From: Tony Lindgren <tony@atomide.com>
To: Eduard Gavin <egavin@iseebcn.com>
Cc: "Menon, Nishanth" <nm@ti.com>,
"Enric Balletbo i Serra" <eballetbo@iseebcn.com>,
"Agustí Fontquerni" <af@iseebcn.com>,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM: dts: omap5-igep0050: Correct hdmi regulator
Date: Thu, 12 May 2016 09:57:56 -0700 [thread overview]
Message-ID: <20160512165755.GR5995@atomide.com> (raw)
In-Reply-To: <CAPjucKb2PLSZcD3YZ9xQk1F62ugFaGAkBBqMp5GmoWFd0H8Vfg@mail.gmail.com>
* Eduard Gavin <egavin@iseebcn.com> [160509 07:43]:
> Dear Nishanth,
> In igepV5 the LDO7 is connected to:
> VDDA_DSIPORTA - ball AA33
> VDDA_DSIPORTC - ball AE33
> VDDA_HDMI - ball AN25
> LDO4 is connected to:
> VPP1 - ball AD9
Thanks for the info, here's an updated patch with comments and now
using 1.8V instead of the 2.0V omap5-board-common.dtsi.
Regards,
Tony
8< -----------------
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 9 May 2016 07:51:00 -0700
Subject: [PATCH] ARM: dts: Fix ldo7 source for HDMI on igepv5
Fix ldo7 source for HDMI on igepv5.
Suggested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -35,6 +35,16 @@
};
};
+/*
+ * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33
+ * VDDA_HDMI - ball AN25. LDO4 is: VPP1 - ball AD9.
+ */
+&ldo7_reg {
+ status = "okay";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
&omap5_pmx_core {
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: omap5-igep0050: Correct hdmi regulator
Date: Thu, 12 May 2016 09:57:56 -0700 [thread overview]
Message-ID: <20160512165755.GR5995@atomide.com> (raw)
In-Reply-To: <CAPjucKb2PLSZcD3YZ9xQk1F62ugFaGAkBBqMp5GmoWFd0H8Vfg@mail.gmail.com>
* Eduard Gavin <egavin@iseebcn.com> [160509 07:43]:
> Dear Nishanth,
> In igepV5 the LDO7 is connected to:
> VDDA_DSIPORTA - ball AA33
> VDDA_DSIPORTC - ball AE33
> VDDA_HDMI - ball AN25
> LDO4 is connected to:
> VPP1 - ball AD9
Thanks for the info, here's an updated patch with comments and now
using 1.8V instead of the 2.0V omap5-board-common.dtsi.
Regards,
Tony
8< -----------------
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 9 May 2016 07:51:00 -0700
Subject: [PATCH] ARM: dts: Fix ldo7 source for HDMI on igepv5
Fix ldo7 source for HDMI on igepv5.
Suggested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -35,6 +35,16 @@
};
};
+/*
+ * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33
+ * VDDA_HDMI - ball AN25. LDO4 is: VPP1 - ball AD9.
+ */
+&ldo7_reg {
+ status = "okay";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
&omap5_pmx_core {
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
next prev parent reply other threads:[~2016-05-12 16:57 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-29 10:21 [PATCH] ARM: dts: omap5-igep0050: Correct hdmi regulator Peter Ujfalusi
2016-04-29 10:21 ` Peter Ujfalusi
2016-04-29 10:21 ` Peter Ujfalusi
[not found] ` <1461925297-9734-1-git-send-email-peter.ujfalusi-l0cyMroinI0@public.gmane.org>
2016-04-29 10:22 ` Peter Ujfalusi
2016-04-29 10:22 ` Peter Ujfalusi
2016-04-29 10:22 ` Peter Ujfalusi
[not found] ` <6ee9d67a-e907-715a-f3f5-d90a470314c3-l0cyMroinI0@public.gmane.org>
2016-05-04 17:26 ` Tony Lindgren
2016-05-04 17:26 ` Tony Lindgren
2016-05-04 17:26 ` Tony Lindgren
2016-05-04 18:01 ` Nishanth Menon
2016-05-04 18:01 ` Nishanth Menon
2016-05-04 18:01 ` Nishanth Menon
[not found] ` <572A38FD.9050801-l0cyMroinI0@public.gmane.org>
2016-05-05 18:46 ` Tony Lindgren
2016-05-05 18:46 ` Tony Lindgren
2016-05-05 18:46 ` Tony Lindgren
2016-05-09 8:25 ` Peter Ujfalusi
2016-05-09 8:25 ` Peter Ujfalusi
2016-05-09 8:34 ` Tomi Valkeinen
2016-05-09 8:34 ` Tomi Valkeinen
[not found] ` <2822D1C2B9B19F4A8261F756A13373F801BEF7B4@DFLE11.ent.ti.com>
[not found] ` <CAPjucKb+4vd8Ar3MATCuTx+9R36PeB0hbvwDaAD1KTZFCiVJEA@mail.gmail.com>
[not found] ` <2822D1C2B9B19F4A8261F756A13373F801BF86D2@DFLE11.ent.ti.com>
[not found] ` <2822D1C2B9B19F4A8261F756A13373F801BF8703@DFLE11.ent.ti.com>
[not found] ` <CAPjucKb2PLSZcD3YZ9xQk1F62ugFaGAkBBqMp5GmoWFd0H8Vfg@mail.gmail.com>
2016-05-12 16:57 ` Tony Lindgren [this message]
2016-05-12 16:57 ` Tony Lindgren
2016-05-12 19:19 ` Nishanth Menon
2016-05-12 19:19 ` Nishanth Menon
2016-05-12 20:26 ` Tony Lindgren
2016-05-12 20:26 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160512165755.GR5995@atomide.com \
--to=tony@atomide.com \
--cc=af@iseebcn.com \
--cc=devicetree@vger.kernel.org \
--cc=eballetbo@iseebcn.com \
--cc=egavin@iseebcn.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.