858] Initializing BufferField \_SB_.PCI0.GFX0.IVD6 [ 0.131868] Initializing BufferField \_SB_.PCI0.GFX0.IVD7 [ 0.131876] Initializing BufferField \_SB_.PCI0.GFX0.IVD8 [ 0.131883] Initializing BufferField \_SB_.PCI0.GFX0.VDP8 [ 0.131893] Initializing Region \_SB_.PCI0.GFX0.IGDP [ 0.131903] Initializing Region \_SB_.PCI0.GFX0.IGDM [ 0.131983] Initializing Region \_SB_.PCI0.B0D4.MBAR [ 0.132159] Initializing Region \_SB_.PCI0.PEG0.PEGP.PCIS [ 0.132167] Initializing Region \_SB_.PCI0.PEG0.PEGR [ 0.132197] Initializing Region \_SB_.PCI0.PEG1.PEGP.PCIS [ 0.132205] Initializing Region \_SB_.PCI0.PEG1.PEGR [ 0.132233] Initializing Region \_SB_.PCI0.PEG2.PEGP.PCIS [ 0.132241] Initializing Region \_SB_.PCI0.PEG2.PEGR [ 0.132269] Initializing Region \_SB_.PCI0.RP01.PXCS [ 0.132291] Initializing Region \_SB_.PCI0.RP02.PXCS [ 0.132308] Initializing Region \_SB_.PCI0.RP02.PXSX.PCCX [ 0.132317] Initializing Region \_SB_.PCI0.RP03.PXCS [ 0.132333] Initializing Region \_SB_.PCI0.RP03.PXSX.PCCX [ 0.132342] Initializing Region \_SB_.PCI0.RP04.PXCS [ 0.132359] Initializing Region \_SB_.PCI0.RP04.PXSX.PCCX [ 0.132373] Initializing Region \_SB_.PCI0.RP05.PXCS [ 0.132391] Initializing Region \_SB_.PCI0.RP06.PXCS [ 0.132407] Initializing Region \_SB_.PCI0.RP06.PXSX.PCCX [ 0.132417] Initializing Region \_SB_.PCI0.RP07.PXCS [ 0.132433] Initializing Region \_SB_.PCI0.RP07.PXSX.PCCX [ 0.132441] Initializing Region \_SB_.PCI0.RP08.PXCS [ 0.132457] Initializing Region \_SB_.PCI0.RP08.PXSX.PCCX [ 0.132466] Initializing Region \_SB_.PCI0.LPCB.SMIE [ 0.132480] Initializing Region \_SB_.PCI0.LPCB.SLPR [ 0.132492] Initializing Region \_SB_.PCI0.LPCB.CPSB [ 0.132506] Initializing Region \_SB_.PCI0.LPCB.LPCR [ 0.132556] Initializing Region \_SB_.PCI0.LPCB.ECDV.ECOR [ 0.132630] Initializing Region \_SB_.PCI0.GLAN.GLBA [ 0.132639] Initializing Region \_SB_.PCI0.EHC1.PWCS [ 0.132646] Initializing Region \_SB_.PCI0.EHC1.PWKE [ 0.132663] Initializing Region \_SB_.PCI0.EHC2.PWCS [ 0.132670] Initializing Region \_SB_.PCI0.EHC2.PWKE [ 0.132684] Initializing Region \_SB_.PCI0.XHC_.XPRT [ 0.132694] Initializing Region \_SB_.PCI0.XHC_.XHCP [ 0.132719] Initializing Region \_SB_.PCI0.XHC_.PWCS [ 0.133024] Initializing BufferField \_SB_.PCI0.GPI0.BMIN [ 0.133033] Initializing BufferField \_SB_.PCI0.GPI0.BMAX [ 0.133118] Initializing Region \_SB_.PCI0.HDEF.HDAR [ 0.133171] Initializing BufferField \_SB_.PCI0.ADSP.B0VL [ 0.133179] Initializing BufferField \_SB_.PCI0.ADSP.B1VL [ 0.133187] Initializing BufferField \_SB_.PCI0.ADSP.IRQN [ 0.133211] Initializing BufferField \_SB_.PCI0.SAT0.PIO0 [ 0.133218] Initializing BufferField \_SB_.PCI0.SAT0.DMA0 [ 0.133226] Initializing BufferField \_SB_.PCI0.SAT0.PIO1 [ 0.133234] Initializing BufferField \_SB_.PCI0.SAT0.DMA1 [ 0.133242] Initializing BufferField \_SB_.PCI0.SAT0.CHNF [ 0.133252] Initializing Region \_SB_.PCI0.SBUS.SMBP [ 0.133260] Initializing Region \_SB_.PCI0.SBUS.SMPB [ 0.133267] Initializing Region \_SB_.PCI0.SBUS.SMBI [ 0.133295] Initializing Region \_SB_.PCI0.MCHP [ 0.133351] Initializing Region \_SB_.PCI0.TPCH.PCHT [ 0.133973] Initializing Region \_SB_.RTCO [ 0.133989] Initializing Region \_SB_.TPMI.SMIP [ 0.133996] Initializing Region \_SB_.TPMI.FHCI [ 0.134004] Initializing Region \_SB_.TPMI.TNVS [ 0.134470] Initializing Region \EXBU [ 0.134479] Initializing Region \DEGA [ 0.134527] Initializing Region \PMIO [ 0.134564] Initializing Region \LGPE [ 0.134592] Initializing Region \GPR_ [ 0.134633] Initializing Region \GPRL [ 0.134665] Initializing Region \PRT0 [ 0.134672] Initializing Region \SPRT [ 0.134683] Initializing Region \USBD [ 0.134690] Initializing Region \UBLK [ 0.134698] Initializing Region \MBAR [ 0.134724] Initializing Region \IO_H [ 0.134794] Initializing Region \ABNV [ 0.134872] Initializing Region \MENV [ 0.134987] Executing Method \_SB_._STA [ 0.134992] Executing Method \_SB_._INI [ 0.134998] Executing Method \_SB_.PCI0._STA [ 0.135002] Executing Method \_SB_.PCI0._INI [ 0.136326] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.137989] Executing Method \_SB_.PCI0.B0D3._STA [ 0.138014] Executing Method \_SB_.PCI0.B0D3._INI [ 0.138047] Executing Method \_SB_.PCI0.PEG0._STA [ 0.138051] Executing Method \_SB_.PCI0.PEG0._INI [ 0.138081] Executing Method \_SB_.PCI0.PEG1._STA [ 0.138084] Executing Method \_SB_.PCI0.PEG1._INI [ 0.138113] Executing Method \_SB_.PCI0.PEG2._STA [ 0.138116] Executing Method \_SB_.PCI0.PEG2._INI [ 0.138144] Executing Method \_SB_.PCI0.RP01._STA [ 0.138148] Executing Method \_SB_.PCI0.RP01._INI [ 0.138186] Executing Method \_SB_.PCI0.RP02._STA [ 0.138189] Executing Method \_SB_.PCI0.RP02._INI [ 0.138230] Executing Method \_SB_.PCI0.RP03._STA [ 0.138234] Executing Method \_SB_.PCI0.RP03._INI [ 0.138271] Executing Method \_SB_.PCI0.RP04._STA [ 0.138274] Executing Method \_SB_.PCI0.RP04._INI [ 0.138312] Executing Method \_SB_.PCI0.RP05._STA [ 0.138316] Executing Method \_SB_.PCI0.RP05._INI [ 0.138352] Executing Method \_SB_.PCI0.RP06._STA [ 0.138356] Executing Method \_SB_.PCI0.RP06._INI [ 0.138393] Executing Method \_SB_.PCI0.RP07._STA [ 0.138396] Executing Method \_SB_.PCI0.RP07._INI [ 0.138433] Executing Method \_SB_.PCI0.RP08._STA [ 0.138436] Executing Method \_SB_.PCI0.RP08._INI [ 0.138473] Executing Method \_SB_.PCI0.XHC_._STA [ 0.138476] Executing Method \_SB_.PCI0.XHC_._INI [ 0.138480] Executing Method \_SB_.PCI0.XHC_.RHUB._STA [ 0.138484] Executing Method \_SB_.PCI0.XHC_.RHUB._INI [ 0.138496] Executing Method \_SB_.PCI0.I2C0._STA [ 0.138525] Executing Method \_SB_.PCI0.I2C0._INI [ 0.138529] Executing Method \_SB_.PCI0.I2C0.ACD0._STA [ 0.138576] Executing Method \_SB_.PCI0.I2C0.ACD0._INI [ 0.138613] Executing Method \_SB_.PCI0.I2C0.ACD1._STA [ 0.138641] Executing Method \_SB_.PCI0.I2C0.ACD2._STA [ 0.138678] Executing Method \_SB_.PCI0.I2C0.ACD3._STA [ 0.138706] Executing Method \_SB_.PCI0.ADSP._STA [ 0.138739] Executing Method \_SB_.PCI0.ADSP._INI [ 0.139317] ACPI: Dynamic OEM Table Load: [ 0.139325] ACPI: SSDT 0xFFFF880214249C00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.140192] ACPI: Dynamic OEM Table Load: [ 0.140198] ACPI: SSDT 0xFFFF880214205000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.141122] ACPI: Dynamic OEM Table Load: [ 0.141129] ACPI: SSDT 0xFFFF880214292C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.142716] ACPI : EC: EC started [ 0.142752] Executing Method \_SB_.PCI0.LPCB.ECDV._REG [ 0.150831] ACPI: Interpreter enabled [ 0.150842] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580) [ 0.150849] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580) [ 0.150863] ACPI: (supports S0 S3 S4 S5) [ 0.150866] ACPI: Using IOAPIC for interrupt routing [ 0.150894] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.152686] ACPI: Power Resource [PG00] (on) [ 0.153075] ACPI: Power Resource [PG01] (on) [ 0.153444] ACPI: Power Resource [PG02] (on) [ 0.153970] ACPI: Power Resource [PXP] (on) [ 0.155375] ACPI: Power Resource [PXP] (on) [ 0.159252] ACPI: Power Resource [PX05] (on) [ 0.160125] ACPI: Power Resource [PAUD] (on) [ 0.180832] ACPI: Power Resource [PXTC] (off) [ 0.182189] ACPI: Power Resource [P3PR] (off) [ 0.187410] ACPI: Power Resource [FN00] (off) [ 0.187476] ACPI: Power Resource [FN01] (off) [ 0.187538] ACPI: Power Resource [FN02] (off) [ 0.187601] ACPI: Power Resource [FN03] (off) [ 0.187665] ACPI: Power Resource [FN04] (off) [ 0.188489] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.188495] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.189077] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.189081] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.189502] PCI host bridge to bus 0000:00 [ 0.189505] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.189508] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.189510] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.189513] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.189516] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.189520] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.189523] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.189526] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.189529] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.189533] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.189536] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.189539] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.189542] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window] [ 0.189550] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.189633] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.189640] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit] [ 0.189646] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.189649] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.189729] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.189734] pci 0000:00:03.0: reg 0x10: [mem 0xf7218000-0xf721bfff 64bit] [ 0.189814] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000 [ 0.189822] pci 0000:00:04.0: reg 0x10: [mem 0xf7210000-0xf7217fff 64bit] [ 0.189916] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.189929] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit] [ 0.189974] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.190032] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.190059] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.190075] pci 0000:00:16.0: reg 0x10: [mem 0xf7221000-0xf722101f 64bit] [ 0.190131] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.190222] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.190271] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.190372] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.190398] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.190447] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.190540] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.190572] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.190733] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.190744] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.190749] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.190754] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.190760] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.190765] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.190770] pci 0000:00:1f.2: reg 0x24: [mem 0xf721e000-0xf721e7ff] [ 0.190796] pci 0000:00:1f.2: PME# supported from D3hot [ 0.190862] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.190874] pci 0000:00:1f.3: reg 0x10: [mem 0xf721d000-0xf721d0ff 64bit] [ 0.190889] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.190973] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.190997] pci 0000:00:1f.6: reg 0x10: [mem 0xf721c000-0xf721cfff 64bit] [ 0.191214] pci 0000:01:00.0: [10ec:5249] type 00 class 0xff0000 [ 0.191233] pci 0000:01:00.0: reg 0x10: [mem 0xf7100000-0xf7100fff] [ 0.191358] pci 0000:01:00.0: supports D1 D2 [ 0.191359] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.191397] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.194341] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.194346] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff] [ 0.194447] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 0.194491] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit] [ 0.194652] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.194696] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.197372] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.197378] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.202268] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202333] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202404] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202458] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202513] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202565] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202617] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202670] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.203909] ACPI: Enabled 3 GPEs in block 00 to 7F [ 0.203968] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930 [ 0.204095] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 0.204198] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.204201] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.204205] vgaarb: loaded [ 0.204207] vgaarb: bridge control possible 0000:00:02.0 [ 0.204263] SCSI subsystem initialized [ 0.204294] libata version 3.00 loaded. [ 0.204310] ACPI: bus type USB registered [ 0.204325] usbcore: registered new interface driver usbfs [ 0.204333] usbcore: registered new interface driver hub [ 0.204345] usbcore: registered new device driver usb [ 0.207396] media: Linux media interface: v0.10 [ 0.207406] Linux video capture interface: v2.00 [ 0.207576] wmi: Mapper loaded [ 0.207598] Advanced Linux Sound Architecture Driver Initialized. [ 0.207611] PCI: Using ACPI for IRQ routing [ 0.208759] PCI: pci_cache_line_size set to 64 bytes [ 0.208821] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.208823] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.208824] e820: reserve RAM buffer [mem 0xc4a7d018-0xc7ffffff] [ 0.208825] e820: reserve RAM buffer [mem 0xc6444000-0xc7ffffff] [ 0.208825] e820: reserve RAM buffer [mem 0xdadbf000-0xdbffffff] [ 0.208827] e820: reserve RAM buffer [mem 0xdbaff000-0xdbffffff] [ 0.208827] e820: reserve RAM buffer [mem 0x21e800000-0x21fffffff] [ 0.208906] Bluetooth: Core ver 2.20 [ 0.208912] NET: Registered protocol family 31 [ 0.208914] Bluetooth: HCI device and connection manager initialized [ 0.208917] Bluetooth: HCI socket layer initialized [ 0.208919] Bluetooth: L2CAP socket layer initialized [ 0.208924] Bluetooth: SCO socket layer initialized [ 0.208983] NetLabel: Initializing [ 0.208986] NetLabel: domain hash size = 128 [ 0.208988] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.209001] NetLabel: unlabeled traffic allowed by default [ 0.209044] cfg80211: Calling CRDA to update world regulatory domain [ 0.209096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.209101] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.211126] Switched to clocksource hpet [ 0.218168] pnp: PnP ACPI init [ 0.218366] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.218371] system 00:00: [io 0xffff] has been reserved [ 0.218373] system 00:00: [io 0xffff] has been reserved [ 0.218376] system 00:00: [io 0xffff] has been reserved [ 0.218378] system 00:00: [io 0x1800-0x18fe] could not be reserved [ 0.218381] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.218386] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.218423] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.218454] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.218457] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.218580] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.218594] pnp 00:04: Plug and Play ACPI device, IDs DLL0665 PNP0f13 (active) [ 0.218749] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.218752] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.218754] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.218757] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.218759] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.218762] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.218765] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.218767] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.218770] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.218774] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.218777] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.218779] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved [ 0.218782] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219184] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.219187] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.219189] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.219193] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.223177] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 0.223787] pnp: PnP ACPI: found 7 devices [ 0.229584] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.229603] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.229608] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff] [ 0.229615] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.229620] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.229627] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.229629] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.229630] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.229631] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.229632] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.229633] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.229634] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.229635] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.229636] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.229637] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.229638] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.229639] pci_bus 0000:00: resource 15 [mem 0xdf800000-0xfeafffff window] [ 0.229640] pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.229641] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff] [ 0.229675] NET: Registered protocol family 2 [ 0.229817] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.229928] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.230036] TCP: Hash tables configured (established 65536 bind 65536) [ 0.230063] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.230085] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.230134] NET: Registered protocol family 1 [ 0.230208] RPC: Registered named UNIX socket transport module. [ 0.230211] RPC: Registered udp transport module. [ 0.230212] RPC: Registered tcp transport module. [ 0.230214] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.230224] pci 0000:00:02.0: Video device with shadowed ROM [ 0.230423] PCI: CLS 64 bytes, default 64 [ 0.230454] Unpacking initramfs... [ 0.432325] Freeing initrd memory: 18356K (ffff88003ee0e000 - ffff88003fffb000) [ 0.432355] dmar: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0 [ 0.432361] dmar: ACPI device "INT3438:00" under DMAR at fed91000 as 00:13.0 [ 0.432370] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.432374] software IO TLB [mem 0xbe8fa000-0xc28fa000] (64MB) mapped at [ffff8800be8fa000-ffff8800c28f9fff] [ 0.432637] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x18 [ 0.432646] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x18 [ 0.432650] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x18 [ 0.432656] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x18 [ 0.432686] microcode: Microcode Update Driver: v2.00 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba [ 0.432924] AVX2 version of gcm_enc/dec engaged. [ 0.432927] AES CTR mode by8 optimization enabled [ 0.434392] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 0.435613] alg: No test for crc32 (crc32-pclmul) [ 0.435792] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.435803] Initialise system trusted keyring [ 0.435821] audit: initializing netlink subsys (disabled) [ 0.435829] audit: type=2000 audit(1438012293.415:1): initialized [ 0.436127] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.437084] zpool: loaded [ 0.437211] VFS: Disk quotas dquot_6.6.0 [ 0.437238] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.437526] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org). [ 0.437618] fuse init (API version 7.23) [ 0.437712] Key type big_key registered [ 0.437715] SELinux: Registering netfilter hooks [ 0.438527] alg: No test for stdrng (krng) [ 0.440323] NET: Registered protocol family 38 [ 0.440330] Key type asymmetric registered [ 0.440333] Asymmetric key parser 'x509' registered [ 0.440365] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.440395] io scheduler noop registered [ 0.440399] io scheduler deadline registered [ 0.440410] io scheduler cfq registered (default) [ 0.440763] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.440766] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.440778] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.440790] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.440793] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.440797] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.440801] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.440814] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.440825] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.440857] efifb: probing for efifb [ 0.440888] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 22500k, total 22500k [ 0.440892] efifb: mode is 3200x1800x32, linelength=12800, pages=1 [ 0.440894] efifb: scrolling: redraw [ 0.440896] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.449338] Console: switching to colour frame buffer device 400x112 [ 0.457312] fb0: EFI VGA frame buffer device [ 0.457331] intel_idle: MWAIT substates: 0x11142120 [ 0.457331] intel_idle: v0.4 model 0x3D [ 0.457332] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.458365] ACPI: AC Adapter [AC] (on-line) [ 0.458502] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.459166] ACPI: Lid Switch [LID0] [ 0.459214] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.459237] ACPI: Power Button [PBTN] [ 0.459269] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.459296] ACPI: Sleep Button [SBTN] [ 0.459331] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.459351] ACPI: Power Button [PWRF] [ 0.459371] evxface-0664 install_fixed_event_ha: Enabled fixed event PowerButton (2), Handler=ffffffff814c4e38 [ 0.460569] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.460587] ACPI: Thermal Zone [THM] (25 C) [ 0.463796] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.463815] ACPI: Thermal Zone [TZ00] (68 C) [ 0.466817] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.466836] ACPI: Thermal Zone [TZ01] (68 C) [ 0.483339] ACPI: Battery Slot [BAT0] (battery present) [ 0.483411] GHES: HEST is not enabled! [ 0.483472] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.483924] Non-volatile memory driver v1.3 [ 0.483965] Linux agpgart interface v0.103 [ 0.484031] [drm] Initialized drm 1.1.0 20060810 [ 0.484499] [drm] Memory usable by graphics device = 4096M [ 0.484518] checking generic (e0000000 15f9000) vs hw (e0000000 10000000) [ 0.484519] fb: switching to inteldrmfb from EFI VGA [ 0.484546] Console: switching to colour dummy device 80x25 [ 0.484630] [drm] Replacing VGA console driver [ 0.485078] [drm] ACPI BIOS requests an excessive sleep of 10000 ms, using 1500 ms instead [ 0.491249] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.491254] [drm] Driver supports precise vblank timestamp query. [ 0.491357] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.506276] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.516366] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 0.516396] fbcon: inteldrmfb (fb0) is primary device [ 0.516418] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0 [ 0.524522] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 0.524637] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 46 [ 0.527920] ahci 0000:00:1f.2: version 3.0 [ 0.528058] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.538391] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode [ 0.538393] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 0.538806] scsi host0: ahci [ 0.539037] scsi host1: ahci [ 0.539146] scsi host2: ahci [ 0.539233] scsi host3: ahci [ 0.539262] ata1: DUMMY [ 0.539263] ata2: DUMMY [ 0.539263] ata3: DUMMY [ 0.539264] ata4: SATA max UDMA/133 abar m2048@0xf721e000 port 0xf721e280 irq 47 [ 0.539344] libphy: Fixed MDIO Bus: probed [ 0.539345] tun: Universal TUN/TAP device driver, 1.6 [ 0.539346] tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org> [ 0.539411] usbcore: registered new interface driver r8152 [ 0.539418] usbcore: registered new interface driver cdc_ether [ 0.539588] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.539619] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.539684] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.539688] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.539785] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.539786] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.539787] usb usb1: Product: xHCI Host Controller [ 0.539788] usb usb1: Manufacturer: Linux 4.0.0+ xhci-hcd [ 0.539788] usb usb1: SerialNumber: 0000:00:14.0 [ 0.539886] hub 1-0:1.0: USB hub found [ 0.539900] hub 1-0:1.0: 11 ports detected [ 0.543726] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.543756] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.543775] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.543776] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.543777] usb usb2: Product: xHCI Host Controller [ 0.543777] usb usb2: Manufacturer: Linux 4.0.0+ xhci-hcd [ 0.543778] usb usb2: SerialNumber: 0000:00:14.0 [ 0.543844] hub 2-0:1.0: USB hub found [ 0.543849] hub 2-0:1.0: 4 ports detected [ 0.545200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.545204] ehci-pci: EHCI PCI platform driver [ 0.545212] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.545214] ohci-pci: OHCI PCI platform driver [ 0.545220] uhci_hcd: USB Universal Host Controller Interface driver [ 0.545245] usbcore: registered new interface driver usb-storage [ 0.545262] usbcore: registered new interface driver usbserial [ 0.545266] usbcore: registered new interface driver usbserial_generic [ 0.545269] usbserial: USB Serial support registered for generic [ 0.545274] usbcore: registered new interface driver ftdi_sio [ 0.545278] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.545305] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.545887] i8042: Warning: Keylock active [ 0.548227] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.548230] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.548300] mousedev: PS/2 mouse device common for all mice [ 0.548491] evxface-0664 install_fixed_event_ha: Enabled fixed event RealTimeClock (4), Handler=ffffffff81781a70 [ 0.548494] rtc_cmos 00:01: RTC can wake from S4 [ 0.548620] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.548653] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.548744] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254) [ 0.548745] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.548773] usbcore: registered new interface driver uvcvideo [ 0.548773] USB Video Class driver (1.1.1) [ 0.549856] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.551457] ACPI Warning: \_SB_.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20150410/nspredef-297) [ 0.551461] ACPI: Invalid package element [0]: got number, expecting [R] [ 0.585299] _ART package 0 is invalid, ignored [ 0.585299] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 0.605544] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 0.605582] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 0.605671] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 0.605690] iTCO_vendor_support: vendor-support=0 [ 0.605742] device-mapper: uevent: version 1.0.3 [ 0.605858] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org [ 0.605959] usbcore: registered new interface driver btusb [ 0.605970] Intel P-state driver initializing. [ 0.606125] sdhci: Secure Digital Host Controller Interface driver [ 0.606126] sdhci: Copyright(c) Pierre Ossman [ 0.609747] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 0.609760] EFI Variables Facility v0.08 2004-May-17 [ 0.612861] hidraw: raw HID events driver (C) Jiri Kosina [ 0.613211] usbcore: registered new interface driver usbhid [ 0.613212] usbhid: USB HID core driver [ 1.051811] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 1.216763] usb 1-3: No LPM exit latency info found, disabling LPM. [ 1.217993] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2a [ 1.217995] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.233715] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 1.233745] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2 [ 1.233747] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-2) [ 1.233780] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2 [ 1.233781] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.8.bseq [ 1.371953] usb 1-4: new full-speed USB device number 3 using xhci_hcd [ 1.434985] tsc: Refined TSC clocksource calibration: 2593.995 MHz [ 1.434987] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x256413873f2, max_idle_ns: 440795261455 ns [ 1.537920] usb 1-4: New USB device found, idVendor=04f3, idProduct=20d0 [ 1.537921] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 1.537922] usb 1-4: Product: Touchscreen [ 1.537923] usb 1-4: Manufacturer: ELAN [ 1.538095] usb 1-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.546130] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0001/input/input8 [ 1.546264] hid-multitouch 0003:04F3:20D0.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0 [ 1.600038] Console: switching to colour frame buffer device 400x112 [ 1.615017] i2c_designware INT3433:00: controller timed out [ 1.642496] i2c_designware INT3433:00: timeout in disabling adapter [ 1.642500] i2c_hid i2c-DLL0665:01: hid_descr_cmd failed [ 1.652393] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.653669] i915 0000:00:02.0: registered panic notifier [ 1.657621] input: Dell WMI hotkeys as /devices/virtual/input/input10 [ 1.659594] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 1.661087] drop_monitor: Initializing network drop monitor service [ 1.662378] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 1.663952] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.665299] Initializing XFRM netlink socket [ 1.666650] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops) [ 1.666726] NET: Registered protocol family 10 [ 1.666901] mip6: Mobile IPv6 [ 1.666906] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.672119] NET: Registered protocol family 17 [ 1.673485] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.674871] Ebtables v2.0 registered [ 1.676651] Loading compiled-in X.509 certificates [ 1.678662] Loaded X.509 cert 'Magrathea: Glacier signing key: fc047a540e21515ad039688bb8a1cf32a880e5c8' [ 1.680120] registered taskstats version 1 [ 1.682000] rtc_cmos 00:01: setting system clock to 2015-07-27 15:51:34 UTC (1438012294) [ 1.683519] ALSA device list: [ 1.684925] #0: HDA Intel HDMI at 0xf7218000 irq 49 [ 1.702062] usb 1-5: new high-speed USB device number 4 using xhci_hcd [ 1.892483] usb 1-5: New USB device found, idVendor=0bda, idProduct=5682 [ 1.894130] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.895492] usb 1-5: Product: Integrated_Webcam_HD [ 1.896871] usb 1-5: Manufacturer: CKFEH41F301030009340 [ 1.898226] usb 1-5: SerialNumber: 200901010001 [ 1.902918] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5682) [ 1.909242] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input11 [ 1.968309] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.972008] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.972011] ata4.00: ATA-9: SAMSUNG SSD PM851 M.2 2280 256GB, EXT25D0Q, max UDMA/133 [ 1.973710] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.975486] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.975522] ata4.00: configured for UDMA/133 [ 1.977107] scsi 3:0:0:0: Direct-Access ATA SAMSUNG SSD PM85 5D0Q PQ: 0 ANSI: 5 [ 1.978900] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.978921] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 1.981915] sd 3:0:0:0: [sda] Write Protect is off [ 1.983332] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.983339] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.987695] sda: sda1 sda2 sda3 [ 1.989829] sd 3:0:0:0: [sda] Attached SCSI disk [ 1.991608] Freeing unused kernel memory: 1680K (ffffffff823af000 - ffffffff82553000) [ 1.993274] Write protecting the kernel read-only data: 18432k [ 1.994928] Freeing unused kernel memory: 508K (ffff880001b81000 - ffff880001c00000) [ 1.996592] Freeing unused kernel memory: 1244K (ffff8800020c9000 - ffff880002200000) [ 2.002650] random: systemd urandom read with 29 bits of entropy available [ 2.004985] systemd[1]: systemd 216 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.006647] systemd[1]: Detected architecture 'x86-64'. [ 2.008206] systemd[1]: Running in initial RAM disk. [ 2.014693] systemd[1]: Set hostname to <mfleming-mobl1.ger.corp.intel.com>. [ 2.038356] systemd[1]: Expecting device dev-disk-by\x2duuid-AF27\x2d22C8.device... [ 2.041584] systemd[1]: Expecting device dev-mapper-fedora\x2dswap.device... [ 2.044757] systemd[1]: Expecting device dev-disk-by\x2duuid-e75ed791\x2dd3e4\x2d480d\x2daa9f\x2d499f34a15b23.device... [ 2.047949] systemd[1]: Expecting device dev-mapper-fedora\x2droot.device... [ 2.051141] systemd[1]: Starting Timers. [ 2.054265] systemd[1]: Reached target Timers. [ 2.055784] systemd[1]: Expecting device dev-disk-by\x2duuid-26312b50\x2dd793\x2d4686\x2da576\x2d28b32bee5a21.device... [ 2.058904] systemd[1]: Expecting device dev-mapper-luks\x2d26312b50\x2dd793\x2d4686\x2da576\x2d28b32bee5a21.device... [ 2.062025] systemd[1]: Starting -.slice. [ 2.068733] systemd[1]: Created slice -.slice. [ 2.070254] systemd[1]: Starting udev Control Socket. [ 2.073413] systemd[1]: Listening on udev Control Socket. [ 2.074935] systemd[1]: Starting udev Kernel Socket. [ 2.078041] systemd[1]: Listening on udev Kernel Socket. [ 2.079563] systemd[1]: Starting Journal Socket. [ 2.082673] systemd[1]: Listening on Journal Socket. [ 2.084168] systemd[1]: Starting System Slice. [ 2.087326] systemd[1]: Created slice System Slice. [ 2.088852] systemd[1]: Started dracut ask for additional cmdline parameters. [ 2.090388] systemd[1]: Starting dracut cmdline hook... [ 2.093775] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 2.097070] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.098659] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.102098] systemd[1]: Starting system-systemd\x2dcryptsetup.slice. [ 2.105677] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 2.107234] systemd[1]: Starting Journal Socket (/dev/log). [ 2.109025] systemd[1]: Starting Slices. [ 2.112524] systemd[1]: Reached target Slices. [ 2.114056] systemd[1]: Starting Setup Virtual Console... [ 2.117516] systemd[1]: Started Load Kernel Modules. [ 2.119050] systemd[1]: Starting Apply Kernel Variables... [ 2.133907] systemd[1]: Starting Swap. [ 2.137874] systemd[1]: Reached target Swap. [ 2.139535] systemd[1]: Starting Local File Systems. [ 2.143615] systemd[1]: Reached target Local File Systems. [ 2.147955] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 2.152059] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.155659] systemd[1]: Started Apply Kernel Variables. [ 2.160456] systemd[1]: Starting Sockets. [ 2.164560] systemd[1]: Reached target Sockets. [ 2.166545] systemd[1]: Starting Journal Service... [ 2.170929] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.179945] systemd[1]: Started Create Static Device Nodes in /dev. [ 2.187594] systemd[1]: Started Setup Virtual Console. [ 2.194946] systemd[1]: Started dracut cmdline hook. [ 2.196958] systemd[1]: Starting dracut pre-udev hook... [ 2.203746] systemd[1]: Started Journal Service. [ 2.435707] Switched to clocksource tsc [ 2.752647] i2c_designware