[PATCH v4 2/3] ARM: dts: vf610-zii-dev: Add .dts file for rev. C

[shawnguo@kernel.org (Shawn Guo)]

On Sun, Dec 18, 2016 at 11:17:56PM -0800, Andrey Smirnov wrote:
> Add .dts file for rev. C of the board by factoring out commonalities
> into a shared include file (vf610-zii-dev-rev-b-c.dtsi) and deriving
> revision specific file from it (vf610-zii-dev-rev-b.dts and
> vf610-zii-dev-reb-c.dts).
> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>

<snip>

> +/ {
> +	model = "ZII VF610 Development Board, Rev C";
> +	compatible = "zii,vf610dev-c", "zii,vf610dev", "fsl,vf610";
> +
> +	mdio-mux {
> +		compatible = "mdio-mux-gpio";
> +		pinctrl-0 = <&pinctrl_mdio_mux>;
> +		pinctrl-names = "default";
> +		gpios = <&gpio0 8  GPIO_ACTIVE_HIGH
> +			 &gpio0 9  GPIO_ACTIVE_HIGH
> +			 &gpio0 25 GPIO_ACTIVE_HIGH>;
> +		mdio-parent-bus = <&mdio1>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		mdio_mux_1: mdio at 1 {
> +			reg = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			switch0: switch0 at 0 {

Drop the zero in node name.

	switch0: switch at 0

> +				compatible = "marvell,mv88e6190";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <0>;
> +				dsa,member = <0 0>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port at 0 {
> +						reg = <0>;
> +						label = "cpu";
> +						ethernet = <&fec1>;

Please have a newline between properties and child node.

