From: linux@armlinux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [BUG] hdlcd gets confused about base address
Date: Mon, 21 Nov 2016 14:30:53 +0000 [thread overview]
Message-ID: <20161121143053.GH1041@n2100.armlinux.org.uk> (raw)
In-Reply-To: <20161121132419.GF1041@n2100.armlinux.org.uk>
On Mon, Nov 21, 2016 at 01:24:19PM +0000, Russell King - ARM Linux wrote:
> On Mon, Nov 21, 2016 at 12:56:53PM +0000, Liviu Dudau wrote:
> > That is mostly due to the check in hdlcd_crtc_disable() which I should
> > remove, I've added it because I was getting a ->disable() hook call
> > before any ->enable() was called at startup time. I need to revisit
> > this as I remember Daniel was commenting that this was not needed.
>
> Removing that test results in:
>
> [drm:drm_atomic_helper_commit_cleanup_done] *ERROR* [CRTC:24:crtc-0] flip_done timed out
>
> and the kernel hanging, seemingly in an IRQs-off region.
Annoyingly, enabling DRM debug prevents the kernel hanging...
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
WARNING: multiple messages have this Message-ID (diff)
From: Russell King - ARM Linux <linux@armlinux.org.uk>
To: Liviu Dudau <liviu.dudau@arm.com>
Cc: David Airlie <airlied@linux.ie>,
Mali DP Maintainers <malidp@foss.arm.com>,
Brian Starkey <brian.starkey@arm.com>,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [BUG] hdlcd gets confused about base address
Date: Mon, 21 Nov 2016 14:30:53 +0000 [thread overview]
Message-ID: <20161121143053.GH1041@n2100.armlinux.org.uk> (raw)
In-Reply-To: <20161121132419.GF1041@n2100.armlinux.org.uk>
On Mon, Nov 21, 2016 at 01:24:19PM +0000, Russell King - ARM Linux wrote:
> On Mon, Nov 21, 2016 at 12:56:53PM +0000, Liviu Dudau wrote:
> > That is mostly due to the check in hdlcd_crtc_disable() which I should
> > remove, I've added it because I was getting a ->disable() hook call
> > before any ->enable() was called at startup time. I need to revisit
> > this as I remember Daniel was commenting that this was not needed.
>
> Removing that test results in:
>
> [drm:drm_atomic_helper_commit_cleanup_done] *ERROR* [CRTC:24:crtc-0] flip_done timed out
>
> and the kernel hanging, seemingly in an IRQs-off region.
Annoyingly, enabling DRM debug prevents the kernel hanging...
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
next prev parent reply other threads:[~2016-11-21 14:30 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-18 23:37 [BUG] hdlcd gets confused about base address Russell King - ARM Linux
2016-11-18 23:37 ` Russell King - ARM Linux
2016-11-21 9:44 ` Daniel Vetter
2016-11-21 9:44 ` Daniel Vetter
2016-11-21 11:06 ` Liviu Dudau
2016-11-21 11:06 ` Liviu Dudau
2016-11-21 11:20 ` Russell King - ARM Linux
2016-11-21 11:20 ` Russell King - ARM Linux
2016-11-21 11:32 ` Liviu Dudau
2016-11-21 11:32 ` Liviu Dudau
2016-11-21 12:25 ` Russell King - ARM Linux
2016-11-21 12:25 ` Russell King - ARM Linux
2016-11-21 12:56 ` Liviu Dudau
2016-11-21 12:56 ` Liviu Dudau
2016-11-21 13:24 ` Russell King - ARM Linux
2016-11-21 13:24 ` Russell King - ARM Linux
2016-11-21 13:50 ` Liviu Dudau
2016-11-21 13:50 ` Liviu Dudau
2016-11-21 14:03 ` Russell King - ARM Linux
2016-11-21 14:03 ` Russell King - ARM Linux
