From: Tony Lindgren <tony@atomide.com>
To: Pavel Machek <pavel@ucw.cz>
Cc: pali.rohar@gmail.com, sre@kernel.org,
kernel list <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-omap@vger.kernel.org, khilman@kernel.org,
aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com,
patrikbachan@gmail.com, serge@hallyn.com, abcloriens@gmail.com,
b-liu@ti.com, linux-usb@vger.kernel.org
Subject: Re: v4.9 to v4.10 regression: oops when USB cable is plugged in.
Date: Mon, 23 Jan 2017 14:44:54 -0800 [thread overview]
Message-ID: <20170123224454.GY7403@atomide.com> (raw)
In-Reply-To: <20170123222537.GA11543@amd>
* Pavel Machek <pavel@ucw.cz> [170123 14:26]:
> [25392.239837] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060
> [25392.239868] pgd = c0004000
> [25392.239898] [fa0ab060] *pgd=48011452(bad)
> [25392.239929] Internal error: : 1028 [#1] ARM
> [25392.239929] Modules linked in:
> [25392.239959] CPU: 0 PID: 24322 Comm: kworker/0:1 Not tainted 4.10.0-rc5-142127-g41f2839-dirty #222
> [25392.239990] Hardware name: Nokia RX-51 board
> [25392.240020] Workqueue: events musb_irq_work
> [25392.240051] task: cd44d5c0 task.stack: cd308000
> [25392.240051] PC is at musb_default_readb+0x0/0xc
> [25392.240081] LR is at musb_irq_work+0x1c/0x1b0
OK I'm pretty sure the patch I posted few days ago fixes
this. Can you please test patch "[PATCH] usb: musb: Fix
external abort on non-linefetch for musb_irq_work()"?
I was able to hit that only once so far, do you hit it
every time with your built-in g_ether .config?
Regards,
Tony
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: v4.9 to v4.10 regression: oops when USB cable is plugged in.
Date: Mon, 23 Jan 2017 14:44:54 -0800 [thread overview]
Message-ID: <20170123224454.GY7403@atomide.com> (raw)
In-Reply-To: <20170123222537.GA11543@amd>
* Pavel Machek <pavel@ucw.cz> [170123 14:26]:
> [25392.239837] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060
> [25392.239868] pgd = c0004000
> [25392.239898] [fa0ab060] *pgd=48011452(bad)
> [25392.239929] Internal error: : 1028 [#1] ARM
> [25392.239929] Modules linked in:
> [25392.239959] CPU: 0 PID: 24322 Comm: kworker/0:1 Not tainted 4.10.0-rc5-142127-g41f2839-dirty #222
> [25392.239990] Hardware name: Nokia RX-51 board
> [25392.240020] Workqueue: events musb_irq_work
> [25392.240051] task: cd44d5c0 task.stack: cd308000
> [25392.240051] PC is at musb_default_readb+0x0/0xc
> [25392.240081] LR is at musb_irq_work+0x1c/0x1b0
OK I'm pretty sure the patch I posted few days ago fixes
this. Can you please test patch "[PATCH] usb: musb: Fix
external abort on non-linefetch for musb_irq_work()"?
I was able to hit that only once so far, do you hit it
every time with your built-in g_ether .config?
Regards,
Tony
next prev parent reply other threads:[~2017-01-23 22:44 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-23 22:25 v4.9 to v4.10 regression: oops when USB cable is plugged in Pavel Machek
2017-01-23 22:25 ` Pavel Machek
2017-01-23 22:25 ` Pavel Machek
2017-01-23 22:44 ` Tony Lindgren [this message]
2017-01-23 22:44 ` Tony Lindgren
2017-01-24 9:18 ` Pavel Machek
2017-01-24 9:18 ` Pavel Machek
2017-01-24 10:01 ` Pali Rohár
2017-01-24 10:01 ` Pali Rohár
2017-01-24 14:51 ` Tony Lindgren
2017-01-24 14:51 ` Tony Lindgren
2017-01-27 21:55 ` Pavel Machek
2017-01-27 21:55 ` Pavel Machek
2017-01-27 21:55 ` Pavel Machek
2017-01-27 23:48 ` Sebastian Reichel
2017-01-27 23:48 ` Sebastian Reichel
2017-02-03 7:59 ` Pavel Machek
2017-02-03 7:59 ` Pavel Machek
2017-02-03 16:30 ` Tony Lindgren
2017-02-03 16:30 ` Tony Lindgren
[not found] ` <20170203163048.GA3721-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-02-05 21:44 ` Pavel Machek
2017-02-05 21:44 ` Pavel Machek
2017-02-05 21:44 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170123224454.GY7403@atomide.com \
--to=tony@atomide.com \
--cc=aaro.koskinen@iki.fi \
--cc=abcloriens@gmail.com \
--cc=b-liu@ti.com \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=patrikbachan@gmail.com \
--cc=pavel@ucw.cz \
--cc=serge@hallyn.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.