INT3433:00: timeout in disabling adapter [ 3.364162] cfg80211: Calling CRDA to update world regulatory domain [ 6.518099] cfg80211: Calling CRDA to update world regulatory domain [ 9.672062] cfg80211: Calling CRDA to update world regulatory domain [ 12.195548] random: nonblocking pool is initialized [ 12.826017] cfg80211: Calling CRDA to update world regulatory domain [ 13.635457] psmouse serio1: Failed to deactivate mouse on isa0060/serio1 [ 14.110759] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 15.979827] cfg80211: Calling CRDA to update world regulatory domain [ 17.254897] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 17.509043] systemd-journald[291]: Received SIGTERM from PID 1 (systemd). [ 17.548446] audit: type=1404 audit(1438012310.355:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 17.565597] SELinux: 32768 avtab hash slots, 105179 rules. [ 17.576835] SELinux: 32768 avtab hash slots, 105179 rules. [ 17.596012] SELinux: 8 users, 103 roles, 4998 types, 294 bools, 1 sens, 1024 cats [ 17.596014] SELinux: 83 classes, 105179 rules [ 17.598883] SELinux: Permission audit_read in class capability2 not defined in policy. [ 17.600077] SELinux: Class binder not defined in policy. [ 17.601246] SELinux: the above unknown classes and permissions will be allowed [ 17.602424] SELinux: Completing initialization. [ 17.602425] SELinux: Setting up existing superblocks. [ 17.607981] audit: type=1403 audit(1438012310.415:3): policy loaded auid=4294967295 ses=4294967295 [ 17.612556] systemd[1]: Successfully loaded SELinux policy in 65.760ms. [ 17.624119] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 17.642871] systemd[1]: Relabelled /dev and /run in 13.795ms. [ 17.869285] EXT4-fs (dm-2): re-mounted. Opts: (null) [ 17.897255] systemd-journald[781]: Received request to flush runtime journal from PID 1 [ 18.200492] Intel(R) Wireless WiFi driver for Linux [ 18.202781] Copyright(c) 2003- 2015 Intel Corporation [ 18.202998] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 18.204283] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-13.ucode failed with error -2 [ 18.207012] sst-acpi INT3438:00: DesignWare DMA Controller, 8 channels [ 18.212887] iwlwifi 0000:02:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm [ 18.228318] (NULL device *): Direct firmware load for intel/IntcPP01.bin failed with error -2 [ 18.228320] (NULL device *): fw image intel/IntcPP01.bin not available(-2) [ 18.228922] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [ 18.258535] Adding 8126460k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:8126460k SSFS [ 18.302549] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 18.315282] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7 [ 18.331243] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 18.342020] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 18.344128] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 18.345945] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 18.409814] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 18.420331] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 18.427141] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 18.442653] cfg80211: Calling CRDA to update world regulatory domain [ 18.455127] cfg80211: World regulatory domain updated: [ 18.456705] cfg80211: DFS Master region: unset [ 18.456717] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 18.459866] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 18.461412] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 18.463120] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 18.464622] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 18.466151] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 18.467708] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 18.469180] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 18.470776] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 18.517384] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 18.528393] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x40000000 isr 0x00000001 ipcd 0x20011b93 imrx 0x7fff0000 [ 18.530053] (NULL device *): error: get version failed [ 18.831556] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x40000000 isr 0x00000001 ipcd 0x20011b93 imrx 0x7fff0000 [ 18.833569] (NULL device *): error: get stream info failed [ 18.835660] (NULL device *): error: failed to get stream info [ 18.848914] ------------[ cut here ]------------ [ 18.850431] kernel BUG at /home/matt/src/kernels/efi/mm/slub.c:3413! [ 18.851972] invalid opcode: 0000 [#1] SMP [ 18.853505] Modules linked in: iwlmvm iwlwifi snd_soc_sst_haswell_pcm(+) snd_soc_sst_ipc snd_soc_sst_dsp snd_soc_rt286(+) snd_soc_sst_acpi [ 18.855077] CPU: 0 PID: 830 Comm: systemd-udevd Not tainted 4.0.0+ #61 [ 18.856642] Hardware name: Dell Inc. XPS 13 9343/0F5KF3, BIOS A00 11/04/2014 [ 18.858204] task: ffff88020fc1b900 ti: ffff88020fc80000 task.ti: ffff88020fc80000 [ 18.859859] RIP: 0010:[<ffffffff81231102>] [<ffffffff81231102>] kfree+0x152/0x160 [ 18.861471] RSP: 0018:ffff88020fc83a98 EFLAGS: 00010246 [ 18.863044] RAX: 005ffc0000000000 RBX: ffff880212910000 RCX: 0000000000007dff [ 18.864640] RDX: 000077ff80000000 RSI: ffff880212910028 RDI: ffff880212910000 [ 18.866671] RBP: ffff88020fc83ab8 R08: 0000000000019c60 R09: ffffea00084a4400 [ 18.868270] R10: ffffffff816621ed R11: ffff8800d9cf5a20 R12: ffff88020fc83af0 [ 18.869804] R13: ffffffff816621ed R14: 0000000000000004 R15: ffff8800daaf1000 [ 18.871339] FS: 00007f273d54f880(0000) GS:ffff88021e400000(0000) knlGS:0000000000000000 [ 18.872885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 18.874419] CR2: 00007f273d3f3000 CR3: 000000020fc8f000 CR4: 00000000003407f0 [ 18.875949] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 18.877468] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 18.878969] Stack: [ 18.880464] ffff8800daaf1028 ffff8800daaf1000 ffff88020fc83af0 ffff8800d8911410 [ 18.881955] ffff88020fc83b38 ffffffff816621ed 0000000000000286 ffff8800d8911668 [ 18.883457] ffff880000000000 ffff8800d8911668 ffff8802131d8480 ffff8800daaf1000 [ 18.884934] Call Trace: [ 18.886429] [<ffffffff816621ed>] release_nodes+0x14d/0x260 [ 18.887920] [<ffffffff81662410>] devres_release_all+0x40/0x70 [ 18.889414] [<ffffffff8165dc98>] driver_probe_device+0xc8/0x4b0 [ 18.890913] [<ffffffff8165e15b>] __driver_attach+0x9b/0xa0 [ 18.892402] [<ffffffff8165e0c0>] ? __device_attach+0x40/0x40 [ 18.893888] [<ffffffff8165b8f3>] bus_for_each_dev+0x73/0xc0 [ 18.895374] [<ffffffff8165d6ae>] driver_attach+0x1e/0x20 [ 18.896857] [<ffffffff8165d260>] bus_add_driver+0x180/0x250 [ 18.898342] [<ffffffffa0062964>] ? ftrace_define_fields_hsw_device_config_req+0xc6/0xc6 [snd_soc_sst_haswell_pcm] [ 18.899858] [<ffffffff8165e954>] driver_register+0x64/0xf0 [ 18.901342] [<ffffffff8165fffa>] __platform_driver_register+0x4a/0x50 [ 18.902839] [<ffffffffa006297b>] hsw_pcm_driver_init+0x17/0x69c [snd_soc_sst_haswell_pcm] [ 18.904342] [<ffffffff81000318>] do_one_initcall+0xd8/0x210 [ 18.905840] [<ffffffff81214e02>] ? __vunmap+0xa2/0x100 [ 18.907328] [<ffffffff812325c9>] ? kmem_cache_alloc_trace+0x1a9/0x230 [ 18.908820] [<ffffffff81b6b624>] ? do_init_module+0x28/0x1cc [ 18.910334] [<ffffffff81b6b65d>] do_init_module+0x61/0x1cc [ 18.911838] [<ffffffff811631eb>] load_module+0x20cb/0x2540 [ 18.913313] [<ffffffff8115ead0>] ? store_uevent+0x70/0x70 [ 18.914779] [<ffffffff812562e0>] ? kernel_read+0x50/0x80 [ 18.916234] [<ffffffff81163886>] SyS_finit_module+0xa6/0xe0 [ 18.917684] [<ffffffff81b762ee>] system_call_fastpath+0x12/0x71 [ 18.919130] Code: 00 4d 8b 49 30 e9 35 ff ff ff 0f 1f 80 00 00 00 00 4c 89 d1 48 89 da 4c 89 ce e8 ea f9 ff ff e9 73 ff ff ff 0f 1f 44 00 00 0f 0b <0f> 0b 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 89 [ 18.920682] RIP [<ffffffff81231102>] kfree+0x152/0x160 [ 18.922160] RSP <ffff88020fc83a98> [ 18.923664] ---[ end trace 1fdbf340cd8718a0 ]--- [ 19.056710] i2c_designware INT3432:00: controller timed out [ 19.059155] rt286 i2c-INT343A:00: I2C error -110 [ 19.073730] rt286: probe of i2c-INT343A:00 failed with error -110 [ 198.267302] audit: type=1305 audit(1438008890.963:4): audit_pid=934 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 [ 198.582308] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 198.584423] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 199.593932] device virbr0-nic entered promiscuous mode [ 199.608470] virbr0: port 1(virbr0-nic) entered forwarding state [ 199.608480] virbr0: port 1(virbr0-nic) entered forwarding state [ 199.825141] virbr0: port 1(virbr0-nic) entered disabled state [ 205.479221] wlp2s0: authenticate with 7c:03:4c:71:c8:61 [ 205.482283] wlp2s0: send auth to 7c:03:4c:71:c8:61 (try 1/3) [ 205.484861] wlp2s0: authenticated [ 205.485990] wlp2s0: associate with 7c:03:4c:71:c8:61 (try 1/3) [ 205.491045] wlp2s0: RX AssocResp from 7c:03:4c:71:c8:61 (capab=0x411 status=0 aid=2) [ 205.491675] wlp2s0: associated [-- Attachment #3: dmesg.good --] [-- Type: text/plain, Size: 98794 bytes --] [ 0.000000] microcode: CPU0 microcode updated early to revision 0x18, date = 2014-12-05 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0+ (matt-ZqTwcBeJ+wsBof6jY8KHXm7IUlhRatedral2JQCrhuEAvxtiuMwx3w@public.gmane.org) (gcc version 4.9.2 20150212 (Red Hat 4.9.2-6) (GCC) ) #60 SMP Sun Jul 26 14:59:58 BST 2015 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.0.0+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rd.luks.uuid=luks-26312b50-d793-4686-a576-28b32bee5a21 LANG=en_GB.UTF-8 acpi.debug_level=0x00002425 acpi.debug_layer=0xe [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c6443fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c6444000-0x00000000c68e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c68e3000-0x00000000dadbefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dadbf000-0x00000000dae7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae80000-0x00000000daeacfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000daead000-0x00000000db7f8fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db7f9000-0x00000000dbafdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbafe000-0x00000000dbafefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xc4a7d018-0xc4a8d057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c4a7d017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c4a7d018-0x00000000c4a8d057] usable [ 0.000000] reserve setup_data: [mem 0x00000000c4a8d058-0x00000000c6443fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c6444000-0x00000000c68e2fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c68e3000-0x00000000dadbefff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dadbf000-0x00000000dae7ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dae80000-0x00000000daeacfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000daead000-0x00000000db7f8fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000db7f9000-0x00000000dbafdfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dbafe000-0x00000000dbafefff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dd000000-0x00000000df7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021e7fffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xdae89000 ACPI 2.0=0xdae89000 SMBIOS=0xf0000 [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. XPS 13 9343/0F5KF3, BIOS A00 11/04/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21e800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FF0000000 write-back [ 0.000000] 2 base 0210000000 mask 7FF8000000 write-back [ 0.000000] 3 base 0218000000 mask 7FFC000000 write-back [ 0.000000] 4 base 021C000000 mask 7FFE000000 write-back [ 0.000000] 5 base 021E000000 mask 7FFF800000 write-back [ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 7 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 8 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 9 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdbaff max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02688000, 0x02688fff] PGTABLE [ 0.000000] BRK [0x02689000, 0x02689fff] PGTABLE [ 0.000000] BRK [0x0268a000, 0x0268afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x21e600000-0x21e7fffff] [ 0.000000] [mem 0x21e600000-0x21e7fffff] page 2M [ 0.000000] BRK [0x0268b000, 0x0268bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21e5fffff] [ 0.000000] [mem 0x200000000-0x21e5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff] [ 0.000000] [mem 0x1e0000000-0x1ffffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc6443fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xc63fffff] page 2M [ 0.000000] [mem 0xc6400000-0xc6443fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xc68e3000-0xdadbefff] [ 0.000000] [mem 0xc68e3000-0xc69fffff] page 4k [ 0.000000] [mem 0xc6a00000-0xdabfffff] page 2M [ 0.000000] [mem 0xdac00000-0xdadbefff] page 4k [ 0.000000] BRK [0x0268c000, 0x0268cfff] PGTABLE [ 0.000000] BRK [0x0268d000, 0x0268dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdbafe000-0xdbafefff] [ 0.000000] [mem 0xdbafe000-0xdbafefff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff] [ 0.000000] [mem 0x100000000-0x1dfffffff] page 1G [ 0.000000] RAMDISK: [mem 0x3ee0d000-0x3fffafff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DAE89000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000DAE890C0 000104 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DAE9C640 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DAE89258 0133E2 (v02 DELL CBX3 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DB7F6F80 000040 [ 0.000000] ACPI: APIC 0x00000000DAE9C750 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DAE9C7D8 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DAE9C820 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DAE9C8C0 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DAE9C900 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DAE9C938 000455 (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000DAE9CD90 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000DAE9CDD8 0004A7 (v02 Intel_ Tpm2Tabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAE9D280 00004B (v02 MeSsdt MeSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: TPM2 0x00000000DAE9D2D0 000034 (v03 00000000 00000000) [ 0.000000] ACPI: LPIT 0x00000000DAE9D308 000094 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000DAE9D3A0 002402 (v02 AcpiRe Ult0Rtd3 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAE9F7A8 000CDB (v02 Ther_R Ther_Rvp 00001000 INTL 20120913) [ 0.000000] ACPI: ASF! 0x00000000DAEA0488 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000DAEA0528 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA0A48 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA15C0 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA1788 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913) [ 0.000000] ACPI: PCCT 0x00000000DAEA1B30 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA1BA0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA2668 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA6818 004646 (v01 DptfTa DptfTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SLIC 0x00000000DAEAAE60 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: MSDM 0x00000000DAEAAFD8 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: DMAR 0x00000000DAEAB030 0000F0 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: CSRT 0x00000000DAEAB120 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: BGRT 0x00000000DAEAB1E8 000038 (v00 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21e7e9000-0x21e7fcfff] [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215e00000-ffff88021ddfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021e7fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c6443fff] [ 0.000000] node 0: [mem 0x00000000c68e3000-0x00000000dadbefff] [ 0.000000] node 0: [mem 0x00000000dbafe000-0x00000000dbafefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021e7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e7fffff] [ 0.000000] On node 0 totalpages: 2068669 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13925 pages used for memmap [ 0.000000] DMA32 zone: 891169 pages, LIFO batch:31 [ 0.000000] Normal zone: 18336 pages used for memmap [ 0.000000] Normal zone: 1173504 pages, LIFO batch:31 [ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED [ 0.000000] Reserving Intel graphics stolen memory at 0xdd800000-0xdf7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x48]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc4a7d000-0xc4a7dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc4a8d000-0xc4a8dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc6444000-0xc68e2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdadbf000-0xdae7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae80000-0xdaeacfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaead000-0xdb7f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb7f9000-0xdbafdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbaff000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88021e400000 s97048 r8192 d29928 u524288 [ 0.000000] pcpu-alloc: s97048 r8192 d29928 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2036323 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.0.0+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rd.luks.uuid=luks-26312b50-d793-4686-a576-28b32bee5a21 LANG=en_GB.UTF-8 acpi.debug_level=0x00002425 acpi.debug_layer=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] Memory: 7680852K/8274676K available (11763K kernel code, 1718K rwdata, 4900K rodata, 1680K init, 1192K bss, 593824K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:728 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2594.150 MHz processor [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.30 BogoMIPS (lpj=2594150) [ 0.000027] pid_max: default: 32768 minimum: 301 [ 0.000032] ACPI: Core revision 20150410 [ 0.025826] ACPI: All ACPI Tables successfully acquired [ 0.026875] hwacpi-0107 hw_set_mode : Attempting to enable ACPI mode [ 0.027500] Security Framework initialized [ 0.027506] SELinux: Initializing. [ 0.027514] SELinux: Starting in permissive mode [ 0.027916] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.029174] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.029715] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.029725] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.029894] Initializing cgroup subsys blkio [ 0.029898] Initializing cgroup subsys memory [ 0.029904] Initializing cgroup subsys devices [ 0.029908] Initializing cgroup subsys freezer [ 0.029910] Initializing cgroup subsys net_cls [ 0.029913] Initializing cgroup subsys perf_event [ 0.029916] Initializing cgroup subsys net_prio [ 0.029918] Initializing cgroup subsys hugetlb [ 0.029940] CPU: Physical Processor ID: 0 [ 0.029942] CPU: Processor Core ID: 0 [ 0.029946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.029948] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.030832] mce: CPU supports 7 MCE banks [ 0.030844] CPU0: Thermal monitoring enabled (TM1) [ 0.030852] process: using mwait in idle threads [ 0.030856] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.030858] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.031227] Freeing SMP alternatives memory: 36K (ffffffff82553000 - ffffffff8255c000) [ 0.040872] ftrace: allocating 40204 entries in 158 pages [ 0.055016] dmar: Host address width 39 [ 0.055020] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.055029] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.055033] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.055039] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.055042] dmar: RMRR base: 0x000000db9e5000 end: 0x000000db9f3fff [ 0.055045] dmar: RMRR base: 0x000000dd000000 end: 0x000000df7fffff [ 0.055047] dmar: ANDD device: 1 name: \_SB.PCI0.SDMA [ 0.055049] dmar: ANDD device: 3 name: \_SB.PCI0.ADSP [ 0.055052] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.055054] HPET id 0 under DRHD base 0xfed91000 [ 0.055422] Your BIOS is broken and requested that x2apic be disabled. This will slightly decrease performance. Use 'intremap=no_x2apic_optout' to override BIOS request. [ 0.055438] Enabled IRQ remapping in xapic mode [ 0.055440] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.056068] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066081] TSC deadline timer enabled [ 0.066083] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (fam: 06, model: 3d, stepping: 04) [ 0.066107] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver. [ 0.066125] ... version: 3 [ 0.066127] ... bit width: 48 [ 0.066128] ... generic registers: 4 [ 0.066130] ... value mask: 0000ffffffffffff [ 0.066132] ... max period: 0000ffffffffffff [ 0.066134] ... fixed-purpose events: 3 [ 0.066136] ... event mask: 000000070000000f [ 0.066968] x86: Booting SMP configuration: [ 0.066971] .... node #0, CPUs: #1 [ 0.078735] microcode: CPU1 microcode updated early to revision 0x18, date = 2014-12-05 [ 0.081750] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.081816] #2 #3 [ 0.110158] x86: Booted up 1 node, 4 CPUs [ 0.110163] smpboot: Total of 4 processors activated (20753.20 BogoMIPS) [ 0.113712] devtmpfs: initialized [ 0.115292] PM: Registering ACPI NVS region [mem 0xdaead000-0xdb7f8fff] (9748480 bytes) [ 0.115430] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.115490] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.115494] pinctrl core: initialized pinctrl subsystem [ 0.115596] NET: Registered protocol family 16 [ 0.118575] cpuidle: using governor menu [ 0.118647] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.118652] ACPI: bus type PCI registered [ 0.118654] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.118701] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.118706] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.118775] PCI: Using configuration type 1 for base access [ 0.118782] dmi type 0xB1 record - unknown flag [ 0.123843] ACPI: Added _OSI(Module Device) [ 0.123846] ACPI: Added _OSI(Processor Device) [ 0.123848] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.123851] ACPI: Added _OSI(Processor Aggregator Device) [ 0.126117] Initializing General Purpose Events (GPEs): [ 0.126162] Initialized GPE 00 to 7F [_GPE] 16 regs on interrupt 0x9 (SCI) [ 0.126248] evxface-0664 install_fixed_event_ha: Enabled fixed event GlobalLock (1), Handler=ffffffff814dc413 [ 0.128455] Initializing Region \PNVA [ 0.128708] Initializing Region \GNVS [ 0.128984] Initializing Region \RCRB [ 0.129005] Initializing Region \_SB_.PCI0.LPCB.LPC_ [ 0.129670] Executing Method \_SB_.PCI0.SAT0._REG [ 0.130112] ACPI: Executed 17 blocks of module-level executable AML code [ 0.130506] Initializing Region \_PR_.PNVS [ 0.130523] Initializing Region \_PR_.IO_D [ 0.130538] Initializing Region \_PR_.IO_P [ 0.131408] Initializing Region \_SB_.PCI0.HBUS [ 0.131433] Initializing Region \_SB_.PCI0.B0D3.RPCS [ 0.131448] Initializing Region \SANV [ 0.131460] Initializing Region \_SB_.PCI0.B0D3.RPCZ [ 0.131473] Initializing Region \_SB_.PCI0.GFX0.PCS_ [ 0.131496] Initializing BufferField \_SB_.PCI0.GFX0.IVD6 [ 0.131505] Initializing BufferField \_SB_.PCI0.GFX0.IVD7 [ 0.131513] Initializing BufferField \_SB_.PCI0.GFX0.IVD8 [ 0.131521] Initializing BufferField \_SB_.PCI0.GFX0.VDP8 [ 0.131529] Initializing Region \_SB_.PCI0.GFX0.IGDP [ 0.131537] Initializing Region \_SB_.PCI0.GFX0.IGDM [ 0.131619] Initializing Region \_SB_.PCI0.B0D4.MBAR [ 0.131794] Initializing Region \_SB_.PCI0.PEG0.PEGP.PCIS [ 0.131803] Initializing Region \_SB_.PCI0.PEG0.PEGR [ 0.131833] Initializing Region \_SB_.PCI0.PEG1.PEGP.PCIS [ 0.131841] Initializing Region \_SB_.PCI0.PEG1.PEGR [ 0.131869] Initializing Region \_SB_.PCI0.PEG2.PEGP.PCIS [ 0.131877] Initializing Region \_SB_.PCI0.PEG2.PEGR [ 0.131906] Initializing Region \_SB_.PCI0.RP01.PXCS [ 0.131928] Initializing Region \_SB_.PCI0.RP02.PXCS [ 0.131945] Initializing Region \_SB_.PCI0.RP02.PXSX.PCCX [ 0.131954] Initializing Region \_SB_.PCI0.RP03.PXCS [ 0.131970] Initializing Region \_SB_.PCI0.RP03.PXSX.PCCX [ 0.131979] Initializing Region \_SB_.PCI0.RP04.PXCS [ 0.131996] Initializing Region \_SB_.PCI0.RP04.PXSX.PCCX [ 0.132009] Initializing Region \_SB_.PCI0.RP05.PXCS [ 0.132027] Initializing Region \_SB_.PCI0.RP06.PXCS [ 0.132044] Initializing Region \_SB_.PCI0.RP06.PXSX.PCCX [ 0.132053] Initializing Region \_SB_.PCI0.RP07.PXCS [ 0.132070] Initializing Region \_SB_.PCI0.RP07.PXSX.PCCX [ 0.132079] Initializing Region \_SB_.PCI0.RP08.PXCS [ 0.132095] Initializing Region \_SB_.PCI0.RP08.PXSX.PCCX [ 0.132104] Initializing Region \_SB_.PCI0.LPCB.SMIE [ 0.132117] Initializing Region \_SB_.PCI0.LPCB.SLPR [ 0.132129] Initializing Region \_SB_.PCI0.LPCB.CPSB [ 0.132143] Initializing Region \_SB_.PCI0.LPCB.LPCR [ 0.132193] Initializing Region \_SB_.PCI0.LPCB.ECDV.ECOR [ 0.132270] Initializing Region \_SB_.PCI0.GLAN.GLBA [ 0.132278] Initializing Region \_SB_.PCI0.EHC1.PWCS [ 0.132286] Initializing Region \_SB_.PCI0.EHC1.PWKE [ 0.132302] Initializing Region \_SB_.PCI0.EHC2.PWCS [ 0.132309] Initializing Region \_SB_.PCI0.EHC2.PWKE [ 0.132324] Initializing Region \_SB_.PCI0.XHC_.XPRT [ 0.132333] Initializing Region \_SB_.PCI0.XHC_.XHCP [ 0.132359] Initializing Region \_SB_.PCI0.XHC_.PWCS [ 0.132666] Initializing BufferField \_SB_.PCI0.GPI0.BMIN [ 0.132675] Initializing BufferField \_SB_.PCI0.GPI0.BMAX [ 0.132759] Initializing Region \_SB_.PCI0.HDEF.HDAR [ 0.132813] Initializing BufferField \_SB_.PCI0.ADSP.B0VL [ 0.132821] Initializing BufferField \_SB_.PCI0.ADSP.B1VL [ 0.132829] Initializing BufferField \_SB_.PCI0.ADSP.IRQN [ 0.132852] Initializing BufferField \_SB_.PCI0.SAT0.PIO0 [ 0.132860] Initializing BufferField \_SB_.PCI0.SAT0.DMA0 [ 0.132868] Initializing BufferField \_SB_.PCI0.SAT0.PIO1 [ 0.132876] Initializing BufferField \_SB_.PCI0.SAT0.DMA1 [ 0.132883] Initializing BufferField \_SB_.PCI0.SAT0.CHNF [ 0.132894] Initializing Region \_SB_.PCI0.SBUS.SMBP [ 0.132902] Initializing Region \_SB_.PCI0.SBUS.SMPB [ 0.132909] Initializing Region \_SB_.PCI0.SBUS.SMBI [ 0.132937] Initializing Region \_SB_.PCI0.MCHP [ 0.132994] Initializing Region \_SB_.PCI0.TPCH.PCHT [ 0.133615] Initializing Region \_SB_.RTCO [ 0.133630] Initializing Region \_SB_.TPMI.SMIP [ 0.133638] Initializing Region \_SB_.TPMI.FHCI [ 0.133645] Initializing Region \_SB_.TPMI.TNVS [ 0.134112] Initializing Region \EXBU [ 0.134121] Initializing Region \DEGA [ 0.134170] Initializing Region \PMIO [ 0.134207] Initializing Region \LGPE [ 0.134235] Initializing Region \GPR_ [ 0.134275] Initializing Region \GPRL [ 0.134307] Initializing Region \PRT0 [ 0.134314] Initializing Region \SPRT [ 0.134325] Initializing Region \USBD [ 0.134332] Initializing Region \UBLK [ 0.134340] Initializing Region \MBAR [ 0.134366] Initializing Region \IO_H [ 0.134438] Initializing Region \ABNV [ 0.134515] Initializing Region \MENV [ 0.134630] Executing Method \_SB_._STA [ 0.134634] Executing Method \_SB_._INI [ 0.134641] Executing Method \_SB_.PCI0._STA [ 0.134645] Executing Method \_SB_.PCI0._INI [ 0.135975] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.137603] Executing Method \_SB_.PCI0.B0D3._STA [ 0.137627] Executing Method \_SB_.PCI0.B0D3._INI [ 0.137661] Executing Method \_SB_.PCI0.PEG0._STA [ 0.137664] Executing Method \_SB_.PCI0.PEG0._INI [ 0.137694] Executing Method \_SB_.PCI0.PEG1._STA [ 0.137697] Executing Method \_SB_.PCI0.PEG1._INI [ 0.137726] Executing Method \_SB_.PCI0.PEG2._STA [ 0.137729] Executing Method \_SB_.PCI0.PEG2._INI [ 0.137758] Executing Method \_SB_.PCI0.RP01._STA [ 0.137761] Executing Method \_SB_.PCI0.RP01._INI [ 0.137800] Executing Method \_SB_.PCI0.RP02._STA [ 0.137803] Executing Method \_SB_.PCI0.RP02._INI [ 0.137844] Executing Method \_SB_.PCI0.RP03._STA [ 0.137847] Executing Method \_SB_.PCI0.RP03._INI [ 0.137884] Executing Method \_SB_.PCI0.RP04._STA [ 0.137888] Executing Method \_SB_.PCI0.RP04._INI [ 0.137926] Executing Method \_SB_.PCI0.RP05._STA [ 0.137929] Executing Method \_SB_.PCI0.RP05._INI [ 0.137966] Executing Method \_SB_.PCI0.RP06._STA [ 0.137969] Executing Method \_SB_.PCI0.RP06._INI [ 0.138006] Executing Method \_SB_.PCI0.RP07._STA [ 0.138009] Executing Method \_SB_.PCI0.RP07._INI [ 0.138046] Executing Method \_SB_.PCI0.RP08._STA [ 0.138049] Executing Method \_SB_.PCI0.RP08._INI [ 0.138086] Executing Method \_SB_.PCI0.XHC_._STA [ 0.138090] Executing Method \_SB_.PCI0.XHC_._INI [ 0.138094] Executing Method \_SB_.PCI0.XHC_.RHUB._STA [ 0.138097] Executing Method \_SB_.PCI0.XHC_.RHUB._INI [ 0.138110] Executing Method \_SB_.PCI0.I2C0._STA [ 0.138139] Executing Method \_SB_.PCI0.I2C0._INI [ 0.138142] Executing Method \_SB_.PCI0.I2C0.ACD0._STA [ 0.138190] Executing Method \_SB_.PCI0.I2C0.ACD0._INI [ 0.138227] Executing Method \_SB_.PCI0.I2C0.ACD1._STA [ 0.138255] Executing Method \_SB_.PCI0.I2C0.ACD2._STA [ 0.138291] Executing Method \_SB_.PCI0.I2C0.ACD3._STA [ 0.138319] Executing Method \_SB_.PCI0.ADSP._STA [ 0.138352] Executing Method \_SB_.PCI0.ADSP._INI [ 0.138931] ACPI: Dynamic OEM Table Load: [ 0.138938] ACPI: SSDT 0xFFFF880214249C00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.139805] ACPI: Dynamic OEM Table Load: [ 0.139812] ACPI: SSDT 0xFFFF880214205000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.140736] ACPI: Dynamic OEM Table Load: [ 0.140741] ACPI: SSDT 0xFFFF880214292C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.142328] ACPI : EC: EC started [ 0.142365] Executing Method \_SB_.PCI0.LPCB.ECDV._REG [ 0.151247] ACPI: Interpreter enabled [ 0.151256] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580) [ 0.151264] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580) [ 0.151278] ACPI: (supports S0 S3 S4 S5) [ 0.151281] ACPI: Using IOAPIC for interrupt routing [ 0.151309] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.153104] ACPI: Power Resource [PG00] (on) [ 0.153493] ACPI: Power Resource [PG01] (on) [ 0.153864] ACPI: Power Resource [PG02] (on) [ 0.154388] ACPI: Power Resource [PXP] (on) [ 0.155787] ACPI: Power Resource [PXP] (on) [ 0.159667] ACPI: Power Resource [PX05] (on) [ 0.160540] ACPI: Power Resource [PAUD] (on) [ 0.181212] ACPI: Power Resource [PXTC] (off) [ 0.182566] ACPI: Power Resource [P3PR] (off) [ 0.187744] ACPI: Power Resource [FN00] (off) [ 0.187809] ACPI: Power Resource [FN01] (off) [ 0.187873] ACPI: Power Resource [FN02] (off) [ 0.187935] ACPI: Power Resource [FN03] (off) [ 0.187999] ACPI: Power Resource [FN04] (off) [ 0.188825] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.188832] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.189416] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.189420] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.189842] PCI host bridge to bus 0000:00 [ 0.189846] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.189848] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.189851] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.189854] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.189857] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.189860] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.189863] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.189866] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.189870] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.189873] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.189876] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.189879] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.189882] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window] [ 0.189890] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.189975] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.189983] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit] [ 0.189987] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.189991] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.190069] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.190075] pci 0000:00:03.0: reg 0x10: [mem 0xf7218000-0xf721bfff 64bit] [ 0.190153] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000 [ 0.190161] pci 0000:00:04.0: reg 0x10: [mem 0xf7210000-0xf7217fff 64bit] [ 0.190256] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.190270] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit] [ 0.190314] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.190372] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.190397] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.190411] pci 0000:00:16.0: reg 0x10: [mem 0xf7221000-0xf722101f 64bit] [ 0.190460] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.190550] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.190599] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.190697] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.190727] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.190776] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.190870] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.190903] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.191061] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.191072] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.191077] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.191082] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.191088] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.191093] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.191098] pci 0000:00:1f.2: reg 0x24: [mem 0xf721e000-0xf721e7ff] [ 0.191124] pci 0000:00:1f.2: PME# supported from D3hot [ 0.191189] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.191201] pci 0000:00:1f.3: reg 0x10: [mem 0xf721d000-0xf721d0ff 64bit] [ 0.191217] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.191301] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.191324] pci 0000:00:1f.6: reg 0x10: [mem 0xf721c000-0xf721cfff 64bit] [ 0.191529] pci 0000:01:00.0: [10ec:5249] type 00 class 0xff0000 [ 0.191553] pci 0000:01:00.0: reg 0x10: [mem 0xf7100000-0xf7100fff] [ 0.191668] pci 0000:01:00.0: supports D1 D2 [ 0.191669] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.191703] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.194735] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.194741] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff] [ 0.194844] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 0.194884] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit] [ 0.195053] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.195099] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.196754] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.196760] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.200658] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.200724] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.200794] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.200858] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.200923] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.200985] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.201047] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.201109] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202484] ACPI: Enabled 3 GPEs in block 00 to 7F [ 0.202550] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930 [ 0.202693] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 0.202797] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.202800] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.202804] vgaarb: