From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [linux-sunxi][PATCH 3/3] ARM: dts: sun6i: Add SPDIF to the Mele I7
Date: Tue, 20 Dec 2016 11:40:38 +0100 [thread overview]
Message-ID: <20161220104038.22532-4-codekipper@gmail.com> (raw)
In-Reply-To: <20161220104038.22532-1-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
Enable the S/PDIF transmitter that is present on the Mele I7.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
arch/arm/boot/dts/sun6i-a31-i7.dts | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
index a2193309a199..2bc57d2dcd80 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -69,6 +69,23 @@
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
};
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "On-board SPDIF";
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
};
&codec {
@@ -138,6 +155,13 @@
status = "okay";
};
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_pins_a>;
+ spdif-out = "okay";
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Marcus Cooper
<codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 3/3] ARM: dts: sun6i: Add SPDIF to the Mele I7
Date: Tue, 20 Dec 2016 11:40:38 +0100 [thread overview]
Message-ID: <20161220104038.22532-4-codekipper@gmail.com> (raw)
In-Reply-To: <20161220104038.22532-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Enable the S/PDIF transmitter that is present on the Mele I7.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/sun6i-a31-i7.dts | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
index a2193309a199..2bc57d2dcd80 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -69,6 +69,23 @@
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
};
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "On-board SPDIF";
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
};
&codec {
@@ -138,6 +155,13 @@
status = "okay";
};
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_pins_a>;
+ spdif-out = "okay";
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
--
2.11.0
next prev parent reply other threads:[~2016-12-20 10:40 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-20 10:40 [linux-sunxi][PATCH 0/3] Enable SPDIF on the Mele I7 codekipper at gmail.com
2016-12-20 10:40 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-12-20 10:40 ` [linux-sunxi][PATCH 1/3] ARM: dts: sun6i: Add SPDIF TX pin to the A31 codekipper at gmail.com
2016-12-20 10:40 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-12-20 19:07 ` [linux-sunxi][PATCH " Maxime Ripard
2016-12-20 19:07 ` [PATCH " Maxime Ripard
2016-12-20 10:40 ` [linux-sunxi][PATCH 2/3] ARM: dts: sun6i: Add the SPDIF block " codekipper at gmail.com
2016-12-20 10:40 ` [PATCH " codekipper-Re5JQEeQqe8AvxtiuMwx3w
2016-12-20 14:07 ` [linux-sunxi][PATCH " Maxime Ripard
2016-12-20 14:07 ` [PATCH " Maxime Ripard
2016-12-20 14:34 ` [linux-sunxi][PATCH " Code Kipper
2016-12-20 14:34 ` [PATCH " Code Kipper
2016-12-20 19:11 ` [linux-sunxi][PATCH " Maxime Ripard
2016-12-20 19:11 ` [PATCH " Maxime Ripard
2016-12-20 10:40 ` codekipper at gmail.com [this message]
2016-12-20 10:40 ` [PATCH 3/3] ARM: dts: sun6i: Add SPDIF to the Mele I7 codekipper-Re5JQEeQqe8AvxtiuMwx3w
2017-01-07 19:16 ` [linux-sunxi][PATCH " Chen-Yu Tsai
2017-01-07 19:16 ` Chen-Yu Tsai
2017-01-09 10:03 ` Maxime Ripard
2017-01-09 10:03 ` [PATCH " Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161220104038.22532-4-codekipper@gmail.com \
--to=codekipper@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.