From: Peter Chen <hzpeterchen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: "Rafael J. Wysocki" <rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org>,
Peter Chen <peter.chen-3arQi8VN3Tc@public.gmane.org>,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
dwmw3-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
mail-APzI5cXaD1zVlRWJc41N0YvC60bnQu0Y@public.gmane.org,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org,
festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
oscar-Bdbr4918Nnnk1uMJSBkQmQ@public.gmane.org,
stephen.boyd-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
stillcompiling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
mka-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org
Subject: Re: [PATCH v6 2/8] power: add power sequence library
Date: Tue, 23 Aug 2016 09:25:25 +0800 [thread overview]
Message-ID: <20160823012525.GA13986@shlinux2> (raw)
In-Reply-To: <20160822102331.bimz22w6z2v65jd7@earth>
On Mon, Aug 22, 2016 at 12:23:31PM +0200, Sebastian Reichel wrote:
> Hi Peter,
>
> On Mon, Aug 22, 2016 at 02:51:58PM +0800, Peter Chen wrote:
> > On Mon, Aug 15, 2016 at 05:13:12PM +0800, Peter Chen wrote:
> > > We have an well-known problem that the device needs to do some power
> > > sequence before it can be recognized by related host, the typical
> > > example like hard-wired mmc devices and usb devices.
> > >
> > > This power sequence is hard to be described at device tree and handled by
> > > related host driver, so we have created a common power sequence
> > > library to cover this requirement. The core code has supplied
> > > some common helpers for host driver, and individual power sequence
> > > libraries handle kinds of power sequence for devices.
> > >
> > > pwrseq_generic is intended for general purpose of power sequence, which
> > > handles gpios and clocks currently, and can cover regulator and pinctrl
> > > in future. The host driver calls pwrseq_alloc_generic to create
> > > an generic pwrseq instance.
> > >
> > > Signed-off-by: Peter Chen <peter.chen-3arQi8VN3Tc@public.gmane.org>
> > > Tested-by Joshua Clayton <stillcompiling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > > Reviewed-by: Matthias Kaehlcke <mka-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
> > > Tested-by: Matthias Kaehlcke <mka-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
> >
> > Hi Greg, Sebastian, Dmitry, and David
> >
> > I find the code under drivers/power have several subsystems.
> > Does this power sequence patch set can go git://git.infradead.org/battery-2.6.git?
> > Or can go the Greg's tree?
>
> I think this does not really fit into the power-supply tree.
> I would expect this to go through Rafael's linux-pm tree.
Ok, thanks. Rafael, would you agree with that? If you agree, I will
update MAINTAINER file.
>
> Note: I moved all the power-supply code into drivers/power/supply/
> in linux-next, among other things because of this patchset. To avoid
> merge conflicts in drivers/power/Makefile and drivers/power/Kconfig
> the tree pulling this patchset should also pull a (yet to be
> created) immutable branch containing
> https://git.kernel.org/cgit/linux/kernel/git/sre/linux-power-supply.git/commit/drivers/power?h=for-next&id=8c0984e5a75337df513047ec92a6c09d78e3e5cd
>
Yes, I found the rebase conflict with it, I will fix it at next
revision.
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: hzpeterchen@gmail.com (Peter Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 2/8] power: add power sequence library
Date: Tue, 23 Aug 2016 09:25:25 +0800 [thread overview]
Message-ID: <20160823012525.GA13986@shlinux2> (raw)
In-Reply-To: <20160822102331.bimz22w6z2v65jd7@earth>
On Mon, Aug 22, 2016 at 12:23:31PM +0200, Sebastian Reichel wrote:
> Hi Peter,
>
> On Mon, Aug 22, 2016 at 02:51:58PM +0800, Peter Chen wrote:
> > On Mon, Aug 15, 2016 at 05:13:12PM +0800, Peter Chen wrote:
> > > We have an well-known problem that the device needs to do some power
> > > sequence before it can be recognized by related host, the typical
> > > example like hard-wired mmc devices and usb devices.
> > >
> > > This power sequence is hard to be described at device tree and handled by
> > > related host driver, so we have created a common power sequence
> > > library to cover this requirement. The core code has supplied
> > > some common helpers for host driver, and individual power sequence
> > > libraries handle kinds of power sequence for devices.
> > >
> > > pwrseq_generic is intended for general purpose of power sequence, which
> > > handles gpios and clocks currently, and can cover regulator and pinctrl
> > > in future. The host driver calls pwrseq_alloc_generic to create
> > > an generic pwrseq instance.
> > >
> > > Signed-off-by: Peter Chen <peter.chen@nxp.com>
> > > Tested-by Joshua Clayton <stillcompiling@gmail.com>
> > > Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> > > Tested-by: Matthias Kaehlcke <mka@chromium.org>
> >
> > Hi Greg, Sebastian, Dmitry, and David
> >
> > I find the code under drivers/power have several subsystems.
> > Does this power sequence patch set can go git://git.infradead.org/battery-2.6.git?
> > Or can go the Greg's tree?
>
> I think this does not really fit into the power-supply tree.
