From: "Andrew F. Davis" <afd-l0cyMroinI0@public.gmane.org>
To: "Benoît Cousson"
<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
"Tony Lindgren" <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Andrew F . Davis" <afd-l0cyMroinI0@public.gmane.org>
Subject: [PATCH 2/7] ARM: dts: am335x-icev2: Disable Industrial I/O LEDs and fix naming
Date: Fri, 7 Oct 2016 09:44:23 -0500 [thread overview]
Message-ID: <20161007144428.16671-2-afd@ti.com> (raw)
In-Reply-To: <20161007144428.16671-1-afd-l0cyMroinI0@public.gmane.org>
The LEDs tied to the Industrial I/O output pins are meant for providing
status feed-back and are not the primary use for the pins. Disable
this use by default. Also unify the LED naming across IDK platforms.
Signed-off-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>
Signed-off-by: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>
---
arch/arm/boot/dts/am335x-icev2.dts | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index d46efc6..fa3f5dc 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -43,52 +43,52 @@
enable-active-high;
};
- leds0 {
+ leds-iio {
+ status = "disabled";
compatible = "gpio-leds";
-
- led0 {
+ led-out0 {
label = "out0";
gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led1 {
+ led-out1 {
label = "out1";
gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led2 {
+ led-out2 {
label = "out2";
gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led3 {
+ led-out3 {
label = "out3";
gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led4 {
+ led-out4 {
label = "out4";
gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led5 {
+ led-out5 {
label = "out5";
gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led6 {
+ led-out6 {
label = "out6";
gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led7 {
+ led-out7 {
label = "out7";
gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
default-state = "off";
--
2.10.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: "Andrew F. Davis" <afd@ti.com>
To: "Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>
Cc: <linux-omap@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, "Andrew F . Davis" <afd@ti.com>
Subject: [PATCH 2/7] ARM: dts: am335x-icev2: Disable Industrial I/O LEDs and fix naming
Date: Fri, 7 Oct 2016 09:44:23 -0500 [thread overview]
Message-ID: <20161007144428.16671-2-afd@ti.com> (raw)
In-Reply-To: <20161007144428.16671-1-afd@ti.com>
The LEDs tied to the Industrial I/O output pins are meant for providing
status feed-back and are not the primary use for the pins. Disable
this use by default. Also unify the LED naming across IDK platforms.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
arch/arm/boot/dts/am335x-icev2.dts | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index d46efc6..fa3f5dc 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -43,52 +43,52 @@
enable-active-high;
};
- leds0 {
+ leds-iio {
+ status = "disabled";
compatible = "gpio-leds";
-
- led0 {
+ led-out0 {
label = "out0";
gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led1 {
+ led-out1 {
label = "out1";
gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led2 {
+ led-out2 {
label = "out2";
gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led3 {
+ led-out3 {
label = "out3";
gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led4 {
+ led-out4 {
label = "out4";
gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led5 {
+ led-out5 {
label = "out5";
gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led6 {
+ led-out6 {
label = "out6";
gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led7 {
+ led-out7 {
label = "out7";
gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
default-state = "off";
--
2.10.0
next prev parent reply other threads:[~2016-10-07 14:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-07 14:44 [PATCH 1/7] ARM: dts: am335x-icev2: Add Industrial input support Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis
[not found] ` <20161007144428.16671-1-afd-l0cyMroinI0@public.gmane.org>
2016-10-07 14:44 ` Andrew F. Davis [this message]
2016-10-07 14:44 ` [PATCH 2/7] ARM: dts: am335x-icev2: Disable Industrial I/O LEDs and fix naming Andrew F. Davis
2016-10-07 14:44 ` [PATCH 5/7] ARM: dts: am437x-idk: Add Industrial output support Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis
2016-10-07 14:44 ` [PATCH 6/7] ARM: dts: am57xx-idk: Add Industrial input support Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis
2016-10-07 14:44 ` [PATCH 7/7] ARM: dts: am57xx-idk: Add Industrial output support Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis
2016-10-07 14:44 ` [PATCH 3/7] ARM: dts: am335x-icev2: Add ADC support Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis
2016-10-07 14:44 ` [PATCH 4/7] ARM: dts: am437x-idk: Add Industrial input support Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis
2016-11-18 15:00 ` [PATCH 1/7] ARM: dts: am335x-icev2: " Andrew F. Davis
2016-11-18 15:00 ` Andrew F. Davis
[not found] ` <7095f8b0-efdb-6187-7580-43e8a0fa2cf3-l0cyMroinI0@public.gmane.org>
2016-11-18 15:08 ` Tony Lindgren
2016-11-18 15:08 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161007144428.16671-2-afd@ti.com \
--to=afd-l0cymroini0@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.