From: ahaslam@baylibre.com (Axel Haslam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] ARM: dts: da850: add usb device node
Date: Tue, 8 Nov 2016 19:58:31 +0100 [thread overview]
Message-ID: <20161108185831.17683-4-ahaslam@baylibre.com> (raw)
In-Reply-To: <20161108185831.17683-1-ahaslam@baylibre.com>
This adds the ohci device node for the da850 soc.
It also enables it for the omapl138 hawk board.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
arch/arm/boot/dts/da850-lcdk.dts | 8 ++++++++
arch/arm/boot/dts/da850.dtsi | 8 ++++++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 7b8ab21..aaf533e 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -86,6 +86,14 @@
};
};
+&usb_phy {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
&serial2 {
pinctrl-names = "default";
pinctrl-0 = <&serial2_rxtx_pins>;
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 2534aab..c74f1a6 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -405,6 +405,14 @@
>;
status = "disabled";
};
+ ohci: usb at 225000 {
+ compatible = "ti,da830-ohci";
+ reg = <0x225000 0x1000>;
+ interrupts = <59>;
+ phys = <&usb_phy 1>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ };
gpio: gpio at 226000 {
compatible = "ti,dm6441-gpio";
gpio-controller;
--
2.10.1
WARNING: multiple messages have this Message-ID (diff)
From: Axel Haslam <ahaslam@baylibre.com>
To: gregkh@linuxfoundation.org, stern@rowland.harvard.edu,
nsekhar@ti.com, khilman@kernel.org, david@lechnology.com,
robh+dt@kernel.org
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Axel Haslam <ahaslam@baylibre.com>
Subject: [PATCH 3/3] ARM: dts: da850: add usb device node
Date: Tue, 8 Nov 2016 19:58:31 +0100 [thread overview]
Message-ID: <20161108185831.17683-4-ahaslam@baylibre.com> (raw)
In-Reply-To: <20161108185831.17683-1-ahaslam@baylibre.com>
This adds the ohci device node for the da850 soc.
It also enables it for the omapl138 hawk board.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
arch/arm/boot/dts/da850-lcdk.dts | 8 ++++++++
arch/arm/boot/dts/da850.dtsi | 8 ++++++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 7b8ab21..aaf533e 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -86,6 +86,14 @@
};
};
+&usb_phy {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
&serial2 {
pinctrl-names = "default";
pinctrl-0 = <&serial2_rxtx_pins>;
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 2534aab..c74f1a6 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -405,6 +405,14 @@
>;
status = "disabled";
};
+ ohci: usb@225000 {
+ compatible = "ti,da830-ohci";
+ reg = <0x225000 0x1000>;
+ interrupts = <59>;
+ phys = <&usb_phy 1>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ };
gpio: gpio@226000 {
compatible = "ti,dm6441-gpio";
gpio-controller;
--
2.10.1
next prev parent reply other threads:[~2016-11-08 18:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-08 18:58 [PATCH 0/3] [PART 4/4] USB: ohci-da8xx: Add DT support Axel Haslam
2016-11-08 18:58 ` Axel Haslam
2016-11-08 18:58 ` [PATCH 1/3] USB: ohci: da8xx: Add devicetree bindings Axel Haslam
2016-11-08 18:58 ` Axel Haslam
2016-11-08 18:58 ` Axel Haslam
2016-11-08 18:58 ` [PATCH 2/3] USB: ohci: da8xx: Allow probing from DT Axel Haslam
2016-11-08 18:58 ` Axel Haslam
2016-11-08 18:58 ` Axel Haslam
2016-11-08 18:58 ` Axel Haslam [this message]
2016-11-08 18:58 ` [PATCH 3/3] ARM: dts: da850: add usb device node Axel Haslam
2016-11-08 20:34 ` kbuild test robot
2016-11-08 20:34 ` kbuild test robot
2016-11-08 20:34 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161108185831.17683-4-ahaslam@baylibre.com \
--to=ahaslam@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.