* [PATCH 0/3] [PART 4/4] USB: ohci-da8xx: Add DT support @ 2016-11-08 18:58 ` Axel Haslam 0 siblings, 0 replies; 13+ messages in thread From: Axel Haslam @ 2016-11-08 18:58 UTC (permalink / raw) To: linux-arm-kernel This series defines the bindings and adds device tree support for the davinci OHCI driver. DEPENDENCIES: 1. [PATCH 0/3] fix ohci phy name https://lkml.org/lkml/2016/11/2/208 2. [PATCH/RFC v2 0/3] regulator: handling of error conditions for usb drivers https://lkml.org/lkml/2016/11/3/188 3. [PATCH v4 0/3] [PART 1/4] USB: ohci-da8xx: Allow a regulator for VBUS and over current 4. [PATCH 0/3] [PART 2/4] ARM: davinci: OHCI: Use a regulator instead of callbacks 5. [PATCH 0/2] [PART 3/4] USB: ohci-da8xx: Remove platform callbacks A branch with all the dependencies can be found here: https://github.com/axelhaslamx/linux-axel/commits/ohci-da8xx-dt-v4 Axel Haslam (3): USB: ohci: da8xx: Add devicetree bindings USB: ohci: da8xx: Allow probing from DT ARM: dts: da850: add usb device node .../devicetree/bindings/usb/ohci-da8xx.txt | 39 ++++++++++++++++++++++ arch/arm/boot/dts/da850-lcdk.dts | 8 +++++ arch/arm/boot/dts/da850.dtsi | 8 +++++ drivers/usb/host/ohci-da8xx.c | 8 +++++ 4 files changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt -- 2.10.1 ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 0/3] [PART 4/4] USB: ohci-da8xx: Add DT support @ 2016-11-08 18:58 ` Axel Haslam 0 siblings, 0 replies; 13+ messages in thread From: Axel Haslam @ 2016-11-08 18:58 UTC (permalink / raw) To: gregkh, stern, nsekhar, khilman, david, robh+dt Cc: linux-usb, linux-kernel, linux-arm-kernel, devicetree, Axel Haslam This series defines the bindings and adds device tree support for the davinci OHCI driver. DEPENDENCIES: 1. [PATCH 0/3] fix ohci phy name https://lkml.org/lkml/2016/11/2/208 2. [PATCH/RFC v2 0/3] regulator: handling of error conditions for usb drivers https://lkml.org/lkml/2016/11/3/188 3. [PATCH v4 0/3] [PART 1/4] USB: ohci-da8xx: Allow a regulator for VBUS and over current 4. [PATCH 0/3] [PART 2/4] ARM: davinci: OHCI: Use a regulator instead of callbacks 5. [PATCH 0/2] [PART 3/4] USB: ohci-da8xx: Remove platform callbacks A branch with all the dependencies can be found here: https://github.com/axelhaslamx/linux-axel/commits/ohci-da8xx-dt-v4 Axel Haslam (3): USB: ohci: da8xx: Add devicetree bindings USB: ohci: da8xx: Allow probing from DT ARM: dts: da850: add usb device node .../devicetree/bindings/usb/ohci-da8xx.txt | 39 ++++++++++++++++++++++ arch/arm/boot/dts/da850-lcdk.dts | 8 +++++ arch/arm/boot/dts/da850.dtsi | 8 +++++ drivers/usb/host/ohci-da8xx.c | 8 +++++ 4 files changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt -- 2.10.1 ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/3] USB: ohci: da8xx: Add devicetree bindings @ 2016-11-08 18:58 ` Axel Haslam 0 siblings, 0 replies; 13+ messages in thread From: Axel Haslam @ 2016-11-08 18:58 UTC (permalink / raw) To: linux-arm-kernel This patch documents the device tree bindings required for the ohci controller found in TI da8xx family of SoC's Cc: devicetree at vger.kernel.org Signed-off-by: Axel Haslam <ahaslam@baylibre.com> --- .../devicetree/bindings/usb/ohci-da8xx.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt new file mode 100644 index 0000000..66672e6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt @@ -0,0 +1,39 @@ +DA8XX USB OHCI controller + +Required properties: + + - compatible: Should be "ti,da830-ohci" + - reg: Should contain one register range i.e. start and length + - interrupts: Description of the interrupt line + - phys: Phandle for the PHY device + - phy-names: Should be "usb-phy" + +Optional properties: + - vbus-supply: Regulator that controls vbus power + +Example: + +reg_usb_ohci: regulator at 0 { + compatible = "regulator-fixed"; + gpio = <&gpio 109 0>; + over-current-gpios = <&gpio 36 0>; + regulator-boot-on; + enable-active-high; + regulator-name = "usb_ohci_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +usb_phy: usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <1>; +}; + +ohci: usb at 0225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + vbus-supply = <®_usb_ohci>; +}; -- 2.10.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 1/3] USB: ohci: da8xx: Add devicetree bindings @ 2016-11-08 18:58 ` Axel Haslam 0 siblings, 0 replies; 13+ messages in thread From: Axel Haslam @ 2016-11-08 18:58 UTC (permalink / raw) To: gregkh, stern, nsekhar, khilman, david, robh+dt Cc: linux-usb, linux-kernel, linux-arm-kernel, devicetree, Axel Haslam This patch documents the device tree bindings required for the ohci controller found in TI da8xx family of SoC's Cc: devicetree@vger.kernel.org Signed-off-by: Axel Haslam <ahaslam@baylibre.com> --- .../devicetree/bindings/usb/ohci-da8xx.