loaded [ 0.202806] vgaarb: bridge control possible 0000:00:02.0 [ 0.202863] SCSI subsystem initialized [ 0.202894] libata version 3.00 loaded. [ 0.202910] ACPI: bus type USB registered [ 0.202926] usbcore: registered new interface driver usbfs [ 0.202933] usbcore: registered new interface driver hub [ 0.202946] usbcore: registered new device driver usb [ 0.205782] media: Linux media interface: v0.10 [ 0.205790] Linux video capture interface: v2.00 [ 0.205953] wmi: Mapper loaded [ 0.205975] Advanced Linux Sound Architecture Driver Initialized. [ 0.205988] PCI: Using ACPI for IRQ routing [ 0.207147] PCI: pci_cache_line_size set to 64 bytes [ 0.207209] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.207210] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.207211] e820: reserve RAM buffer [mem 0xc4a7d018-0xc7ffffff] [ 0.207212] e820: reserve RAM buffer [mem 0xc6444000-0xc7ffffff] [ 0.207213] e820: reserve RAM buffer [mem 0xdadbf000-0xdbffffff] [ 0.207214] e820: reserve RAM buffer [mem 0xdbaff000-0xdbffffff] [ 0.207215] e820: reserve RAM buffer [mem 0x21e800000-0x21fffffff] [ 0.207293] Bluetooth: Core ver 2.20 [ 0.207298] NET: Registered protocol family 31 [ 0.207301] Bluetooth: HCI device and connection manager initialized [ 0.207303] Bluetooth: HCI socket layer initialized [ 0.207306] Bluetooth: L2CAP socket layer initialized [ 0.207311] Bluetooth: SCO socket layer initialized [ 0.207372] NetLabel: Initializing [ 0.207375] NetLabel: domain hash size = 128 [ 0.207377] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.207390] NetLabel: unlabeled traffic allowed by default [ 0.207431] cfg80211: Calling CRDA to update world regulatory domain [ 0.207488] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.207495] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.209520] Switched to clocksource hpet [ 0.216499] pnp: PnP ACPI init [ 0.216700] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.216704] system 00:00: [io 0xffff] has been reserved [ 0.216707] system 00:00: [io 0xffff] has been reserved [ 0.216709] system 00:00: [io 0xffff] has been reserved [ 0.216712] system 00:00: [io 0x1800-0x18fe] could not be reserved [ 0.216714] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.216719] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.216763] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.216794] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.216798] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.216927] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.216944] pnp 00:04: Plug and Play ACPI device, IDs DLL0665 PNP0f13 (active) [ 0.217103] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.217106] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.217109] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.217111] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.217114] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.217116] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.217119] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.217122] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.217124] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.217127] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.217130] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.217133] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved [ 0.217136] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.217534] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.217537] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.217540] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.217542] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.221567] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 0.222170] pnp: PnP ACPI: found 7 devices [ 0.227957] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.227976] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.227982] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff] [ 0.227988] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.227993] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.228000] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.228002] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.228003] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.228004] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.228005] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.228006] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.228007] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.228008] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.228009] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.228010] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.228011] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.228012] pci_bus 0000:00: resource 15 [mem 0xdf800000-0xfeafffff window] [ 0.228013] pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.228014] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff] [ 0.228046] NET: Registered protocol family 2 [ 0.228186] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.228295] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.228400] TCP: Hash tables configured (established 65536 bind 65536) [ 0.228427] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.228448] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.228498] NET: Registered protocol family 1 [ 0.228568] RPC: Registered named UNIX socket transport module. [ 0.228571] RPC: Registered udp transport module. [ 0.228573] RPC: Registered tcp transport module. [ 0.228575] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.228585] pci 0000:00:02.0: Video device with shadowed ROM [ 0.228772] PCI: CLS 64 bytes, default 64 [ 0.228806] Unpacking initramfs... [ 0.430693] Freeing initrd memory: 18360K (ffff88003ee0d000 - ffff88003fffb000) [ 0.430724] dmar: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0 [ 0.430730] dmar: ACPI device "INT3438:00" under DMAR at fed91000 as 00:13.0 [ 0.430740] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.430744] software IO TLB [mem 0xbe8fa000-0xc28fa000] (64MB) mapped at [ffff8800be8fa000-ffff8800c28f9fff] [ 0.431015] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x18 [ 0.431022] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x18 [ 0.431028] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x18 [ 0.431034] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x18 [ 0.431066] microcode: Microcode Update Driver: v2.00 <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6@public.gmane.org>, Peter Oruba [ 0.431298] AVX2 version of gcm_enc/dec engaged. [ 0.431302] AES CTR mode by8 optimization enabled [ 0.432748] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 0.433942] alg: No test for crc32 (crc32-pclmul) [ 0.434120] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.434133] Initialise system trusted keyring [ 0.434146] audit: initializing netlink subsys (disabled) [ 0.434155] audit: type=2000 audit(1437922915.413:1): initialized [ 0.434452] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.435403] zpool: loaded [ 0.435530] VFS: Disk quotas dquot_6.6.0 [ 0.435554] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.435826] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org). [ 0.435919] fuse init (API version 7.23) [ 0.436012] Key type big_key registered [ 0.436015] SELinux: Registering netfilter hooks [ 0.436812] alg: No test for stdrng (krng) [ 0.438540] NET: Registered protocol family 38 [ 0.438548] Key type asymmetric registered [ 0.438552] Asymmetric key parser 'x509' registered [ 0.438584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.438612] io scheduler noop registered [ 0.438616] io scheduler deadline registered [ 0.438629] io scheduler cfq registered (default) [ 0.438994] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.438998] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.439001] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.439015] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.439018] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.439022] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.439026] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.439038] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.439060] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.439094] efifb: probing for efifb [ 0.439131] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 22500k, total 22500k [ 0.439135] efifb: mode is 3200x1800x32, linelength=12800, pages=1 [ 0.439137] efifb: scrolling: redraw [ 0.439140] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.447683] Console: switching to colour frame buffer device 400x112 [ 0.455653] fb0: EFI VGA frame buffer device [ 0.455676] intel_idle: MWAIT substates: 0x11142120 [ 0.455677] intel_idle: v0.4 model 0x3D [ 0.455678] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.456263] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 0.456320] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (CPU0, 81) node ffff8802158aff50 [ 0.456368] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (CPU1, 81) node ffff8802158aff78 [ 0.456416] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (CPU2, 81) node ffff8802158affa0 [ 0.456464] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (CPU3, 81) node ffff8802158affc8 [ 0.456999] ACPI: AC Adapter [AC] (off-line) [ 0.457137] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.457864] ACPI: Lid Switch [LID0] [ 0.457915] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.457942] ACPI: Power Button [PBTN] [ 0.457977] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.457998] ACPI: Sleep Button [SBTN] [ 0.458030] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.458053] ACPI: Power Button [PWRF] [ 0.458079] evxface-0664 install_fixed_event_ha: Enabled fixed event PowerButton (2), Handler=ffffffff814c4e38 [ 0.459406] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.459423] ACPI: Thermal Zone [THM] (25 C) [ 0.462802] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.462823] ACPI: Thermal Zone [TZ00] (66 C) [ 0.465841] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.465860] ACPI: Thermal Zone [TZ01] (66 C) [ 0.482059] ACPI: Battery Slot [BAT0] (battery present) [ 0.482127] GHES: HEST is not enabled! [ 0.482190] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.482643] Non-volatile memory driver v1.3 [ 0.482682] Linux agpgart interface v0.103 [ 0.482753] [drm] Initialized drm 1.1.0 20060810 [ 0.483235] [drm] Memory usable by graphics device = 4096M [ 0.483253] checking generic (e0000000 15f9000) vs hw (e0000000 10000000) [ 0.483254] fb: switching to inteldrmfb from EFI VGA [ 0.483281] Console: switching to colour dummy device 80x25 [ 0.483371] [drm] Replacing VGA console driver [ 0.483862] [drm] ACPI BIOS requests an excessive sleep of 10000 ms, using 1500 ms instead [ 0.490037] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.490042] [drm] Driver supports precise vblank timestamp query. [ 0.490134] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.505040] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.515135] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 0.515157] fbcon: inteldrmfb (fb0) is primary device [ 0.515186] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0 [ 0.517921] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 0.518044] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 46 [ 0.521301] ahci 0000:00:1f.2: version 3.0 [ 0.521403] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.531735] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode [ 0.531737] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 0.532124] scsi host0: ahci [ 0.532346] scsi host1: ahci [ 0.532463] scsi host2: ahci [ 0.532550] scsi host3: ahci [ 0.532579] ata1: DUMMY [ 0.532580] ata2: DUMMY [ 0.532580] ata3: DUMMY [ 0.532581] ata4: SATA max UDMA/133 abar m2048@0xf721e000 port 0xf721e280 irq 47 [ 0.532638] libphy: Fixed MDIO Bus: probed [ 0.532640] tun: Universal TUN/TAP device driver, 1.6 [ 0.532640] tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org> [ 0.532688] usbcore: registered new interface driver r8152 [ 0.532694] usbcore: registered new interface driver cdc_ether [ 0.532845] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.532875] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.532939] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.532943] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.532994] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.532995] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.532996] usb usb1: Product: xHCI Host Controller [ 0.532996] usb usb1: Manufacturer: Linux 4.0.0+ xhci-hcd [ 0.532997] usb usb1: SerialNumber: 0000:00:14.0 [ 0.533073] hub 1-0:1.0: USB hub found [ 0.533082] hub 1-0:1.0: 11 ports detected [ 0.536872] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.536896] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.536915] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.536915] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.536916] usb usb2: Product: xHCI Host Controller [ 0.536917] usb usb2: Manufacturer: Linux 4.0.0+ xhci-hcd [ 0.536917] usb usb2: SerialNumber: 0000:00:14.0 [ 0.536976] hub 2-0:1.0: USB hub found [ 0.536982] hub 2-0:1.0: 4 ports detected [ 0.538344] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.538347] ehci-pci: EHCI PCI platform driver [ 0.538353] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.538358] ohci-pci: OHCI PCI platform driver [ 0.538364] uhci_hcd: USB Universal Host Controller Interface driver [ 0.538387] usbcore: registered new interface driver usb-storage [ 0.538404] usbcore: registered new interface driver usbserial [ 0.538407] usbcore: registered new interface driver usbserial_generic [ 0.538411] usbserial: USB Serial support registered for generic [ 0.538416] usbcore: registered new interface driver ftdi_sio [ 0.538419] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.538445] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.539076] i8042: Warning: Keylock active [ 0.541252] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.541254] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.541342] mousedev: PS/2 mouse device common for all mice [ 0.541651] evxface-0664 install_fixed_event_ha: Enabled fixed event RealTimeClock (4), Handler=ffffffff81781a70 [ 0.541656] rtc_cmos 00:01: RTC can wake from S4 [ 0.541775] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.541797] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.541883] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254) [ 0.541884] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.541909] usbcore: registered new interface driver uvcvideo [ 0.541909] USB Video Class driver (1.1.1) [ 0.543040] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.544575] ACPI Warning: \_SB_.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20150410/nspredef-297) [ 0.544577] ACPI: Invalid package element [0]: got number, expecting [R] [ 0.578431] _ART package 0 is invalid, ignored [ 0.578431] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 0.597612] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 0.597655] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 0.597779] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 0.597797] iTCO_vendor_support: vendor-support=0 [ 0.597846] device-mapper: uevent: version 1.0.3 [ 0.597972] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org [ 0.598129] usbcore: registered new interface driver btusb [ 0.598140] Intel P-state driver initializing. [ 0.598295] sdhci: Secure Digital Host Controller Interface driver [ 0.598296] sdhci: Copyright(c) Pierre Ossman [ 0.602231] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 0.602245] EFI Variables Facility v0.08 2004-May-17 [ 0.605110] hidraw: raw HID events driver (C) Jiri Kosina [ 0.605476] usbcore: registered new interface driver usbhid [ 0.605477] usbhid: USB HID core driver [ 0.628848] i2c_hid i2c-DLL0665:01: failed to retrieve report from device. [ 0.637072] i2c_hid i2c-DLL0665:01: failed to retrieve report from device. [ 0.637922] i2c_hid i2c-DLL0665:01: failed to retrieve report from device. [ 0.639875] i2c_hid i2c-DLL0665:01: failed to retrieve report from device. [ 0.639923] input: DLL0665:01 06CB:76AD UNKNOWN as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLL0665:01/0018:06CB:76AD.0001/input/input8 [ 0.640241] hid-multitouch 0018:06CB:76AD.0001: input,hidraw0: <UNKNOWN> HID v1.00 Mouse [DLL0665:01 06CB:76AD] on [ 0.641551] input: Dell WMI hotkeys as /devices/virtual/input/input10 [ 0.642201] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 0.642334] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops) [ 0.642439] drop_monitor: Initializing network drop monitor service [ 0.642473] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 0.642911] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.642980] Initializing XFRM netlink socket [ 0.643304] NET: Registered protocol family 10 [ 0.643510] mip6: Mobile IPv6 [ 0.643517] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.643732] NET: Registered protocol family 17 [ 0.643745] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.643748] Ebtables v2.0 registered [ 0.644245] Loading compiled-in X.509 certificates [ 0.647757] Loaded X.509 cert 'Magrathea: Glacier signing key: fc047a540e21515ad039688bb8a1cf32a880e5c8' [ 0.648061] registered taskstats version 1 [ 0.648514] rtc_cmos 00:01: setting system clock to 2015-07-26 15:01:56 UTC (1437922916) [ 0.648657] ALSA device list: [ 0.648657] #0: HDA Intel HDMI at 0xf7218000 irq 49 [ 0.889999] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 1.054881] usb 1-3: No LPM exit latency info found, disabling LPM. [ 1.056038] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2a [ 1.056039] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.070998] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 1.071024] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2 [ 1.071025] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-2) [ 1.071033] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2 [ 1.071033] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.8.bseq [ 1.128287] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 1.210206] usb 1-4: new full-speed USB device number 3 using xhci_hcd [ 1.376524] usb 1-4: New USB device found, idVendor=04f3, idProduct=20d0 [ 1.376526] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 1.376527] usb 1-4: Product: Touchscreen [ 1.376528] usb 1-4: Manufacturer: ELAN [ 1.376729] usb 1-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.385389] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0002/input/input11 [ 1.385910] hid-multitouch 0003:04F3:20D0.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0 [ 1.433404] tsc: Refined TSC clocksource calibration: 2593.990 MHz [ 1.433410] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x25640ebfed9, max_idle_ns: 440795320785 ns [ 1.538379] usb 1-5: new high-speed USB device number 4 using xhci_hcd [ 1.592848] Console: switching to colour frame buffer device 400x112 [ 1.682598] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.682599] i915 0000:00:02.0: registered panic notifier [ 1.726638] usb 1-5: New USB device found, idVendor=0bda, idProduct=5682 [ 1.728415] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.729953] usb 1-5: Product: Integrated_Webcam_HD [ 1.731416] usb 1-5: Manufacturer: CKFEH41F301030009340 [ 1.732891] usb 1-5: SerialNumber: 200901010001 [ 1.737619] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5682) [ 1.744001] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13 [ 1.993722] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.997466] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.997469] ata4.00: ATA-9: SAMSUNG SSD PM851 M.2 2280 256GB, EXT25D0Q, max UDMA/133 [ 1.999193] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.000995] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 2.001031] ata4.00: configured for UDMA/133 [ 2.002644] scsi 3:0:0:0: Direct-Access ATA SAMSUNG SSD PM85 5D0Q PQ: 0 ANSI: 5 [ 2.004361] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.004399] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 2.007611] sd 3:0:0:0: [sda] Write Protect is off [ 2.009100] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.009107] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.012288] sda: sda1 sda2 sda3 [ 2.014323] sd 3:0:0:0: [sda] Attached SCSI disk [ 2.016159] Freeing unused kernel memory: 1680K (ffffffff823af000 - ffffffff82553000) [ 2.017723] Write protecting the kernel read-only data: 18432k [ 2.019450] Freeing unused kernel memory: 508K (ffff880001b81000 - ffff880001c00000) [ 2.021209] Freeing unused kernel memory: 1244K (ffff8800020c9000 - ffff880002200000) [ 2.027486] random: systemd urandom read with 81 bits of entropy available [ 2.029942] systemd[1]: systemd 216 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.031667] systemd[1]: Detected architecture 'x86-64'. [ 2.033287] systemd[1]: Running in initial RAM disk. [ 2.040050] systemd[1]: Set hostname to <mfleming-mobl1.ger.corp.intel.com>. [ 2.063606] systemd[1]: Expecting device dev-disk-by\x2duuid-AF27\x2d22C8.device... [ 2.066933] systemd[1]: Expecting device dev-mapper-fedora\x2dswap.device... [ 2.070261] systemd[1]: Expecting device dev-disk-by\x2duuid-e75ed791\x2dd3e4\x2d480d\x2daa9f\x2d499f34a15b23.device... [ 2.073594] systemd[1]: Expecting device dev-mapper-fedora\x2droot.device... [ 2.076951] systemd[1]: Starting Timers. [ 2.080225] systemd[1]: Reached target Timers. [ 2.081817] systemd[1]: Expecting device dev-disk-by\x2duuid-26312b50\x2dd793\x2d4686\x2da576\x2d28b32bee5a21.device... [ 2.085200] systemd[1]: Expecting device dev-mapper-luks\x2d26312b50\x2dd793\x2d4686\x2da576\x2d28b32bee5a21.device... [ 2.088478] systemd[1]: Starting -.slice. [ 2.095337] systemd[1]: Created slice -.slice. [ 2.096945] systemd[1]: Starting udev Control Socket. [ 2.100227] systemd[1]: Listening on udev Control Socket. [ 2.101827] systemd[1]: Starting udev Kernel Socket. [ 2.105091] systemd[1]: Listening on udev Kernel Socket. [ 2.106657] systemd[1]: Starting Journal Socket. [ 2.109904] systemd[1]: Listening on Journal Socket. [ 2.111488] systemd[1]: Starting System Slice. [ 2.114859] systemd[1]: Created slice System Slice. [ 2.116445] systemd[1]: Started dracut ask for additional cmdline parameters. [ 2.118073] systemd[1]: Starting dracut cmdline hook... [ 2.121514] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 2.124979] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.126669] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.130309] systemd[1]: Starting system-systemd\x2dcryptsetup.slice. [ 2.134123] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 2.135762] systemd[1]: Starting Journal Socket (/dev/log). [ 2.137628] systemd[1]: Starting Slices. [ 2.141221] systemd[1]: Reached target Slices. [ 2.142834] systemd[1]: Starting Setup Virtual Console... [ 2.146490] systemd[1]: Started Load Kernel Modules. [ 2.148116] systemd[1]: Starting Apply Kernel Variables... [ 2.162120] systemd[1]: Starting Swap. [ 2.168223] systemd[1]: Reached target Swap. [ 2.171263] systemd[1]: Starting Local File Systems. [ 2.177399] systemd[1]: Reached target Local File Systems. [ 2.183979] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 2.190467] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.196937] systemd[1]: Started Apply Kernel Variables. [ 2.203330] systemd[1]: Started dracut cmdline hook. [ 2.211283] systemd[1]: Starting dracut pre-udev hook... [ 2.217606] systemd[1]: Starting Sockets. [ 2.223499] systemd[1]: Reached target Sockets. [ 2.225412] systemd[1]: Starting Journal Service... [ 2.229143] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.236303] systemd[1]: Started Setup Virtual Console. [ 2.240688] systemd[1]: Started Create Static Device Nodes in /dev. [ 2.243927] systemd[1]: Started dracut pre-udev hook. [ 2.247817] systemd[1]: Starting udev Kernel Device Manager... [ 2.255156] systemd[1]: Started udev Kernel Device Manager. [ 2.258248] systemd[1]: Started Journal Service. [ 2.434096] Switched to clocksource tsc [ 3.082655] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 3.356550] cfg80211: Calling CRDA to update world regulatory domain [ 3.922408] random: nonblocking pool is initialized [ 5.297146] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 6.502478] cfg80211: Calling CRDA to update world regulatory domain [ 7.245333] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 8.031733] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [BAT0] (Device) Value 0x80 (Status Change) Node ffff8802158c3848 [ 9.189996] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 9.299384] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 9.567098] systemd-journald[329]: Received SIGTERM from PID 1 (systemd). [ 9.656345] cfg80211: Calling CRDA to update world regulatory domain [ 9.788153] audit: type=1404 audit(1437922925.633:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 9.835622] SELinux: 32768 avtab hash slots, 105179 rules. [ 9.846337] SELinux: 32768 avtab hash slots, 105179 rules. [ 9.865029] SELinux: 8 users, 103 roles, 4998 types, 294 bools, 1 sens, 1024 cats [ 9.865032] SELinux: 83 classes, 105179 rules [ 9.867805] SELinux: Permission audit_read in class capability2 not defined in policy. [ 9.869051] SELinux: Class binder not defined in policy. [ 9.870302] SELinux: the above unknown classes and permissions will be allowed [ 9.871565] SELinux: Completing initialization. [ 9.871565] SELinux: Setting up existing superblocks. [ 9.876661] audit: type=1403 audit(1437922925.721:3): policy loaded auid=4294967295 ses=4294967295 [ 9.881145] systemd[1]: Successfully loaded SELinux policy in 98.589ms. [ 9.927710] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 9.953423] systemd[1]: Relabelled /dev and /run in 13.901ms. [ 10.445206] EXT4-fs (dm-2): re-mounted. Opts: (null) [ 10.467314] systemd-journald[688]: Received request to flush runtime journal from PID 1 [ 11.144360] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 12.225684] sst-acpi INT3438:00: DesignWare DMA Controller, 8 channels [ 12.247948] (NULL device *): Direct firmware load for intel/IntcPP01.bin failed with error -2 [ 12.250139] (NULL device *): fw image intel/IntcPP01.bin not available(-2) [ 12.252737] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [ 12.274157] Intel(R) Wireless WiFi driver for Linux [ 12.275839] Copyright(c) 2003- 2015 Intel Corporation [ 12.277375] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 12.281280] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-13.ucode failed with error -2 [ 12.295783] broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> System Pin mapping ok [ 12.298413] broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> Offload0 Pin mapping ok [ 12.301010] broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> Offload1 Pin mapping ok [ 12.303580] broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> Loopback Pin mapping ok [ 12.308338] iwlwifi 0000:02:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm [ 12.309390] broadwell-audio broadwell-audio: rt286-aif1 <-> snd-soc-dummy-dai mapping ok [ 12.320988] Adding 8126460k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:8126460k SSFS [ 12.322155] input: broadwell-rt286 Headset as /devices/pci0000:00/INT3438:00/broadwell-audio/sound/card1/input14 [ 12.768663] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 12.770155] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 12.771762] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 12.810237] cfg80211: Calling CRDA to update world regulatory domain [ 12.834958] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 12.835921] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 12.932714] cfg80211: World regulatory domain updated: [ 12.934226] cfg80211: DFS Master region: unset [ 12.934237] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 12.937100] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 12.938770] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 12.940195] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 12.941594] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 12.942981] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 12.944379] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 12.945756] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 12.947229] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 12.949216] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 13.004247] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 13.018044] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 13.099059] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 13.166806] audit: type=1305 audit(1437919329.009:4): audit_pid=847 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 [ 13.636905] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 13.637112] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 13.733809] psmouse serio1: Failed to deactivate mouse on isa0060/serio1 [ 14.199195] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 14.588209] device virbr0-nic entered promiscuous mode [ 14.591501] virbr0: port 1(virbr0-nic) entered forwarding state [ 14.591510] virbr0: port 1(virbr0-nic) entered forwarding state [ 14.784693] virbr0: port 1(virbr0-nic) entered disabled state [ 15.297972] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 17.251797] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 18.403963] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7 [ 18.605882] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 19.206355] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 20.572826] wlp2s0: authenticate with a8:54:b2:90:ca:e4 [ 20.576759] wlp2s0: send auth to a8:54:b2:90:ca:e4 (try 1/3) [ 20.578682] wlp2s0: authenticated [ 20.578999] wlp2s0: associate with a8:54:b2:90:ca:e4 (try 1/3) [ 20.582670] wlp2s0: RX AssocResp from a8:54:b2:90:ca:e4 (capab=0x431 status=0 aid=1) [ 20.583973] wlp2s0: associated [ 21.163253] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 23.114762] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 25.069126] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 27.037155] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 29.487448] Adjusting tsc more than 11% (5419137 vs 7179175) [ 37.791337] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [AMW0] (Device) Value 0xD0 (Hardware-Specific) Node ffff8802158bf1e0 [ 37.806763] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [LCD_] (Device) Value 0x87 (Device-Specific) Node ffff8802158bfa50 [ 64.306679] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [ 320.512651] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [ 3193.010029] perf interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 4660.044644] IPv6: ADDRCONF(NETDEV_CHANGE): vpn0: link becomes ready [ 4660.759309] IPv6: ADDRCONF(NETDEV_CHANGE): vpn0: link becomes ready [ 4673.091918] device vnet0 entered promiscuous mode [ 4673.093850] virbr0: port 2(vnet0) entered listening state [ 4673.093860] virbr0: port 2(vnet0) entered listening state [ 4673.601476] kvm: zapping shadow pages for mmio generation wraparound [ 4675.102019] virbr0: port 2(vnet0) entered learning state [ 4677.107252] virbr0: topology change detected, propagating [ 4677.107263] virbr0: port 2(vnet0) entered forwarding state [ 4689.796710] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 5343.661577] virbr0: port 2(vnet0) entered disabled state [ 5343.662070] device vnet0 left promiscuous mode [ 5343.662095] virbr0: port 2(vnet0) entered disabled state [20917.044276] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [AC__] (Device) Value 0x80 (Status Change) Node ffff8802158c3758 [20917.044326] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [BAT0] (Device) Value 0x80 (Status Change) Node ffff8802158c3848 [20917.045204] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [20917.045239] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [CPU0] (Processor) Value 0x81 (Information Change) Node ffff8802158aff50 [20917.045266] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [CPU1] (Processor) Value 0x81 (Information Change) Node ffff8802158aff78 [20917.045291] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [CPU2] (Processor) Value 0x81 (Information Change) Node ffff8802158affa0 [20917.045316] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [CPU3] (Processor) Value 0x81 (Information Change) Node ffff8802158affc8 [20917.172364] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [20920.605614] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [BAT0] (Device) Value 0x80 (Status Change) Node ffff8802158c3848 [30244.861386] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [BAT0] (Device) Value 0x80 (Status Change) Node ffff8802158c3848 [47597.023554] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [71744.643242] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [72355.165743] device vnet0 entered promiscuous mode [72355.171722] virbr0: port 2(vnet0) entered listening state [72355.171733] virbr0: port 2(vnet0) entered listening state [72355.706258] kvm: zapping shadow pages for mmio generation wraparound [72357.175584] virbr0: port 2(vnet0) entered learning state [72359.180813] virbr0: topology change detected, propagating [72359.180827] virbr0: port 2(vnet0) entered forwarding state [72509.746610] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [79642.220531] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [79670.600446] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [79744.346081] virbr0: port 2(vnet0) entered disabled state [79744.347022] device vnet0 left promiscuous mode [79744.347043] virbr0: port 2(vnet0) entered disabled state [79744.422192] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [79971.465636] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [AMW0] (Device) Value 0xD0 (Hardware-Specific) Node ffff8802158bf1e0 [79971.466132] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [LCD_] (Device) Value 0x87 (Device-Specific) Node ffff8802158bfa50 [80477.323500] usb 1-1: new low-speed USB device number 5 using xhci_hcd [80477.492206] usb 1-1: New USB device found, idVendor=046d, idProduct=c404 [80477.492212] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [80477.492215] usb 1-1: Product: Trackball [80477.492217] usb 1-1: Manufacturer: Logitech [80477.493368] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [80477.498167] input: Logitech Trackball as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C404.0003/input/input15 [80477.498690] hid-generic 0003:046D:C404.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:14.0-1/input0 [83553.913804] iwlwifi 0000:02:00.0: Queue 16 stuck for 10000 ms. [83553.913818] iwlwifi 0000:02:00.0: Current SW read_ptr 183 write_ptr 218 [83553.913861] iwl data: 00000000: bf 00 00 00 00 00 00 00 00 00 80 ff 00 00 00 00 ................ [83553.913886] iwlwifi 0000:02:00.0: FH TRBs(0) = 0x00000000 [83553.913910] iwlwifi 0000:02:00.0: FH TRBs(1) = 0xc01100c5 [83553.913931] iwlwifi 0000:02:00.0: FH TRBs(2) = 0x00000000 [83553.913952] iwlwifi 0000:02:00.0: FH TRBs(3) = 0x803000be [83553.913973] iwlwifi 0000:02:00.0: FH TRBs(4) = 0x00000000 [83553.913994] iwlwifi 0000:02:00.0: FH TRBs(5) = 0x00000000 [83553.914015] iwlwifi 0000:02:00.0: FH TRBs(6) = 0x00000000 [83553.914036] iwlwifi 0000:02:00.0: FH TRBs(7) = 0x0070904f [83553.914099] iwlwifi 0000:02:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [191,191] [83553.914160] iwlwifi 0000:02:00.0: Q 1 is active and mapped to fifo 2 ra_tid 0x0000 [0,0] [83553.914222] iwlwifi 0000:02:00.0: Q 2 is active and mapped to fifo 1 ra_tid 0x0000 [1,1] [83553.914284] iwlwifi 0000:02:00.0: Q 3 is active and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914346] iwlwifi 0000:02:00.0: Q 4 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914408] iwlwifi 0000:02:00.0: Q 5 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914470] iwlwifi 0000:02:00.0: Q 6 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914528] iwlwifi 0000:02:00.0: Q 7 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914591] iwlwifi 0000:02:00.0: Q 8 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914653] iwlwifi 0000:02:00.0: Q 9 is active and mapped to fifo 7 ra_tid 0x0000 [80,80] [83553.914723] iwlwifi 0000:02:00.0: Q 10 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914785] iwlwifi 0000:02:00.0: Q 11 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914847] iwlwifi 0000:02:00.0: Q 12 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914909] iwlwifi 0000:02:00.0: Q 13 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914971] iwlwifi 0000:02:00.0: Q 14 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.915033] iwlwifi 0000:02:00.0: Q 15 is active and mapped to fifo 5 ra_tid 0x0000 [0,0] [83553.915095] iwlwifi 0000:02:00.0: Q 16 is active and mapped to fifo 1 ra_tid 0x0000 [183,218] [83553.915157] iwlwifi 0000:02:00.0: Q 17 is inactive and mapped to fifo 3 ra_tid 0x0007 [57,57] [83553.915219] iwlwifi 0000:02:00.0: Q 18 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.915281] iwlwifi 0000:02:00.0: Q 19 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.915354] iwlwifi 0000:02:00.0: Microcode SW error detected. Restarting 0x2000000. [83553.915358] iwlwifi 0000:02:00.0: CSR values: [83553.915360] iwlwifi 0000:02:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) [83553.915375] iwlwifi 0000:02:00.0: CSR_HW_IF_CONFIG_REG: 0X00489200 [83553.915390] iwlwifi 0000:02:00.0: CSR_INT_COALESCING: 0X00000040 [83553.915406] iwlwifi 0000:02:00.0: CSR_INT: 0X00000000 [83553.915421] iwlwifi 0000:02:00.0: CSR_INT_MASK: 0X00000000 [83553.915436] iwlwifi 0000:02:00.0: CSR_FH_INT_STATUS: 0X00000000 [83553.915452] iwlwifi 0000:02:00.0: CSR_GPIO_IN: 0X00000000 [83553.915467] iwlwifi 0000:02:00.0: CSR_RESET: 0X00000000 [83553.915482] iwlwifi 0000:02:00.0: CSR_GP_CNTRL: 0X080403c5 [83553.915497] iwlwifi 0000:02:00.0: CSR_HW_REV: 0X00000210 [83553.915513] iwlwifi 0000:02:00.0: CSR_EEPROM_REG: 0Xd55555d5 [83553.915528] iwlwifi 0000:02:00.0: CSR_EEPROM_GP: 0X00000000 [83553.915543] iwlwifi 0000:02:00.0: CSR_OTP_GP_REG: 0Xd55555d5 [83553.915559] iwlwifi 0000:02:00.0: CSR_GIO_REG: 0X00080042 [83553.915574] iwlwifi 0000:02:00.0: CSR_GP_UCODE_REG: 0X00000000 [83553.915589] iwlwifi 0000:02:00.0: CSR_GP_DRIVER_REG: 0X00000000 [83553.915604] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP1: 0X00000000 [83553.915620] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP2: 0X00000000 [83553.915635] iwlwifi 0000:02:00.0: CSR_LED_REG: 0X00000060 [83553.915650] iwlwifi 0000:02:00.0: CSR_DRAM_INT_TBL_REG: 0X880d9476 [83553.915665] iwlwifi 0000:02:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 [83553.915681] iwlwifi 0000:02:00.0: CSR_ANA_PLL_CFG: 0Xd55555d5 [83553.915696] iwlwifi 0000:02:00.0: CSR_MONITOR_STATUS_REG: 0Xebb7fff7 [83553.915711] iwlwifi 0000:02:00.0: CSR_HW_REV_WA_REG: 0X0001001a [83553.915727] iwlwifi 0000:02:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 [83553.915729] iwlwifi 0000:02:00.0: FH register values: [83553.915752] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X2131d100 [83553.915764] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X021033e0 [83553.915777] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000078 [83553.915794] iwlwifi 0000:02:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X00801114 [83553.915817] iwlwifi 0000:02:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc [83553.915829] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X03030000 [83553.915842] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 [83553.915854] iwlwifi 0000:02:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001 [83553.915867] iwlwifi 0000:02:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 [83553.915985] iwlwifi 0000:02:00.0: Start IWL Error Log Dump: [83553.915987] iwlwifi 0000:02:00.0: Status: 0x00000000, count: 6 [83553.915989] iwlwifi 0000:02:00.0: Loaded firmware version: 25.17.12.0 [83553.915992] iwlwifi 0000:02:00.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN [83553.915994] iwlwifi 0000:02:00.0: 0x000006F0 | uPc [83553.915996] iwlwifi 0000:02:00.0: 0x00000000 | branchlink1 [83553.915998] iwlwifi 0000:02:00.0: 0x00042870 | branchlink2 [83553.916000] iwlwifi 0000:02:00.0: 0x00043154 | interruptlink1 [83553.916002] iwlwifi 0000:02:00.0: 0x00016F0A | interruptlink2 [83553.916004] iwlwifi 0000:02:00.0: 0x00000000 | data1 [83553.916006] iwlwifi 0000:02:00.0: 0x00000080 | data2 [83553.916007] iwlwifi 0000:02:00.0: 0x07030000 | data3 [83553.916009] iwlwifi 0000:02:00.0: 0x7440117A | beacon time [83553.916011] iwlwifi 0000:02:00.0: 0x01D31E85 | tsf low [83553.916013] iwlwifi 0000:02:00.0: 0x00000000 | tsf hi [83553.916015] iwlwifi 0000:02:00.0: 0x00000000 | time gp1 [83553.916017] iwlwifi 0000:02:00.0: 0x705033DE | time gp2 [83553.916019] iwlwifi 0000:02:00.0: 0x00000000 | time gp3 [83553.916021] iwlwifi 0000:02:00.0: 0x00041911 | uCode version [83553.916023] iwlwifi 0000:02:00.0: 0x00000210 | hw version [83553.916025] iwlwifi 0000:02:00.0: 0x00489200 | board version [83553.916027] iwlwifi 0000:02:00.0: 0x0000001C | hcmd [83553.916029] iwlwifi 0000:02:00.0: 0x00022002 | isr0 [83553.916030] iwlwifi 0000:02:00.0: 0x01800000 | isr1 [83553.916032] iwlwifi 0000:02:00.0: 0x0000000A | isr2 [83553.916034] iwlwifi 0000:02:00.0: 0x004150C0 | isr3 [83553.916036] iwlwifi 0000:02:00.0: 0x00000000 | isr4 [83553.916038] iwlwifi 0000:02:00.0: 0x00000110 | isr_pref [83553.916040] iwlwifi 0000:02:00.0: 0x00000000 | wait_event [83553.916042] iwlwifi 0000:02:00.0: 0x0000822E | l2p_control [83553.916044] iwlwifi 0000:02:00.0: 0x00000020 | l2p_duration [83553.916045] iwlwifi 0000:02:00.0: 0x00000003 | l2p_mhvalid [83553.916047] iwlwifi 0000:02:00.0: 0x00000020 | l2p_addr_match [83553.916049] iwlwifi 0000:02:00.0: 0x00000005 | lmpm_pmg_sel [83553.916051] iwlwifi 0000:02:00.0: 0x13041313 | timestamp [83553.916053] iwlwifi 0000:02:00.0: 0x00347888 | flow_handler [83553.916058] ieee80211 phy0: Hardware restart was requested [83554.069281] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [83554.069490] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [84508.835973] wlp2s0: deauthenticating from a8:54:b2:90:ca:e4 by local choice (Reason: 3=DEAUTH_LEAVING) [84512.600959] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [84512.601164] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [84519.492837] wlp2s0: authenticate with a8:54:b2:90:ca:e4 [84519.496057] wlp2s0: send auth to a8:54:b2:90:ca:e4 (try 1/3) [84519.497917] wlp2s0: authenticated [84519.498621] wlp2s0: associate with a8:54:b2:90:ca:e4 (try 1/3) [84519.501851] wlp2s0: RX AssocResp from a8:54:b2:90:ca:e4 (capab=0x431 status=0 aid=1) [84519.503353] wlp2s0: associated [85292.570104] IPv6: ADDRCONF(NETDEV_CHANGE): vpn0: link becomes ready [85292.963273] IPv6: ADDRCONF(NETDEV_CHANGE): vpn0: link becomes ready [86864.871805] iwlwifi 0000:02:00.0: Queue 2 stuck for 10000 ms. [86864.871810] iwlwifi 0000:02:00.0: Current SW read_ptr 167 write_ptr 229 [86864.871852] iwl data: 00000000: 00 00 00 00 00 00 00 00 80 ff 3f 00 00 00 00 00 ..........?..... [86864.871876] iwlwifi 0000:02:00.0: FH TRBs(0) = 0x00000000 [86864.871897] iwlwifi 0000:02:00.0: FH TRBs(1) = 0x801020b5 [86864.871918] iwlwifi 0000:02:00.0: FH TRBs(2) = 0x00000000 [86864.871939] iwlwifi 0000:02:00.0: FH TRBs(3) = 0x8030001f [86864.871960] iwlwifi 0000:02:00.0: FH TRBs(4) = 0x00000000 [86864.871981] iwlwifi 0000:02:00.0: FH TRBs(5) = 0x00000000 [86864.872002] iwlwifi 0000:02:00.0: FH TRBs(6) = 0x00000000 [86864.872022] iwlwifi 0000:02:00.0: FH TRBs(7) = 0x00709083 [86864.872085] iwlwifi 0000:02:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [32,32] [86864.872146] iwlwifi 0000:02:00.0: Q 1 is active and mapped to fifo 2 ra_tid 0x0000 [0,0] [86864.872208] iwlwifi 0000:02:00.0: Q 2 is active and mapped to fifo 1 ra_tid 0x0000 [167,229] [86864.872270] iwlwifi 0000:02:00.0: Q 3 is active and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872331] iwlwifi 0000:02:00.0: Q 4 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872390] iwlwifi 0000:02:00.0: Q 5 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872448] iwlwifi 0000:02:00.0: Q 6 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872550] iwlwifi 0000:02:00.0: Q 7 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872656] iwlwifi 0000:02:00.0: Q 8 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872761] iwlwifi 0000:02:00.0: Q 9 is active and mapped to fifo 7 ra_tid 0x0000 [132,132] [86864.872845] iwlwifi 0000:02:00.0: Q 10 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872906] iwlwifi 0000:02:00.0: Q 11 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872955] iwlwifi 0000:02:00.0: Q 12 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.873005] iwlwifi 0000:02:00.0: Q 13 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.873064] iwlwifi 0000:02:00.0: Q 14 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.873126] iwlwifi 0000:02:00.0: Q 15 is active and mapped to fifo 5 ra_tid 0x0000 [0,0] [86864.873188] iwlwifi 0000:02:00.0: Q 16 is inactive and mapped to fifo 1 ra_tid 0x0000 [241,241] [86864.873250] iwlwifi 0000:02:00.0: Q 17 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.873298] iwlwifi 0000:02:00.0: Q 18 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.873347] iwlwifi 0000:02:00.0: Q 19 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.873403] iwlwifi 0000:02:00.0: Microcode SW error detected. Restarting 0x2000000. [86864.873405] iwlwifi 0000:02:00.0: CSR values: [86864.873407] iwlwifi 0000:02:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) [86864.873419] iwlwifi 0000:02:00.0: CSR_HW_IF_CONFIG_REG: 0X00489200 [86864.873434] iwlwifi 0000:02:00.0: CSR_INT_COALESCING: 0X00000040 [86864.873446] iwlwifi 0000:02:00.0: CSR_INT: 0X00000000 [86864.873457] iwlwifi 0000:02:00.0: CSR_INT_MASK: 0X00000000 [86864.873469] iwlwifi 0000:02:00.0: CSR_FH_INT_STATUS: 0X00000000 [86864.873481] iwlwifi 0000:02:00.0: CSR_GPIO_IN: 0X00000000 [86864.873497] iwlwifi 0000:02:00.0: CSR_RESET: 0X00000000 [86864.873512] iwlwifi 0000:02:00.0: CSR_GP_CNTRL: 0X080403c5 [86864.873527] iwlwifi 0000:02:00.0: CSR_HW_REV: 0X00000210 [86864.873543] iwlwifi 0000:02:00.0: CSR_EEPROM_REG: 0Xd55555d5 [86864.873558] iwlwifi 0000:02:00.0: CSR_EEPROM_GP: 0X00000000 [86864.873573] iwlwifi 0000:02:00.0: CSR_OTP_GP_REG: 0Xd55555d5 [86864.873588] iwlwifi 0000:02:00.0: CSR_GIO_REG: 0X00080042 [86864.873603] iwlwifi 0000:02:00.0: CSR_GP_UCODE_REG: 0X00000000 [86864.873615] iwlwifi 0000:02:00.0: CSR_GP_DRIVER_REG: 0X00000000 [86864.873626] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP1: 0X00000000 [86864.873638] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP2: 0X00000000 [86864.873649] iwlwifi 0000:02:00.0: CSR_LED_REG: 0X00000060 [86864.873661] iwlwifi 0000:02:00.0: CSR_DRAM_INT_TBL_REG: 0X880d9476 [86864.873673] iwlwifi 0000:02:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 [86864.873684] iwlwifi 0000:02:00.0: CSR_ANA_PLL_CFG: 0Xd55555d5 [86864.873696] iwlwifi 0000:02:00.0: CSR_MONITOR_STATUS_REG: 0Xebb7ff77 [86864.873712] iwlwifi 0000:02:00.0: CSR_HW_REV_WA_REG: 0X0001001a [86864.873727] iwlwifi 0000:02:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 [86864.873730] iwlwifi 0000:02:00.0: FH register values: [86864.873754] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X2131d100 [86864.873779] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X021033e0 [86864.873811] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_WPTR: 0X000000c8 [86864.873837] iwlwifi 0000:02:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X00801114 [86864.873858] iwlwifi 0000:02:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc [86864.873878] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X03030000 [86864.873890] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 [86864.873902] iwlwifi 0000:02:00.0: FH_TSSR_TX_STATUS_REG: 0X07fd0001 [86864.873913] iwlwifi 0000:02:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 [86864.874031] iwlwifi 0000:02:00.0: Start IWL Error Log Dump: [86864.874033] iwlwifi 0000:02:00.0: Status: 0x00000000, count: 6 [86864.874034] iwlwifi 0000:02:00.0: Loaded firmware version: 25.17.12.0 [86864.874036] iwlwifi 0000:02:00.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN [86864.874038] iwlwifi 0000:02:00.0: 0x00000230 | uPc [86864.874039] iwlwifi 0000:02:00.0: 0x00000000 | branchlink1 [86864.874041] iwlwifi 0000:02:00.0: 0x00042870 | branchlink2 [86864.874042] iwlwifi 0000:02:00.0: 0x00043154 | interruptlink1 [86864.874044] iwlwifi 0000:02:00.0: 0x00043154 | interruptlink2 [86864.874045] iwlwifi 0000:02:00.0: 0x00000000 | data1 [86864.874047] iwlwifi 0000:02:00.0: 0x00000080 | data2 [86864.874048] iwlwifi 0000:02:00.0: 0x07030000 | data3 [86864.874050] iwlwifi 0000:02:00.0: 0x4D4027CB | beacon time [86864.874051] iwlwifi 0000:02:00.0: 0x39C67846 | tsf low [86864.874053] iwlwifi 0000:02:00.0: 0x00000000 | tsf hi [86864.874054] iwlwifi 0000:02:00.0: 0x00000000 | time gp1 [86864.874055] iwlwifi 0000:02:00.0: 0x8C1E213D | time gp2 [86864.874057] iwlwifi 0000:02:00.0: 0x00000000 | time gp3 [86864.874058] iwlwifi 0000:02:00.0: 0x00041911 | uCode version [86864.874060] iwlwifi 0000:02:00.0: 0x00000210 | hw version [86864.874061] iwlwifi 0000:02:00.0: 0x00489200 | board version [86864.874063] iwlwifi 0000:02:00.0: 0x0000001C | hcmd [86864.874064] iwlwifi 0000:02:00.0: 0x24022002 | isr0 [86864.874066] iwlwifi 0000:02:00.0: 0x01800000 | isr1 [86864.874067] iwlwifi 0000:02:00.0: 0x0000000A | isr2 [86864.874069] iwlwifi 0000:02:00.0: 0x004140C0 | isr3 [86864.874070] iwlwifi 0000:02:00.0: 0x00000000 | isr4 [86864.874072] iwlwifi 0000:02:00.0: 0x00000110 | isr_pref [86864.874073] iwlwifi 0000:02:00.0: 0x00000000 | wait_event [86864.874075] iwlwifi 0000:02:00.0: 0x00000080 | l2p_control [86864.874076] iwlwifi 0000:02:00.0: 0x00010030 | l2p_duration [86864.874078] iwlwifi 0000:02:00.0: 0x0000003F | l2p_mhvalid [86864.874079] iwlwifi 0000:02:00.0: 0x000000CE | l2p_addr_match [86864.874081] iwlwifi 0000:02:00.0: 0x00000005 | lmpm_pmg_sel [86864.874082] iwlwifi 0000:02:00.0: 0x13041313 | timestamp [86864.874084] iwlwifi 0000:02:00.0: 0x0034C8D8 | flow_handler [86864.874087] ieee80211 phy0: Hardware restart was requested [86865.040868] iwlwifi 0000:02:00.0: Failing on timeout while stopping DMA channel 8 [0x07fd0001] [86865.041278] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [86865.041480] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [87025.198294] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [87129.249000] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [87964.054523] perf interrupt took too long (5005 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [88325.640098] wlp2s0: deauthenticating from a8:54:b2:90:ca:e4 by local choice (Reason: 3=DEAUTH_LEAVING) [88328.987676] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [88328.987887] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [88335.881037] wlp2s0: authenticate with a8:54:b2:90:ca:e4 [88335.884521] wlp2s0: send auth to a8:54:b2:90:ca:e4 (try 1/3) [88335.886311] wlp2s0: authenticated [88335.886506] wlp2s0: associate with a8:54:b2:90:ca:e4 (try 1/3) [88335.889801] wlp2s0: RX AssocResp from a8:54:b2:90:ca:e4 (capab=0x431 status=0 aid=1) [88335.893126] wlp2s0: associated [88341.095641] wlp2s0: deauthenticating from a8:54:b2:90:ca:e4 by local choice (Reason: 3=DEAUTH_LEAVING) [88346.176120] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [88346.176331] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [88353.068841] wlp2s0: authenticate with a8:54:b2:90:ca:e4 [88353.072129] wlp2s0: send auth to a8:54:b2:90:ca:e4 (try 1/3) [88353.073953] wlp2s0: authenticated [88353.075060] wlp2s0: associate with a8:54:b2:90:ca:e4 (try 1/3) [88353.078301] wlp2s0: RX AssocResp from a8:54:b2:90:ca:e4 (capab=0x431 status=0 aid=1) [88353.083971] wlp2s0: associated [88430.644301] wlp2s0: deauthenticating from a8:54:b2:90:ca:e4 by local choice (Reason: 3=DEAUTH_LEAVING) [88434.048735] wlp2s0: authenticate with 7c:03:4c:71:c8:61 [88434.051570] wlp2s0: send auth to 7c:03:4c:71:c8:61 (try 1/3) [88434.053386] wlp2s0: authenticated [88434.053809] wlp2s0: associate with 7c:03:4c:71:c8:61 (try 1/3) [88434.056475] wlp2s0: RX AssocResp from 7c:03:4c:71:c8:61 (capab=0x411 status=0 aid=2) [88434.057891] wlp2s0: associated [88462.307280] IPv6: ADDRCONF(NETDEV_CHANGE): vpn0: link becomes ready ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Regression in v4.2-rc1 caused by hierarchical irqdomain changes @ 2015-07-27 21:15 ` Matt Fleming 0 siblings, 0 replies; 17+ messages in thread From: Matt Fleming @ 2015-07-27 21:15 UTC (permalink / raw) To: Jiang Liu Cc: Thomas Gleixner, linux-kernel, H. Peter Anvin, Ingo Molnar, Wolfram Sang, linux-i2c [-- Attachment #1: Type: text/plain, Size: 7074 bytes --] On Tue, 28 Jul, at 12:35:36AM, Jiang Liu wrote: > Hi Matt, > Sorry for the regression. Could you please help to provide > more information about the regression, such dmesg, /proc/interrupts > and hardware(PCI) info from good and bad kernels? See below. Let me know if you need anything else. 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09) 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Broadwell-U Camarillo Device (rev 09) 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03) 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03) 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3) 00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3) 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03) 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03) 01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI Express Card Reader (rev 01) 02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59) [BAD] CPU0 CPU1 CPU2 CPU3 0: 60 0 0 0 IR-IO-APIC 2-edge timer 1: 4535 2225 12990 2486 IR-IO-APIC 1-edge i8042 3: 1 0 0 0 IR-IO-APIC 3-edge 6: 0 0 0 0 IR-IO-APIC 6-edge dw_dmac 7: 15 1 0 0 IR-IO-APIC 7-edge INT3432:00, INT3433:00 8: 0 0 1 0 IR-IO-APIC 8-edge rtc0 9: 1078 737 1761 536 IR-IO-APIC 9-fasteoi acpi 12: 5 4 64 13 IR-IO-APIC 12-edge i8042 40: 0 0 0 0 DMAR-MSI 0-edge dmar0 41: 0 0 0 0 DMAR-MSI 1-edge dmar1 42: 0 0 0 0 IR-PCI-MSI 458752-edge PCIe PME 43: 0 0 0 0 IR-PCI-MSI 464896-edge PCIe PME 44: 263825 97055 149799 86574 IR-PCI-MSI 32768-edge i915 45: 4 1 20 1 IR-PCI-MSI 360448-edge mei_me 46: 8 7 10 5 IR-PCI-MSI 524288-edge rtsx_pci 47: 265262 96130 273599 126469 IR-PCI-MSI 512000-edge 0000:00:1f.2 48: 6151 3298 11082 2702 IR-PCI-MSI 327680-edge xhci_hcd 49: 826 91 920 257 IR-PCI-MSI 49152-edge snd_hda_intel 50: 363127 229106 850576 196544 IR-PCI-MSI 1048576-edge iwlwifi NMI: 2190 2399 2221 1874 Non-maskable interrupts LOC: 8199446 7602675 7137979 4973130 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts PMI: 2190 2399 2221 1874 Performance monitoring interrupts IWI: 0 1 1 0 IRQ work interrupts RTR: 3 0 0 0 APIC ICR read retries RES: 1117932 1200561 1398843 873543 Rescheduling interrupts CAL: 145275 153343 122202 118672 Function call interrupts TLB: 30552 30936 31487 32651 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 71 71 71 71 Machine check polls ERR: 15 MIS: 0 [GOOD] CPU0 CPU1 CPU2 CPU3 0: 60 0 0 0 IR-IO-APIC-edge timer 1: 73 26 135 54 IR-IO-APIC-edge i8042 3: 16 17 49 20 IR-IO-APIC-fasteoi AudioDSP, dw_dmac 6: 0 0 0 0 IR-IO-APIC-fasteoi dw_dmac 7: 2662 3072 12307 5419 IR-IO-APIC-fasteoi INT3432:00, INT3433:00 8: 0 0 1 0 IR-IO-APIC-edge rtc0 9: 265 48 280 85 IR-IO-APIC-fasteoi acpi 12: 20 5 61 2 IR-IO-APIC-edge i8042 37: 0 0 0 0 IR-IO-APIC 37-fasteoi rt286 39: 415 74 480 116 IR-IO-APIC 39-fasteoi DLL0665:01 40: 0 0 0 0 DMAR-MSI 0-edge dmar0 41: 0 0 0 0 DMAR-MSI 1-edge dmar1 42: 0 0 0 0 IR-PCI-MSI 458752-edge PCIe PME 43: 0 0 0 0 IR-PCI-MSI 464896-edge PCIe PME 44: 1007 402 696 280 IR-PCI-MSI 32768-edge i915 45: 4 1 20 0 IR-PCI-MSI 360448-edge mei_me 46: 19 1 10 0 IR-PCI-MSI 524288-edge rtsx_pci 47: 12101 9057 14481 30320 IR-PCI-MSI 512000-edge 0000:00:1f.2 48: 64 29 126 27 IR-PCI-MSI 327680-edge xhci_hcd 49: 635 21 1179 269 IR-PCI-MSI 49152-edge snd_hda_intel 50: 147 60 164 222 IR-PCI-MSI 1048576-edge iwlwifi NMI: 16 12 18 11 Non-maskable interrupts LOC: 21542 28287 23149 17203 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts PMI: 16 12 18 11 Performance monitoring interrupts IWI: 0 0 1 0 IRQ work interrupts RTR: 3 0 0 0 APIC ICR read retries RES: 5425 8358 6069 5476 Rescheduling interrupts CAL: 308 297 340 293 Function call interrupts TLB: 424 422 432 437 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 2 2 2 2 Machine check polls ERR: 0 MIS: 0 -- Matt Fleming, Intel Open Source Technology Center [-- Attachment #2: dmesg.bad --] [-- Type: text/plain, Size: 75094 bytes --] [ 0.000000] microcode: CPU0 microcode updated early to revision 0x18, date = 2014-12-05 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0+ (matt@mfleming-mobl1.ger.corp.intel.com) (gcc version 4.9.2 20150212 (Red Hat 4.9.2-6) (GCC) ) #61 SMP Mon Jul 27 15:49:20 BST 2015 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.0.0+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rd.luks.uuid=luks-26312b50-d793-4686-a576-28b32bee5a21 LANG=en_GB.UTF-8 acpi.debug_level=0x00002425 acpi.debug_layer=0xe [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c6443fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c6444000-0x00000000c68e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c68e3000-0x00000000dadbefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dadbf000-0x00000000dae7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae80000-0x00000000daeacfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000daead000-0x00000000db7f8fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db7f9000-0x00000000dbafdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbafe000-0x00000000dbafefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xc4a7d018-0xc4a8d057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c4a7d017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c4a7d018-0x00000000c4a8d057] usable [ 0.000000] reserve setup_data: [mem 0x00000000c4a8d058-0x00000000c6443fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c6444000-0x00000000c68e2fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c68e3000-0x00000000dadbefff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dadbf000-0x00000000dae7ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dae80000-0x00000000daeacfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000daead000-0x00000000db7f8fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000db7f9000-0x00000000dbafdfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dbafe000-0x00000000dbafefff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dd000000-0x00000000df7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021e7fffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xdae89000 ACPI 2.0=0xdae89000 SMBIOS=0xf0000 [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. XPS 13 9343/0F5KF3, BIOS A00 11/04/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21e800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FF0000000 write-back [ 0.000000] 2 base 0210000000 mask 7FF8000000 write-back [ 0.000000] 3 base 0218000000 mask 7FFC000000 write-back [ 0.000000] 4 base 021C000000 mask 7FFE000000 write-back [ 0.000000] 5 base 021E000000 mask 7FFF800000 write-back [ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 7 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 8 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 9 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdbaff max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02688000, 0x02688fff] PGTABLE [ 0.000000] BRK [0x02689000, 0x02689fff] PGTABLE [ 0.000000] BRK [0x0268a000, 0x0268afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x21e600000-0x21e7fffff] [ 0.000000] [mem 0x21e600000-0x21e7fffff] page 2M [ 0.000000] BRK [0x0268b000, 0x0268bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21e5fffff] [ 0.000000] [mem 0x200000000-0x21e5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff] [ 0.000000] [mem 0x1e0000000-0x1ffffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc6443fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xc63fffff] page 2M [ 0.000000] [mem 0xc6400000-0xc6443fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xc68e3000-0xdadbefff] [ 0.000000] [mem 0xc68e3000-0xc69fffff] page 4k [ 0.000000] [mem 0xc6a00000-0xdabfffff] page 2M [ 0.000000] [mem 0xdac00000-0xdadbefff] page 4k [ 0.000000] BRK [0x0268c000, 0x0268cfff] PGTABLE [ 0.000000] BRK [0x0268d000, 0x0268dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdbafe000-0xdbafefff] [ 0.000000] [mem 0xdbafe000-0xdbafefff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff] [ 0.000000] [mem 0x100000000-0x1dfffffff] page 1G [ 0.000000] RAMDISK: [mem 0x3ee0e000-0x3fffafff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DAE89000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000DAE890C0 000104 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DAE9C640 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DAE89258 0133E2 (v02 DELL CBX3 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DB7F6F80 000040 [ 0.000000] ACPI: APIC 0x00000000DAE9C750 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DAE9C7D8 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DAE9C820 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DAE9C8C0 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DAE9C900 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DAE9C938 000455 (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000DAE9CD90 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000DAE9CDD8 0004A7 (v02 Intel_ Tpm2Tabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAE9D280 00004B (v02 MeSsdt MeSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: TPM2 0x00000000DAE9D2D0 000034 (v03 00000000 00000000) [ 0.000000] ACPI: LPIT 0x00000000DAE9D308 000094 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000DAE9D3A0 002402 (v02 AcpiRe Ult0Rtd3 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAE9F7A8 000CDB (v02 Ther_R Ther_Rvp 00001000 INTL 20120913) [ 0.000000] ACPI: ASF! 0x00000000DAEA0488 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000DAEA0528 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA0A48 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA15C0 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA1788 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913) [ 0.000000] ACPI: PCCT 0x00000000DAEA1B30 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA1BA0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA2668 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA6818 004646 (v01 DptfTa DptfTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SLIC 0x00000000DAEAAE60 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: MSDM 0x00000000DAEAAFD8 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: DMAR 0x00000000DAEAB030 0000F0 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: CSRT 0x00000000DAEAB120 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: BGRT 0x00000000DAEAB1E8 000038 (v00 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21e7e9000-0x21e7fcfff] [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215e00000-ffff88021ddfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021e7fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c6443fff] [ 0.000000] node 0: [mem 0x00000000c68e3000-0x00000000dadbefff] [ 0.000000] node 0: [mem 0x00000000dbafe000-0x00000000dbafefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021e7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e7fffff] [ 0.000000] On node 0 totalpages: 2068669 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13925 pages used for memmap [ 0.000000] DMA32 zone: 891169 pages, LIFO batch:31 [ 0.000000] Normal zone: 18336 pages used for memmap [ 0.000000] Normal zone: 1173504 pages, LIFO batch:31 [ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED [ 0.000000] Reserving Intel graphics stolen memory at 0xdd800000-0xdf7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] low level lint[0xe5]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc4a7d000-0xc4a7dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc4a8d000-0xc4a8dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc6444000-0xc68e2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdadbf000-0xdae7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae80000-0xdaeacfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaead000-0xdb7f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb7f9000-0xdbafdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbaff000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88021e400000 s97048 r8192 d29928 u524288 [ 0.000000] pcpu-alloc: s97048 r8192 d29928 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2036323 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.0.0+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rd.luks.uuid=luks-26312b50-d793-4686-a576-28b32bee5a21 LANG=en_GB.UTF-8 acpi.debug_level=0x00002425 acpi.debug_layer=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] Memory: 7680856K/8274676K available (11763K kernel code, 1718K rwdata, 4900K rodata, 1680K init, 1192K bss, 593820K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:728 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] tsc: Detected 2594.178 MHz processor [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.35 BogoMIPS (lpj=2594178) [ 0.000027] pid_max: default: 32768 minimum: 301 [ 0.000032] ACPI: Core revision 20150410 [ 0.025925] ACPI: All ACPI Tables successfully acquired [ 0.027283] hwacpi-0107 hw_set_mode : Attempting to enable ACPI mode [ 0.027908] Security Framework initialized [ 0.027915] SELinux: Initializing. [ 0.027921] SELinux: Starting in permissive mode [ 0.028325] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.029603] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.030152] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.030162] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.030329] Initializing cgroup subsys blkio [ 0.030332] Initializing cgroup subsys memory [ 0.030339] Initializing cgroup subsys devices [ 0.030342] Initializing cgroup subsys freezer [ 0.030345] Initializing cgroup subsys net_cls [ 0.030348] Initializing cgroup subsys perf_event [ 0.030350] Initializing cgroup subsys net_prio [ 0.030353] Initializing cgroup subsys hugetlb [ 0.030375] CPU: Physical Processor ID: 0 [ 0.030377] CPU: Processor Core ID: 0 [ 0.030382] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.030384] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.031268] mce: CPU supports 7 MCE banks [ 0.031279] CPU0: Thermal monitoring enabled (TM1) [ 0.031286] process: using mwait in idle threads [ 0.031291] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.031293] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.031663] Freeing SMP alternatives memory: 36K (ffffffff82553000 - ffffffff8255c000) [ 0.041325] ftrace: allocating 40210 entries in 158 pages [ 0.055423] dmar: Host address width 39 [ 0.055428] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.055437] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.055441] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.055446] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.055450] dmar: RMRR base: 0x000000db9e5000 end: 0x000000db9f3fff [ 0.055452] dmar: RMRR base: 0x000000dd000000 end: 0x000000df7fffff [ 0.055454] dmar: ANDD device: 1 name: \_SB.PCI0.SDMA [ 0.055456] dmar: ANDD device: 3 name: \_SB.PCI0.ADSP [ 0.055459] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.055461] HPET id 0 under DRHD base 0xfed91000 [ 0.055819] Your BIOS is broken and requested that x2apic be disabled. This will slightly decrease performance. Use 'intremap=no_x2apic_optout' to override BIOS request. [ 0.055834] Enabled IRQ remapping in xapic mode [ 0.055836] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.056452] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066466] TSC deadline timer enabled [ 0.066468] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (fam: 06, model: 3d, stepping: 04) [ 0.066491] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver. [ 0.066508] ... version: 3 [ 0.066510] ... bit width: 48 [ 0.066512] ... generic registers: 4 [ 0.066514] ... value mask: 0000ffffffffffff [ 0.066516] ... max period: 0000ffffffffffff [ 0.066518] ... fixed-purpose events: 3 [ 0.066519] ... event mask: 000000070000000f [ 0.067338] x86: Booting SMP configuration: [ 0.067341] .... node #0, CPUs: #1 [ 0.079102] microcode: CPU1 microcode updated early to revision 0x18, date = 2014-12-05 [ 0.082119] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.082185] #2 #3 [ 0.110524] x86: Booted up 1 node, 4 CPUs [ 0.110529] smpboot: Total of 4 processors activated (20753.42 BogoMIPS) [ 0.114016] devtmpfs: initialized [ 0.115592] PM: Registering ACPI NVS region [mem 0xdaead000-0xdb7f8fff] (9748480 bytes) [ 0.115729] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.115789] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.115794] pinctrl core: initialized pinctrl subsystem [ 0.115894] NET: Registered protocol family 16 [ 0.118862] cpuidle: using governor menu [ 0.118937] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.118941] ACPI: bus type PCI registered [ 0.118943] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.118992] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.118996] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.119065] PCI: Using configuration type 1 for base access [ 0.119072] dmi type 0xB1 record - unknown flag [ 0.124144] ACPI: Added _OSI(Module Device) [ 0.124147] ACPI: Added _OSI(Processor Device) [ 0.124149] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.124152] ACPI: Added _OSI(Processor Aggregator Device) [ 0.126471] Initializing General Purpose Events (GPEs): [ 0.126515] Initialized GPE 00 to 7F [_GPE] 16 regs on interrupt 0x9 (SCI) [ 0.126598] evxface-0664 install_fixed_event_ha: Enabled fixed event GlobalLock (1), Handler=ffffffff814dc413 [ 0.128806] Initializing Region \PNVA [ 0.129059] Initializing Region \GNVS [ 0.129335] Initializing Region \RCRB [ 0.129356] Initializing Region \_SB_.PCI0.LPCB.LPC_ [ 0.130024] Executing Method \_SB_.PCI0.SAT0._REG [ 0.130468] ACPI: Executed 17 blocks of module-level executable AML code [ 0.130861] Initializing Region \_PR_.PNVS [ 0.130877] Initializing Region \_PR_.IO_D [ 0.130895] Initializing Region \_PR_.IO_P [ 0.131770] Initializing Region \_SB_.PCI0.HBUS [ 0.131795] Initializing Region \_SB_.PCI0.B0D3.RPCS [ 