From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [linux-sunxi][PATCH 2/3] ARM: dts: sun6i: Add the SPDIF block to the A31
Date: Tue, 20 Dec 2016 11:40:37 +0100 [thread overview]
Message-ID: <20161220104038.22532-3-codekipper@gmail.com> (raw)
In-Reply-To: <20161220104038.22532-1-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
Add the SPDIF transceiver controller block to the A31 dtsi.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 7370ba6c9993..559c53efa7e6 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -613,6 +613,20 @@
reg = <0x01c20ca0 0x20>;
};
+ spdif: spdif at 01c21000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun6i-a31-spdif";
+ reg = <0x01c21000 0x400>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_SPDIF>, <&ccu CLK_SPDIF>;
+ resets = <&ccu RST_APB1_SPDIF>;
+ clock-names = "apb", "spdif";
+ dmas = <&dma 2>, <&dma 2>;
+ dma-names = "rx", "tx";
+ spdif-out = "disabled";
+ status = "disabled";
+ };
+
lradc: lradc at 01c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Marcus Cooper
<codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 2/3] ARM: dts: sun6i: Add the SPDIF block to the A31
Date: Tue, 20 Dec 2016 11:40:37 +0100 [thread overview]
Message-ID: <20161220104038.22532-3-codekipper@gmail.com> (raw)
In-Reply-To: <20161220104038.22532-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Add the SPDIF transceiver controller block to the A31 dtsi.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 7370ba6c9993..559c53efa7e6 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -613,6 +613,20 @@
reg = <0x01c20ca0 0x20>;
};
+ spdif: spdif@01c21000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun6i-a31-spdif";
+ reg = <0x01c21000 0x400>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_SPDIF>, <&ccu CLK_SPDIF>;
+ resets = <&ccu RST_APB1_SPDIF>;
+ clock-names = "apb", "spdif";
+ dmas = <&dma 2>, <&dma 2>;
+ dma-names = "rx", "tx";
+ spdif-out = "disabled";
+ status = "disabled";
+ };
+
lradc: lradc@01c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
--
2.11.0
next prev parent reply other threads:[~2016-12-20 10:40 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-20 10:40 [linux-sunxi][PATCH 0/3] Enable SPDIF on the Mele I7 codekipper at gmail.com
2016-12-20 10:40 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-12-20 10:40 ` [linux-sunxi][PATCH 1/3] ARM: dts: sun6i: Add SPDIF TX pin to the A31 codekipper at gmail.com
2016-12-20 10:40 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-12-20 19:07 ` [linux-sunxi][PATCH " Maxime Ripard
2016-12-20 19:07 ` [PATCH " Maxime Ripard
2016-12-20 10:40 ` codekipper at gmail.com [this message]
2016-12-20 10:40 ` [PATCH 2/3] ARM: dts: sun6i: Add the SPDIF block " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-12-20 14:07 ` [linux-sunxi][PATCH " Maxime Ripard
2016-12-20 14:07 ` [PATCH " Maxime Ripard
2016-12-20 14:34 ` [linux-sunxi][PATCH " Code Kipper
2016-12-20 14:34 ` [PATCH " Code Kipper
2016-12-20 19:11 ` [linux-sunxi][PATCH " Maxime Ripard
2016-12-20 19:11 ` [PATCH " Maxime Ripard
2016-12-20 10:40 ` [linux-sunxi][PATCH 3/3] ARM: dts: sun6i: Add SPDIF to the Mele I7 codekipper at gmail.com
2016-12-20 10:40 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2017-01-07 19:16 ` [linux-sunxi][PATCH " Chen-Yu Tsai
2017-01-07 19:16 ` Chen-Yu Tsai
2017-01-09 10:03 ` Maxime Ripard
2017-01-09 10:03 ` [PATCH " Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161220104038.22532-3-codekipper@gmail.com \
--to=codekipper@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.