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt new file mode 100644 index 0000000..66672e6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt @@ -0,0 +1,39 @@ +DA8XX USB OHCI controller + +Required properties: + + - compatible: Should be "ti,da830-ohci" + - reg: Should contain one register range i.e. start and length + - interrupts: Description of the interrupt line + - phys: Phandle for the PHY device + - phy-names: Should be "usb-phy" + +Optional properties: + - vbus-supply: Regulator that controls vbus power + +Example: + +reg_usb_ohci: regulator@0 { + compatible = "regulator-fixed"; + gpio = <&gpio 109 0>; + over-current-gpios = <&gpio 36 0>; + regulator-boot-on; + enable-active-high; + regulator-name = "usb_ohci_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +usb_phy: usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <1>; +}; + +ohci: usb@0225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + vbus-supply = <®_usb_ohci>; +}; -- 2.10.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 1/3] USB: ohci: da8xx: Add devicetree bindings @ 2016-11-08 18:58 ` Axel Haslam 0 siblings, 0 replies; 13+ messages in thread From: Axel Haslam @ 2016-11-08 18:58 UTC (permalink / raw) To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, nsekhar-l0cyMroinI0, khilman-DgEjT+Ai2ygdnm+yROfE0A, david-nq/r/kbU++upp/zk7JDF2g, robh+dt-DgEjT+Ai2ygdnm+yROfE0A Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Axel Haslam This patch documents the device tree bindings required for the ohci controller found in TI da8xx family of SoC's Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Signed-off-by: Axel Haslam <ahaslam-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> --- .../devicetree/bindings/usb/ohci-da8xx.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt new file mode 100644 index 0000000..66672e6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt @@ -0,0 +1,39 @@ +DA8XX USB OHCI controller + +Required properties: + + - compatible: Should be "ti,da830-ohci" + - reg: Should contain one register range i.e. start and length + - interrupts: Description of the interrupt line + - phys: Phandle for the PHY device + - phy-names: Should be "usb-phy" + +Optional properties: + - vbus-supply: Regulator that controls vbus power + +Example: + +reg_usb_ohci: regulator@0 { + compatible = "regulator-fixed"; + gpio = <&gpio 109 0>; + over-current-gpios = <&gpio 36 0>; + regulator-boot-on; + enable-active-high; + regulator-name = "usb_ohci_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +usb_phy: usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <1>; +}; + +ohci: usb@0225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + vbus-supply = <®_usb_ohci>; +}; -- 2.10.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 2/3] USB: ohci: da8xx: Allow probing from DT @ 2016-11-08 18:58 ` Axel Haslam 0 siblings, 0 replies; 13+ messages in thread From: Axel Haslam @ 2016-11-08 18:58 UTC (permalink / raw) To: linux-arm-kernel This adds the compatible string to the ohci driver to be able to probe from DT Signed-off-by: Axel Haslam <ahaslam@baylibre.com> --- drivers/usb/host/ohci-da8xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 83b182e..bbfe342 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -321,6 +321,13 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } /*-------------------------------------------------------------------------*/ +#ifdef CONFIG_OF +static const struct of_device_id da8xx_ohci_ids[] = { + { .compatible = "ti,da830-ohci" }, + { } +}; +MODULE_DEVICE_TABLE(of, da8xx_ohci_ids); +#endif static int ohci_da8xx_probe(struct platform_device *pdev) { @@ -472,6 +479,7 @@ static struct platform_driver ohci_hcd_da8xx_driver = { #endif .driver = { .name = DRV_NAME, + .of_match_table = of_match_ptr(da8xx_ohci_ids), }, }; -- 2.10.