All of lore.kernel.org
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: Hauke Mehrtens <hauke@hauke-m.de>
Cc: richard@nod.at, dwmw2@infradead.org, computersforpeace@gmail.com,
	linux-mtd@lists.infradead.org, john@phrozen.org
Subject: Re: [PATCH v3 3/8] MTD: xway: the latched command should be persistent
Date: Sun, 19 Jun 2016 18:22:32 +0200	[thread overview]
Message-ID: <20160619182232.500f75fc@bbrezillon> (raw)
In-Reply-To: <1466352497-6806-4-git-send-email-hauke@hauke-m.de>

On Sun, 19 Jun 2016 18:08:12 +0200
Hauke Mehrtens <hauke@hauke-m.de> wrote:

> From: John Crispin <john@phrozen.org>
> 
> With each write the pins on the NAND flash chip have to be activated.
> Instead of setting them only when NAND_CTRL_CHANGE is given, always set
> them.

This commit message is a bit fuzzy. How about:

"
mtd: nand: xway: Avoid messing up with IO_ADDR_W in ->cmd_ctrl()

The ->cmd_ctrl() function is adjusting the ->IO_ADDR_W value depending
on the command type each time NAND_CTRL_CHANGE is passed. This is not
only useless but can lead to an ->IO_ADDR_W corruption.

Get rid of this logic and rely on the NAND_CLE and NAND_ALE flags to
deduce the iomem address to write the cmd argument to.
"

BTW, please use the "mtd: nand: <nand-controller-driver>: " prefix in
your subject line (this applies to all the patches you sent so far).

> 
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
> ---
>  drivers/mtd/nand/xway_nand.c | 26 +++++++++++---------------
>  1 file changed, 11 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
> index ec189e5..6028edb 100644
> --- a/drivers/mtd/nand/xway_nand.c
> +++ b/drivers/mtd/nand/xway_nand.c
> @@ -107,22 +107,18 @@ static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
>  	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
>  	unsigned long flags;
>  
> -	if (ctrl & NAND_CTRL_CHANGE) {
> -		nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
> -		if (ctrl & NAND_CLE)
> -			nandaddr |= NAND_WRITE_CMD;
> -		else
> -			nandaddr |= NAND_WRITE_ADDR;
> -		this->IO_ADDR_W = (void __iomem *) nandaddr;
> -	}
> +	if (cmd == NAND_CMD_NONE)
> +		return;
>  
> -	if (cmd != NAND_CMD_NONE) {
> -		spin_lock_irqsave(&ebu_lock, flags);
> -		writeb(cmd, this->IO_ADDR_W);
> -		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
> -			;
> -		spin_unlock_irqrestore(&ebu_lock, flags);
> -	}
> +	spin_lock_irqsave(&ebu_lock, flags);
> +	if (ctrl & NAND_CLE)
> +		writeb(cmd, (void __iomem *) (nandaddr | NAND_WRITE_CMD));
> +	else if (ctrl & NAND_ALE)
> +		writeb(cmd, (void __iomem *) (nandaddr | NAND_WRITE_ADDR));
> +
> +	while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
> +		;
> +	spin_unlock_irqrestore(&ebu_lock, flags);
>  }
>  
>  static int xway_dev_ready(struct mtd_info *mtd)

  reply	other threads:[~2016-06-19 16:22 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-19 16:08 [PATCH v3 0/8] MTD: xway: fix driver Hauke Mehrtens
2016-06-19 16:08 ` [PATCH v3 1/8] MTD: xway: add some more documentation Hauke Mehrtens
2016-06-19 16:14   ` Boris Brezillon
2016-06-19 16:32     ` Hauke Mehrtens
2016-06-19 16:08 ` [PATCH v3 2/8] MTD: xway: convert to normal platform driver Hauke Mehrtens
2016-06-19 16:08 ` [PATCH v3 3/8] MTD: xway: the latched command should be persistent Hauke Mehrtens
2016-06-19 16:22   ` Boris Brezillon [this message]
2016-06-19 16:08 ` [PATCH v3 4/8] MTD: xway: use generic reset function Hauke Mehrtens
2016-06-19 16:08 ` [PATCH v3 5/8] MTD: xway: fix nand locking Hauke Mehrtens
2016-06-19 16:26   ` Boris Brezillon
2016-06-19 16:34     ` Hauke Mehrtens
2016-06-19 16:40       ` Boris Brezillon
2016-06-19 16:08 ` [PATCH v3 6/8] MTD: xway: extract read and write function Hauke Mehrtens
2016-06-19 16:08 ` [PATCH v3 7/8] MTD: xway: add nandaddr to own struct Hauke Mehrtens
2016-06-19 16:29   ` Boris Brezillon
2016-06-19 16:32     ` Boris Brezillon
2016-06-19 16:35       ` Hauke Mehrtens
2016-06-19 16:08 ` [PATCH v3 8/8] MTD: xway: add missing write_buf and read_buf to nand driver Hauke Mehrtens
2016-06-19 16:32   ` Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160619182232.500f75fc@bbrezillon \
    --to=boris.brezillon@free-electrons.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=hauke@hauke-m.de \
    --cc=john@phrozen.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.