From: Tony Lindgren <tony@atomide.com>
To: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: tglx@linutronix.de, marc.zyngier@arm.com, linux@arm.linux.org.uk,
nsekhar@ti.com, jason@lakedaemon.net, balbi@ti.com,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 5/6] ARM: OMAP: wakeupgen: fix arm gic irq type configuration
Date: Thu, 13 Aug 2015 02:50:48 -0700 [thread overview]
Message-ID: <20150813095048.GA4215@atomide.com> (raw)
In-Reply-To: <1439401562-28874-6-git-send-email-grygorii.strashko@ti.com>
* Grygorii Strashko <grygorii.strashko@ti.com> [150812 10:49]:
> It's observed that ARM GIC IRQ triggering type is not configured
> properly when IRQ is routed through IRQ domain hierarchy and
> system started using DT. As result, system will start using default
> ARM GIC configuration, ignore DT IRQ triggering configuration,
> and value of desc->irq_data.state_use_accessors = 0.
>
> In case of TI OMAP DRA7 the following IRQ hierarchy is defined:
> ARM GIC <- OMAP wakeupgen <- TI CBAR
>
> Failed call chain:
> irq_create_of_mapping
> irq_set_irq_type
> __irq_set_trigger
> if (!chip || !chip->irq_set_type) {
> return 0; <- return here
> }
> OMAP wakeupgen has no .irq_set_type() defined and, so, IRQ triggering
> configuration will not be propagated to parent IRQ domain.
>
> Hence, fix it by using irq_chip_set_type_parent() for
> propagation IRQ triggering type to parent IRQ domains.
>
> Fixes: 7136d457f365 ('ARM: omap: convert wakeupgen to stacked domains')
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Makse sense to merge this along with the irqchip changes once those
are ready, so feel free to add to this one:
Acked-by: Tony Lindgren <tony@atomide.com>
> ---
> arch/arm/mach-omap2/omap-wakeupgen.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
> index 8e52621..e1d2e99 100644
> --- a/arch/arm/mach-omap2/omap-wakeupgen.c
> +++ b/arch/arm/mach-omap2/omap-wakeupgen.c
> @@ -392,6 +392,7 @@ static struct irq_chip wakeupgen_chip = {
> .irq_mask = wakeupgen_mask,
> .irq_unmask = wakeupgen_unmask,
> .irq_retrigger = irq_chip_retrigger_hierarchy,
> + .irq_set_type = irq_chip_set_type_parent,
> .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND,
> #ifdef CONFIG_SMP
> .irq_set_affinity = irq_chip_set_affinity_parent,
> --
> 2.5.0
>
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 5/6] ARM: OMAP: wakeupgen: fix arm gic irq type configuration
Date: Thu, 13 Aug 2015 02:50:48 -0700 [thread overview]
Message-ID: <20150813095048.GA4215@atomide.com> (raw)
In-Reply-To: <1439401562-28874-6-git-send-email-grygorii.strashko@ti.com>
* Grygorii Strashko <grygorii.strashko@ti.com> [150812 10:49]:
> It's observed that ARM GIC IRQ triggering type is not configured
> properly when IRQ is routed through IRQ domain hierarchy and
> system started using DT. As result, system will start using default
> ARM GIC configuration, ignore DT IRQ triggering configuration,
> and value of desc->irq_data.state_use_accessors = 0.
>
> In case of TI OMAP DRA7 the following IRQ hierarchy is defined:
> ARM GIC <- OMAP wakeupgen <- TI CBAR
>
> Failed call chain:
> irq_create_of_mapping
> irq_set_irq_type
> __irq_set_trigger
> if (!chip || !chip->irq_set_type) {
> return 0; <- return here
> }
> OMAP wakeupgen has no .irq_set_type() defined and, so, IRQ triggering
> configuration will not be propagated to parent IRQ domain.
>
> Hence, fix it by using irq_chip_set_type_parent() for
> propagation IRQ triggering type to parent IRQ domains.