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 2/3] USB: ohci: da8xx: Allow probing from DT @ 2016-11-08 18:58 ` Axel Haslam 0 siblings, 0 replies; 13+ messages in thread From: Axel Haslam @ 2016-11-08 18:58 UTC (permalink / raw) To: gregkh, stern, nsekhar, khilman, david, robh+dt Cc: linux-usb, linux-kernel, linux-arm-kernel, devicetree, Axel Haslam This adds the compatible string to the ohci driver to be able to probe from DT Signed-off-by: Axel Haslam <ahaslam@baylibre.com> --- drivers/usb/host/ohci-da8xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 83b182e..bbfe342 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -321,6 +321,13 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } /*-------------------------------------------------------------------------*/ +#ifdef CONFIG_OF +static const struct of_device_id da8xx_ohci_ids[] = { + { .compatible = "ti,da830-ohci" }, + { } +}; +MODULE_DEVICE_TABLE(of, da8xx_ohci_ids); +#endif static int ohci_da8xx_probe(struct platform_device *pdev) { @@ -472,6 +479,7 @@ static struct platform_driver ohci_hcd_da8xx_driver = { #endif .driver = { .name = DRV_NAME, + .of_match_table = of_match_ptr(da8xx_ohci_ids), }, }; -- 2.10.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 2/3] USB: ohci: da8xx: Allow probing from DT @ 2016-11-08 18:58 ` Axel Haslam 0 siblings, 0 replies; 13+ messages in thread From: Axel Haslam @ 2016-11-08 18:58 UTC (permalink / raw) To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, nsekhar-l0cyMroinI0, khilman-DgEjT+Ai2ygdnm+yROfE0A, david-nq/r/kbU++upp/zk7JDF2g, robh+dt-DgEjT+Ai2ygdnm+yROfE0A Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Axel Haslam This adds the compatible string to the ohci driver to be able to probe from DT Signed-off-by: Axel Haslam <ahaslam-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> --- drivers/usb/host/ohci-da8xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 83b182e..bbfe342 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -321,6 +321,13 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } /*-------------------------------------------------------------------------*/ +#ifdef CONFIG_OF +static const struct of_device_id da8xx_ohci_ids[] = { + { .compatible = "ti,da830-ohci" }, + { } +}; +MODULE_DEVICE_TABLE(of, da8xx_ohci_ids); +#endif static int ohci_da8xx_probe(struct platform_device *pdev) { @@ -472,6 +479,7 @@ static struct platform_driver ohci_hcd_da8xx_driver = { #endif .driver = { .name = DRV_NAME, + .of_match_table = of_match_ptr(da8xx_ohci_ids), }, }; -- 2.10.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 3/3] ARM: dts: da850: add usb device node 2016-11-08 18:58 ` Axel Haslam @ 2016-11-08 18:58 ` Axel Haslam -1 siblings, 0 replies; 13+ messages in thread From: Axel Haslam @ 2016-11-08 18:58 UTC (permalink / raw) To: linux-arm-kernel This adds the ohci device node for the da850 soc. It also enables it for the omapl138 hawk board. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> --- arch/arm/boot/dts/da850-lcdk.dts | 8 ++++++++ arch/arm/boot/dts/da850.dtsi | 8 ++++++++ 2 files changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 7b8ab21..aaf533e 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -86,6 +86,14 @@ }; }; +&usb_phy { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + &serial2 { pinctrl-names = "default"; pinctrl-0 = <&serial2_rxtx_pins>; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 2534aab..c74f1a6 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -405,6 +405,14 @@ >; status = "disabled"; }; + ohci: usb at 225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + status = "disabled"; + }; gpio: gpio at 226000 { compatible = "ti,dm6441-gpio"; gpio-controller; -- 2.10.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 3/3] ARM: dts: da850: add usb device node @ 2016-11-08 18:58 ` Axel Haslam 0 siblings, 0 replies; 13+ messages in thread From: Axel Haslam @ 2016-11-08 18:58 UTC (permalink / raw) To: gregkh, stern, nsekhar, khilman, david, robh+dt Cc: linux-usb, linux-kernel, linux-arm-kernel, devicetree, Axel Haslam This adds the ohci device node for the da850 soc. It also enables it for the omapl138 hawk board. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> --- arch/arm/boot/dts/da850-lcdk.dts | 8 ++++++++ arch/arm/boot/dts/da850.dtsi | 8 ++++++++ 2 files changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 7b8ab21..aaf533e 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -86,6 +86,14 @@ }; }; +&usb_phy { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + &serial2 { pinctrl-names = "default"; pinctrl-0 = <&serial2_rxtx_pins>; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 2534aab..c74f1a6 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -405,6 +405,14 @@ >; status = "disabled"; }; + ohci: usb@225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + status = "disabled"; + }; gpio: gpio@226000 { compatible = "ti,dm6441-gpio"; gpio-controller; -- 2.10.