From: "Andrew F. Davis" <afd-l0cyMroinI0@public.gmane.org>
To: "Benoît Cousson"
<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
"Tony Lindgren" <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Andrew F . Davis" <afd-l0cyMroinI0@public.gmane.org>
Subject: [PATCH 6/7] ARM: dts: am57xx-idk: Add Industrial input support
Date: Fri, 7 Oct 2016 09:44:27 -0500 [thread overview]
Message-ID: <20161007144428.16671-6-afd@ti.com> (raw)
In-Reply-To: <20161007144428.16671-1-afd-l0cyMroinI0@public.gmane.org>
The SN65HVS882 is available on both the AM572x and AM571x IDKs and is
attached to SPI1. Input is attached to the I/O header. The load trigger
is attached to GPIO3_19 on the AM572x IDK.
Signed-off-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>
Signed-off-by: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>
---
arch/arm/boot/dts/am572x-idk.dts | 4 ++++
arch/arm/boot/dts/am57xx-idk-common.dtsi | 15 +++++++++++++++
2 files changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 87bbc66..27d9149 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -83,3 +83,7 @@
bus-width = <4>;
cd-gpios = <&gpio6 27 0>; /* gpio 219 */
};
+
+&sn65hvs882 {
+ load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 03cec62..438076e 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -253,6 +253,21 @@
};
};
+&mcspi3 {
+ status = "okay";
+ ti,pindir-d0-out-d1-in;
+
+ sn65hvs882: sn65hvs882@0 {
+ compatible = "pisosr-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ };
+};
+
&uart3 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
--
2.10.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: "Andrew F. Davis" <afd@ti.com>
To: "Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>
Cc: <linux-omap@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, "Andrew F . Davis" <afd@ti.com>
Subject: [PATCH 6/7] ARM: dts: am57xx-idk: Add Industrial input support
Date: Fri, 7 Oct 2016 09:44:27 -0500 [thread overview]
Message-ID: <20161007144428.16671-6-afd@ti.com> (raw)
In-Reply-To: <20161007144428.16671-1-afd@ti.com>
The SN65HVS882 is available on both the AM572x and AM571x IDKs and is
attached to SPI1. Input is attached to the I/O header. The load trigger
is attached to GPIO3_19 on the AM572x IDK.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
arch/arm/boot/dts/am572x-idk.dts | 4 ++++
arch/arm/boot/dts/am57xx-idk-common.dtsi | 15 +++++++++++++++
2 files changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 87bbc66..27d9149 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -83,3 +83,7 @@
bus-width = <4>;
cd-gpios = <&gpio6 27 0>; /* gpio 219 */
};
+
+&sn65hvs882 {
+ load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 03cec62..438076e 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -253,6 +253,21 @@
};
};
+&mcspi3 {
+ status = "okay";
+ ti,pindir-d0-out-d1-in;
+
+ sn65hvs882: sn65hvs882@0 {
+ compatible = "pisosr-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ };
+};
+
&uart3 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
--
2.10.0
next prev parent reply other threads:[~2016-10-07 14:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-07 14:44 [PATCH 1/7] ARM: dts: am335x-icev2: Add Industrial input support Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis
2016-10-07 14:44 ` [PATCH 3/7] ARM: dts: am335x-icev2: Add ADC support Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis
2016-10-07 14:44 ` [PATCH 4/7] ARM: dts: am437x-idk: Add Industrial input support Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis
[not found] ` <20161007144428.16671-1-afd-l0cyMroinI0@public.gmane.org>
2016-10-07 14:44 ` [PATCH 2/7] ARM: dts: am335x-icev2: Disable Industrial I/O LEDs and fix naming Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis
2016-10-07 14:44 ` [PATCH 5/7] ARM: dts: am437x-idk: Add Industrial output support Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis [this message]
2016-10-07 14:44 ` [PATCH 6/7] ARM: dts: am57xx-idk: Add Industrial input support Andrew F. Davis
2016-10-07 14:44 ` [PATCH 7/7] ARM: dts: am57xx-idk: Add Industrial output support Andrew F. Davis
2016-10-07 14:44 ` Andrew F. Davis
2016-11-18 15:00 ` [PATCH 1/7] ARM: dts: am335x-icev2: Add Industrial input support Andrew F. Davis
2016-11-18 15:00 ` Andrew F. Davis
[not found] ` <7095f8b0-efdb-6187-7580-43e8a0fa2cf3-l0cyMroinI0@public.gmane.org>
2016-11-18 15:08 ` Tony Lindgren
2016-11-18 15:08 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161007144428.16671-6-afd@ti.com \
--to=afd-l0cymroini0@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.