Shawn

> +						fixed-link {
> +							speed = <100>;
> +							full-duplex;
> +						};
> +					};
> +
> +					port at 1 {
> +						reg = <1>;
> +						label = "lan1";
> +					};
> +
> +					port at 2 {
> +						reg = <2>;
> +						label = "lan2";
> +					};
> +
> +					port at 3 {
> +						reg = <3>;
> +						label = "lan3";
> +					};
> +
> +					port at 4 {
> +						reg = <4>;
> +						label = "lan4";
> +					};
> +
> +					switch0port10: port at 10 {
> +						reg = <10>;
> +						label = "dsa";
> +						phy-mode = "xgmii";
> +						link = <&switch1port10>;
> +					};
> +				};
> +			};
> +		};
> +
> +		mdio_mux_2: mdio at 2 {
> +			reg = <2>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			switch1: switch1 at 0 {
> +				compatible = "marvell,mv88e6190";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <0>;
> +				dsa,member = <0 1>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port at 1 {
> +						reg = <1>;
> +						label = "lan5";
> +					};
> +
> +					port at 2 {
> +						reg = <2>;
> +						label = "lan6";
> +					};
> +
> +					port at 3 {
> +						reg = <3>;
> +						label = "lan7";
> +					};
> +
> +					port at 4 {
> +						reg = <4>;
> +						label = "lan8";
> +					};
> +
> +
> +					switch1port10: port at 10 {
> +						reg = <10>;
> +						label = "dsa";
> +						phy-mode = "xgmii";
> +						link = <&switch0port10>;
> +					};
> +				};
> +			};
> +		};
> +
> +		mdio_mux_4: mdio at 4 {
> +			reg = <4>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +	};
> +};
> +
> +&dspi0 {
> +	bus-num = <0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_dspi0>;
> +	status = "okay";
> +	spi-num-chipselects = <2>;
> +
> +	m25p128 at 0 {
> +		compatible = "m25p128", "jedec,spi-nor";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		reg = <0>;
> +		spi-max-frequency = <1000000>;
> +	};
> +
> +	atzb-rf-233 at 1 {
> +		compatible = "atmel,at86rf233";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctr_atzb_rf_233>;
> +
> +		spi-max-frequency = <7500000>;
> +		reg = <1>;
> +		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-parent = <&gpio3>;
> +		xtal-trim = /bits/ 8 <0x06>;
> +
> +		sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
> +		reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>;
> +
> +		fsl,spi-cs-sck-delay = <180>;
> +		fsl,spi-sck-cs-delay = <250>;
> +	};
> +};
> +
> +&i2c0 {
> +	/*
> +	 * U712
> +	 *
> +	 * Exposed signals:
> +	 *    P1 - WE2_CMD
> +	 *    P2 - WE2_CLK
> +	 */
> +	gpio5: pca9557 at 18 {
> +		compatible = "nxp,pca9557";
> +		reg = <0x18>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +	};
> +
> +	/*
> +	 * U121
> +	 *
> +	 * Exposed signals:
> +	 *    I/O0  - ENET_SWR_EN
> +	 *    I/O1  - ESW1_RESETn
> +	 *    I/O2  - ARINC_RESET
> +	 *    I/O3  - DD1_IO_RESET
> +	 *    I/O4  - ESW2_RESETn
> +	 *    I/O5  - ESW3_RESETn
> +	 *    I/O6  - ESW4_RESETn
> +	 *    I/O8  - TP909
> +	 *    I/O9  - FEM_SEL
> +	 *    I/O10 - WIFI_RESETn
> +	 *    I/O11 - PHY_RSTn
> +	 *    I/O12 - OPT1_SD
> +	 *    I/O13 - OPT2_SD
> +	 *    I/O14 - OPT1_TX_DIS
> +	 *    I/O15 - OPT2_TX_DIS
> +	 */
> +	gpio6: sx1503 at 20 {
> +		compatible = "semtech,sx1503q";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_sx1503_20>;
> +		#gpio-cells = <2>;
> +		#interrupt-cells = <2>;
> +		reg = <0x20>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
> +		gpio-controller;
> +		interrupt-controller;
> +
> +		enet_swr_en {
> +			gpio-hog;
> +			gpios = <0 GPIO_ACTIVE_HIGH>;
> +			output-high;
> +			line-name = "enet-swr-en";
> +		};
> +	};
> +
> +	/*
> +	 * U715
> +	 *
> +	 * Exposed signals:
> +	 *     IO0 - WE1_CLK
> +	 *     IO1 - WE1_CMD
> +	 */
> +	gpio7: pca9554 at 22 {
> +		compatible = "nxp,pca9554";
> +		reg = <0x22>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +	};
> +};
> +
> +&i2c1 {
> +	at24mac602 at 00 {
> +		compatible = "atmel,24c02";
> +		reg = <0x50>;
> +		read-only;
> +	};
> +};
> +
> +&i2c2 {
> +	tca9548 at 70 {
> +		compatible = "nxp,pca9548";
> +		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
> +		pinctrl-names = "default";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		reg = <0x70>;
> +		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
> +
> +		i2c at 0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0>;
> +		};
> +
> +		i2c at 1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			sfp2: at24c04 at 50 {
> +				compatible = "atmel,24c02";
> +				reg = <0x50>;
> +			};
> +		};
> +
> +		i2c at 2 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <2>;
> +
> +			sfp3: at24c04 at 50 {
> +				compatible = "atmel,24c02";