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH 3/3] ARM: dts: da850: add usb device node @ 2016-11-08 20:34 ` kbuild test robot 0 siblings, 0 replies; 13+ messages in thread From: kbuild test robot @ 2016-11-08 20:34 UTC (permalink / raw) To: linux-arm-kernel Hi Axel, [auto build test ERROR on usb/usb-testing] [also build test ERROR on next-20161108] [cannot apply to robh/for-next v4.9-rc4] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/Axel-Haslam/USB-ohci-da8xx-Add-devicetree-bindings/20161109-031338 base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing config: arm-at91_dt_defconfig (attached as .config) compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705 reproduce: wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree make.cross ARCH=arm All errors (new ones prefixed by >>): >> Error: arch/arm/boot/dts/da850-lcdk.dts:89.1-9 Label or path usb_phy not found FATAL ERROR: Syntax error parsing input tree --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation -------------- next part -------------- A non-text attachment was scrubbed... Name: .config.gz Type: application/gzip Size: 21781 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161109/5e5ea637/attachment-0001.gz> ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 3/3] ARM: dts: da850: add usb device node @ 2016-11-08 20:34 ` kbuild test robot 0 siblings, 0 replies; 13+ messages in thread From: kbuild test robot @ 2016-11-08 20:34 UTC (permalink / raw) To: Axel Haslam Cc: kbuild-all, gregkh, stern, nsekhar, khilman, david, robh+dt, linux-usb, linux-kernel, linux-arm-kernel, devicetree, Axel Haslam [-- Attachment #1: Type: text/plain, Size: 1129 bytes --] Hi Axel, [auto build test ERROR on usb/usb-testing] [also build test ERROR on next-20161108] [cannot apply to robh/for-next v4.9-rc4] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/Axel-Haslam/USB-ohci-da8xx-Add-devicetree-bindings/20161109-031338 base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing config: arm-at91_dt_defconfig (attached as .config) compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705 reproduce: wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree make.cross ARCH=arm All errors (new ones prefixed by >>): >> Error: arch/arm/boot/dts/da850-lcdk.dts:89.1-9 Label or path usb_phy not found FATAL ERROR: Syntax error parsing input tree --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation [-- Attachment #2: .config.gz --] [-- Type: application/gzip, Size: 21781 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 3/3] ARM: dts: da850: add usb device node @ 2016-11-08 20:34 ` kbuild test robot 0 siblings, 0 replies; 13+ messages in thread From: kbuild test robot @ 2016-11-08 20:34 UTC (permalink / raw) Cc: kbuild-all-JC7UmRfGjtg, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, nsekhar-l0cyMroinI0, khilman-DgEjT+Ai2ygdnm+yROfE0A, david-nq/r/kbU++upp/zk7JDF2g, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, Axel Haslam [-- Attachment #1: Type: text/plain, Size: 1129 bytes --] Hi Axel, [auto build test ERROR on usb/usb-testing] [also build test ERROR on next-20161108] [cannot apply to robh/for-next v4.9-rc4] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/Axel-Haslam/USB-ohci-da8xx-Add-devicetree-bindings/20161109-031338 base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing config: arm-at91_dt_defconfig (attached as .config) compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705 reproduce: wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree make.cross ARCH=arm All errors (new ones prefixed by >>): >> Error: arch/arm/boot/dts/da850-lcdk.dts:89.1-9 Label or path usb_phy not found FATAL ERROR: Syntax error parsing input tree --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation [-- Attachment #2: .config.gz --] [-- Type: application/gzip, Size: 21781 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2016-11-08 20:34 UTC | newest] Thread overview: 13+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-11-08 18:58 [PATCH 0/3] [PART 4/4] USB: ohci-da8xx: Add DT support Axel Haslam 2016-11-08 18:58 ` Axel Haslam 2016-11-08 18:58 ` [PATCH 1/3] USB: ohci: da8xx: Add devicetree bindings Axel Haslam 2016-11-08 18:58 ` Axel Haslam 2016-11-08 18:58 ` Axel Haslam 2016-11-08 18:58 ` [PATCH 2/3] USB: ohci: da8xx: Allow probing from DT Axel Haslam 2016-11-08 18:58 ` Axel Haslam 2016-11-08 18:58 ` Axel Haslam 2016-11-08 18:58 ` [PATCH 3/3] ARM: dts: da850: add usb device node Axel Haslam 2016-11-08 18:58 ` Axel Haslam 2016-11-08 20:34 ` kbuild test robot 2016-11-08 20:34 ` kbuild test robot 2016-11-08 20:34 ` kbuild test robot
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.