> I would expect this to go through Rafael's linux-pm tree.
Ok, thanks. Rafael, would you agree with that? If you agree, I will
update MAINTAINER file.
>
> Note: I moved all the power-supply code into drivers/power/supply/
> in linux-next, among other things because of this patchset. To avoid
> merge conflicts in drivers/power/Makefile and drivers/power/Kconfig
> the tree pulling this patchset should also pull a (yet to be
> created) immutable branch containing
> https://git.kernel.org/cgit/linux/kernel/git/sre/linux-power-supply.git/commit/drivers/power?h=for-next&id=8c0984e5a75337df513047ec92a6c09d78e3e5cd
>
Yes, I found the rebase conflict with it, I will fix it at next
revision.
--
Best Regards,
Peter Chen
WARNING: multiple messages have this Message-ID (diff)
From: Peter Chen <hzpeterchen@gmail.com>
To: Sebastian Reichel <sre@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
Peter Chen <peter.chen@nxp.com>,
gregkh@linuxfoundation.org, ulf.hansson@linaro.org,
broonie@kernel.org, stern@rowland.harvard.edu,
robh+dt@kernel.org, shawnguo@kernel.org, dbaryshkov@gmail.com,
dwmw3@infradead.org, k.kozlowski@samsung.com,
linux-arm-kernel@lists.infradead.org, p.zabel@pengutronix.de,
devicetree@vger.kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com, linux-usb@vger.kernel.org, arnd@arndb.de,
s.hauer@pengutronix.de, mail@maciej.szmigiero.name,
troy.kisky@boundarydevices.com, festevam@gmail.com,
oscar@naiandei.net, stephen.boyd@linaro.org,
linux-pm@vger.kernel.org, stillcompiling@gmail.com,
linux-kernel@vger.kernel.org, mka@chromium.org
Subject: Re: [PATCH v6 2/8] power: add power sequence library
Date: Tue, 23 Aug 2016 09:25:25 +0800 [thread overview]
Message-ID: <20160823012525.GA13986@shlinux2> (raw)
In-Reply-To: <20160822102331.bimz22w6z2v65jd7@earth>
On Mon, Aug 22, 2016 at 12:23:31PM +0200, Sebastian Reichel wrote:
> Hi Peter,
>
> On Mon, Aug 22, 2016 at 02:51:58PM +0800, Peter Chen wrote:
> > On Mon, Aug 15, 2016 at 05:13:12PM +0800, Peter Chen wrote:
> > > We have an well-known problem that the device needs to do some power
> > > sequence before it can be recognized by related host, the typical
> > > example like hard-wired mmc devices and usb devices.
> > >
> > > This power sequence is hard to be described at device tree and handled by
> > > related host driver, so we have created a common power sequence
> > > library to cover this requirement. The core code has supplied
> > > some common helpers for host driver, and individual power sequence
> > > libraries handle kinds of power sequence for devices.
> > >
> > > pwrseq_generic is intended for general purpose of power sequence, which
> > > handles gpios and clocks currently, and can cover regulator and pinctrl
> > > in future. The host driver calls pwrseq_alloc_generic to create
> > > an generic pwrseq instance.
> > >
> > > Signed-off-by: Peter Chen <peter.chen@nxp.com>
> > > Tested-by Joshua Clayton <stillcompiling@gmail.com>
> > > Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> > > Tested-by: Matthias Kaehlcke <mka@chromium.org>
> >
> > Hi Greg, Sebastian, Dmitry, and David
> >
> > I find the code under drivers/power have several subsystems.
> > Does this power sequence patch set can go git://git.infradead.org/battery-2.6.git?
> > Or can go the Greg's tree?
>
> I think this does not really fit into the power-supply tree.
> I would expect this to go through Rafael's linux-pm tree.
Ok, thanks. Rafael, would you agree with that? If you agree, I will
update MAINTAINER file.
>
> Note: I moved all the power-supply code into drivers/power/supply/
> in linux-next, among other things because of this patchset. To avoid
> merge conflicts in drivers/power/Makefile and drivers/power/Kconfig
> the tree pulling this patchset should also pull a (yet to be
> created) immutable branch containing
> https://git.kernel.org/cgit/linux/kernel/git/sre/linux-power-supply.git/commit/drivers/power?h=for-next&id=8c0984e5a75337df513047ec92a6c09d78e3e5cd
>
Yes, I found the rebase conflict with it, I will fix it at next
revision.
