From: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Mike Marciniszyn
<mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Ira Weiny <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v3 11/36] IB/rdmavt: Add queue pair function stubs
Date: Wed, 06 Jan 2016 09:56:15 -0800 [thread overview]
Message-ID: <20160106175544.8747.13499.stgit@scvm10.sc.intel.com> (raw)
In-Reply-To: <20160106174638.8747.47197.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
Adds the stubs for create, modify, destroy and query functions for queue
pairs.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Reviewed-by: Ira Weiny <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
Changes since v1:
Change stubs to return EOPNOTSUPP
drivers/infiniband/sw/rdmavt/Makefile | 2 -
drivers/infiniband/sw/rdmavt/qp.c | 120 +++++++++++++++++++++++++++++++++
drivers/infiniband/sw/rdmavt/qp.h | 67 ++++++++++++++++++
drivers/infiniband/sw/rdmavt/vt.c | 6 ++
drivers/infiniband/sw/rdmavt/vt.h | 1
5 files changed, 195 insertions(+), 1 deletions(-)
create mode 100644 drivers/infiniband/sw/rdmavt/qp.c
create mode 100644 drivers/infiniband/sw/rdmavt/qp.h
diff --git a/drivers/infiniband/sw/rdmavt/Makefile b/drivers/infiniband/sw/rdmavt/Makefile
index c6751bb..9a9a095 100644
--- a/drivers/infiniband/sw/rdmavt/Makefile
+++ b/drivers/infiniband/sw/rdmavt/Makefile
@@ -7,5 +7,5 @@
#
obj-$(CONFIG_INFINIBAND_RDMAVT) += rdmavt.o
-rdmavt-y := vt.o dma.o pd.o
+rdmavt-y := vt.o dma.o pd.o qp.o
diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c
new file mode 100644
index 0000000..a59f28d
--- /dev/null
+++ b/drivers/infiniband/sw/rdmavt/qp.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include "qp.h"
+
+/**
+ * rvt_create_qp - create a queue pair for a device
+ * @ibpd: the protection domain who's device we create the queue pair for
+ * @init_attr: the attributes of the queue pair
+ * @udata: user data for libibverbs.so
+ *
+ * Returns the queue pair on success, otherwise returns an errno.
+ *
+ * Called by the ib_create_qp() core verbs function.
+ */
+struct ib_qp *rvt_create_qp(struct ib_pd *ibpd,
+ struct ib_qp_init_attr *init_attr,
+ struct ib_udata *udata)
+{
+ /*
+ * Queue pair creation is mostly an rvt issue. However, drivers have
+ * their own unique idea of what queue pare numbers mean. For instance
+ * there is a reserved range for PSM.
+ *
+ * VI-DRIVER-API: make_qpn()
+ * Returns a valid QPN for verbs to use
+ */
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
+/**
+ * qib_modify_qp - modify the attributes of a queue pair
+ * @ibqp: the queue pair who's attributes we're modifying
+ * @attr: the new attributes
+ * @attr_mask: the mask of attributes to modify
+ * @udata: user data for libibverbs.so
+ *
+ * Returns 0 on success, otherwise returns an errno.
+ */
+int rvt_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
+ int attr_mask, struct ib_udata *udata)
+{
+ /*
+ * VT-DRIVER-API: qp_mtu()
+ * OPA devices have a per VL MTU the driver has a mapping of IB SL to SC
+ * to VL and the mapping table of MTUs per VL. This is not something
+ * that IB has and should not live in the rvt.
+ */
+ return -EOPNOTSUPP;
+}
+
+/**
+ * rvt_destroy_qp - destroy a queue pair
+ * @ibqp: the queue pair to destroy
+ *
+ * Returns 0 on success.
+ *
+ * Note that this can be called while the QP is actively sending or
+ * receiving!
+ */
+int rvt_destroy_qp(struct ib_qp *ibqp)
+{
+ /*
+ * VT-DRIVER-API: qp_flush()
+ * Driver provies a mechanism to flush and wait for that flush to
+ * finish.