2016-11-21 17:32 ` Liviu Dudau
2016-11-21 17:32 ` Liviu Dudau
2016-11-21 17:56 ` Russell King - ARM Linux
2016-11-21 17:56 ` Russell King - ARM Linux
2016-11-21 18:16 ` Russell King - ARM Linux
2016-11-21 18:16 ` Russell King - ARM Linux
2016-11-21 18:25 ` Liviu Dudau
2016-11-21 18:25 ` Liviu Dudau
2016-11-21 18:23 ` Liviu Dudau
2016-11-21 18:23 ` Liviu Dudau
2016-11-21 18:43 ` Russell King - ARM Linux
2016-11-21 18:43 ` Russell King - ARM Linux
2016-11-21 14:30 ` Russell King - ARM Linux [this message]
2016-11-21 14:30 ` Russell King - ARM Linux
2016-11-21 14:55 ` Russell King - ARM Linux
2016-11-21 14:55 ` Russell King - ARM Linux
2016-11-22 7:02 ` Daniel Vetter
2016-11-22 7:02 ` Daniel Vetter
2017-02-20 12:16 ` Russell King - ARM Linux
2017-02-20 12:16 ` Russell King - ARM Linux
2017-02-20 17:53 ` Liviu Dudau
2017-02-20 17:53 ` Liviu Dudau
2017-02-20 17:57 ` Russell King - ARM Linux
2017-02-20 17:57 ` Russell King - ARM Linux
2017-02-20 18:05 ` Ville Syrjälä
2017-02-20 18:05 ` Ville Syrjälä
2017-02-20 18:59 ` Russell King - ARM Linux
2017-02-20 18:59 ` Russell King - ARM Linux
2017-02-22 15:42 ` Ville Syrjälä
2017-02-22 15:42 ` Ville Syrjälä
2017-02-26 19:31 ` Daniel Vetter
2017-02-26 19:31 ` Daniel Vetter
2017-02-22 15:15 ` Liviu Dudau
2017-02-22 15:15 ` Liviu Dudau
2017-02-22 15:30 ` Ville Syrjälä
2017-02-22 15:30 ` Ville Syrjälä
2017-03-08 16:30 ` [PATCH v2] drm: hdlcd: Fix the calculation of the scanout start address Liviu Dudau
2017-03-08 16:30 ` Liviu Dudau
2017-03-31 9:49 ` Russell King - ARM Linux
2017-03-31 9:49 ` Russell King - ARM Linux
2017-03-31 9:51 ` [PATCH 1/3] drm/arm: hdlcd: properly validate plane state Russell King
2017-03-31 9:51 ` Russell King
2017-03-31 10:18 ` Liviu Dudau
2017-03-31 10:18 ` Liviu Dudau
2017-03-31 10:20 ` Russell King - ARM Linux
2017-03-31 10:20 ` Russell King - ARM Linux
2017-03-31 10:23 ` Liviu Dudau
2017-03-31 10:23 ` Liviu Dudau
2017-03-31 10:27 ` Russell King - ARM Linux
2017-03-31 10:27 ` Russell King - ARM Linux
2017-03-31 11:41 ` Liviu Dudau
2017-03-31 11:41 ` Liviu Dudau
2017-03-31 12:21 ` Russell King - ARM Linux
2017-03-31 12:21 ` Russell King - ARM Linux
2017-03-31 9:51 ` [PATCH 2/3] drm/arm: hdlcd: fix plane base address calculation Russell King
2017-03-31 9:51 ` Russell King
2017-03-31 13:13 ` Liviu Dudau
2017-03-31 13:13 ` Liviu Dudau
2017-03-31 9:51 ` [PATCH 3/3] drm/arm: hdlcd: check for rotation Russell King
2017-03-31 9:51 ` Russell King
2017-03-31 10:11 ` Ville Syrjälä
2017-03-31 10:11 ` Ville Syrjälä
2017-03-31 10:21 ` Liviu Dudau
2017-03-31 10:21 ` Liviu Dudau
2017-03-31 13:18 ` [PATCH v2] drm: hdlcd: Fix the calculation of the scanout start address Liviu Dudau
2017-03-31 13:18 ` Liviu Dudau
2017-03-31 13:48 ` Russell King - ARM Linux
2017-03-31 13:48 ` Russell King - ARM Linux
2017-04-03 10:31 ` Liviu Dudau
2017-04-03 10:31 ` Liviu Dudau
2017-04-03 13:13 ` Russell King - ARM Linux
2017-04-03 13:13 ` Russell King - ARM Linux
2017-04-03 14:07 ` Liviu Dudau
2017-04-03 14:07 ` Liviu Dudau
2017-04-06 11:07 ` Jani Nikula
2017-04-06 11:07 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161121143053.GH1041@n2100.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.