0.131810] Initializing Region \SANV [ 0.131823] Initializing Region \_SB_.PCI0.B0D3.RPCZ [ 0.131835] Initializing Region \_SB_.PCI0.GFX0.PCS_ [ 0.131858] Initializing BufferField \_SB_.PCI0.GFX0.IVD6 [ 0.131868] Initializing BufferField \_SB_.PCI0.GFX0.IVD7 [ 0.131876] Initializing BufferField \_SB_.PCI0.GFX0.IVD8 [ 0.131883] Initializing BufferField \_SB_.PCI0.GFX0.VDP8 [ 0.131893] Initializing Region \_SB_.PCI0.GFX0.IGDP [ 0.131903] Initializing Region \_SB_.PCI0.GFX0.IGDM [ 0.131983] Initializing Region \_SB_.PCI0.B0D4.MBAR [ 0.132159] Initializing Region \_SB_.PCI0.PEG0.PEGP.PCIS [ 0.132167] Initializing Region \_SB_.PCI0.PEG0.PEGR [ 0.132197] Initializing Region \_SB_.PCI0.PEG1.PEGP.PCIS [ 0.132205] Initializing Region \_SB_.PCI0.PEG1.PEGR [ 0.132233] Initializing Region \_SB_.PCI0.PEG2.PEGP.PCIS [ 0.132241] Initializing Region \_SB_.PCI0.PEG2.PEGR [ 0.132269] Initializing Region \_SB_.PCI0.RP01.PXCS [ 0.132291] Initializing Region \_SB_.PCI0.RP02.PXCS [ 0.132308] Initializing Region \_SB_.PCI0.RP02.PXSX.PCCX [ 0.132317] Initializing Region \_SB_.PCI0.RP03.PXCS [ 0.132333] Initializing Region \_SB_.PCI0.RP03.PXSX.PCCX [ 0.132342] Initializing Region \_SB_.PCI0.RP04.PXCS [ 0.132359] Initializing Region \_SB_.PCI0.RP04.PXSX.PCCX [ 0.132373] Initializing Region \_SB_.PCI0.RP05.PXCS [ 0.132391] Initializing Region \_SB_.PCI0.RP06.PXCS [ 0.132407] Initializing Region \_SB_.PCI0.RP06.PXSX.PCCX [ 0.132417] Initializing Region \_SB_.PCI0.RP07.PXCS [ 0.132433] Initializing Region \_SB_.PCI0.RP07.PXSX.PCCX [ 0.132441] Initializing Region \_SB_.PCI0.RP08.PXCS [ 0.132457] Initializing Region \_SB_.PCI0.RP08.PXSX.PCCX [ 0.132466] Initializing Region \_SB_.PCI0.LPCB.SMIE [ 0.132480] Initializing Region \_SB_.PCI0.LPCB.SLPR [ 0.132492] Initializing Region \_SB_.PCI0.LPCB.CPSB [ 0.132506] Initializing Region \_SB_.PCI0.LPCB.LPCR [ 0.132556] Initializing Region \_SB_.PCI0.LPCB.ECDV.ECOR [ 0.132630] Initializing Region \_SB_.PCI0.GLAN.GLBA [ 0.132639] Initializing Region \_SB_.PCI0.EHC1.PWCS [ 0.132646] Initializing Region \_SB_.PCI0.EHC1.PWKE [ 0.132663] Initializing Region \_SB_.PCI0.EHC2.PWCS [ 0.132670] Initializing Region \_SB_.PCI0.EHC2.PWKE [ 0.132684] Initializing Region \_SB_.PCI0.XHC_.XPRT [ 0.132694] Initializing Region \_SB_.PCI0.XHC_.XHCP [ 0.132719] Initializing Region \_SB_.PCI0.XHC_.PWCS [ 0.133024] Initializing BufferField \_SB_.PCI0.GPI0.BMIN [ 0.133033] Initializing BufferField \_SB_.PCI0.GPI0.BMAX [ 0.133118] Initializing Region \_SB_.PCI0.HDEF.HDAR [ 0.133171] Initializing BufferField \_SB_.PCI0.ADSP.B0VL [ 0.133179] Initializing BufferField \_SB_.PCI0.ADSP.B1VL [ 0.133187] Initializing BufferField \_SB_.PCI0.ADSP.IRQN [ 0.133211] Initializing BufferField \_SB_.PCI0.SAT0.PIO0 [ 0.133218] Initializing BufferField \_SB_.PCI0.SAT0.DMA0 [ 0.133226] Initializing BufferField \_SB_.PCI0.SAT0.PIO1 [ 0.133234] Initializing BufferField \_SB_.PCI0.SAT0.DMA1 [ 0.133242] Initializing BufferField \_SB_.PCI0.SAT0.CHNF [ 0.133252] Initializing Region \_SB_.PCI0.SBUS.SMBP [ 0.133260] Initializing Region \_SB_.PCI0.SBUS.SMPB [ 0.133267] Initializing Region \_SB_.PCI0.SBUS.SMBI [ 0.133295] Initializing Region \_SB_.PCI0.MCHP [ 0.133351] Initializing Region \_SB_.PCI0.TPCH.PCHT [ 0.133973] Initializing Region \_SB_.RTCO [ 0.133989] Initializing Region \_SB_.TPMI.SMIP [ 0.133996] Initializing Region \_SB_.TPMI.FHCI [ 0.134004] Initializing Region \_SB_.TPMI.TNVS [ 0.134470] Initializing Region \EXBU [ 0.134479] Initializing Region \DEGA [ 0.134527] Initializing Region \PMIO [ 0.134564] Initializing Region \LGPE [ 0.134592] Initializing Region \GPR_ [ 0.134633] Initializing Region \GPRL [ 0.134665] Initializing Region \PRT0 [ 0.134672] Initializing Region \SPRT [ 0.134683] Initializing Region \USBD [ 0.134690] Initializing Region \UBLK [ 0.134698] Initializing Region \MBAR [ 0.134724] Initializing Region \IO_H [ 0.134794] Initializing Region \ABNV [ 0.134872] Initializing Region \MENV [ 0.134987] Executing Method \_SB_._STA [ 0.134992] Executing Method \_SB_._INI [ 0.134998] Executing Method \_SB_.PCI0._STA [ 0.135002] Executing Method \_SB_.PCI0._INI [ 0.136326] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.137989] Executing Method \_SB_.PCI0.B0D3._STA [ 0.138014] Executing Method \_SB_.PCI0.B0D3._INI [ 0.138047] Executing Method \_SB_.PCI0.PEG0._STA [ 0.138051] Executing Method \_SB_.PCI0.PEG0._INI [ 0.138081] Executing Method \_SB_.PCI0.PEG1._STA [ 0.138084] Executing Method \_SB_.PCI0.PEG1._INI [ 0.138113] Executing Method \_SB_.PCI0.PEG2._STA [ 0.138116] Executing Method \_SB_.PCI0.PEG2._INI [ 0.138144] Executing Method \_SB_.PCI0.RP01._STA [ 0.138148] Executing Method \_SB_.PCI0.RP01._INI [ 0.138186] Executing Method \_SB_.PCI0.RP02._STA [ 0.138189] Executing Method \_SB_.PCI0.RP02._INI [ 0.138230] Executing Method \_SB_.PCI0.RP03._STA [ 0.138234] Executing Method \_SB_.PCI0.RP03._INI [ 0.138271] Executing Method \_SB_.PCI0.RP04._STA [ 0.138274] Executing Method \_SB_.PCI0.RP04._INI [ 0.138312] Executing Method \_SB_.PCI0.RP05._STA [ 0.138316] Executing Method \_SB_.PCI0.RP05._INI [ 0.138352] Executing Method \_SB_.PCI0.RP06._STA [ 0.138356] Executing Method \_SB_.PCI0.RP06._INI [ 0.138393] Executing Method \_SB_.PCI0.RP07._STA [ 0.138396] Executing Method \_SB_.PCI0.RP07._INI [ 0.138433] Executing Method \_SB_.PCI0.RP08._STA [ 0.138436] Executing Method \_SB_.PCI0.RP08._INI [ 0.138473] Executing Method \_SB_.PCI0.XHC_._STA [ 0.138476] Executing Method \_SB_.PCI0.XHC_._INI [ 0.138480] Executing Method \_SB_.PCI0.XHC_.RHUB._STA [ 0.138484] Executing Method \_SB_.PCI0.XHC_.RHUB._INI [ 0.138496] Executing Method \_SB_.PCI0.I2C0._STA [ 0.138525] Executing Method \_SB_.PCI0.I2C0._INI [ 0.138529] Executing Method \_SB_.PCI0.I2C0.ACD0._STA [ 0.138576] Executing Method \_SB_.PCI0.I2C0.ACD0._INI [ 0.138613] Executing Method \_SB_.PCI0.I2C0.ACD1._STA [ 0.138641] Executing Method \_SB_.PCI0.I2C0.ACD2._STA [ 0.138678] Executing Method \_SB_.PCI0.I2C0.ACD3._STA [ 0.138706] Executing Method \_SB_.PCI0.ADSP._STA [ 0.138739] Executing Method \_SB_.PCI0.ADSP._INI [ 0.139317] ACPI: Dynamic OEM Table Load: [ 0.139325] ACPI: SSDT 0xFFFF880214249C00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.140192] ACPI: Dynamic OEM Table Load: [ 0.140198] ACPI: SSDT 0xFFFF880214205000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.141122] ACPI: Dynamic OEM Table Load: [ 0.141129] ACPI: SSDT 0xFFFF880214292C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.142716] ACPI : EC: EC started [ 0.142752] Executing Method \_SB_.PCI0.LPCB.ECDV._REG [ 0.150831] ACPI: Interpreter enabled [ 0.150842] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580) [ 0.150849] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580) [ 0.150863] ACPI: (supports S0 S3 S4 S5) [ 0.150866] ACPI: Using IOAPIC for interrupt routing [ 0.150894] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.152686] ACPI: Power Resource [PG00] (on) [ 0.153075] ACPI: Power Resource [PG01] (on) [ 0.153444] ACPI: Power Resource [PG02] (on) [ 0.153970] ACPI: Power Resource [PXP] (on) [ 0.155375] ACPI: Power Resource [PXP] (on) [ 0.159252] ACPI: Power Resource [PX05] (on) [ 0.160125] ACPI: Power Resource [PAUD] (on) [ 0.180832] ACPI: Power Resource [PXTC] (off) [ 0.182189] ACPI: Power Resource [P3PR] (off) [ 0.187410] ACPI: Power Resource [FN00] (off) [ 0.187476] ACPI: Power Resource [FN01] (off) [ 0.187538] ACPI: Power Resource [FN02] (off) [ 0.187601] ACPI: Power Resource [FN03] (off) [ 0.187665] ACPI: Power Resource [FN04] (off) [ 0.188489] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.188495] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.189077] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.189081] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.189502] PCI host bridge to bus 0000:00 [ 0.189505] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.189508] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.189510] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.189513] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.189516] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.189520] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.189523] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.189526] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.189529] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.189533] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.189536] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.189539] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.189542] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window] [ 0.189550] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.189633] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.189640] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit] [ 0.189646] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.189649] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.189729] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.189734] pci 0000:00:03.0: reg 0x10: [mem 0xf7218000-0xf721bfff 64bit] [ 0.189814] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000 [ 0.189822] pci 0000:00:04.0: reg 0x10: [mem 0xf7210000-0xf7217fff 64bit] [ 0.189916] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.189929] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit] [ 0.189974] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.190032] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.190059] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.190075] pci 0000:00:16.0: reg 0x10: [mem 0xf7221000-0xf722101f 64bit] [ 0.190131] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.190222] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.190271] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.190372] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.190398] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.190447] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.190540] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.190572] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.190733] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.190744] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.190749] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.190754] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.190760] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.190765] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.190770] pci 0000:00:1f.2: reg 0x24: [mem 0xf721e000-0xf721e7ff] [ 0.190796] pci 0000:00:1f.2: PME# supported from D3hot [ 0.190862] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.190874] pci 0000:00:1f.3: reg 0x10: [mem 0xf721d000-0xf721d0ff 64bit] [ 0.190889] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.190973] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.190997] pci 0000:00:1f.6: reg 0x10: [mem 0xf721c000-0xf721cfff 64bit] [ 0.191214] pci 0000:01:00.0: [10ec:5249] type 00 class 0xff0000 [ 0.191233] pci 0000:01:00.0: reg 0x10: [mem 0xf7100000-0xf7100fff] [ 0.191358] pci 0000:01:00.0: supports D1 D2 [ 0.191359] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.191397] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.194341] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.194346] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff] [ 0.194447] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 0.194491] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit] [ 0.194652] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.194696] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.197372] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.197378] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.202268] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202333] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202404] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202458] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202513] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202565] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202617] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202670] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.203909] ACPI: Enabled 3 GPEs in block 00 to 7F [ 0.203968] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930 [ 0.204095] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 0.204198] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.204201] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.204205] vgaarb: loaded [ 0.204207] vgaarb: bridge control possible 0000:00:02.0 [ 0.204263] SCSI subsystem initialized [ 0.204294] libata version 3.00 loaded. [ 0.204310] ACPI: bus type USB registered [ 0.204325] usbcore: registered new interface driver usbfs [ 0.204333] usbcore: registered new interface driver hub [ 0.204345] usbcore: registered new device driver usb [ 0.207396] media: Linux media interface: v0.10 [ 0.207406] Linux video capture interface: v2.00 [ 0.207576] wmi: Mapper loaded [ 0.207598] Advanced Linux Sound Architecture Driver Initialized. [ 0.207611] PCI: Using ACPI for IRQ routing [ 0.208759] PCI: pci_cache_line_size set to 64 bytes [ 0.208821] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.208823] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.208824] e820: reserve RAM buffer [mem 0xc4a7d018-0xc7ffffff] [ 0.208825] e820: reserve RAM buffer [mem 0xc6444000-0xc7ffffff] [ 0.208825] e820: reserve RAM buffer [mem 0xdadbf000-0xdbffffff] [ 0.208827] e820: reserve RAM buffer [mem 0xdbaff000-0xdbffffff] [ 0.208827] e820: reserve RAM buffer [mem 0x21e800000-0x21fffffff] [ 0.208906] Bluetooth: Core ver 2.20 [ 0.208912] NET: Registered protocol family 31 [ 0.208914] Bluetooth: HCI device and connection manager initialized [ 0.208917] Bluetooth: HCI socket layer initialized [ 0.208919] Bluetooth: L2CAP socket layer initialized [ 0.208924] Bluetooth: SCO socket layer initialized [ 0.208983] NetLabel: Initializing [ 0.208986] NetLabel: domain hash size = 128 [ 0.208988] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.209001] NetLabel: unlabeled traffic allowed by default [ 0.209044] cfg80211: Calling CRDA to update world regulatory domain [ 0.209096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.209101] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.211126] Switched to clocksource hpet [ 0.218168] pnp: PnP ACPI init [ 0.218366] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.218371] system 00:00: [io 0xffff] has been reserved [ 0.218373] system 00:00: [io 0xffff] has been reserved [ 0.218376] system 00:00: [io 0xffff] has been reserved [ 0.218378] system 00:00: [io 0x1800-0x18fe] could not be reserved [ 0.218381] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.218386] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.218423] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.218454] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.218457] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.218580] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.218594] pnp 00:04: Plug and Play ACPI device, IDs DLL0665 PNP0f13 (active) [ 0.218749] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.218752] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.218754] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.218757] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.218759] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.218762] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.218765] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.218767] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.218770] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.218774] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.218777] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.218779] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved [ 0.218782] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.219184] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.219187] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.219189] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.219193] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.223177] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 0.223787] pnp: PnP ACPI: found 7 devices [ 0.229584] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.229603] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.229608] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff] [ 0.229615] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.229620] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.229627] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.229629] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.229630] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.229631] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.229632] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.229633] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.229634] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.229635] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.229636] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.229637] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.229638] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.229639] pci_bus 0000:00: resource 15 [mem 0xdf800000-0xfeafffff window] [ 0.229640] pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.229641] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff] [ 0.229675] NET: Registered protocol family 2 [ 0.229817] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.229928] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.230036] TCP: Hash tables configured (established 65536 bind 65536) [ 0.230063] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.230085] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.230134] NET: Registered protocol family 1 [ 0.230208] RPC: Registered named UNIX socket transport module. [ 0.230211] RPC: Registered udp transport module. [ 0.230212] RPC: Registered tcp transport module. [ 0.230214] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.230224] pci 0000:00:02.0: Video device with shadowed ROM [ 0.230423] PCI: CLS 64 bytes, default 64 [ 0.230454] Unpacking initramfs... [ 0.432325] Freeing initrd memory: 18356K (ffff88003ee0e000 - ffff88003fffb000) [ 0.432355] dmar: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0 [ 0.432361] dmar: ACPI device "INT3438:00" under DMAR at fed91000 as 00:13.0 [ 0.432370] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.432374] software IO TLB [mem 0xbe8fa000-0xc28fa000] (64MB) mapped at [ffff8800be8fa000-ffff8800c28f9fff] [ 0.432637] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x18 [ 0.432646] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x18 [ 0.432650] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x18 [ 0.432656] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x18 [ 0.432686] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.432924] AVX2 version of gcm_enc/dec engaged. [ 0.432927] AES CTR mode by8 optimization enabled [ 0.434392] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 0.435613] alg: No test for crc32 (crc32-pclmul) [ 0.435792] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.435803] Initialise system trusted keyring [ 0.435821] audit: initializing netlink subsys (disabled) [ 0.435829] audit: type=2000 audit(1438012293.415:1): initialized [ 0.436127] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.437084] zpool: loaded [ 0.437211] VFS: Disk quotas dquot_6.6.0 [ 0.437238] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.437526] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.437618] fuse init (API version 7.23) [ 0.437712] Key type big_key registered [ 0.437715] SELinux: Registering netfilter hooks [ 0.438527] alg: No test for stdrng (krng) [ 0.440323] NET: Registered protocol family 38 [ 0.440330] Key type asymmetric registered [ 0.440333] Asymmetric key parser 'x509' registered [ 0.440365] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.440395] io scheduler noop registered [ 0.440399] io scheduler deadline registered [ 0.440410] io scheduler cfq registered (default) [ 0.440763] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.440766] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.440778] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.440790] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.440793] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.440797] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.440801] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.440814] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.440825] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.440857] efifb: probing for efifb [ 0.440888] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 22500k, total 22500k [ 0.440892] efifb: mode is 3200x1800x32, linelength=12800, pages=1 [ 0.440894] efifb: scrolling: redraw [ 0.440896] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.449338] Console: switching to colour frame buffer device 400x112 [ 0.457312] fb0: EFI VGA frame buffer device [ 0.457331] intel_idle: MWAIT substates: 0x11142120 [ 0.457331] intel_idle: v0.4 model 0x3D [ 0.457332] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.458365] ACPI: AC Adapter [AC] (on-line) [ 0.458502] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.459166] ACPI: Lid Switch [LID0] [ 0.459214] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.459237] ACPI: Power Button [PBTN] [ 0.459269] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.459296] ACPI: Sleep Button [SBTN] [ 0.459331] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.459351] ACPI: Power Button [PWRF] [ 0.459371] evxface-0664 install_fixed_event_ha: Enabled fixed event PowerButton (2), Handler=ffffffff814c4e38 [ 0.460569] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.460587] ACPI: Thermal Zone [THM] (25 C) [ 0.463796] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.463815] ACPI: Thermal Zone [TZ00] (68 C) [ 0.466817] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.466836] ACPI: Thermal Zone [TZ01] (68 C) [ 0.483339] ACPI: Battery Slot [BAT0] (battery present) [ 0.483411] GHES: HEST is not enabled! [ 0.483472] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.483924] Non-volatile memory driver v1.3 [ 0.483965] Linux agpgart interface v0.103 [ 0.484031] [drm] Initialized drm 1.1.0 20060810 [ 0.484499] [drm] Memory usable by graphics device = 4096M [ 0.484518] checking generic (e0000000 15f9000) vs hw (e0000000 10000000) [ 0.484519] fb: switching to inteldrmfb from EFI VGA [ 0.484546] Console: switching to colour dummy device 80x25 [ 0.484630] [drm] Replacing VGA console driver [ 0.485078] [drm] ACPI BIOS requests an excessive sleep of 10000 ms, using 1500 ms instead [ 0.491249] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.491254] [drm] Driver supports precise vblank timestamp query. [ 0.491357] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.506276] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.516366] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 0.516396] fbcon: inteldrmfb (fb0) is primary device [ 0.516418] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0 [ 0.524522] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 0.524637] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 46 [ 0.527920] ahci 0000:00:1f.2: version 3.0 [ 0.528058] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.538391] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode [ 0.538393] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 0.538806] scsi host0: ahci [ 0.539037] scsi host1: ahci [ 0.539146] scsi host2: ahci [ 0.539233] scsi host3: ahci [ 0.539262] ata1: DUMMY [ 0.539263] ata2: DUMMY [ 0.539263] ata3: DUMMY [ 0.539264] ata4: SATA max UDMA/133 abar m2048@0xf721e000 port 0xf721e280 irq 47 [ 0.539344] libphy: Fixed MDIO Bus: probed [ 0.539345] tun: Universal TUN/TAP device driver, 1.6 [ 0.539346] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.539411] usbcore: registered new interface driver r8152 [ 0.539418] usbcore: registered new interface driver cdc_ether [ 0.539588] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.539619] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.539684] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.539688] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.539785] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.539786] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.539787] usb usb1: Product: xHCI Host Controller [ 0.539788] usb usb1: Manufacturer: Linux 4.0.0+ xhci-hcd [ 0.539788] usb usb1: SerialNumber: 0000:00:14.0 [ 0.539886] hub 1-0:1.0: USB hub found [ 0.539900] hub 1-0:1.0: 11 ports detected [ 0.543726] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.543756] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.543775] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.543776] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.543777] usb usb2: Product: xHCI Host Controller [ 0.543777] usb usb2: Manufacturer: Linux 4.0.0+ xhci-hcd [ 0.543778] usb usb2: SerialNumber: 0000:00:14.0 [ 0.543844] hub 2-0:1.0: USB hub found [ 0.543849] hub 2-0:1.0: 4 ports detected [ 0.545200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.545204] ehci-pci: EHCI PCI platform driver [ 0.545212] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.545214] ohci-pci: OHCI PCI platform driver [ 0.545220] uhci_hcd: USB Universal Host Controller Interface driver [ 0.545245] usbcore: registered new interface driver usb-storage [ 0.545262] usbcore: registered new interface driver usbserial [ 0.545266] usbcore: registered new interface driver usbserial_generic [ 0.545269] usbserial: USB Serial support registered for generic [ 0.545274] usbcore: registered new interface driver ftdi_sio [ 0.545278] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.545305] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.545887] i8042: Warning: Keylock active [ 0.548227] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.548230] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.548300] mousedev: PS/2 mouse device common for all mice [ 0.548491] evxface-0664 install_fixed_event_ha: Enabled fixed event RealTimeClock (4), Handler=ffffffff81781a70 [ 0.548494] rtc_cmos 00:01: RTC can wake from S4 [ 0.548620] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.548653] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.548744] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254) [ 0.548745] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.548773] usbcore: registered new interface driver uvcvideo [ 0.548773] USB Video Class driver (1.1.1) [ 0.549856] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.551457] ACPI Warning: \_SB_.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20150410/nspredef-297) [ 0.551461] ACPI: Invalid package element [0]: got number, expecting [R] [ 0.585299] _ART package 0 is invalid, ignored [ 0.585299] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 0.605544] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 0.605582] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 0.605671] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 0.605690] iTCO_vendor_support: vendor-support=0 [ 0.605742] device-mapper: uevent: version 1.0.3 [ 0.605858] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com [ 0.605959] usbcore: registered new interface driver btusb [ 0.605970] Intel P-state driver initializing. [ 0.606125] sdhci: Secure Digital Host Controller Interface driver [ 0.606126] sdhci: Copyright(c) Pierre Ossman [ 0.609747] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 0.609760] EFI Variables Facility v0.08 2004-May-17 [ 0.612861] hidraw: raw HID events driver (C) Jiri Kosina [ 0.613211] usbcore: registered new interface driver usbhid [ 0.613212] usbhid: USB HID core driver [ 1.051811] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 1.216763] usb 1-3: No LPM exit latency info found, disabling LPM. [ 1.217993] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2a [ 1.217995] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.233715] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 1.233745] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2 [ 1.233747] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-2) [ 1.233780] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2 [ 1.233781] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.8.bseq [ 1.371953] usb 1-4: new full-speed USB device number 3 using xhci_hcd [ 1.434985] tsc: Refined TSC clocksource calibration: 2593.995 MHz [ 1.434987] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x256413873f2, max_idle_ns: 440795261455 ns [ 1.537920] usb 1-4: New USB device found, idVendor=04f3, idProduct=20d0 [ 1.537921] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 1.537922] usb 1-4: Product: Touchscreen [ 1.537923] usb 1-4: Manufacturer: ELAN [ 1.538095] usb 1-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.546130] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0001/input/input8 [ 1.546264] hid-multitouch 0003:04F3:20D0.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0 [ 1.600038] Console: switching to colour frame buffer device 400x112 [ 1.615017] i2c_designware INT3433:00: controller timed out [ 1.642496] i2c_designware INT3433:00: timeout in disabling adapter [ 1.642500] i2c_hid i2c-DLL0665:01: hid_descr_cmd failed [ 1.652393] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.653669] i915 0000:00:02.0: registered panic notifier [ 1.657621] input: Dell WMI hotkeys as /devices/virtual/input/input10 [ 1.659594] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 1.661087] drop_monitor: Initializing network drop monitor service [ 1.662378] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 1.663952] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.665299] Initializing XFRM netlink socket [ 1.666650] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops) [ 1.666726] NET: Registered protocol family 10 [ 1.666901] mip6: Mobile IPv6 [ 1.666906] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.672119] NET: Registered protocol family 17 [ 1.673485] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.674871] Ebtables v2.0 registered [ 1.676651] Loading compiled-in X.509 certificates [ 1.678662] Loaded X.509 cert 'Magrathea: Glacier signing key: fc047a540e21515ad039688bb8a1cf32a880e5c8' [ 1.680120] registered taskstats version 1 [ 1.682000] rtc_cmos 00:01: setting system clock to 2015-07-27 15:51:34 UTC (1438012294) [ 1.683519] ALSA device list: [ 1.684925] #0: HDA Intel HDMI at 0xf7218000 irq 49 [ 1.702062] usb 1-5: new high-speed USB device number 4 using xhci_hcd [ 1.892483] usb 1-5: New USB device found, idVendor=0bda, idProduct=5682 [ 1.894130] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.895492] usb 1-5: Product: Integrated_Webcam_HD [ 1.896871] usb 1-5: Manufacturer: CKFEH41F301030009340 [ 1.898226] usb 1-5: SerialNumber: 200901010001 [ 1.902918] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5682) [ 1.909242] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input11 [ 1.968309] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.972008] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.972011] ata4.00: ATA-9: SAMSUNG SSD PM851 M.2 2280 256GB, EXT25D0Q, max UDMA/133 [ 1.973710] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.975486] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.975522] ata4.00: configured for UDMA/133 [ 1.977107] scsi 3:0:0:0: Direct-Access ATA SAMSUNG SSD PM85 5D0Q PQ: 0 ANSI: 5 [ 1.978900] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.978921] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 1.981915] sd 3:0:0:0: [sda] Write Protect is off [ 1.983332] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.983339] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.987695] sda: sda1 sda2 sda3 [ 1.989829] sd 3:0:0:0: [sda] Attached SCSI disk [ 1.991608] Freeing unused kernel memory: 1680K (ffffffff823af000 - ffffffff82553000) [ 1.993274] Write protecting the kernel read-only data: 18432k [ 1.994928] Freeing unused kernel memory: 508K (ffff880001b81000 - ffff880001c00000) [ 1.996592] Freeing unused kernel memory: 1244K (ffff8800020c9000 - ffff880002200000) [ 2.002650] random: systemd urandom read with 29 bits of entropy available [ 2.004985] systemd[1]: systemd 216 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.006647] systemd[1]: Detected architecture 'x86-64'. [ 2.008206] systemd[1]: Running in initial RAM disk. [ 2.014693] systemd[1]: Set hostname to <mfleming-mobl1.ger.corp.intel.com>. [ 2.038356] systemd[1]: Expecting device dev-disk-by\x2duuid-AF27\x2d22C8.device... [ 2.041584] systemd[1]: Expecting device dev-mapper-fedora\x2dswap.device... [ 2.044757] systemd[1]: Expecting device dev-disk-by\x2duuid-e75ed791\x2dd3e4\x2d480d\x2daa9f\x2d499f34a15b23.device... [ 2.047949] systemd[1]: Expecting device dev-mapper-fedora\x2droot.device... [ 2.051141] systemd[1]: Starting Timers. [ 2.054265] systemd[1]: Reached target Timers. [ 2.055784] systemd[1]: Expecting device dev-disk-by\x2duuid-26312b50\x2dd793\x2d4686\x2da576\x2d28b32bee5a21.device... [ 2.058904] systemd[1]: Expecting device dev-mapper-luks\x2d26312b50\x2dd793\x2d4686\x2da576\x2d28b32bee5a21.device... [ 2.062025] systemd[1]: Starting -.slice. [ 2.068733] systemd[1]: Created slice -.slice. [ 2.070254] systemd[1]: Starting udev Control Socket. [ 2.073413] systemd[1]: Listening on udev Control Socket. [ 2.074935] systemd[1]: Starting udev Kernel Socket. [ 2.078041] systemd[1]: Listening on udev Kernel Socket. [ 2.079563] systemd[1]: Starting Journal Socket. [ 2.082673] systemd[1]: Listening on Journal Socket. [ 2.084168] systemd[1]: Starting System Slice. [ 2.087326] systemd[1]: Created slice System Slice. [ 2.088852] systemd[1]: Started dracut ask for additional cmdline parameters. [ 2.090388] systemd[1]: Starting dracut cmdline hook... [ 2.093775] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 2.097070] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.098659] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.102098] systemd[1]: Starting system-systemd\x2dcryptsetup.slice. [ 2.105677] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 2.107234] systemd[1]: Starting Journal Socket (/dev/log). [ 2.109025] systemd[1]: Starting Slices. [ 2.112524] systemd[1]: Reached target Slices. [ 2.114056] systemd[1]: Starting Setup Virtual Console... [ 2.117516] systemd[1]: Started Load Kernel Modules. [ 2.119050] systemd[1]: Starting Apply Kernel Variables... [ 2.133907] systemd[1]: Starting Swap. [ 2.137874] systemd[1]: Reached target Swap. [ 2.139535] systemd[1]: Starting Local File Systems. [ 2.143615] systemd[1]: Reached target Local File Systems. [ 2.147955] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 2.152059] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.155659] systemd[1]: Started Apply Kernel Variables. [ 2.160456] systemd[1]: Starting Sockets. [ 2.164560] systemd[1]: Reached target Sockets. [ 2.166545] systemd[1]: Starting Journal Service... [ 2.170929] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.179945] systemd[1]: Started Create Static Device Nodes in /dev. [ 2.187594] systemd[1]: Started Setup Virtual Console. [ 2.194946] systemd[1]: Started dracut cmdline hook. [ 2.196958] systemd[1]: Starting dracut pre-udev hook... [ 2.203746] systemd[1]: Started Journal