+ */
+
+ return -EOPNOTSUPP;
+}
+
+int rvt_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
+ int attr_mask, struct ib_qp_init_attr *init_attr)
+{
+ return -EOPNOTSUPP;
+}
diff --git a/drivers/infiniband/sw/rdmavt/qp.h b/drivers/infiniband/sw/rdmavt/qp.h
new file mode 100644
index 0000000..43acba0
--- /dev/null
+++ b/drivers/infiniband/sw/rdmavt/qp.h
@@ -0,0 +1,67 @@
+#ifndef DEF_RVTQP_H
+#define DEF_RVTQP_H
+
+/*
+ * Copyright(c) 2015 Intel Corporation.
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <rdma/rdma_vt.h>
+
+struct rvt_qp {
+ struct ib_qp *ibqp;
+ /* Other stuff */
+};
+
+struct ib_qp *rvt_create_qp(struct ib_pd *ibpd,
+ struct ib_qp_init_attr *init_attr,
+ struct ib_udata *udata);
+int rvt_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
+ int attr_mask, struct ib_udata *udata);
+int rvt_destroy_qp(struct ib_qp *ibqp);
+int rvt_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
+ int attr_mask, struct ib_qp_init_attr *init_attr);
+
+#endif /* DEF_RVTQP_H */
diff --git a/drivers/infiniband/sw/rdmavt/vt.c b/drivers/infiniband/sw/rdmavt/vt.c
index cd19429..07b0ada 100644
--- a/drivers/infiniband/sw/rdmavt/vt.c
+++ b/drivers/infiniband/sw/rdmavt/vt.c
@@ -220,6 +220,12 @@ int rvt_register_device(struct rvt_dev_info *rdi)
CHECK_DRIVER_OVERRIDE(rdi, alloc_ucontext);
CHECK_DRIVER_OVERRIDE(rdi, dealloc_ucontext);
+ /* Queue Pairs */
+ CHECK_DRIVER_OVERRIDE(rdi, create_qp);
+ CHECK_DRIVER_OVERRIDE(rdi, modify_qp);
+ CHECK_DRIVER_OVERRIDE(rdi, destroy_qp);
+ CHECK_DRIVER_OVERRIDE(rdi, query_qp);
+
/* DMA Operations */
rdi->ibdev.dma_ops =
rdi->ibdev.dma_ops ? : &rvt_default_dma_mapping_ops;
diff --git a/drivers/infiniband/sw/rdmavt/vt.h b/drivers/infiniband/sw/rdmavt/vt.h
index ba2f806..8758f25 100644
--- a/drivers/infiniband/sw/rdmavt/vt.h
+++ b/drivers/infiniband/sw/rdmavt/vt.h
@@ -51,5 +51,6 @@
#include <rdma/rdma_vt.h>
#include "dma.h"
#include "pd.h"
+#include "qp.h"
#endif /* DEF_RDMAVT_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-01-06 17:56 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-06 17:49 [PATCH v3 00/36] Add rdma verbs transport library Dennis Dalessandro
[not found] ` <20160106174638.8747.47197.stgit-9QXIwq+3FY+1XWohqUldA0EOCMrvLtNR@public.gmane.org>
2016-01-06 17:50 ` [PATCH v3 01/36] IB/rdmavt: Create module framework and handle driver registration Dennis Dalessandro
2016-01-06 17:51 ` [PATCH v3 02/36] IB/rdmavt: Consolidate dma ops in rdmavt Dennis Dalessandro
2016-01-06 17:51 ` [PATCH v3 03/36] IB/rdmavt: Add protection domain to rdmavt Dennis Dalessandro
2016-01-06 17:52 ` [PATCH v3 04/36] IB/rdmavt: Add ib core device attributes to rvt driver params list Dennis Dalessandro
2016-01-06 17:52 ` [PATCH v3 05/36] IB/rdmavt: Macroize override checks during driver registration Dennis Dalessandro
2016-01-06 17:53 ` [PATCH v3 06/36] IB/rdmavt: Add query and modify device stubs Dennis Dalessandro
2016-01-06 17:54 ` [PATCH v3 07/36] IB/rdmavt: Add query and modify port stubs Dennis Dalessandro