> +				reg = <0x50>;
> +			};
> +		};
> +
> +		i2c at 3 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <3>;
> +		};
> +	};
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart3>;
> +	status = "okay";
> +};
> +
> +&gpio0 {
> +	eth0_intrp {
> +		gpio-hog;
> +		gpios = <23 GPIO_ACTIVE_HIGH>;
> +		input;
> +		line-name = "sx1503-irq";
> +	};
> +};
> +
> +&gpio3 {
> +	eth0_intrp {
> +		gpio-hog;
> +		gpios = <2 GPIO_ACTIVE_HIGH>;
> +		input;
> +		line-name = "eth0-intrp";
> +	};
> +};
> +
> +&fec0 {
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		status = "okay";
> +
> +		ethernet-phy at 0 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_fec0_phy_int>;
> +
> +			interrupt-parent = <&gpio3>;
> +			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> +			reg = <0>;
> +		};
> +	};
> +};
> +
> +&iomuxc {
> +	pinctr_atzb_rf_233: pinctrl-atzb-rf-233 {
> +		fsl,pins = <
> +			VF610_PAD_PTB2__GPIO_24		0x31c2
> +			VF610_PAD_PTE27__GPIO_132	0x33e2
> +		>;
> +	};
> +
> +
> +	pinctrl_sx1503_20: pinctrl-sx1503-20 {
> +		fsl,pins = <
> +			VF610_PAD_PTB1__GPIO_23		0x219d
> +		>;
> +	};
> +
> +	pinctrl_uart3: uart3grp {
> +		fsl,pins = <
> +			VF610_PAD_PTA20__UART3_TX	0x21a2
> +			VF610_PAD_PTA21__UART3_RX	0x21a1
> +		>;
> +	};
> +
> +	pinctrl_mdio_mux: pinctrl-mdio-mux {
> +		fsl,pins = <
> +			VF610_PAD_PTA18__GPIO_8		0x31c2
> +			VF610_PAD_PTA19__GPIO_9		0x31c2
> +			VF610_PAD_PTB3__GPIO_25		0x31c2
> +		>;
> +	};
> +
> +	pinctrl_fec0_phy_int: pinctrl-fec0-phy-int {
> +		fsl,pins = <
> +			VF610_PAD_PTB28__GPIO_98	0x219d
> +		>;
> +	};
> +};
> diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
> new file mode 100644
> index 0000000..9f5e2e7
> --- /dev/null
> +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
> @@ -0,0 +1,383 @@
> +/*
> + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
> + *
> + * Based on an original 'vf610-twr.dts' which is Copyright 2015,
> + * Freescale Semiconductor, Inc.
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License
> + *     version 2 as published by the Free Software Foundation.
> + *
> + *     This file is distributed in the hope that it will be useful
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use
> +n *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "vf610.dtsi"
> +
> +/ {
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory {
> +		reg = <0x80000000 0x20000000>;
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +		pinctrl-0 = <&pinctrl_leds_debug>;
> +		pinctrl-names = "default";
> +
> +		debug {
> +			label = "zii:green:debug1";
> +			gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_3v3_mcu";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	usb0_vbus: regulator-usb0-vbus {
> +		compatible = "regulator-fixed";
> +		pinctrl-0 = <&pinctrl_usb_vbus>;
> +		regulator-name = "usb_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		gpio = <&gpio0 6 0>;
> +	};
> +};
> +
> +&adc0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_adc0_ad5>;
> +	vref-supply = <&reg_vcc_3v3_mcu>;
> +	status = "okay";
> +};
> +
> +&edma0 {
> +	status = "okay";
> +};
> +
> +&esdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_esdhc1>;
> +	bus-width = <4>;
> +	status = "okay";
> +};
> +
> +&fec0 {
> +	phy-mode = "rmii";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec0>;
> +	status = "okay";
> +};
> +
> +&fec1 {
> +	phy-mode = "rmii";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec1>;
> +	status = "okay";
> +
> +	fixed-link {
> +		   speed = <100>;
> +		   full-duplex;
> +	};
> +
> +	mdio1: mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		status = "okay";
> +	};
> +};
> +
> +&i2c0 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default", "gpio";
> +	pinctrl-0 = <&pinctrl_i2c0>;
> +	pinctrl-1 = <&pinctrl_i2c0_gpio>;
> +	scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
> +	sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> +	status = "okay";
> +
> +	lm75 at 48 {
> +		compatible = "national,lm75";
> +		reg = <0x48>;
> +	};
> +
> +	at24c04 at 50 {
> +		compatible = "atmel,24c04";
> +		reg = <0x50>;
> +	};
> +
> +	at24c04 at 52 {
> +		compatible = "atmel,24c04";
> +		reg = <0x52>;
> +	};
> +
> +	ds1682 at 6b {
> +		compatible = "dallas,ds1682";
> +		reg = <0x6b>;
> +	};
> +};
> +
> +&i2c1 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart0>;
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	status = "okay";
> +};
> +
> +&usbdev0 {
> +	disable-over-current;
> +	vbus-supply = <&usb0_vbus>;
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usbh1 {