Service. [ 2.435707] Switched to clocksource tsc [ 2.752647] i2c_designware INT3433:00: timeout in disabling adapter [ 3.364162] cfg80211: Calling CRDA to update world regulatory domain [ 6.518099] cfg80211: Calling CRDA to update world regulatory domain [ 9.672062] cfg80211: Calling CRDA to update world regulatory domain [ 12.195548] random: nonblocking pool is initialized [ 12.826017] cfg80211: Calling CRDA to update world regulatory domain [ 13.635457] psmouse serio1: Failed to deactivate mouse on isa0060/serio1 [ 14.110759] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 15.979827] cfg80211: Calling CRDA to update world regulatory domain [ 17.254897] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 17.509043] systemd-journald[291]: Received SIGTERM from PID 1 (systemd). [ 17.548446] audit: type=1404 audit(1438012310.355:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 17.565597] SELinux: 32768 avtab hash slots, 105179 rules. [ 17.576835] SELinux: 32768 avtab hash slots, 105179 rules. [ 17.596012] SELinux: 8 users, 103 roles, 4998 types, 294 bools, 1 sens, 1024 cats [ 17.596014] SELinux: 83 classes, 105179 rules [ 17.598883] SELinux: Permission audit_read in class capability2 not defined in policy. [ 17.600077] SELinux: Class binder not defined in policy. [ 17.601246] SELinux: the above unknown classes and permissions will be allowed [ 17.602424] SELinux: Completing initialization. [ 17.602425] SELinux: Setting up existing superblocks. [ 17.607981] audit: type=1403 audit(1438012310.415:3): policy loaded auid=4294967295 ses=4294967295 [ 17.612556] systemd[1]: Successfully loaded SELinux policy in 65.760ms. [ 17.624119] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 17.642871] systemd[1]: Relabelled /dev and /run in 13.795ms. [ 17.869285] EXT4-fs (dm-2): re-mounted. Opts: (null) [ 17.897255] systemd-journald[781]: Received request to flush runtime journal from PID 1 [ 18.200492] Intel(R) Wireless WiFi driver for Linux [ 18.202781] Copyright(c) 2003- 2015 Intel Corporation [ 18.202998] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 18.204283] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-13.ucode failed with error -2 [ 18.207012] sst-acpi INT3438:00: DesignWare DMA Controller, 8 channels [ 18.212887] iwlwifi 0000:02:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm [ 18.228318] (NULL device *): Direct firmware load for intel/IntcPP01.bin failed with error -2 [ 18.228320] (NULL device *): fw image intel/IntcPP01.bin not available(-2) [ 18.228922] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [ 18.258535] Adding 8126460k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:8126460k SSFS [ 18.302549] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 18.315282] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7 [ 18.331243] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 18.342020] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 18.344128] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 18.345945] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 18.409814] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 18.420331] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 18.427141] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 18.442653] cfg80211: Calling CRDA to update world regulatory domain [ 18.455127] cfg80211: World regulatory domain updated: [ 18.456705] cfg80211: DFS Master region: unset [ 18.456717] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 18.459866] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 18.461412] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 18.463120] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 18.464622] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 18.466151] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 18.467708] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 18.469180] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 18.470776] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 18.517384] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 18.528393] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x40000000 isr 0x00000001 ipcd 0x20011b93 imrx 0x7fff0000 [ 18.530053] (NULL device *): error: get version failed [ 18.831556] haswell-pcm-audio haswell-pcm-audio: ipc: --message timeout-- ipcx 0x40000000 isr 0x00000001 ipcd 0x20011b93 imrx 0x7fff0000 [ 18.833569] (NULL device *): error: get stream info failed [ 18.835660] (NULL device *): error: failed to get stream info [ 18.848914] ------------[ cut here ]------------ [ 18.850431] kernel BUG at /home/matt/src/kernels/efi/mm/slub.c:3413! [ 18.851972] invalid opcode: 0000 [#1] SMP [ 18.853505] Modules linked in: iwlmvm iwlwifi snd_soc_sst_haswell_pcm(+) snd_soc_sst_ipc snd_soc_sst_dsp snd_soc_rt286(+) snd_soc_sst_acpi [ 18.855077] CPU: 0 PID: 830 Comm: systemd-udevd Not tainted 4.0.0+ #61 [ 18.856642] Hardware name: Dell Inc. XPS 13 9343/0F5KF3, BIOS A00 11/04/2014 [ 18.858204] task: ffff88020fc1b900 ti: ffff88020fc80000 task.ti: ffff88020fc80000 [ 18.859859] RIP: 0010:[<ffffffff81231102>] [<ffffffff81231102>] kfree+0x152/0x160 [ 18.861471] RSP: 0018:ffff88020fc83a98 EFLAGS: 00010246 [ 18.863044] RAX: 005ffc0000000000 RBX: ffff880212910000 RCX: 0000000000007dff [ 18.864640] RDX: 000077ff80000000 RSI: ffff880212910028 RDI: ffff880212910000 [ 18.866671] RBP: ffff88020fc83ab8 R08: 0000000000019c60 R09: ffffea00084a4400 [ 18.868270] R10: ffffffff816621ed R11: ffff8800d9cf5a20 R12: ffff88020fc83af0 [ 18.869804] R13: ffffffff816621ed R14: 0000000000000004 R15: ffff8800daaf1000 [ 18.871339] FS: 00007f273d54f880(0000) GS:ffff88021e400000(0000) knlGS:0000000000000000 [ 18.872885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 18.874419] CR2: 00007f273d3f3000 CR3: 000000020fc8f000 CR4: 00000000003407f0 [ 18.875949] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 18.877468] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 18.878969] Stack: [ 18.880464] ffff8800daaf1028 ffff8800daaf1000 ffff88020fc83af0 ffff8800d8911410 [ 18.881955] ffff88020fc83b38 ffffffff816621ed 0000000000000286 ffff8800d8911668 [ 18.883457] ffff880000000000 ffff8800d8911668 ffff8802131d8480 ffff8800daaf1000 [ 18.884934] Call Trace: [ 18.886429] [<ffffffff816621ed>] release_nodes+0x14d/0x260 [ 18.887920] [<ffffffff81662410>] devres_release_all+0x40/0x70 [ 18.889414] [<ffffffff8165dc98>] driver_probe_device+0xc8/0x4b0 [ 18.890913] [<ffffffff8165e15b>] __driver_attach+0x9b/0xa0 [ 18.892402] [<ffffffff8165e0c0>] ? __device_attach+0x40/0x40 [ 18.893888] [<ffffffff8165b8f3>] bus_for_each_dev+0x73/0xc0 [ 18.895374] [<ffffffff8165d6ae>] driver_attach+0x1e/0x20 [ 18.896857] [<ffffffff8165d260>] bus_add_driver+0x180/0x250 [ 18.898342] [<ffffffffa0062964>] ? ftrace_define_fields_hsw_device_config_req+0xc6/0xc6 [snd_soc_sst_haswell_pcm] [ 18.899858] [<ffffffff8165e954>] driver_register+0x64/0xf0 [ 18.901342] [<ffffffff8165fffa>] __platform_driver_register+0x4a/0x50 [ 18.902839] [<ffffffffa006297b>] hsw_pcm_driver_init+0x17/0x69c [snd_soc_sst_haswell_pcm] [ 18.904342] [<ffffffff81000318>] do_one_initcall+0xd8/0x210 [ 18.905840] [<ffffffff81214e02>] ? __vunmap+0xa2/0x100 [ 18.907328] [<ffffffff812325c9>] ? kmem_cache_alloc_trace+0x1a9/0x230 [ 18.908820] [<ffffffff81b6b624>] ? do_init_module+0x28/0x1cc [ 18.910334] [<ffffffff81b6b65d>] do_init_module+0x61/0x1cc [ 18.911838] [<ffffffff811631eb>] load_module+0x20cb/0x2540 [ 18.913313] [<ffffffff8115ead0>] ? store_uevent+0x70/0x70 [ 18.914779] [<ffffffff812562e0>] ? kernel_read+0x50/0x80 [ 18.916234] [<ffffffff81163886>] SyS_finit_module+0xa6/0xe0 [ 18.917684] [<ffffffff81b762ee>] system_call_fastpath+0x12/0x71 [ 18.919130] Code: 00 4d 8b 49 30 e9 35 ff ff ff 0f 1f 80 00 00 00 00 4c 89 d1 48 89 da 4c 89 ce e8 ea f9 ff ff e9 73 ff ff ff 0f 1f 44 00 00 0f 0b <0f> 0b 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 89 [ 18.920682] RIP [<ffffffff81231102>] kfree+0x152/0x160 [ 18.922160] RSP <ffff88020fc83a98> [ 18.923664] ---[ end trace 1fdbf340cd8718a0 ]--- [ 19.056710] i2c_designware INT3432:00: controller timed out [ 19.059155] rt286 i2c-INT343A:00: I2C error -110 [ 19.073730] rt286: probe of i2c-INT343A:00 failed with error -110 [ 198.267302] audit: type=1305 audit(1438008890.963:4): audit_pid=934 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 [ 198.582308] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 198.584423] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 199.593932] device virbr0-nic entered promiscuous mode [ 199.608470] virbr0: port 1(virbr0-nic) entered forwarding state [ 199.608480] virbr0: port 1(virbr0-nic) entered forwarding state [ 199.825141] virbr0: port 1(virbr0-nic) entered disabled state [ 205.479221] wlp2s0: authenticate with 7c:03:4c:71:c8:61 [ 205.482283] wlp2s0: send auth to 7c:03:4c:71:c8:61 (try 1/3) [ 205.484861] wlp2s0: authenticated [ 205.485990] wlp2s0: associate with 7c:03:4c:71:c8:61 (try 1/3) [ 205.491045] wlp2s0: RX AssocResp from 7c:03:4c:71:c8:61 (capab=0x411 status=0 aid=2) [ 205.491675] wlp2s0: associated [-- Attachment #3: dmesg.good --] [-- Type: text/plain, Size: 98644 bytes --] [ 0.000000] microcode: CPU0 microcode updated early to revision 0x18, date = 2014-12-05 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.0.0+ (matt@mfleming-mobl1.ger.corp.intel.com) (gcc version 4.9.2 20150212 (Red Hat 4.9.2-6) (GCC) ) #60 SMP Sun Jul 26 14:59:58 BST 2015 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.0.0+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rd.luks.uuid=luks-26312b50-d793-4686-a576-28b32bee5a21 LANG=en_GB.UTF-8 acpi.debug_level=0x00002425 acpi.debug_layer=0xe [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c6443fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c6444000-0x00000000c68e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c68e3000-0x00000000dadbefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dadbf000-0x00000000dae7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae80000-0x00000000daeacfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000daead000-0x00000000db7f8fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db7f9000-0x00000000dbafdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbafe000-0x00000000dbafefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xc4a7d018-0xc4a8d057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c4a7d017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c4a7d018-0x00000000c4a8d057] usable [ 0.000000] reserve setup_data: [mem 0x00000000c4a8d058-0x00000000c6443fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c6444000-0x00000000c68e2fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c68e3000-0x00000000dadbefff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dadbf000-0x00000000dae7ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dae80000-0x00000000daeacfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000daead000-0x00000000db7f8fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000db7f9000-0x00000000dbafdfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dbafe000-0x00000000dbafefff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dd000000-0x00000000df7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021e7fffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xdae89000 ACPI 2.0=0xdae89000 SMBIOS=0xf0000 [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. XPS 13 9343/0F5KF3, BIOS A00 11/04/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21e800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7FF0000000 write-back [ 0.000000] 2 base 0210000000 mask 7FF8000000 write-back [ 0.000000] 3 base 0218000000 mask 7FFC000000 write-back [ 0.000000] 4 base 021C000000 mask 7FFE000000 write-back [ 0.000000] 5 base 021E000000 mask 7FFF800000 write-back [ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 7 base 00DE000000 mask 7FFE000000 uncachable [ 0.000000] 8 base 00DD000000 mask 7FFF000000 uncachable [ 0.000000] 9 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdbaff max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02688000, 0x02688fff] PGTABLE [ 0.000000] BRK [0x02689000, 0x02689fff] PGTABLE [ 0.000000] BRK [0x0268a000, 0x0268afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x21e600000-0x21e7fffff] [ 0.000000] [mem 0x21e600000-0x21e7fffff] page 2M [ 0.000000] BRK [0x0268b000, 0x0268bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21e5fffff] [ 0.000000] [mem 0x200000000-0x21e5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff] [ 0.000000] [mem 0x1e0000000-0x1ffffffff] page 1G [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc6443fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xc63fffff] page 2M [ 0.000000] [mem 0xc6400000-0xc6443fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xc68e3000-0xdadbefff] [ 0.000000] [mem 0xc68e3000-0xc69fffff] page 4k [ 0.000000] [mem 0xc6a00000-0xdabfffff] page 2M [ 0.000000] [mem 0xdac00000-0xdadbefff] page 4k [ 0.000000] BRK [0x0268c000, 0x0268cfff] PGTABLE [ 0.000000] BRK [0x0268d000, 0x0268dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdbafe000-0xdbafefff] [ 0.000000] [mem 0xdbafe000-0xdbafefff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff] [ 0.000000] [mem 0x100000000-0x1dfffffff] page 1G [ 0.000000] RAMDISK: [mem 0x3ee0d000-0x3fffafff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DAE89000 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000DAE890C0 000104 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DAE9C640 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DAE89258 0133E2 (v02 DELL CBX3 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DB7F6F80 000040 [ 0.000000] ACPI: APIC 0x00000000DAE9C750 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DAE9C7D8 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DAE9C820 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DAE9C8C0 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DAE9C900 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DAE9C938 000455 (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000DAE9CD90 000042 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000DAE9CDD8 0004A7 (v02 Intel_ Tpm2Tabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAE9D280 00004B (v02 MeSsdt MeSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: TPM2 0x00000000DAE9D2D0 000034 (v03 00000000 00000000) [ 0.000000] ACPI: LPIT 0x00000000DAE9D308 000094 (v01 00000000 00000000) [ 0.000000] ACPI: SSDT 0x00000000DAE9D3A0 002402 (v02 AcpiRe Ult0Rtd3 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAE9F7A8 000CDB (v02 Ther_R Ther_Rvp 00001000 INTL 20120913) [ 0.000000] ACPI: ASF! 0x00000000DAEA0488 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x00000000DAEA0528 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA0A48 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA15C0 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA1788 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913) [ 0.000000] ACPI: PCCT 0x00000000DAEA1B30 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA1BA0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA2668 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DAEA6818 004646 (v01 DptfTa DptfTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SLIC 0x00000000DAEAAE60 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: MSDM 0x00000000DAEAAFD8 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: DMAR 0x00000000DAEAB030 0000F0 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.000000] ACPI: CSRT 0x00000000DAEAB120 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528) [ 0.000000] ACPI: BGRT 0x00000000DAEAB1E8 000038 (v00 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21e7e9000-0x21e7fcfff] [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215e00000-ffff88021ddfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021e7fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c6443fff] [ 0.000000] node 0: [mem 0x00000000c68e3000-0x00000000dadbefff] [ 0.000000] node 0: [mem 0x00000000dbafe000-0x00000000dbafefff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021e7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e7fffff] [ 0.000000] On node 0 totalpages: 2068669 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13925 pages used for memmap [ 0.000000] DMA32 zone: 891169 pages, LIFO batch:31 [ 0.000000] Normal zone: 18336 pages used for memmap [ 0.000000] Normal zone: 1173504 pages, LIFO batch:31 [ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED [ 0.000000] Reserving Intel graphics stolen memory at 0xdd800000-0xdf7fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x48]) [ 0.000000] ACPI: NMI not connected to LINT 1! [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc4a7d000-0xc4a7dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc4a8d000-0xc4a8dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc6444000-0xc68e2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdadbf000-0xdae7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae80000-0xdaeacfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaead000-0xdb7f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb7f9000-0xdbafdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdbaff000-0xdcffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88021e400000 s97048 r8192 d29928 u524288 [ 0.000000] pcpu-alloc: s97048 r8192 d29928 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2036323 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.0.0+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rd.luks.uuid=luks-26312b50-d793-4686-a576-28b32bee5a21 LANG=en_GB.UTF-8 acpi.debug_level=0x00002425 acpi.debug_layer=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] Memory: 7680852K/8274676K available (11763K kernel code, 1718K rwdata, 4900K rodata, 1680K init, 1192K bss, 593824K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:728 16 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-3. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2594.150 MHz processor [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.30 BogoMIPS (lpj=2594150) [ 0.000027] pid_max: default: 32768 minimum: 301 [ 0.000032] ACPI: Core revision 20150410 [ 0.025826] ACPI: All ACPI Tables successfully acquired [ 0.026875] hwacpi-0107 hw_set_mode : Attempting to enable ACPI mode [ 0.027500] Security Framework initialized [ 0.027506] SELinux: Initializing. [ 0.027514] SELinux: Starting in permissive mode [ 0.027916] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.029174] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.029715] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.029725] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.029894] Initializing cgroup subsys blkio [ 0.029898] Initializing cgroup subsys memory [ 0.029904] Initializing cgroup subsys devices [ 0.029908] Initializing cgroup subsys freezer [ 0.029910] Initializing cgroup subsys net_cls [ 0.029913] Initializing cgroup subsys perf_event [ 0.029916] Initializing cgroup subsys net_prio [ 0.029918] Initializing cgroup subsys hugetlb [ 0.029940] CPU: Physical Processor ID: 0 [ 0.029942] CPU: Processor Core ID: 0 [ 0.029946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.029948] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.030832] mce: CPU supports 7 MCE banks [ 0.030844] CPU0: Thermal monitoring enabled (TM1) [ 0.030852] process: using mwait in idle threads [ 0.030856] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.030858] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.031227] Freeing SMP alternatives memory: 36K (ffffffff82553000 - ffffffff8255c000) [ 0.040872] ftrace: allocating 40204 entries in 158 pages [ 0.055016] dmar: Host address width 39 [ 0.055020] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.055029] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.055033] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.055039] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.055042] dmar: RMRR base: 0x000000db9e5000 end: 0x000000db9f3fff [ 0.055045] dmar: RMRR base: 0x000000dd000000 end: 0x000000df7fffff [ 0.055047] dmar: ANDD device: 1 name: \_SB.PCI0.SDMA [ 0.055049] dmar: ANDD device: 3 name: \_SB.PCI0.ADSP [ 0.055052] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.055054] HPET id 0 under DRHD base 0xfed91000 [ 0.055422] Your BIOS is broken and requested that x2apic be disabled. This will slightly decrease performance. Use 'intremap=no_x2apic_optout' to override BIOS request. [ 0.055438] Enabled IRQ remapping in xapic mode [ 0.055440] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.056068] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066081] TSC deadline timer enabled [ 0.066083] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (fam: 06, model: 3d, stepping: 04) [ 0.066107] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver. [ 0.066125] ... version: 3 [ 0.066127] ... bit width: 48 [ 0.066128] ... generic registers: 4 [ 0.066130] ... value mask: 0000ffffffffffff [ 0.066132] ... max period: 0000ffffffffffff [ 0.066134] ... fixed-purpose events: 3 [ 0.066136] ... event mask: 000000070000000f [ 0.066968] x86: Booting SMP configuration: [ 0.066971] .... node #0, CPUs: #1 [ 0.078735] microcode: CPU1 microcode updated early to revision 0x18, date = 2014-12-05 [ 0.081750] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.081816] #2 #3 [ 0.110158] x86: Booted up 1 node, 4 CPUs [ 0.110163] smpboot: Total of 4 processors activated (20753.20 BogoMIPS) [ 0.113712] devtmpfs: initialized [ 0.115292] PM: Registering ACPI NVS region [mem 0xdaead000-0xdb7f8fff] (9748480 bytes) [ 0.115430] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.115490] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.115494] pinctrl core: initialized pinctrl subsystem [ 0.115596] NET: Registered protocol family 16 [ 0.118575] cpuidle: using governor menu [ 0.118647] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.118652] ACPI: bus type PCI registered [ 0.118654] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.118701] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.118706] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.118775] PCI: Using configuration type 1 for base access [ 0.118782] dmi type 0xB1 record - unknown flag [ 0.123843] ACPI: Added _OSI(Module Device) [ 0.123846] ACPI: Added _OSI(Processor Device) [ 0.123848] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.123851] ACPI: Added _OSI(Processor Aggregator Device) [ 0.126117] Initializing General Purpose Events (GPEs): [ 0.126162] Initialized GPE 00 to 7F [_GPE] 16 regs on interrupt 0x9 (SCI) [ 0.126248] evxface-0664 install_fixed_event_ha: Enabled fixed event GlobalLock (1), Handler=ffffffff814dc413 [ 0.128455] Initializing Region \PNVA [ 0.128708] Initializing Region \GNVS [ 0.128984] Initializing Region \RCRB [ 0.129005] Initializing Region \_SB_.PCI0.LPCB.LPC_ [ 0.129670] Executing Method \_SB_.PCI0.SAT0._REG [ 0.130112] ACPI: Executed 17 blocks of module-level executable AML code [ 0.130506] Initializing Region \_PR_.PNVS [ 0.130523] Initializing Region \_PR_.IO_D [ 0.130538] Initializing Region \_PR_.IO_P [ 0.131408] Initializing Region \_SB_.PCI0.HBUS [ 0.131433] Initializing Region \_SB_.PCI0.B0D3.RPCS [ 0.131448] Initializing Region \SANV [ 0.131460] Initializing Region \_SB_.PCI0.B0D3.RPCZ [ 0.131473] Initializing Region \_SB_.PCI0.GFX0.PCS_ [ 0.131496] Initializing BufferField \_SB_.PCI0.GFX0.IVD6 [ 0.131505] Initializing BufferField \_SB_.PCI0.GFX0.IVD7 [ 0.131513] Initializing BufferField \_SB_.PCI0.GFX0.IVD8 [ 0.131521] Initializing BufferField \_SB_.PCI0.GFX0.VDP8 [ 0.131529] Initializing Region \_SB_.PCI0.GFX0.IGDP [ 0.131537] Initializing Region \_SB_.PCI0.GFX0.IGDM [ 0.131619] Initializing Region \_SB_.PCI0.B0D4.MBAR [ 0.131794] Initializing Region \_SB_.PCI0.PEG0.PEGP.PCIS [ 0.131803] Initializing Region \_SB_.PCI0.PEG0.PEGR [ 0.131833] Initializing Region \_SB_.PCI0.PEG1.PEGP.PCIS [ 0.131841] Initializing Region \_SB_.PCI0.PEG1.PEGR [ 0.131869] Initializing Region \_SB_.PCI0.PEG2.PEGP.PCIS [ 0.131877] Initializing Region \_SB_.PCI0.PEG2.PEGR [ 0.131906] Initializing Region \_SB_.PCI0.RP01.PXCS [ 0.131928] Initializing Region \_SB_.PCI0.RP02.PXCS [ 0.131945] Initializing Region \_SB_.PCI0.RP02.PXSX.PCCX [ 0.131954] Initializing Region \_SB_.PCI0.RP03.PXCS [ 0.131970] Initializing Region \_SB_.PCI0.RP03.PXSX.PCCX [ 0.131979] Initializing Region \_SB_.PCI0.RP04.PXCS [ 0.131996] Initializing Region \_SB_.PCI0.RP04.PXSX.PCCX [ 0.132009] Initializing Region \_SB_.PCI0.RP05.PXCS [ 0.132027] Initializing Region \_SB_.PCI0.RP06.PXCS [ 0.132044] Initializing Region \_SB_.PCI0.RP06.PXSX.PCCX [ 0.132053] Initializing Region \_SB_.PCI0.RP07.PXCS [ 0.132070] Initializing Region \_SB_.PCI0.RP07.PXSX.PCCX [ 0.132079] Initializing Region \_SB_.PCI0.RP08.PXCS [ 0.132095] Initializing Region \_SB_.PCI0.RP08.PXSX.PCCX [ 0.132104] Initializing Region \_SB_.PCI0.LPCB.SMIE [ 0.132117] Initializing Region \_SB_.PCI0.LPCB.SLPR [ 0.132129] Initializing Region \_SB_.PCI0.LPCB.CPSB [ 0.132143] Initializing Region \_SB_.PCI0.LPCB.LPCR [ 0.132193] Initializing Region \_SB_.PCI0.LPCB.ECDV.ECOR [ 0.132270] Initializing Region \_SB_.PCI0.GLAN.GLBA [ 0.132278] Initializing Region \_SB_.PCI0.EHC1.PWCS [ 0.132286] Initializing Region \_SB_.PCI0.EHC1.PWKE [ 0.132302] Initializing Region \_SB_.PCI0.EHC2.PWCS [ 0.132309] Initializing Region \_SB_.PCI0.EHC2.PWKE [ 0.132324] Initializing Region \_SB_.PCI0.XHC_.XPRT [ 0.132333] Initializing Region \_SB_.PCI0.XHC_.XHCP [ 0.132359] Initializing Region \_SB_.PCI0.XHC_.PWCS [ 0.132666] Initializing BufferField \_SB_.PCI0.GPI0.BMIN [ 0.132675] Initializing BufferField \_SB_.PCI0.GPI0.BMAX [ 0.132759] Initializing Region \_SB_.PCI0.HDEF.HDAR [ 0.132813] Initializing BufferField \_SB_.PCI0.ADSP.B0VL [ 0.132821] Initializing BufferField \_SB_.PCI0.ADSP.B1VL [ 0.132829] Initializing BufferField \_SB_.PCI0.ADSP.IRQN [ 0.132852] Initializing BufferField \_SB_.PCI0.SAT0.PIO0 [ 0.132860] Initializing BufferField \_SB_.PCI0.SAT0.DMA0 [ 0.132868] Initializing BufferField \_SB_.PCI0.SAT0.PIO1 [ 0.132876] Initializing BufferField \_SB_.PCI0.SAT0.DMA1 [ 0.132883] Initializing BufferField \_SB_.PCI0.SAT0.CHNF [ 0.132894] Initializing Region \_SB_.PCI0.SBUS.SMBP [ 0.132902] Initializing Region \_SB_.PCI0.SBUS.SMPB [ 0.132909] Initializing Region \_SB_.PCI0.SBUS.SMBI [ 0.132937] Initializing Region \_SB_.PCI0.MCHP [ 0.132994] Initializing Region \_SB_.PCI0.TPCH.PCHT [ 0.133615] Initializing Region \_SB_.RTCO [ 0.133630] Initializing Region \_SB_.TPMI.SMIP [ 0.133638] Initializing Region \_SB_.TPMI.FHCI [ 0.133645] Initializing Region \_SB_.TPMI.TNVS [ 0.134112] Initializing Region \EXBU [ 0.134121] Initializing Region \DEGA [ 0.134170] Initializing Region \PMIO [ 0.134207] Initializing Region \LGPE [ 0.134235] Initializing Region \GPR_ [ 0.134275] Initializing Region \GPRL [ 0.134307] Initializing Region \PRT0 [ 0.134314] Initializing Region \SPRT [ 0.134325] Initializing Region \USBD [ 0.134332] Initializing Region \UBLK [ 0.134340] Initializing Region \MBAR [ 0.134366] Initializing Region \IO_H [ 0.134438] Initializing Region \ABNV [ 0.134515] Initializing Region \MENV [ 0.134630] Executing Method \_SB_._STA [ 0.134634] Executing Method \_SB_._INI [ 0.134641] Executing Method \_SB_.PCI0._STA [ 0.134645] Executing Method \_SB_.PCI0._INI [ 0.135975] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.137603] Executing Method \_SB_.PCI0.B0D3._STA [ 0.137627] Executing Method \_SB_.PCI0.B0D3._INI [ 0.137661] Executing Method \_SB_.PCI0.PEG0._STA [ 0.137664] Executing Method \_SB_.PCI0.PEG0._INI [ 0.137694] Executing Method \_SB_.PCI0.PEG1._STA [ 0.137697] Executing Method \_SB_.PCI0.PEG1._INI [ 0.137726] Executing Method \_SB_.PCI0.PEG2._STA [ 0.137729] Executing Method \_SB_.PCI0.PEG2._INI [ 0.137758] Executing Method \_SB_.PCI0.RP01._STA [ 0.137761] Executing Method \_SB_.PCI0.RP01._INI [ 0.137800] Executing Method \_SB_.PCI0.RP02._STA [ 0.137803] Executing Method \_SB_.PCI0.RP02._INI [ 0.137844] Executing Method \_SB_.PCI0.RP03._STA [ 0.137847] Executing Method \_SB_.PCI0.RP03._INI [ 0.137884] Executing Method \_SB_.PCI0.RP04._STA [ 0.137888] Executing Method \_SB_.PCI0.RP04._INI [ 0.137926] Executing Method \_SB_.PCI0.RP05._STA [ 0.137929] Executing Method \_SB_.PCI0.RP05._INI [ 0.137966] Executing Method \_SB_.PCI0.RP06._STA [ 0.137969] Executing Method \_SB_.PCI0.RP06._INI [ 0.138006] Executing Method \_SB_.PCI0.RP07._STA [ 0.138009] Executing Method \_SB_.PCI0.RP07._INI [ 0.138046] Executing Method \_SB_.PCI0.RP08._STA [ 0.138049] Executing Method \_SB_.PCI0.RP08._INI [ 0.138086] Executing Method \_SB_.PCI0.XHC_._STA [ 0.138090] Executing Method \_SB_.PCI0.XHC_._INI [ 0.138094] Executing Method \_SB_.PCI0.XHC_.RHUB._STA [ 0.138097] Executing Method \_SB_.PCI0.XHC_.RHUB._INI [ 0.138110] Executing Method \_SB_.PCI0.I2C0._STA [ 0.138139] Executing Method \_SB_.PCI0.I2C0._INI [ 0.138142] Executing Method \_SB_.PCI0.I2C0.ACD0._STA [ 0.138190] Executing Method \_SB_.PCI0.I2C0.ACD0._INI [ 0.138227] Executing Method \_SB_.PCI0.I2C0.ACD1._STA [ 0.138255] Executing Method \_SB_.PCI0.I2C0.ACD2._STA [ 0.138291] Executing Method \_SB_.PCI0.I2C0.ACD3._STA [ 0.138319] Executing Method \_SB_.PCI0.ADSP._STA [ 0.138352] Executing Method \_SB_.PCI0.ADSP._INI [ 0.138931] ACPI: Dynamic OEM Table Load: [ 0.138938] ACPI: SSDT 0xFFFF880214249C00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.139805] ACPI: Dynamic OEM Table Load: [ 0.139812] ACPI: SSDT 0xFFFF880214205000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.140736] ACPI: Dynamic OEM Table Load: [ 0.140741] ACPI: SSDT 0xFFFF880214292C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.142328] ACPI : EC: EC started [ 0.142365] Executing Method \_SB_.PCI0.LPCB.ECDV._REG [ 0.151247] ACPI: Interpreter enabled [ 0.151256] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580) [ 0.151264] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580) [ 0.151278] ACPI: (supports S0 S3 S4 S5) [ 0.151281] ACPI: Using IOAPIC for interrupt routing [ 0.151309] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.153104] ACPI: Power Resource [PG00] (on) [ 0.153493] ACPI: Power Resource [PG01] (on) [ 0.153864] ACPI: Power Resource [PG02] (on) [ 0.154388] ACPI: Power Resource [PXP] (on) [ 0.155787] ACPI: Power Resource [PXP] (on) [ 0.159667] ACPI: Power Resource [PX05] (on) [ 0.160540] ACPI: Power Resource [PAUD] (on) [ 0.181212] ACPI: Power Resource [PXTC] (off) [ 0.182566] ACPI: Power Resource [P3PR] (off) [ 0.187744] ACPI: Power Resource [FN00] (off) [ 0.187809] ACPI: Power Resource [FN01] (off) [ 0.187873] ACPI: Power Resource [FN02] (off) [ 0.187935] ACPI: Power Resource [FN03] (off) [ 0.187999] ACPI: Power Resource [FN04] (off) [ 0.188825] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.188832] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.189416] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.189420] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.189842] PCI host bridge to bus 0000:00 [ 0.189846] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.189848] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.189851] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.189854] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.189857] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.189860] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.189863] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.189866] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.189870] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.189873] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.189876] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.189879] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.189882] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window] [ 0.189890] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.189975] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.189983] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit] [ 0.189987] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.189991] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.190069] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.190075] pci 0000:00:03.0: reg 0x10: [mem 0xf7218000-0xf721bfff 64bit] [ 0.190153] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000 [ 0.190161] pci 0000:00:04.0: reg 0x10: [mem 0xf7210000-0xf7217fff 64bit] [ 0.190256] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.190270] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit] [ 0.190314] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.190372] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.190397] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.190411] pci 0000:00:16.0: reg 0x10: [mem 0xf7221000-0xf722101f 64bit] [ 0.190460] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.190550] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 0.190599] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.190697] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.190727] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 0.190776] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.190870] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.190903] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.191061] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.191072] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.191077] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.191082] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.191088] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.191093] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.191098] pci 0000:00:1f.2: reg 0x24: [mem 0xf721e000-0xf721e7ff] [ 0.191124] pci 0000:00:1f.2: PME# supported from D3hot [ 0.191189] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.191201] pci 0000:00:1f.3: reg 0x10: [mem 0xf721d000-0xf721d0ff 64bit] [ 0.191217] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.191301] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.191324] pci 0000:00:1f.6: reg 0x10: [mem 0xf721c000-0xf721cfff 64bit] [ 0.191529] pci 0000:01:00.0: [10ec:5249] type 00 class 0xff0000 [ 0.191553] pci 0000:01:00.0: reg 0x10: [mem 0xf7100000-0xf7100fff] [ 0.191668] pci 0000:01:00.0: supports D1 D2 [ 0.191669] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.191703] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.194735] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.194741] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff] [ 0.194844] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 0.194884] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit] [ 0.195053] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.195099] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.196754] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.196760] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.200658] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.200724] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.200794] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.200858] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.200923] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.200985] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.201047] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.201109] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.202484] ACPI: Enabled 3 GPEs in block 00 to 7F [ 