2016-01-06 17:54 ` [PATCH v3 08/36] IB/rdmavt: Add pkey query stub Dennis Dalessandro
2016-01-06 17:54 ` [PATCH v3 09/36] IB/rdmavt: Add query gid stub Dennis Dalessandro
2016-01-06 17:55 ` [PATCH v3 10/36] IB/rdmavt: Alloc and dealloc ucontexts Dennis Dalessandro
2016-01-06 17:56 ` Dennis Dalessandro [this message]
2016-01-06 17:56 ` [PATCH v3 12/36] IB/rdmavt: Add address handle stubs Dennis Dalessandro
2016-01-06 17:57 ` [PATCH v3 13/36] IB/rdmavt: Add memory region stubs Dennis Dalessandro
2016-01-06 17:57 ` [PATCH v3 14/36] IB/rdmavt: Add SRQ stubs Dennis Dalessandro
2016-01-06 17:58 ` [PATCH v3 15/36] IB/rdmavt: Add multicast stubs Dennis Dalessandro
2016-01-06 17:58 ` [PATCH v3 16/36] IB/rdmavt: Add process MAD stub Dennis Dalessandro
2016-01-06 17:59 ` [PATCH v3 17/36] IB/rdmavt: Add mmap stub Dennis Dalessandro
2016-01-06 17:59 ` [PATCH v3 18/36] IB/rdmavt: Add get port immutable stub Dennis Dalessandro
2016-01-06 18:00 ` [PATCH v3 19/36] IB/rdmavt: Add completion queue function stubs Dennis Dalessandro
2016-01-06 18:01 ` [PATCH v3 20/36] IB/rdmavt: Add post send and recv stubs Dennis Dalessandro
2016-01-06 18:01 ` [PATCH v3 21/36] IB/rdmavt: Move MR datastructures into rvt Dennis Dalessandro
2016-01-06 18:02 ` [PATCH v3 22/36] IB/rdmavt: Add queue pair data structure to rdmavt Dennis Dalessandro
2016-01-06 18:02 ` [PATCH v3 23/36] IB/rdmavt: Move driver helper functions to a common structure Dennis Dalessandro
2016-01-06 18:02 ` [PATCH v3 24/36] IB/rdmavt: Add device specific info prints Dennis Dalessandro
2016-01-06 18:03 ` [PATCH v3 25/36] IB/rdmavt: Add the start of capability flags Dennis Dalessandro
2016-01-06 18:03 ` [PATCH v3 26/36] IB/rdmavt: Move memory registration into rdmavt Dennis Dalessandro
2016-01-06 18:03 ` [PATCH v3 27/36] IB/rdmavt: Do not use rvt prints which rely on driver too early Dennis Dalessandro
2016-01-06 18:03 ` [PATCH v3 28/36] IB/rdmavt: Add common LID defines to rdmavt Dennis Dalessandro
2016-01-06 18:03 ` [PATCH v3 29/36] IB/rdmavt: Add AH " Dennis Dalessandro
2016-01-06 18:04 ` [PATCH v3 30/36] IB/rdmavt: Move SRQ data structure into rdmavt Dennis Dalessandro
2016-01-06 18:04 ` [PATCH v3 31/36] IB/rdmavt: Add an ibport data structure to rdmavt Dennis Dalessandro
2016-01-06 18:04 ` [PATCH v3 32/36] IB/rdmavt: Add driver notification for new AH Dennis Dalessandro
2016-01-06 18:04 ` [PATCH v3 33/36] IB/rdmavt: Break rdma_vt main include header file up Dennis Dalessandro
2016-01-06 18:04 ` [PATCH v3 34/36] IB/rdmavt: Initialize and teardown of qpn table Dennis Dalessandro
2016-01-06 18:04 ` [PATCH v3 35/36] IB/rdmavt: Add mmap related functions Dennis Dalessandro
2016-01-06 18:05 ` [PATCH v3 36/36] IB/rdmavt: Add pkey support Dennis Dalessandro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160106175544.8747.13499.stgit@scvm10.sc.intel.com \
--to=dennis.dalessandro-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mike.marciniszyn-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.