Re: [PATCH] ARM: dts: omap5-igep0050: Correct hdmi regulator

[Tony Lindgren <tony@atomide.com>]

* Nishanth Menon <nm@ti.com> [160512 12:21]:
> On 05/12/2016 11:57 AM, Tony Lindgren wrote:
> > + * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33
> > + * VDDA_HDMI - ball AN25. LDO4 is: VPP1 - ball AD9.
> 
> We should set ldo4_reg as 2v as well (default in omap5-board-common is
> 1.8v). VPP1 should be 2v to prevent efuse from being messed up.

Oh OK, here's the patch updated for ldo4.

Tony

8< --------------------
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 12 May 2016 09:51:51 -0700
Subject: [PATCH] ARM: dts: Fix ldo7 source for HDMI on igepv5

Fix ldo7 source for HDMI on igepv5.

Suggested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -35,6 +35,22 @@
 	};
 };
 
+/* LDO4 is VPP1 - ball AD9 */
+&ldo4_reg {
+	regulator-min-microvolt = <2000000>;
+	regulator-max-microvolt = <2000000>;
+};
+
+/*
+ * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33,
+ * VDDA_HDMI - ball AN25
+ */
+&ldo7_reg {
+	status = "okay";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
 &omap5_pmx_core {
 	i2c4_pins: pinmux_i2c4_pins {
 		pinctrl-single,pins = <