>
> Fixes: 7136d457f365 ('ARM: omap: convert wakeupgen to stacked domains')
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Makse sense to merge this along with the irqchip changes once those
are ready, so feel free to add to this one:
Acked-by: Tony Lindgren <tony@atomide.com>
> ---
> arch/arm/mach-omap2/omap-wakeupgen.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
> index 8e52621..e1d2e99 100644
> --- a/arch/arm/mach-omap2/omap-wakeupgen.c
> +++ b/arch/arm/mach-omap2/omap-wakeupgen.c
> @@ -392,6 +392,7 @@ static struct irq_chip wakeupgen_chip = {
> .irq_mask = wakeupgen_mask,
> .irq_unmask = wakeupgen_unmask,
> .irq_retrigger = irq_chip_retrigger_hierarchy,
> + .irq_set_type = irq_chip_set_type_parent,
> .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND,
> #ifdef CONFIG_SMP
> .irq_set_affinity = irq_chip_set_affinity_parent,
> --
> 2.5.0
>
next prev parent reply other threads:[~2015-08-13 9:50 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-12 17:45 [PATCH v2 0/6] genirq: irqdomain_hierarchy: fixes Grygorii Strashko
2015-08-12 17:45 ` Grygorii Strashko
2015-08-12 17:45 ` Grygorii Strashko
2015-08-12 17:45 ` [PATCH v2 1/6] genirq: fix irq_chip_retrigger_hierarchy Grygorii Strashko
2015-08-12 17:45 ` Grygorii Strashko
2015-08-12 17:45 ` Grygorii Strashko
2015-08-13 9:26 ` Marc Zyngier
2015-08-13 9:26 ` Marc Zyngier
2015-08-12 17:45 ` [PATCH v2 2/6] genirq: fix irqchip_set_wake_parent if IRQCHIP_SKIP_SET_WAKE Grygorii Strashko
2015-08-12 17:45 ` Grygorii Strashko
2015-08-12 17:45 ` Grygorii Strashko
2015-08-13 8:54 ` Sudeep Holla
2015-08-13 8:54 ` Sudeep Holla
2015-08-13 9:51 ` Grygorii Strashko
2015-08-13 9:51 ` Grygorii Strashko
2015-08-13 10:33 ` Sudeep Holla
2015-08-13 10:33 ` Sudeep Holla
2015-08-13 10:01 ` Marc Zyngier
2015-08-13 10:01 ` Marc Zyngier
2015-08-13 10:31 ` Grygorii Strashko
2015-08-13 10:31 ` Grygorii Strashko
2015-08-13 12:58 ` Grygorii Strashko
2015-08-13 12:58 ` Grygorii Strashko
2015-08-14 10:18 ` Grygorii Strashko
2015-08-14 10:18 ` Grygorii Strashko
2015-08-14 10:18 ` Grygorii Strashko
2015-08-14 10:39 ` Marc Zyngier
2015-08-14 10:39 ` Marc Zyngier
2015-08-12 17:45 ` [PATCH v2 3/6] genirq: introduce irq_chip_set_type_parent() helper Grygorii Strashko
2015-08-12 17:45 ` Grygorii Strashko
2015-08-12 17:45 ` Grygorii Strashko
2015-08-13 8:58 ` Sudeep Holla
2015-08-13 8:58 ` Sudeep Holla
2015-08-13 9:54 ` Grygorii Strashko
2015-08-13 9:54 ` Grygorii Strashko
2015-08-12 17:46 ` [PATCH v2 4/6] irqchip: crossbar: fix arm gic irq type configuration Grygorii Strashko
2015-08-12 17:46 ` Grygorii Strashko
2015-08-12 17:46 ` Grygorii Strashko
2015-08-12 17:46 ` [PATCH v2 5/6] ARM: OMAP: wakeupgen: " Grygorii Strashko
2015-08-12 17:46 ` Grygorii Strashko
2015-08-12 17:46 ` Grygorii Strashko
2015-08-13 9:50 ` Tony Lindgren [this message]
2015-08-13 9:50 ` Tony Lindgren
2015-08-12 17:46 ` [PATCH v2 6/6] irqchip: crossbar: fix irq masking at suspend Grygorii Strashko
2015-08-12 17:46 ` Grygorii Strashko
2015-08-12 17:46 ` Grygorii Strashko
2015-08-13 9:30 ` Sudeep Holla
2015-08-13 9:30 ` Sudeep Holla
2015-08-13 10:17 ` Grygorii Strashko
2015-08-13 10:17 ` Grygorii Strashko
2015-08-13 11:04 ` Sudeep Holla
2015-08-13 11:04 ` Sudeep Holla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150813095048.GA4215@atomide.com \
--to=tony@atomide.com \
--cc=balbi@ti.com \
--cc=grygorii.strashko@ti.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=marc.zyngier@arm.com \
--cc=nsekhar@ti.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.