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&usbmisc0 {
> +	status = "okay";
> +};
> +
> +&usbmisc1 {
> +	status = "okay";
> +};
> +
> +&usbphy0 {
> +	status = "okay";
> +};
> +
> +&usbphy1 {
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_adc0_ad5: adc0ad5grp {
> +		fsl,pins = <
> +			VF610_PAD_PTC30__ADC0_SE5	0x00a1
> +		>;
> +	};
> +
> +	pinctrl_dspi0: dspi0grp {
> +		fsl,pins = <
> +			VF610_PAD_PTB18__DSPI0_CS1	0x1182
> +			VF610_PAD_PTB19__DSPI0_CS0	0x1182
> +			VF610_PAD_PTB20__DSPI0_SIN	0x1181
> +			VF610_PAD_PTB21__DSPI0_SOUT	0x1182
> +			VF610_PAD_PTB22__DSPI0_SCK	0x1182
> +		>;
> +	};
> +
> +	pinctrl_dspi2: dspi2grp {
> +		fsl,pins = <
> +			VF610_PAD_PTD31__DSPI2_CS1	0x1182
> +			VF610_PAD_PTD30__DSPI2_CS0	0x1182
> +			VF610_PAD_PTD29__DSPI2_SIN	0x1181
> +			VF610_PAD_PTD28__DSPI2_SOUT	0x1182
> +			VF610_PAD_PTD27__DSPI2_SCK	0x1182
> +		>;
> +	};
> +
> +	pinctrl_esdhc1: esdhc1grp {
> +		fsl,pins = <
> +			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
> +			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
> +			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
> +			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
> +			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
> +			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
> +			VF610_PAD_PTA7__GPIO_134	0x219d
> +		>;
> +	};
> +
> +	pinctrl_fec0: fec0grp {
> +		fsl,pins = <
> +			VF610_PAD_PTC0__ENET_RMII0_MDC	0x30d2
> +			VF610_PAD_PTC1__ENET_RMII0_MDIO	0x30d3
> +			VF610_PAD_PTC2__ENET_RMII0_CRS	0x30d1
> +			VF610_PAD_PTC3__ENET_RMII0_RXD1	0x30d1
> +			VF610_PAD_PTC4__ENET_RMII0_RXD0	0x30d1
> +			VF610_PAD_PTC5__ENET_RMII0_RXER	0x30d1
> +			VF610_PAD_PTC6__ENET_RMII0_TXD1	0x30d2
> +			VF610_PAD_PTC7__ENET_RMII0_TXD0	0x30d2
> +			VF610_PAD_PTC8__ENET_RMII0_TXEN	0x30d2
> +		>;
> +	};
> +
> +	pinctrl_fec1: fec1grp {
> +		fsl,pins = <
> +			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
> +			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
> +			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
> +			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
> +			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
> +			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
> +			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
> +			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
> +			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
> +			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
> +		>;
> +	};
> +
> +	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
> +		fsl,pins = <
> +			VF610_PAD_PTB22__GPIO_44	0x33e2
> +			VF610_PAD_PTB21__GPIO_43	0x33e2
> +			VF610_PAD_PTB20__GPIO_42	0x33e1
> +			VF610_PAD_PTB19__GPIO_41	0x33e2
> +			VF610_PAD_PTB18__GPIO_40	0x33e2
> +		>;
> +	};
> +
> +	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
> +		fsl,pins = <
> +			 VF610_PAD_PTE14__GPIO_119	0x31c2
> +			 >;
> +	};
> +
> +	pinctrl_i2c0: i2c0grp {
> +		fsl,pins = <
> +			VF610_PAD_PTB14__I2C0_SCL	0x37ff
> +			VF610_PAD_PTB15__I2C0_SDA	0x37ff
> +		>;
> +	};
> +
> +	pinctrl_i2c0_gpio: i2c0grp-gpio {
> +		fsl,pins = <
> +			VF610_PAD_PTB14__GPIO_36	0x31c2
> +			VF610_PAD_PTB15__GPIO_37	0x31c2
> +		>;
> +	};
> +
> +	
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			VF610_PAD_PTB16__I2C1_SCL	0x37ff
> +			VF610_PAD_PTB17__I2C1_SDA	0x37ff
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			VF610_PAD_PTA22__I2C2_SCL	0x37ff
> +			VF610_PAD_PTA23__I2C2_SDA	0x37ff
> +		>;
> +	};
> +
> +	pinctrl_leds_debug: pinctrl-leds-debug {
> +		fsl,pins = <
> +			 VF610_PAD_PTD20__GPIO_74	0x31c2
> +			 >;
> +	};
> +
> +	pinctrl_qspi0: qspi0grp {
> +		fsl,pins = <
> +			VF610_PAD_PTD7__QSPI0_B_QSCK	0x31c3
> +			VF610_PAD_PTD8__QSPI0_B_CS0	0x31ff
> +			VF610_PAD_PTD9__QSPI0_B_DATA3	0x31c3
> +			VF610_PAD_PTD10__QSPI0_B_DATA2	0x31c3
> +			VF610_PAD_PTD11__QSPI0_B_DATA1	0x31c3
> +			VF610_PAD_PTD12__QSPI0_B_DATA0	0x31c3
> +		>;
> +	};
> +
> +	pinctrl_uart0: uart0grp {
> +		fsl,pins = <
> +			VF610_PAD_PTB10__UART0_TX	0x21a2
> +			VF610_PAD_PTB11__UART0_RX	0x21a1
> +		>;
> +	};
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			VF610_PAD_PTB23__UART1_TX	0x21a2
> +			VF610_PAD_PTB24__UART1_RX	0x21a1
> +		>;
> +	};
> +
> +	pinctrl_uart2: uart2grp {
> +		fsl,pins = <
> +			VF610_PAD_PTD0__UART2_TX	0x21a2
> +			VF610_PAD_PTD1__UART2_RX	0x21a1
> +		>;
> +	};
> +
> +	pinctrl_usb_vbus: pinctrl-usb-vbus {
> +		fsl,pins = <
> +			VF610_PAD_PTA16__GPIO_6	0x31c2
> +		>;
> +	};
> +
> +	pinctrl_usb0_host: usb0-host-grp {
> +		fsl,pins = <
> +			VF610_PAD_PTD6__GPIO_85		0x0062
> +		>;
> +	};
> +};
> -- 
> 2.5.5
>