--
Best Regards,
Peter Chen
next prev parent reply other threads:[~2016-08-23 1:25 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-15 9:13 [PATCH v6 0/8] power: add power sequence library Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` [PATCH v6 1/8] binding-doc: power: pwrseq-generic: add binding doc for generic " Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` Peter Chen
[not found] ` <1471252398-957-2-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>
2016-09-01 8:03 ` Vaibhav Hiremath
2016-09-01 8:03 ` Vaibhav Hiremath
2016-09-01 8:03 ` Vaibhav Hiremath
[not found] ` <6832cc55-831a-1188-4878-bbbf0b3c3be8-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-02 1:00 ` Peter Chen
2016-09-02 1:00 ` Peter Chen
2016-09-02 1:00 ` Peter Chen
2016-09-06 6:04 ` Vaibhav Hiremath
2016-09-06 6:04 ` Vaibhav Hiremath
2016-09-06 6:04 ` Vaibhav Hiremath
2016-08-15 9:13 ` [PATCH v6 2/8] power: add " Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-22 6:51 ` Peter Chen
2016-08-22 6:51 ` Peter Chen
2016-08-22 6:51 ` Peter Chen
2016-08-22 10:23 ` Sebastian Reichel
2016-08-22 10:23 ` Sebastian Reichel
2016-08-23 1:25 ` Peter Chen [this message]
2016-08-23 1:25 ` Peter Chen
2016-08-23 1:25 ` Peter Chen
2016-09-01 8:02 ` Vaibhav Hiremath
2016-09-01 8:02 ` Vaibhav Hiremath
2016-09-02 1:29 ` Peter Chen
2016-09-02 1:29 ` Peter Chen
[not found] ` <1471252398-957-1-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>
2016-08-15 9:13 ` [PATCH v6 3/8] binding-doc: usb: usb-device: add optional properties for power sequence Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` [PATCH v6 7/8] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` [PATCH v6 8/8] ARM: dts: imx6q-evi: Fix onboard hub reset line Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` [PATCH v6 4/8] usb: core: add power sequence handling for USB devices Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-22 6:53 ` Peter Chen
2016-08-22 6:53 ` Peter Chen
2016-08-22 16:09 ` Alan Stern
2016-08-22 16:09 ` Alan Stern
2016-08-22 16:09 ` Alan Stern
2016-08-23 3:10 ` Peter Chen
2016-08-23 3:10 ` Peter Chen
2016-08-23 15:37 ` Alan Stern
2016-08-23 15:37 ` Alan Stern
2016-08-23 15:37 ` Alan Stern
2016-09-01 8:02 ` Vaibhav Hiremath
2016-09-01 8:02 ` Vaibhav Hiremath
2016-09-02 1:30 ` Peter Chen
2016-09-02 1:30 ` Peter Chen
2016-08-15 9:13 ` [PATCH v6 5/8] usb: chipidea: let chipidea core device of_node equal's glue layer device of_node Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` [PATCH v6 6/8] ARM: dts: imx6qdl: Enable usb node children with <reg> Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-15 9:13 ` Peter Chen
2016-08-23 10:32 ` [PATCH v6 0/8] power: add power sequence library Vaibhav Hiremath
2016-08-23 10:32 ` Vaibhav Hiremath
2016-08-23 10:32 ` Vaibhav Hiremath
[not found] ` <b1848eb2-9298-9089-ee4d-5356998c6c08-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-08-24 8:53 ` Peter Chen
2016-08-24 8:53 ` Peter Chen
2016-08-24 8:53 ` Peter Chen
2016-08-29 11:10 ` Peter Chen
2016-08-29 11:10 ` Peter Chen
2016-08-31 8:16 ` Vaibhav Hiremath
2016-08-31 8:16 ` Vaibhav Hiremath
[not found] ` <3a45793f-18d9-0688-d2ab-ef79432c473c-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-08-31 9:52 ` Peter Chen
2016-08-31 9:52 ` Peter Chen
2016-08-31 9:52 ` Peter Chen
2016-08-31 16:58 ` Vaibhav Hiremath
2016-08-31 16:58 ` Vaibhav Hiremath
2016-08-31 16:58 ` Vaibhav Hiremath
2016-09-02 1:10 ` Peter Chen
2016-09-02 1:10 ` Peter Chen
2016-09-06 10:18 ` Vaibhav Hiremath
2016-09-06 10:18 ` Vaibhav Hiremath
2016-09-06 10:18 ` Vaibhav Hiremath
2016-09-09 8:47 ` Ulf Hansson
2016-09-09 8:47 ` Ulf Hansson
2016-09-09 8:47 ` Ulf Hansson
2016-09-19 7:39 ` Vaibhav Hiremath
2016-09-19 7:39 ` Vaibhav Hiremath
2016-09-19 7:39 ` Vaibhav Hiremath
[not found] ` <ecbc3c0d-4ce7-758d-7f7d-4b3f3003c1ac-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-09-19 7:46 ` Peter Chen
2016-09-19 7:46 ` Peter Chen
2016-09-19 7:46 ` Peter Chen
2016-09-19 8:17 ` Vaibhav Hiremath
2016-09-19 8:17 ` Vaibhav Hiremath
2016-09-19 8:17 ` Vaibhav Hiremath
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160823012525.GA13986@shlinux2 \
--to=hzpeterchen-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dwmw3-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mail-APzI5cXaD1zVlRWJc41N0YvC60bnQu0Y@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mka-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=oscar-Bdbr4918Nnnk1uMJSBkQmQ@public.gmane.org \
--cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=peter.chen-3arQi8VN3Tc@public.gmane.org \
--cc=rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=stephen.boyd-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org \
--cc=stillcompiling-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org \
--cc=ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.