0.202550] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930 [ 0.202693] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 0.202797] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.202800] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.202804] vgaarb: loaded [ 0.202806] vgaarb: bridge control possible 0000:00:02.0 [ 0.202863] SCSI subsystem initialized [ 0.202894] libata version 3.00 loaded. [ 0.202910] ACPI: bus type USB registered [ 0.202926] usbcore: registered new interface driver usbfs [ 0.202933] usbcore: registered new interface driver hub [ 0.202946] usbcore: registered new device driver usb [ 0.205782] media: Linux media interface: v0.10 [ 0.205790] Linux video capture interface: v2.00 [ 0.205953] wmi: Mapper loaded [ 0.205975] Advanced Linux Sound Architecture Driver Initialized. [ 0.205988] PCI: Using ACPI for IRQ routing [ 0.207147] PCI: pci_cache_line_size set to 64 bytes [ 0.207209] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.207210] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.207211] e820: reserve RAM buffer [mem 0xc4a7d018-0xc7ffffff] [ 0.207212] e820: reserve RAM buffer [mem 0xc6444000-0xc7ffffff] [ 0.207213] e820: reserve RAM buffer [mem 0xdadbf000-0xdbffffff] [ 0.207214] e820: reserve RAM buffer [mem 0xdbaff000-0xdbffffff] [ 0.207215] e820: reserve RAM buffer [mem 0x21e800000-0x21fffffff] [ 0.207293] Bluetooth: Core ver 2.20 [ 0.207298] NET: Registered protocol family 31 [ 0.207301] Bluetooth: HCI device and connection manager initialized [ 0.207303] Bluetooth: HCI socket layer initialized [ 0.207306] Bluetooth: L2CAP socket layer initialized [ 0.207311] Bluetooth: SCO socket layer initialized [ 0.207372] NetLabel: Initializing [ 0.207375] NetLabel: domain hash size = 128 [ 0.207377] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.207390] NetLabel: unlabeled traffic allowed by default [ 0.207431] cfg80211: Calling CRDA to update world regulatory domain [ 0.207488] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.207495] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.209520] Switched to clocksource hpet [ 0.216499] pnp: PnP ACPI init [ 0.216700] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.216704] system 00:00: [io 0xffff] has been reserved [ 0.216707] system 00:00: [io 0xffff] has been reserved [ 0.216709] system 00:00: [io 0xffff] has been reserved [ 0.216712] system 00:00: [io 0x1800-0x18fe] could not be reserved [ 0.216714] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.216719] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.216763] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.216794] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.216798] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.216927] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.216944] pnp 00:04: Plug and Play ACPI device, IDs DLL0665 PNP0f13 (active) [ 0.217103] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.217106] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.217109] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.217111] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.217114] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.217116] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.217119] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.217122] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.217124] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.217127] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.217130] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.217133] system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved [ 0.217136] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.217534] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved [ 0.217537] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved [ 0.217540] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved [ 0.217542] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.221567] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 0.222170] pnp: PnP ACPI: found 7 devices [ 0.227957] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.227976] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.227982] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff] [ 0.227988] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.227993] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff] [ 0.228000] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.228002] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.228003] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.228004] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.228005] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.228006] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.228007] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.228008] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.228009] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.228010] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.228011] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.228012] pci_bus 0000:00: resource 15 [mem 0xdf800000-0xfeafffff window] [ 0.228013] pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.228014] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff] [ 0.228046] NET: Registered protocol family 2 [ 0.228186] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.228295] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.228400] TCP: Hash tables configured (established 65536 bind 65536) [ 0.228427] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.228448] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.228498] NET: Registered protocol family 1 [ 0.228568] RPC: Registered named UNIX socket transport module. [ 0.228571] RPC: Registered udp transport module. [ 0.228573] RPC: Registered tcp transport module. [ 0.228575] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.228585] pci 0000:00:02.0: Video device with shadowed ROM [ 0.228772] PCI: CLS 64 bytes, default 64 [ 0.228806] Unpacking initramfs... [ 0.430693] Freeing initrd memory: 18360K (ffff88003ee0d000 - ffff88003fffb000) [ 0.430724] dmar: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0 [ 0.430730] dmar: ACPI device "INT3438:00" under DMAR at fed91000 as 00:13.0 [ 0.430740] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.430744] software IO TLB [mem 0xbe8fa000-0xc28fa000] (64MB) mapped at [ffff8800be8fa000-ffff8800c28f9fff] [ 0.431015] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x18 [ 0.431022] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x18 [ 0.431028] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x18 [ 0.431034] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x18 [ 0.431066] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.431298] AVX2 version of gcm_enc/dec engaged. [ 0.431302] AES CTR mode by8 optimization enabled [ 0.432748] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 0.433942] alg: No test for crc32 (crc32-pclmul) [ 0.434120] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.434133] Initialise system trusted keyring [ 0.434146] audit: initializing netlink subsys (disabled) [ 0.434155] audit: type=2000 audit(1437922915.413:1): initialized [ 0.434452] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.435403] zpool: loaded [ 0.435530] VFS: Disk quotas dquot_6.6.0 [ 0.435554] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.435826] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.435919] fuse init (API version 7.23) [ 0.436012] Key type big_key registered [ 0.436015] SELinux: Registering netfilter hooks [ 0.436812] alg: No test for stdrng (krng) [ 0.438540] NET: Registered protocol family 38 [ 0.438548] Key type asymmetric registered [ 0.438552] Asymmetric key parser 'x509' registered [ 0.438584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.438612] io scheduler noop registered [ 0.438616] io scheduler deadline registered [ 0.438629] io scheduler cfq registered (default) [ 0.438994] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.438998] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.439001] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.439015] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.439018] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.439022] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.439026] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.439038] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.439060] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.439094] efifb: probing for efifb [ 0.439131] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 22500k, total 22500k [ 0.439135] efifb: mode is 3200x1800x32, linelength=12800, pages=1 [ 0.439137] efifb: scrolling: redraw [ 0.439140] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.447683] Console: switching to colour frame buffer device 400x112 [ 0.455653] fb0: EFI VGA frame buffer device [ 0.455676] intel_idle: MWAIT substates: 0x11142120 [ 0.455677] intel_idle: v0.4 model 0x3D [ 0.455678] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.456263] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 0.456320] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (CPU0, 81) node ffff8802158aff50 [ 0.456368] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (CPU1, 81) node ffff8802158aff78 [ 0.456416] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (CPU2, 81) node ffff8802158affa0 [ 0.456464] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (CPU3, 81) node ffff8802158affc8 [ 0.456999] ACPI: AC Adapter [AC] (off-line) [ 0.457137] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.457864] ACPI: Lid Switch [LID0] [ 0.457915] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.457942] ACPI: Power Button [PBTN] [ 0.457977] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.457998] ACPI: Sleep Button [SBTN] [ 0.458030] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.458053] ACPI: Power Button [PWRF] [ 0.458079] evxface-0664 install_fixed_event_ha: Enabled fixed event PowerButton (2), Handler=ffffffff814c4e38 [ 0.459406] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.459423] ACPI: Thermal Zone [THM] (25 C) [ 0.462802] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.462823] ACPI: Thermal Zone [TZ00] (66 C) [ 0.465841] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.465860] ACPI: Thermal Zone [TZ01] (66 C) [ 0.482059] ACPI: Battery Slot [BAT0] (battery present) [ 0.482127] GHES: HEST is not enabled! [ 0.482190] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.482643] Non-volatile memory driver v1.3 [ 0.482682] Linux agpgart interface v0.103 [ 0.482753] [drm] Initialized drm 1.1.0 20060810 [ 0.483235] [drm] Memory usable by graphics device = 4096M [ 0.483253] checking generic (e0000000 15f9000) vs hw (e0000000 10000000) [ 0.483254] fb: switching to inteldrmfb from EFI VGA [ 0.483281] Console: switching to colour dummy device 80x25 [ 0.483371] [drm] Replacing VGA console driver [ 0.483862] [drm] ACPI BIOS requests an excessive sleep of 10000 ms, using 1500 ms instead [ 0.490037] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.490042] [drm] Driver supports precise vblank timestamp query. [ 0.490134] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.505040] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.515135] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 0.515157] fbcon: inteldrmfb (fb0) is primary device [ 0.515186] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0 [ 0.517921] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 0.518044] rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 46 [ 0.521301] ahci 0000:00:1f.2: version 3.0 [ 0.521403] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.531735] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode [ 0.531737] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 0.532124] scsi host0: ahci [ 0.532346] scsi host1: ahci [ 0.532463] scsi host2: ahci [ 0.532550] scsi host3: ahci [ 0.532579] ata1: DUMMY [ 0.532580] ata2: DUMMY [ 0.532580] ata3: DUMMY [ 0.532581] ata4: SATA max UDMA/133 abar m2048@0xf721e000 port 0xf721e280 irq 47 [ 0.532638] libphy: Fixed MDIO Bus: probed [ 0.532640] tun: Universal TUN/TAP device driver, 1.6 [ 0.532640] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.532688] usbcore: registered new interface driver r8152 [ 0.532694] usbcore: registered new interface driver cdc_ether [ 0.532845] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.532875] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.532939] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 0.532943] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.532994] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.532995] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.532996] usb usb1: Product: xHCI Host Controller [ 0.532996] usb usb1: Manufacturer: Linux 4.0.0+ xhci-hcd [ 0.532997] usb usb1: SerialNumber: 0000:00:14.0 [ 0.533073] hub 1-0:1.0: USB hub found [ 0.533082] hub 1-0:1.0: 11 ports detected [ 0.536872] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.536896] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.536915] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.536915] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.536916] usb usb2: Product: xHCI Host Controller [ 0.536917] usb usb2: Manufacturer: Linux 4.0.0+ xhci-hcd [ 0.536917] usb usb2: SerialNumber: 0000:00:14.0 [ 0.536976] hub 2-0:1.0: USB hub found [ 0.536982] hub 2-0:1.0: 4 ports detected [ 0.538344] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.538347] ehci-pci: EHCI PCI platform driver [ 0.538353] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.538358] ohci-pci: OHCI PCI platform driver [ 0.538364] uhci_hcd: USB Universal Host Controller Interface driver [ 0.538387] usbcore: registered new interface driver usb-storage [ 0.538404] usbcore: registered new interface driver usbserial [ 0.538407] usbcore: registered new interface driver usbserial_generic [ 0.538411] usbserial: USB Serial support registered for generic [ 0.538416] usbcore: registered new interface driver ftdi_sio [ 0.538419] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.538445] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.539076] i8042: Warning: Keylock active [ 0.541252] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.541254] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.541342] mousedev: PS/2 mouse device common for all mice [ 0.541651] evxface-0664 install_fixed_event_ha: Enabled fixed event RealTimeClock (4), Handler=ffffffff81781a70 [ 0.541656] rtc_cmos 00:01: RTC can wake from S4 [ 0.541775] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.541797] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.541883] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254) [ 0.541884] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.541909] usbcore: registered new interface driver uvcvideo [ 0.541909] USB Video Class driver (1.1.1) [ 0.543040] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.544575] ACPI Warning: \_SB_.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20150410/nspredef-297) [ 0.544577] ACPI: Invalid package element [0]: got number, expecting [R] [ 0.578431] _ART package 0 is invalid, ignored [ 0.578431] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 0.597612] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 0.597655] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860) [ 0.597779] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 0.597797] iTCO_vendor_support: vendor-support=0 [ 0.597846] device-mapper: uevent: version 1.0.3 [ 0.597972] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com [ 0.598129] usbcore: registered new interface driver btusb [ 0.598140] Intel P-state driver initializing. [ 0.598295] sdhci: Secure Digital Host Controller Interface driver [ 0.598296] sdhci: Copyright(c) Pierre Ossman [ 0.602231] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 0.602245] EFI Variables Facility v0.08 2004-May-17 [ 0.605110] hidraw: raw HID events driver (C) Jiri Kosina [ 0.605476] usbcore: registered new interface driver usbhid [ 0.605477] usbhid: USB HID core driver [ 0.628848] i2c_hid i2c-DLL0665:01: failed to retrieve report from device. [ 0.637072] i2c_hid i2c-DLL0665:01: failed to retrieve report from device. [ 0.637922] i2c_hid i2c-DLL0665:01: failed to retrieve report from device. [ 0.639875] i2c_hid i2c-DLL0665:01: failed to retrieve report from device. [ 0.639923] input: DLL0665:01 06CB:76AD UNKNOWN as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLL0665:01/0018:06CB:76AD.0001/input/input8 [ 0.640241] hid-multitouch 0018:06CB:76AD.0001: input,hidraw0: <UNKNOWN> HID v1.00 Mouse [DLL0665:01 06CB:76AD] on [ 0.641551] input: Dell WMI hotkeys as /devices/virtual/input/input10 [ 0.642201] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 0.642334] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops) [ 0.642439] drop_monitor: Initializing network drop monitor service [ 0.642473] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 0.642911] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.642980] Initializing XFRM netlink socket [ 0.643304] NET: Registered protocol family 10 [ 0.643510] mip6: Mobile IPv6 [ 0.643517] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.643732] NET: Registered protocol family 17 [ 0.643745] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.643748] Ebtables v2.0 registered [ 0.644245] Loading compiled-in X.509 certificates [ 0.647757] Loaded X.509 cert 'Magrathea: Glacier signing key: fc047a540e21515ad039688bb8a1cf32a880e5c8' [ 0.648061] registered taskstats version 1 [ 0.648514] rtc_cmos 00:01: setting system clock to 2015-07-26 15:01:56 UTC (1437922916) [ 0.648657] ALSA device list: [ 0.648657] #0: HDA Intel HDMI at 0xf7218000 irq 49 [ 0.889999] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 1.054881] usb 1-3: No LPM exit latency info found, disabling LPM. [ 1.056038] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2a [ 1.056039] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.070998] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 1.071024] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2 [ 1.071025] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-2) [ 1.071033] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.bseq failed with error -2 [ 1.071033] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.8.bseq [ 1.128287] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 1.210206] usb 1-4: new full-speed USB device number 3 using xhci_hcd [ 1.376524] usb 1-4: New USB device found, idVendor=04f3, idProduct=20d0 [ 1.376526] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 1.376527] usb 1-4: Product: Touchscreen [ 1.376528] usb 1-4: Manufacturer: ELAN [ 1.376729] usb 1-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.385389] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0002/input/input11 [ 1.385910] hid-multitouch 0003:04F3:20D0.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0 [ 1.433404] tsc: Refined TSC clocksource calibration: 2593.990 MHz [ 1.433410] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x25640ebfed9, max_idle_ns: 440795320785 ns [ 1.538379] usb 1-5: new high-speed USB device number 4 using xhci_hcd [ 1.592848] Console: switching to colour frame buffer device 400x112 [ 1.682598] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.682599] i915 0000:00:02.0: registered panic notifier [ 1.726638] usb 1-5: New USB device found, idVendor=0bda, idProduct=5682 [ 1.728415] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.729953] usb 1-5: Product: Integrated_Webcam_HD [ 1.731416] usb 1-5: Manufacturer: CKFEH41F301030009340 [ 1.732891] usb 1-5: SerialNumber: 200901010001 [ 1.737619] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5682) [ 1.744001] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13 [ 1.993722] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.997466] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.997469] ata4.00: ATA-9: SAMSUNG SSD PM851 M.2 2280 256GB, EXT25D0Q, max UDMA/133 [ 1.999193] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.000995] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 2.001031] ata4.00: configured for UDMA/133 [ 2.002644] scsi 3:0:0:0: Direct-Access ATA SAMSUNG SSD PM85 5D0Q PQ: 0 ANSI: 5 [ 2.004361] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.004399] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 2.007611] sd 3:0:0:0: [sda] Write Protect is off [ 2.009100] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.009107] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.012288] sda: sda1 sda2 sda3 [ 2.014323] sd 3:0:0:0: [sda] Attached SCSI disk [ 2.016159] Freeing unused kernel memory: 1680K (ffffffff823af000 - ffffffff82553000) [ 2.017723] Write protecting the kernel read-only data: 18432k [ 2.019450] Freeing unused kernel memory: 508K (ffff880001b81000 - ffff880001c00000) [ 2.021209] Freeing unused kernel memory: 1244K (ffff8800020c9000 - ffff880002200000) [ 2.027486] random: systemd urandom read with 81 bits of entropy available [ 2.029942] systemd[1]: systemd 216 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.031667] systemd[1]: Detected architecture 'x86-64'. [ 2.033287] systemd[1]: Running in initial RAM disk. [ 2.040050] systemd[1]: Set hostname to <mfleming-mobl1.ger.corp.intel.com>. [ 2.063606] systemd[1]: Expecting device dev-disk-by\x2duuid-AF27\x2d22C8.device... [ 2.066933] systemd[1]: Expecting device dev-mapper-fedora\x2dswap.device... [ 2.070261] systemd[1]: Expecting device dev-disk-by\x2duuid-e75ed791\x2dd3e4\x2d480d\x2daa9f\x2d499f34a15b23.device... [ 2.073594] systemd[1]: Expecting device dev-mapper-fedora\x2droot.device... [ 2.076951] systemd[1]: Starting Timers. [ 2.080225] systemd[1]: Reached target Timers. [ 2.081817] systemd[1]: Expecting device dev-disk-by\x2duuid-26312b50\x2dd793\x2d4686\x2da576\x2d28b32bee5a21.device... [ 2.085200] systemd[1]: Expecting device dev-mapper-luks\x2d26312b50\x2dd793\x2d4686\x2da576\x2d28b32bee5a21.device... [ 2.088478] systemd[1]: Starting -.slice. [ 2.095337] systemd[1]: Created slice -.slice. [ 2.096945] systemd[1]: Starting udev Control Socket. [ 2.100227] systemd[1]: Listening on udev Control Socket. [ 2.101827] systemd[1]: Starting udev Kernel Socket. [ 2.105091] systemd[1]: Listening on udev Kernel Socket. [ 2.106657] systemd[1]: Starting Journal Socket. [ 2.109904] systemd[1]: Listening on Journal Socket. [ 2.111488] systemd[1]: Starting System Slice. [ 2.114859] systemd[1]: Created slice System Slice. [ 2.116445] systemd[1]: Started dracut ask for additional cmdline parameters. [ 2.118073] systemd[1]: Starting dracut cmdline hook... [ 2.121514] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 2.124979] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.126669] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.130309] systemd[1]: Starting system-systemd\x2dcryptsetup.slice. [ 2.134123] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 2.135762] systemd[1]: Starting Journal Socket (/dev/log). [ 2.137628] systemd[1]: Starting Slices. [ 2.141221] systemd[1]: Reached target Slices. [ 2.142834] systemd[1]: Starting Setup Virtual Console... [ 2.146490] systemd[1]: Started Load Kernel Modules. [ 2.148116] systemd[1]: Starting Apply Kernel Variables... [ 2.162120] systemd[1]: Starting Swap. [ 2.168223] systemd[1]: Reached target Swap. [ 2.171263] systemd[1]: Starting Local File Systems. [ 2.177399] systemd[1]: Reached target Local File Systems. [ 2.183979] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 2.190467] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.196937] systemd[1]: Started Apply Kernel Variables. [ 2.203330] systemd[1]: Started dracut cmdline hook. [ 2.211283] systemd[1]: Starting dracut pre-udev hook... [ 2.217606] systemd[1]: Starting Sockets. [ 2.223499] systemd[1]: Reached target Sockets. [ 2.225412] systemd[1]: Starting Journal Service... [ 2.229143] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.236303] systemd[1]: Started Setup Virtual Console. [ 2.240688] systemd[1]: Started Create Static Device Nodes in /dev. [ 2.243927] systemd[1]: Started dracut pre-udev hook. [ 2.247817] systemd[1]: Starting udev Kernel Device Manager... [ 2.255156] systemd[1]: Started udev Kernel Device Manager. [ 2.258248] systemd[1]: Started Journal Service. [ 2.434096] Switched to clocksource tsc [ 3.082655] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 3.356550] cfg80211: Calling CRDA to update world regulatory domain [ 3.922408] random: nonblocking pool is initialized [ 5.297146] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 6.502478] cfg80211: Calling CRDA to update world regulatory domain [ 7.245333] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 8.031733] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [BAT0] (Device) Value 0x80 (Status Change) Node ffff8802158c3848 [ 9.189996] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 9.299384] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 9.567098] systemd-journald[329]: Received SIGTERM from PID 1 (systemd). [ 9.656345] cfg80211: Calling CRDA to update world regulatory domain [ 9.788153] audit: type=1404 audit(1437922925.633:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 9.835622] SELinux: 32768 avtab hash slots, 105179 rules. [ 9.846337] SELinux: 32768 avtab hash slots, 105179 rules. [ 9.865029] SELinux: 8 users, 103 roles, 4998 types, 294 bools, 1 sens, 1024 cats [ 9.865032] SELinux: 83 classes, 105179 rules [ 9.867805] SELinux: Permission audit_read in class capability2 not defined in policy. [ 9.869051] SELinux: Class binder not defined in policy. [ 9.870302] SELinux: the above unknown classes and permissions will be allowed [ 9.871565] SELinux: Completing initialization. [ 9.871565] SELinux: Setting up existing superblocks. [ 9.876661] audit: type=1403 audit(1437922925.721:3): policy loaded auid=4294967295 ses=4294967295 [ 9.881145] systemd[1]: Successfully loaded SELinux policy in 98.589ms. [ 9.927710] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 9.953423] systemd[1]: Relabelled /dev and /run in 13.901ms. [ 10.445206] EXT4-fs (dm-2): re-mounted. Opts: (null) [ 10.467314] systemd-journald[688]: Received request to flush runtime journal from PID 1 [ 11.144360] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 12.225684] sst-acpi INT3438:00: DesignWare DMA Controller, 8 channels [ 12.247948] (NULL device *): Direct firmware load for intel/IntcPP01.bin failed with error -2 [ 12.250139] (NULL device *): fw image intel/IntcPP01.bin not available(-2) [ 12.252737] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [ 12.274157] Intel(R) Wireless WiFi driver for Linux [ 12.275839] Copyright(c) 2003- 2015 Intel Corporation [ 12.277375] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 12.281280] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-13.ucode failed with error -2 [ 12.295783] broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> System Pin mapping ok [ 12.298413] broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> Offload0 Pin mapping ok [ 12.301010] broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> Offload1 Pin mapping ok [ 12.303580] broadwell-audio broadwell-audio: snd-soc-dummy-dai <-> Loopback Pin mapping ok [ 12.308338] iwlwifi 0000:02:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm [ 12.309390] broadwell-audio broadwell-audio: rt286-aif1 <-> snd-soc-dummy-dai mapping ok [ 12.320988] Adding 8126460k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:8126460k SSFS [ 12.322155] input: broadwell-rt286 Headset as /devices/pci0000:00/INT3438:00/broadwell-audio/sound/card1/input14 [ 12.768663] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 12.770155] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 12.771762] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 12.810237] cfg80211: Calling CRDA to update world regulatory domain [ 12.834958] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 12.835921] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 12.932714] cfg80211: World regulatory domain updated: [ 12.934226] cfg80211: DFS Master region: unset [ 12.934237] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 12.937100] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 12.938770] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 12.940195] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 12.941594] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 12.942981] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 12.944379] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 12.945756] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 12.947229] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 12.949216] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 13.004247] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 13.018044] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 13.099059] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 13.166806] audit: type=1305 audit(1437919329.009:4): audit_pid=847 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 [ 13.636905] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 13.637112] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [ 13.733809] psmouse serio1: Failed to deactivate mouse on isa0060/serio1 [ 14.199195] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 14.588209] device virbr0-nic entered promiscuous mode [ 14.591501] virbr0: port 1(virbr0-nic) entered forwarding state [ 14.591510] virbr0: port 1(virbr0-nic) entered forwarding state [ 14.784693] virbr0: port 1(virbr0-nic) entered disabled state [ 15.297972] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 17.251797] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 18.403963] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7 [ 18.605882] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 19.206355] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 20.572826] wlp2s0: authenticate with a8:54:b2:90:ca:e4 [ 20.576759] wlp2s0: send auth to a8:54:b2:90:ca:e4 (try 1/3) [ 20.578682] wlp2s0: authenticated [ 20.578999] wlp2s0: associate with a8:54:b2:90:ca:e4 (try 1/3) [ 20.582670] wlp2s0: RX AssocResp from a8:54:b2:90:ca:e4 (capab=0x431 status=0 aid=1) [ 20.583973] wlp2s0: associated [ 21.163253] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 23.114762] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 25.069126] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 27.037155] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [ 29.487448] Adjusting tsc more than 11% (5419137 vs 7179175) [ 37.791337] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [AMW0] (Device) Value 0xD0 (Hardware-Specific) Node ffff8802158bf1e0 [ 37.806763] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [LCD_] (Device) Value 0x87 (Device-Specific) Node ffff8802158bfa50 [ 64.306679] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [ 320.512651] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [ 3193.010029] perf interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 4660.044644] IPv6: ADDRCONF(NETDEV_CHANGE): vpn0: link becomes ready [ 4660.759309] IPv6: ADDRCONF(NETDEV_CHANGE): vpn0: link becomes ready [ 4673.091918] device vnet0 entered promiscuous mode [ 4673.093850] virbr0: port 2(vnet0) entered listening state [ 4673.093860] virbr0: port 2(vnet0) entered listening state [ 4673.601476] kvm: zapping shadow pages for mmio generation wraparound [ 4675.102019] virbr0: port 2(vnet0) entered learning state [ 4677.107252] virbr0: topology change detected, propagating [ 4677.107263] virbr0: port 2(vnet0) entered forwarding state [ 4689.796710] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 5343.661577] virbr0: port 2(vnet0) entered disabled state [ 5343.662070] device vnet0 left promiscuous mode [ 5343.662095] virbr0: port 2(vnet0) entered disabled state [20917.044276] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [AC__] (Device) Value 0x80 (Status Change) Node ffff8802158c3758 [20917.044326] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [BAT0] (Device) Value 0x80 (Status Change) Node ffff8802158c3848 [20917.045204] evmisc-0146 ev_queue_notify_reques: No notify handler for Notify, ignoring (PCCD, 82) node ffff8802158e8fc8 [20917.045239] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [CPU0] (Processor) Value 0x81 (Information Change) Node ffff8802158aff50 [20917.045266] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [CPU1] (Processor) Value 0x81 (Information Change) Node ffff8802158aff78 [20917.045291] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [CPU2] (Processor) Value 0x81 (Information Change) Node ffff8802158affa0 [20917.045316] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [CPU3] (Processor) Value 0x81 (Information Change) Node ffff8802158affc8 [20917.172364] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [20920.605614] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [BAT0] (Device) Value 0x80 (Status Change) Node ffff8802158c3848 [30244.861386] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [BAT0] (Device) Value 0x80 (Status Change) Node ffff8802158c3848 [47597.023554] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [71744.643242] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [72355.165743] device vnet0 entered promiscuous mode [72355.171722] virbr0: port 2(vnet0) entered listening state [72355.171733] virbr0: port 2(vnet0) entered listening state [72355.706258] kvm: zapping shadow pages for mmio generation wraparound [72357.175584] virbr0: port 2(vnet0) entered learning state [72359.180813] virbr0: topology change detected, propagating [72359.180827] virbr0: port 2(vnet0) entered forwarding state [72509.746610] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [79642.220531] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [79670.600446] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [79744.346081] virbr0: port 2(vnet0) entered disabled state [79744.347022] device vnet0 left promiscuous mode [79744.347043] virbr0: port 2(vnet0) entered disabled state [79744.422192] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [79971.465636] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [AMW0] (Device) Value 0xD0 (Hardware-Specific) Node ffff8802158bf1e0 [79971.466132] evmisc-0171 ev_queue_notify_reques: Dispatching Notify on [LCD_] (Device) Value 0x87 (Device-Specific) Node ffff8802158bfa50 [80477.323500] usb 1-1: new low-speed USB device number 5 using xhci_hcd [80477.492206] usb 1-1: New USB device found, idVendor=046d, idProduct=c404 [80477.492212] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [80477.492215] usb 1-1: Product: Trackball [80477.492217] usb 1-1: Manufacturer: Logitech [80477.493368] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [80477.498167] input: Logitech Trackball as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C404.0003/input/input15 [80477.498690] hid-generic 0003:046D:C404.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:14.0-1/input0 [83553.913804] iwlwifi 0000:02:00.0: Queue 16 stuck for 10000 ms. [83553.913818] iwlwifi 0000:02:00.0: Current SW read_ptr 183 write_ptr 218 [83553.913861] iwl data: 00000000: bf 00 00 00 00 00 00 00 00 00 80 ff 00 00 00 00 ................ [83553.913886] iwlwifi 0000:02:00.0: FH TRBs(0) = 0x00000000 [83553.913910] iwlwifi 0000:02:00.0: FH TRBs(1) = 0xc01100c5 [83553.913931] iwlwifi 0000:02:00.0: FH TRBs(2) = 0x00000000 [83553.913952] iwlwifi 0000:02:00.0: FH TRBs(3) = 0x803000be [83553.913973] iwlwifi 0000:02:00.0: FH TRBs(4) = 0x00000000 [83553.913994] iwlwifi 0000:02:00.0: FH TRBs(5) = 0x00000000 [83553.914015] iwlwifi 0000:02:00.0: FH TRBs(6) = 0x00000000 [83553.914036] iwlwifi 0000:02:00.0: FH TRBs(7) = 0x0070904f [83553.914099] iwlwifi 0000:02:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [191,191] [83553.914160] iwlwifi 0000:02:00.0: Q 1 is active and mapped to fifo 2 ra_tid 0x0000 [0,0] [83553.914222] iwlwifi 0000:02:00.0: Q 2 is active and mapped to fifo 1 ra_tid 0x0000 [1,1] [83553.914284] iwlwifi 0000:02:00.0: Q 3 is active and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914346] iwlwifi 0000:02:00.0: Q 4 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914408] iwlwifi 0000:02:00.0: Q 5 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914470] iwlwifi 0000:02:00.0: Q 6 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914528] iwlwifi 0000:02:00.0: Q 7 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914591] iwlwifi 0000:02:00.0: Q 8 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914653] iwlwifi 0000:02:00.0: Q 9 is active and mapped to fifo 7 ra_tid 0x0000 [80,80] [83553.914723] iwlwifi 0000:02:00.0: Q 10 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914785] iwlwifi 0000:02:00.0: Q 11 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914847] iwlwifi 0000:02:00.0: Q 12 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914909] iwlwifi 0000:02:00.0: Q 13 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.914971] iwlwifi 0000:02:00.0: Q 14 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.915033] iwlwifi 0000:02:00.0: Q 15 is active and mapped to fifo 5 ra_tid 0x0000 [0,0] [83553.915095] iwlwifi 0000:02:00.0: Q 16 is active and mapped to fifo 1 ra_tid 0x0000 [183,218] [83553.915157] iwlwifi 0000:02:00.0: Q 17 is inactive and mapped to fifo 3 ra_tid 0x0007 [57,57] [83553.915219] iwlwifi 0000:02:00.0: Q 18 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.915281] iwlwifi 0000:02:00.0: Q 19 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [83553.915354] iwlwifi 0000:02:00.0: Microcode SW error detected. Restarting 0x2000000. [83553.915358] iwlwifi 0000:02:00.0: CSR values: [83553.915360] iwlwifi 0000:02:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) [83553.915375] iwlwifi 0000:02:00.0: CSR_HW_IF_CONFIG_REG: 0X00489200 [83553.915390] iwlwifi 0000:02:00.0: CSR_INT_COALESCING: 0X00000040 [83553.915406] iwlwifi 0000:02:00.0: CSR_INT: 0X00000000 [83553.915421] iwlwifi 0000:02:00.0: CSR_INT_MASK: 0X00000000 [83553.915436] iwlwifi 0000:02:00.0: CSR_FH_INT_STATUS: 0X00000000 [83553.915452] iwlwifi 0000:02:00.0: CSR_GPIO_IN: 0X00000000 [83553.915467] iwlwifi 0000:02:00.0: CSR_RESET: 0X00000000 [83553.915482] iwlwifi 0000:02:00.0: CSR_GP_CNTRL: 0X080403c5 [83553.915497] iwlwifi 0000:02:00.0: CSR_HW_REV: 0X00000210 [83553.915513] iwlwifi 0000:02:00.0: CSR_EEPROM_REG: 0Xd55555d5 [83553.915528] iwlwifi 0000:02:00.0: CSR_EEPROM_GP: 0X00000000 [83553.915543] iwlwifi 0000:02:00.0: CSR_OTP_GP_REG: 0Xd55555d5 [83553.915559] iwlwifi 0000:02:00.0: CSR_GIO_REG: 0X00080042 [83553.915574] iwlwifi 0000:02:00.0: CSR_GP_UCODE_REG: 0X00000000 [83553.915589] iwlwifi 0000:02:00.0: CSR_GP_DRIVER_REG: 0X00000000 [83553.915604] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP1: 0X00000000 [83553.915620] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP2: 0X00000000 [83553.915635] iwlwifi 0000:02:00.0: CSR_LED_REG: 0X00000060 [83553.915650] iwlwifi 0000:02:00.0: CSR_DRAM_INT_TBL_REG: 0X880d9476 [83553.915665] iwlwifi 0000:02:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 [83553.915681] iwlwifi 0000:02:00.0: CSR_ANA_PLL_CFG: 0Xd55555d5 [83553.915696] iwlwifi 0000:02:00.0: CSR_MONITOR_STATUS_REG: 0Xebb7fff7 [83553.915711] iwlwifi 0000:02:00.0: CSR_HW_REV_WA_REG: 0X0001001a [83553.915727] iwlwifi 0000:02:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 [83553.915729] iwlwifi 0000:02:00.0: FH register values: [83553.915752] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X2131d100 [83553.915764] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X021033e0 [83553.915777] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000078 [83553.915794] iwlwifi 0000:02:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X00801114 [83553.915817] iwlwifi 0000:02:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc [83553.915829] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X03030000 [83553.915842] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 [83553.915854] iwlwifi 0000:02:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001 [83553.915867] iwlwifi 0000:02:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 [83553.915985] iwlwifi 0000:02:00.0: Start IWL Error Log Dump: [83553.915987] iwlwifi 0000:02:00.0: Status: 0x00000000, count: 6 [83553.915989] iwlwifi 0000:02:00.0: Loaded firmware version: 25.17.12.0 [83553.915992] iwlwifi 0000:02:00.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN [83553.915994] iwlwifi 0000:02:00.0: 0x000006F0 | uPc [83553.915996] iwlwifi 0000:02:00.0: 0x00000000 | branchlink1 [83553.915998] iwlwifi 0000:02:00.0: 0x00042870 | branchlink2 [83553.916000] iwlwifi 0000:02:00.0: 0x00043154 | interruptlink1 [83553.916002] iwlwifi 0000:02:00.0: 0x00016F0A | interruptlink2 [83553.916004] iwlwifi 0000:02:00.0: 0x00000000 | data1 [83553.916006] iwlwifi 0000:02:00.0: 0x00000080 | data2 [83553.916007] iwlwifi 0000:02:00.0: 0x07030000 | data3 [83553.916009] iwlwifi 0000:02:00.0: 0x7440117A | beacon time [83553.916011] iwlwifi 0000:02:00.0: 0x01D31E85 | tsf low [83553.916013] iwlwifi 0000:02:00.0: 0x00000000 | tsf hi [83553.916015] iwlwifi 0000:02:00.0: 0x00000000 | time gp1 [83553.916017] iwlwifi 0000:02:00.0: 0x705033DE | time gp2 [83553.916019] iwlwifi 0000:02:00.0: 0x00000000 | time gp3 [83553.916021] iwlwifi 0000:02:00.0: 0x00041911 | uCode version [83553.916023] iwlwifi 0000:02:00.0: 0x00000210 | hw version [83553.916025] iwlwifi 0000:02:00.0: 0x00489200 | board version [83553.916027] iwlwifi 0000:02:00.0: 0x0000001C | hcmd [83553.916029] iwlwifi 0000:02:00.0: 0x00022002 | isr0 [83553.916030] iwlwifi 0000:02:00.0: 0x01800000 | isr1 [83553.916032] iwlwifi 0000:02:00.0: 0x0000000A | isr2 [83553.916034] iwlwifi 0000:02:00.0: 0x004150C0 | isr3 [83553.916036] iwlwifi 0000:02:00.0: 0x00000000 | isr4 [83553.916038] iwlwifi 0000:02:00.0: 0x00000110 | isr_pref [83553.916040] iwlwifi 0000:02:00.0: 0x00000000 | wait_event [83553.916042] iwlwifi 0000:02:00.0: 0x0000822E | l2p_control [83553.916044] iwlwifi 0000:02:00.0: 0x00000020 | l2p_duration [83553.916045] iwlwifi 0000:02:00.0: 0x00000003 | l2p_mhvalid [83553.916047] iwlwifi 0000:02:00.0: 0x00000020 | l2p_addr_match [83553.916049] iwlwifi 0000:02:00.0: 0x00000005 | lmpm_pmg_sel [83553.916051] iwlwifi 0000:02:00.0: 0x13041313 | timestamp [83553.916053] iwlwifi 0000:02:00.0: 0x00347888 | flow_handler [83553.916058] ieee80211 phy0: Hardware restart was requested [83554.069281] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [83554.069490] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [84508.835973] wlp2s0: deauthenticating from a8:54:b2:90:ca:e4 by local choice (Reason: 3=DEAUTH_LEAVING) [84512.600959] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [84512.601164] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [84519.492837] wlp2s0: authenticate with a8:54:b2:90:ca:e4 [84519.496057] wlp2s0: send auth to a8:54:b2:90:ca:e4 (try 1/3) [84519.497917] wlp2s0: authenticated [84519.498621] wlp2s0: associate with a8:54:b2:90:ca:e4 (try 1/3) [84519.501851] wlp2s0: RX AssocResp from a8:54:b2:90:ca:e4 (capab=0x431 status=0 aid=1) [84519.503353] wlp2s0: associated [85292.570104] IPv6: ADDRCONF(NETDEV_CHANGE): vpn0: link becomes ready [85292.963273] IPv6: ADDRCONF(NETDEV_CHANGE): vpn0: link becomes ready [86864.871805] iwlwifi 0000:02:00.0: Queue 2 stuck for 10000 ms. [86864.871810] iwlwifi 0000:02:00.0: Current SW read_ptr 167 write_ptr 229 [86864.871852] iwl data: 00000000: 00 00 00 00 00 00 00 00 80 ff 3f 00 00 00 00 00 ..........?..... [86864.871876] iwlwifi 0000:02:00.0: FH TRBs(0) = 0x00000000 [86864.871897] iwlwifi 0000:02:00.0: FH TRBs(1) = 0x801020b5 [86864.871918] iwlwifi 0000:02:00.0: FH TRBs(2) = 0x00000000 [86864.871939] iwlwifi 0000:02:00.0: FH TRBs(3) = 0x8030001f [86864.871960] iwlwifi 0000:02:00.0: FH TRBs(4) = 0x00000000 [86864.871981] iwlwifi 0000:02:00.0: FH TRBs(5) = 0x00000000 [86864.872002] iwlwifi 0000:02:00.0: FH TRBs(6) = 0x00000000 [86864.872022] iwlwifi 0000:02:00.0: FH TRBs(7) = 0x00709083 [86864.872085] iwlwifi 0000:02:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [32,32] [86864.872146] iwlwifi 0000:02:00.0: Q 1 is active and mapped to fifo 2 ra_tid 0x0000 [0,0] [86864.872208] iwlwifi 0000:02:00.0: Q 2 is active and mapped to fifo 1 ra_tid 0x0000 [167,229] [86864.872270] iwlwifi 0000:02:00.0: Q 3 is active and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872331] iwlwifi 0000:02:00.0: Q 4 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872390] iwlwifi 0000:02:00.0: Q 5 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872448] iwlwifi 0000:02:00.0: Q 6 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872550] iwlwifi 0000:02:00.0: Q 7 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872656] iwlwifi 0000:02:00.0: Q 8 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872761] iwlwifi 0000:02:00.0: Q 9 is active and mapped to fifo 7 ra_tid 0x0000 [132,132] [86864.872845] iwlwifi 0000:02:00.0: Q 10 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872906] iwlwifi 0000:02:00.0: Q 11 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.872955] iwlwifi 0000:02:00.0: Q 12 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.873005] iwlwifi 0000:02:00.0: Q 13 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.873064] iwlwifi 0000:02:00.0: Q 14 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.873126] iwlwifi 0000:02:00.0: Q 15 is active and mapped to fifo 5 ra_tid 0x0000 [0,0] [86864.873188] iwlwifi 0000:02:00.0: Q 16 is inactive and mapped to fifo 1 ra_tid 0x0000 [241,241] [86864.873250] iwlwifi 0000:02:00.0: Q 17 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.873298] iwlwifi 0000:02:00.0: Q 18 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.873347] iwlwifi 0000:02:00.0: Q 19 is inactive and mapped to fifo 0 ra_tid 0x0000 [0,0] [86864.873403] iwlwifi 0000:02:00.0: Microcode SW error detected. Restarting 0x2000000. [86864.873405] iwlwifi 0000:02:00.0: CSR values: [86864.873407] iwlwifi 0000:02:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) [86864.873419] iwlwifi 0000:02:00.0: CSR_HW_IF_CONFIG_REG: 0X00489200 [86864.873434] iwlwifi 0000:02:00.0: CSR_INT_COALESCING: 0X00000040 [86864.873446] iwlwifi 0000:02:00.0: CSR_INT: 0X00000000 [86864.873457] iwlwifi 0000:02:00.0: CSR_INT_MASK: 0X00000000 [86864.873469] iwlwifi 0000:02:00.0: CSR_FH_INT_STATUS: 0X00000000 [86864.873481] iwlwifi 0000:02:00.0: CSR_GPIO_IN: 0X00000000 [86864.873497] iwlwifi 0000:02:00.0: CSR_RESET: 0X00000000 [86864.873512] iwlwifi 0000:02:00.0: CSR_GP_CNTRL: 0X080403c5 [86864.873527] iwlwifi 0000:02:00.0: CSR_HW_REV: 0X00000210 [86864.873543] iwlwifi 0000:02:00.0: CSR_EEPROM_REG: 0Xd55555d5 [86864.873558] iwlwifi 0000:02:00.0: CSR_EEPROM_GP: 0X00000000 [86864.873573] iwlwifi 0000:02:00.0: CSR_OTP_GP_REG: 0Xd55555d5 [86864.873588] iwlwifi 0000:02:00.0: CSR_GIO_REG: 0X00080042 [86864.873603] iwlwifi 0000:02:00.0: CSR_GP_UCODE_REG: 0X00000000 [86864.873615] iwlwifi 0000:02:00.0: CSR_GP_DRIVER_REG: 0X00000000 [86864.873626] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP1: 0X00000000 [86864.873638] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP2: 0X00000000 [86864.873649] iwlwifi 0000:02:00.0: CSR_LED_REG: 0X00000060 [86864.873661] iwlwifi 0000:02:00.0: CSR_DRAM_INT_TBL_REG: 0X880d9476 [86864.873673] iwlwifi 0000:02:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 [86864.873684] iwlwifi 0000:02:00.0: CSR_ANA_PLL_CFG: 0Xd55555d5 [86864.873696] iwlwifi 0000:02:00.0: CSR_MONITOR_STATUS_REG: 0Xebb7ff77 [86864.873712] iwlwifi 0000:02:00.0: CSR_HW_REV_WA_REG: 0X0001001a [86864.873727] iwlwifi 0000:02:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 [86864.873730] iwlwifi 0000:02:00.0: FH register values: [86864.873754] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X2131d100 [86864.873779] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X021033e0 [86864.873811] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_WPTR: 0X000000c8 [86864.873837] iwlwifi 0000:02:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X00801114 [86864.873858] iwlwifi 0000:02:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc [86864.873878] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X03030000 [86864.873890] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 [86864.873902] iwlwifi 0000:02:00.0: FH_TSSR_TX_STATUS_REG: 0X07fd0001 [86864.873913] iwlwifi 0000:02:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 [86864.874031] iwlwifi 0000:02:00.0: Start IWL Error Log Dump: [86864.874033] iwlwifi 0000:02:00.0: Status: 0x00000000, count: 6 [86864.874034] iwlwifi 0000:02:00.0: Loaded firmware version: 25.17.12.0 [86864.874036] iwlwifi 0000:02:00.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN [86864.874038] iwlwifi 0000:02:00.0: 0x00000230 | uPc [86864.874039] iwlwifi 0000:02:00.0: 0x00000000 | branchlink1 [86864.874041] iwlwifi 0000:02:00.0: 0x00042870 | branchlink2 [86864.874042] iwlwifi 0000:02:00.0: 0x00043154 | interruptlink1 [86864.874044] iwlwifi 0000:02:00.0: 0x00043154 | interruptlink2 [86864.874045] iwlwifi 0000:02:00.0: 0x00000000 | data1 [86864.874047] iwlwifi 0000:02:00.0: 0x00000080 | data2 [86864.874048] iwlwifi 0000:02:00.0: 0x07030000 | data3 [86864.874050] iwlwifi 0000:02:00.0: 0x4D4027CB | beacon time [86864.874051] iwlwifi 0000:02:00.0: 0x39C67846 | tsf low [86864.874053] iwlwifi 0000:02:00.0: 0x00000000 | tsf hi [86864.874054] iwlwifi 0000:02:00.0: 0x00000000 | time gp1 [86864.874055] iwlwifi 0000:02:00.0: 0x8C1E213D | time gp2 [86864.874057] iwlwifi 0000:02:00.0: 0x00000000 | time gp3 [86864.874058] iwlwifi 0000:02:00.0: 0x00041911 | uCode version [86864.874060] iwlwifi 0000:02:00.0: 0x00000210 | hw version [86864.874061] iwlwifi 0000:02:00.0: 0x00489200 | board version [86864.874063] iwlwifi 0000:02:00.0: 0x0000001C | hcmd [86864.874064] iwlwifi 0000:02:00.0: 0x24022002 | isr0 [86864.874066] iwlwifi 0000:02:00.0: 0x01800000 | isr1 [86864.874067] iwlwifi 0000:02:00.0: 0x0000000A | isr2 [86864.874069] iwlwifi 0000:02:00.0: 0x004140C0 | isr3 [86864.874070] iwlwifi 0000:02:00.0: 0x00000000 | isr4 [86864.874072] iwlwifi 0000:02:00.0: 0x00000110 | isr_pref [86864.874073] iwlwifi 0000:02:00.0: 0x00000000 | wait_event [86864.874075] iwlwifi 0000:02:00.0: 0x00000080 | l2p_control [86864.874076] iwlwifi 0000:02:00.0: 0x00010030 | l2p_duration [86864.874078] iwlwifi 0000:02:00.0: 0x0000003F | l2p_mhvalid [86864.874079] iwlwifi 0000:02:00.0: 0x000000CE | l2p_addr_match [86864.874081] iwlwifi 0000:02:00.0: 0x00000005 | lmpm_pmg_sel [86864.874082] iwlwifi 0000:02:00.0: 0x13041313 | timestamp [86864.874084] iwlwifi 0000:02:00.0: 0x0034C8D8 | flow_handler [86864.874087] ieee80211 phy0: Hardware restart was requested [86865.040868] iwlwifi 0000:02:00.0: Failing on timeout while stopping DMA channel 8 [0x07fd0001] [86865.041278] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [86865.041480] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [87025.198294] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [87129.249000] (NULL device *): FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 [87964.054523] perf interrupt took too long (5005 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 [88325.640098] wlp2s0: deauthenticating from a8:54:b2:90:ca:e4 by local choice (Reason: 3=DEAUTH_LEAVING) [88328.987676] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [88328.987887] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [88335.881037] wlp2s0: authenticate with a8:54:b2:90:ca:e4 [88335.884521] wlp2s0: send auth to a8:54:b2:90:ca:e4 (try 1/3) [88335.886311] wlp2s0: authenticated [88335.886506] wlp2s0: associate with a8:54:b2:90:ca:e4 (try 1/3) [88335.889801] wlp2s0: RX AssocResp from a8:54:b2:90:ca:e4 (capab=0x431 status=0 aid=1) [88335.893126] wlp2s0: associated [88341.095641] wlp2s0: deauthenticating from a8:54:b2:90:ca:e4 by local choice (Reason: 3=DEAUTH_LEAVING) [88346.176120] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [88346.176331] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled [88353.068841] wlp2s0: authenticate with a8:54:b2:90:ca:e4 [88353.072129] wlp2s0: send auth to a8:54:b2:90:ca:e4 (try 1/3) [88353.073953] wlp2s0: authenticated [88353.075060] wlp2s0: associate with a8:54:b2:90:ca:e4 (try 1/3) [88353.078301] wlp2s0: RX AssocResp from a8:54:b2:90:ca:e4 (capab=0x431 status=0 aid=1) [88353.083971] wlp2s0: associated [88430.644301] wlp2s0: deauthenticating from a8:54:b2:90:ca:e4 by local choice (Reason: 3=DEAUTH_LEAVING) [88434.048735] wlp2s0: authenticate with 7c:03:4c:71:c8:61 [88434.051570] wlp2s0: send auth to 7c:03:4c:71:c8:61 (try 1/3) [88434.053386] wlp2s0: authenticated [88434.053809] wlp2s0: associate with 7c:03:4c:71:c8:61 (try 1/3) [88434.056475] wlp2s0: RX AssocResp from 7c:03:4c:71:c8:61 (capab=0x411 status=0 aid=2) [88434.057891] wlp2s0: associated [88462.307280] IPv6: ADDRCONF(NETDEV_CHANGE): vpn0: link becomes ready ^ permalink raw reply [flat|nested] 17+ messages in thread
[parent not found: <20150727211502.GA2492-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org>]
* Re: Regression in v4.2-rc1 caused by hierarchical irqdomain changes 2015-07-27 21:15 ` Matt Fleming @ 2015-07-29 21:03 ` Thomas Gleixner -1 siblings, 0 replies; 17+ messages in thread From: Thomas Gleixner @ 2015-07-29 21:03 UTC (permalink / raw) To: Matt Fleming Cc: Jiang Liu, linux-kernel-u79uwXL29TY76Z2rM5mHXA, H. Peter Anvin, Ingo Molnar, Wolfram Sang, linux-i2c-u79uwXL29TY76Z2rM5mHXA On Mon, 27 Jul 2015, Matt Fleming wrote: > [BAD] > 3: 1 0 0 0 IR-IO-APIC 3-edge > 6: 0 0 0 0 IR-IO-APIC 6-edge dw_dmac > 7: 15 1 0 0 IR-IO-APIC 7-edge INT3432:00, INT3433:00 [GOOD] > 3: 16 17 49 20 IR-IO-APIC-fasteoi AudioDSP, dw_dmac > 6: 0 0 0 0 IR-IO-APIC-fasteoi dw_dmac > 7: 2662 3072 12307 5419 IR-IO-APIC-fasteoi INT3432:00, INT3433:00 So the old code uses fasteoi while the new one uses edge. Jiang???? ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Regression in v4.2-rc1 caused by hierarchical irqdomain changes @ 2015-07-29 21:03 ` Thomas Gleixner 0 siblings, 0 replies; 17+ messages in thread From: Thomas Gleixner @ 2015-07-29 21:03 UTC (permalink / raw) To: Matt Fleming Cc: Jiang Liu, linux-kernel, H. Peter Anvin, Ingo Molnar, Wolfram Sang, linux-i2c On Mon, 27 Jul 2015, Matt Fleming wrote: > [BAD] > 3: 1 0 0 0 IR-IO-APIC 3-edge > 6: 0 0 0 0 IR-IO-APIC 6-edge dw_dmac > 7: 15 1 0 0 IR-IO-APIC 7-edge INT3432:00, INT3433:00 [GOOD] > 3: 16 17 49 20 IR-IO-APIC-fasteoi AudioDSP, dw_dmac > 6: 0 0 0 0 IR-IO-APIC-fasteoi dw_dmac > 7: 2662 3072 12307 5419 IR-IO-APIC-fasteoi INT3432:00, INT3433:00 So the old code uses fasteoi while the new one uses edge. Jiang???? ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Regression in v4.2-rc1 caused by hierarchical irqdomain changes 2015-07-29 21:03 ` Thomas Gleixner @ 2015-07-30 4:08 ` Jiang Liu -1 siblings, 0 replies; 17+ messages in thread From: Jiang Liu @ 2015-07-30 4:08 UTC (permalink / raw) To: Thomas Gleixner, Matt Fleming Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, H. Peter Anvin, Ingo Molnar, Wolfram Sang, linux-i2c-u79uwXL29TY76Z2rM5mHXA On 2015/7/30 5:03, Thomas Gleixner wrote: > On Mon, 27 Jul 2015, Matt Fleming wrote: >> [BAD] >> 3: 1 0 0 0 IR-IO-APIC 3-edge >> 6: 0 0 0 0 IR-IO-APIC 6-edge dw_dmac >> 7: 15 1 0 0 IR-IO-APIC 7-edge INT3432:00, INT3433:00 > > [GOOD] >> 3: 16 17 49 20 IR-IO-APIC-fasteoi AudioDSP, dw_dmac >> 6: 0 0 0 0 IR-IO-APIC-fasteoi dw_dmac >> 7: 2662 3072 12307 5419 IR-IO-APIC-fasteoi INT3432:00, INT3433:00 > > So the old code uses fasteoi while the new one uses edge. > > Jiang???? Sorry for the slow response. We have reproduced this regression on Surface Pro 3, but are still trying to figure out the root cause. Thanks! Gerry ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Regression in v4.2-rc1 caused by hierarchical irqdomain changes @ 2015-07-30 4:08 ` Jiang Liu 0 siblings, 0 replies; 17+ messages in thread From: Jiang Liu @ 2015-07-30 4:08 UTC (permalink / raw) To: Thomas Gleixner, Matt Fleming Cc: linux-kernel, H. Peter Anvin, Ingo Molnar, Wolfram Sang, linux-i2c On 2015/7/30 5:03, Thomas Gleixner wrote: > On Mon, 27 Jul 2015, Matt Fleming wrote: >> [BAD] >> 3: 1 0 0 0 IR-IO-APIC 3-edge >> 6: 0 0 0 0 IR-IO-APIC 6-edge dw_dmac >> 7: 15 1 0 0 IR-IO-APIC 7-edge INT3432:00, INT3433:00 > > [GOOD] >> 3: 16 17 49 20 IR-IO-APIC-fasteoi AudioDSP, dw_dmac >> 6: 0 0 0 0 IR-IO-APIC-fasteoi dw_dmac >> 7: 2662 3072 12307 5419 IR-IO-APIC-fasteoi INT3432:00, INT3433:00 > > So the old code uses fasteoi while the new one uses edge. > > Jiang???? Sorry for the slow response. We have reproduced this regression on Surface Pro 3, but are still trying to figure out the root cause. Thanks! Gerry ^ permalink raw reply [flat|nested] 17+ messages in thread
* [Bugfix] x86, irq: Fix regression caused by commit d32932d02e18 2015-07-29 21:03 ` Thomas Gleixner (?) (?) @ 2015-07-30 7:51 ` Jiang Liu 2015-07-30 8:33 ` Thomas Gleixner ` (2 more replies) -1 siblings, 3 replies; 17+ messages in thread From: Jiang Liu @ 2015-07-30 7:51 UTC (permalink / raw) To: Thomas Gleixner, Ingo Molnar, Matt Fleming, Chen Yu, H. Peter Anvin, x86, Jiang Liu, Yinghai Lu Cc: Tony Luck, linux-kernel Commit d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") introduced a regression when converting IOAPIC to hierarchy irqdomain, which sets wrong irq flow handler for IOAPIC pins on Surface Pro 3 and causes failure when detecting I2C controllers. It's caused by using stale attribute value when setting up IOAPIC pins. With this patch applied, all IOAPIC IRQ configuration are identical to v4.1 on Surface Pro 3. Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Reported-by: Matt Fleming <matt@codeblueprint.co.uk> Tested-and-reported-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> --- Hi Matt, Could you please help to test this patch? Thanks! Gerry --- arch/x86/kernel/apic/io_apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 845dc0df2002..206052e55517 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -943,7 +943,7 @@ static bool mp_check_pin_attr(int irq, struct irq_alloc_info *info) */ if (irq < nr_legacy_irqs() && data->count == 1) { if (info->ioapic_trigger != data->trigger) - mp_register_handler(irq, data->trigger); + mp_register_handler(irq, info->ioapic_trigger); data->entry.trigger = data->trigger = info->ioapic_trigger; data->entry.polarity = data->polarity = info->ioapic_polarity; } -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [Bugfix] x86, irq: Fix regression caused by commit d32932d02e18 2015-07-30 7:51 ` [Bugfix] x86, irq: Fix regression caused by commit d32932d02e18 Jiang Liu @ 2015-07-30 8:33 ` Thomas Gleixner 2015-07-30 8:55 ` Jiang Liu 2015-07-30 9:07 ` Matt Fleming 2015-07-30 19:19 ` [tip:x86/urgent] x86/irq: Use the caller provided polarity setting in mp_check_pin_attr() tip-bot for Jiang Liu 2 siblings, 1 reply; 17+ messages in thread From: Thomas Gleixner @ 2015-07-30 8:33 UTC (permalink / raw) To: Jiang Liu Cc: Ingo Molnar, Matt Fleming, Chen Yu, H. Peter Anvin, x86, Yinghai Lu, Tony Luck, linux-kernel On Thu, 30 Jul 2015, Jiang Liu wrote: > Commit d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical > irqdomain interfaces") introduced a regression when converting IOAPIC > to hierarchy irqdomain, which sets wrong irq flow handler for IOAPIC > pins on Surface Pro 3 and causes failure when detecting I2C controllers. > It's caused by using stale attribute value when setting up IOAPIC pins. > With this patch applied, all IOAPIC IRQ configuration are identical > to v4.1 on Surface Pro 3. > > Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") > Reported-by: Matt Fleming <matt@codeblueprint.co.uk> > Tested-and-reported-by: Chen Yu <yu.c.chen@intel.com> > Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> > --- > Hi Matt, > Could you please help to test this patch? > Thanks! > Gerry > --- > arch/x86/kernel/apic/io_apic.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c > index 845dc0df2002..206052e55517 100644 > --- a/arch/x86/kernel/apic/io_apic.c > +++ b/arch/x86/kernel/apic/io_apic.c > @@ -943,7 +943,7 @@ static bool mp_check_pin_attr(int irq, struct irq_alloc_info *info) > */ > if (irq < nr_legacy_irqs() && data->count == 1) { > if (info->ioapic_trigger != data->trigger) > - mp_register_handler(irq, data->trigger); > + mp_register_handler(irq, info->ioapic_trigger); > data->entry.trigger = data->trigger = info->ioapic_trigger; > data->entry.polarity = data->polarity = info->ioapic_polarity; Pretty obvious, but I was staring at this very piece of code for hours without spotting it. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Bugfix] x86, irq: Fix regression caused by commit d32932d02e18 2015-07-30 8:33 ` Thomas Gleixner @ 2015-07-30 8:55 ` Jiang Liu 0 siblings, 0 replies; 17+ messages in thread From: Jiang Liu @ 2015-07-30 8:55 UTC (permalink / raw) To: Thomas Gleixner Cc: Ingo Molnar, Matt Fleming, Chen Yu, H. Peter Anvin, x86, Yinghai Lu, Tony Luck, linux-kernel On 2015/7/30 16:33, Thomas Gleixner wrote: > On Thu, 30 Jul 2015, Jiang Liu wrote: > >> Commit d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical >> irqdomain interfaces") introduced a regression when converting IOAPIC >> to hierarchy irqdomain, which sets wrong irq flow handler for IOAPIC >> pins on Surface Pro 3 and causes failure when detecting I2C controllers. >> It's caused by using stale attribute value when setting up IOAPIC pins. >> With this patch applied, all IOAPIC IRQ configuration are identical >> to v4.1 on Surface Pro 3. >> >> Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") >> Reported-by: Matt Fleming <matt@codeblueprint.co.uk> >> Tested-and-reported-by: Chen Yu <yu.c.chen@intel.com> >> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> >> --- >> Hi Matt, >> Could you please help to test this patch? >> Thanks! >> Gerry >> --- >> arch/x86/kernel/apic/io_apic.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c >> index 845dc0df2002..206052e55517 100644 >> --- a/arch/x86/kernel/apic/io_apic.c >> +++ b/arch/x86/kernel/apic/io_apic.c >> @@ -943,7 +943,7 @@ static bool mp_check_pin_attr(int irq, struct irq_alloc_info *info) >> */ >> if (irq < nr_legacy_irqs() && data->count == 1) { >> if (info->ioapic_trigger != data->trigger) >> - mp_register_handler(irq, data->trigger); >> + mp_register_handler(irq, info->ioapic_trigger); >> data->entry.trigger = data->trigger = info->ioapic_trigger; >> data->entry.polarity = data->polarity = info->ioapic_polarity; > > Pretty obvious, but I was staring at this very piece of code for hours > without spotting it. You have given me the most valuable hints about the difference in irq flow handler:) ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Bugfix] x86, irq: Fix regression caused by commit d32932d02e18 2015-07-30 7:51 ` [Bugfix] x86, irq: Fix regression caused by commit d32932d02e18 Jiang Liu 2015-07-30 8:33 ` Thomas Gleixner @ 2015-07-30 9:07 ` Matt Fleming 2015-07-30 9:12 ` Jiang Liu 2015-07-30 19:19 ` [tip:x86/urgent] x86/irq: Use the caller provided polarity setting in mp_check_pin_attr() tip-bot for Jiang Liu 2 siblings, 1 reply; 17+ messages in thread From: Matt Fleming @ 2015-07-30 9:07 UTC (permalink / raw) To: Jiang Liu Cc: Thomas Gleixner, Ingo Molnar, Chen Yu, H. Peter Anvin, x86, Yinghai Lu, Tony Luck, linux-kernel On Thu, 30 Jul, at 03:51:32PM, Jiang Liu wrote: > Commit d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical > irqdomain interfaces") introduced a regression when converting IOAPIC > to hierarchy irqdomain, which sets wrong irq flow handler for IOAPIC > pins on Surface Pro 3 and causes failure when detecting I2C controllers. > It's caused by using stale attribute value when setting up IOAPIC pins. > With this patch applied, all IOAPIC IRQ configuration are identical > to v4.1 on Surface Pro 3. > > Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") > Reported-by: Matt Fleming <matt@codeblueprint.co.uk> > Tested-and-reported-by: Chen Yu <yu.c.chen@intel.com> > Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> > --- > Hi Matt, > Could you please help to test this patch? > Thanks! > Gerry > --- > arch/x86/kernel/apic/io_apic.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) Works for me! What I actually did was apply this fixup commit ontop of commit d32932d02e18, just to be sure that it fixes the issue. I'm about to apply it on top of -rc4 just to be sure. But failing any issues arising, Tested-by: Matt Fleming <matt.fleming@intel.com> -- Matt Fleming, Intel Open Source Technology Center ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Bugfix] x86, irq: Fix regression caused by commit d32932d02e18 2015-07-30 9:07 ` Matt Fleming @ 2015-07-30 9:12 ` Jiang Liu 2015-07-30 9:46 ` Matt Fleming 0 siblings, 1 reply; 17+ messages in thread From: Jiang Liu @ 2015-07-30 9:12 UTC (permalink / raw) To: Matt Fleming Cc: Thomas Gleixner, Ingo Molnar, Chen Yu, H. Peter Anvin, x86, Yinghai Lu, Tony Luck, linux-kernel On 2015/7/30 17:07, Matt Fleming wrote: > On Thu, 30 Jul, at 03:51:32PM, Jiang Liu wrote: >> Commit d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical >> irqdomain interfaces") introduced a regression when converting IOAPIC >> to hierarchy irqdomain, which sets wrong irq flow handler for IOAPIC >> pins on Surface Pro 3 and causes failure when detecting I2C controllers. >> It's caused by using stale attribute value when setting up IOAPIC pins. >> With this patch applied, all IOAPIC IRQ configuration are identical >> to v4.1 on Surface Pro 3. >> >> Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") >> Reported-by: Matt Fleming <matt@codeblueprint.co.uk> >> Tested-and-reported-by: Chen Yu <yu.c.chen@intel.com> >> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> >> --- >> Hi Matt, >> Could you please help to test this patch? >> Thanks! >> Gerry >> --- >> arch/x86/kernel/apic/io_apic.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) > > Works for me! What I actually did was apply this fixup commit ontop of > commit d32932d02e18, just to be sure that it fixes the issue. I'm about > to apply it on top of -rc4 just to be sure. Hi Matt, Chen found there are other issues with 4.2-rc4 which breaks Surface Pro 3's I2C and multitouch drivers. If you run into the same trouble, please contact Chen Yu <yu.c.chen@intel.com> for details:) Thanks! Gerry ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Bugfix] x86, irq: Fix regression caused by commit d32932d02e18 2015-07-30 9:12 ` Jiang Liu @ 2015-07-30 9:46 ` Matt Fleming 0 siblings, 0 replies; 17+ messages in thread From: Matt Fleming @ 2015-07-30 9:46 UTC (permalink / raw) To: Jiang Liu Cc: Thomas Gleixner, Ingo Molnar, Chen Yu, H. Peter Anvin, x86, Yinghai Lu, Tony Luck, linux-kernel On Thu, 30 Jul, at 05:12:39PM, Jiang Liu wrote: > Hi Matt, > Chen found there are other issues with 4.2-rc4 which > breaks Surface Pro 3's I2C and multitouch drivers. If you run into > the same trouble, please contact Chen Yu <yu.c.chen@intel.com> > for details:) No i2c/multitouch issues here on v4.2-rc4, everything works fine! -- Matt Fleming, Intel Open Source Technology Center ^ permalink raw reply [flat|nested] 17+ messages in thread
* [tip:x86/urgent] x86/irq: Use the caller provided polarity setting in mp_check_pin_attr() 2015-07-30 7:51 ` [Bugfix] x86, irq: Fix regression caused by commit d32932d02e18 Jiang Liu 2015-07-30 8:33 ` Thomas Gleixner 2015-07-30 9:07 ` Matt Fleming @ 2015-07-30 19:19 ` tip-bot for Jiang Liu 2 siblings, 0 replies; 17+ messages in thread From: tip-bot for Jiang Liu @ 2015-07-30 19:19 UTC (permalink / raw) To: linux-tip-commits Cc: matt, hpa, yinghai, tony.luck, mingo, jiang.liu, tglx, linux-kernel, yu.c.chen Commit-ID: 646c4b75494747887f936513b669bb8a2d794459 Gitweb: http://git.kernel.org/tip/646c4b75494747887f936513b669bb8a2d794459 Author: Jiang Liu <jiang.liu@linux.intel.com> AuthorDate: Thu, 30 Jul 2015 15:51:32 +0800 Committer: Thomas Gleixner <tglx@linutronix.de> CommitDate: Thu, 30 Jul 2015 21:15:29 +0200 x86/irq: Use the caller provided polarity setting in mp_check_pin_attr() Commit d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") introduced a regression which causes malfunction of interrupt lines. The reason is that the conversion of mp_check_pin_attr() missed to update the polarity selection of the interrupt pin with the caller provided setting and instead uses a stale attribute value. That in turn results in chosing the wrong interrupt flow handler. Use the caller supplied setting to configure the pin correctly which also choses the correct interrupt flow handler. This restores the original behaviour and on the affected machine/driver (Surface Pro 3, i2c controller) all IOAPIC IRQ configuration are identical to v4.1. Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Reported-and-tested-by: Matt Fleming <matt@codeblueprint.co.uk> Reported-and-tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Chen Yu <yu.c.chen@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1438242695-23531-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> --- arch/x86/kernel/apic/io_apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 845dc0d..206052e 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -943,7 +943,7 @@ static bool mp_check_pin_attr(int irq, struct irq_alloc_info *info) */ if (irq < nr_legacy_irqs() && data->count == 1) { if (info->ioapic_trigger != data->trigger) - mp_register_handler(irq, data->trigger); + mp_register_handler(irq, info->ioapic_trigger); data->entry.trigger = data->trigger = info->ioapic_trigger; data->entry.polarity = data->polarity = info->ioapic_polarity; } ^ permalink raw reply related [flat|nested] 17+ messages in thread
end of thread, other threads:[~2015-07-30 19:19 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-07-27 15:21 Regression in v4.2-rc1 caused by hierarchical irqdomain changes Matt Fleming
2015-07-27 15:21 ` Matt Fleming
[not found] ` <20150727152107.GA3571-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org>
2015-07-27 16:35 ` Jiang Liu
2015-07-27 16:35 ` Jiang Liu
[not found] ` <55B65DD8.9020002-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-07-27 21:15 ` Matt Fleming
2015-07-27 21:15 ` Matt Fleming
[not found] ` <20150727211502.GA2492-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org>
2015-07-29 21:03 ` Thomas Gleixner
2015-07-29 21:03 ` Thomas Gleixner
2015-07-30 4:08 ` Jiang Liu
2015-07-30 4:08 ` Jiang Liu
2015-07-30 7:51 ` [Bugfix] x86, irq: Fix regression caused by commit d32932d02e18 Jiang Liu
2015-07-30 8:33 ` Thomas Gleixner
2015-07-30 8:55 ` Jiang Liu
2015-07-30 9:07 ` Matt Fleming
2015-07-30 9:12 ` Jiang Liu
2015-07-30 9:46 ` Matt Fleming
2015-07-30 19:19 ` [tip:x86/urgent] x86/irq: Use the caller provided polarity setting in mp_check_pin_attr() tip-bot for Jiang Liu
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.