From: AKASHI Takahiro <takahiro.akashi@linaro.org>
To: Mark Rutland <mark.rutland@arm.com>
Cc: geoff@infradead.org, catalin.marinas@arm.com,
will.deacon@arm.com, james.morse@arm.com,
bauerman@linux.vnet.ibm.com, dyoung@redhat.com,
kexec@lists.infradead.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v31 09/12] arm64: kdump: provide /proc/vmcore file
Date: Thu, 2 Feb 2017 15:24:09 +0900 [thread overview]
Message-ID: <20170202062408.GC13549@linaro.org> (raw)
In-Reply-To: <20170201192121.GB30584@leverpostej>
On Wed, Feb 01, 2017 at 07:21:22PM +0000, Mark Rutland wrote:
> On Wed, Feb 01, 2017 at 09:46:28PM +0900, AKASHI Takahiro wrote:
> > Add arch-specific functions to provide a dump file, /proc/vmcore.
> >
> > This file is in ELF format and its ELF header needs to be prepared by
> > userspace tools, like kexec-tools, in adance. The primary kernel is
> > responsible to allocate the region with reserve_elfcorehdr() at boot time
> > and advertize its location to crash dump kernel via a new device-tree
> > property, "linux,elfcorehdr".
>
> > +static int __init early_init_dt_scan_elfcorehdr(unsigned long node,
> > + const char *uname, int depth, void *data)
> > +{
> > + const __be32 *reg;
> > + int len;
> > +
> > + if (depth != 1 || strcmp(uname, "chosen") != 0)
> > + return 0;
> > +
> > + reg = of_get_flat_dt_prop(node, "linux,elfcorehdr", &len);
> > + if (!reg || (len < (dt_root_addr_cells + dt_root_size_cells)))
> > + return 1;
> > +
> > + elfcorehdr_addr = dt_mem_next_cell(dt_root_addr_cells, ®);
> > + elfcorehdr_size = dt_mem_next_cell(dt_root_size_cells, ®);
> > +
> > + return 1;
> > +}
> > +
> > +/*
> > + * reserve_elfcorehdr() - reserves memory for elf core header
> > + *
> > + * This function reserves elf core header given in "elfcorehdr=" kernel
> > + * command line parameter. This region contains all the information about
> > + * primary kernel's core image and is used by a dump capture kernel to
> > + * access the system memory on primary kernel.
> > + */
> > +static void __init reserve_elfcorehdr(void)
> > +{
> > + of_scan_flat_dt(early_init_dt_scan_elfcorehdr, NULL);
> > +
> > + if (!elfcorehdr_size)
> > + return;
> > +
> > + if (memblock_is_region_reserved(elfcorehdr_addr, elfcorehdr_size)) {
> > + pr_warn("elfcorehdr is overlapped\n");
> > + return;
> > + }
> > +
> > + memblock_reserve(elfcorehdr_addr, elfcorehdr_size);
> > +
> > + pr_info("Reserving %lldKB of memory at 0x%llx for elfcorehdr\n",
> > + elfcorehdr_size >> 10, elfcorehdr_addr);
> > +}
>
> This doesn't seem right to me. The logic here doesn't match the commit
> message, the comment above reserve_elfcorehdr() doesn't match the
> implementation, and this doesn't match my understanding of how this was
> intended to be used from the DT binding.
Surely the commit message was wrong/misleading; It should say
===8<===
Arch-specific functions are added to allow for implementing a crash dump
file interface, /proc/vmcore, which can be viewed as a ELF file.
A user space tool, like kexec-tools, is responsible for allocating
a separate region for the core's ELF header within crash kdump kernel
memory and filling it in when executing kexec_load().
Then, its location will be advertised to crash dump kernel via a new
device-tree property, "linux,elfcorehdr", and crash dump kernel preserves
the region for later use with reserve_elfcorehdr() at boot time.
On crash dump kernel, /proc/vmcore will access the primary kernel's memory
with copy_oldmem_page(), which feeds the data page-by-page by ioremap'ing
it since it does not reside in linear mapping on crash dump kernel.
Meanwhile, elfcorehdr_read() is simple as the region is always mapped.
===>8===
Does this make things clear?
> I had assumed that we'd treat this in much the same way as the
> linux,reserved-memory-region property, with the primary kernel either
> dynamically allocating the region or using a command line option, and
> the base being exposed to userspace via /sys/ or /proc/ somehow.
I didn't get the point here, but please note that the data in ELF core header
is produced by kexec-tools (who knows its location, too), and consumed solely
by the crash dump kernel.
Thanks,
-Takahiro AKASHI
> Why is that not the case?
>
> Thanks,
> Mark.
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
WARNING: multiple messages have this Message-ID (diff)
From: takahiro.akashi@linaro.org (AKASHI Takahiro)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v31 09/12] arm64: kdump: provide /proc/vmcore file
Date: Thu, 2 Feb 2017 15:24:09 +0900 [thread overview]
Message-ID: <20170202062408.GC13549@linaro.org> (raw)
In-Reply-To: <20170201192121.GB30584@leverpostej>
On Wed, Feb 01, 2017 at 07:21:22PM +0000, Mark Rutland wrote:
> On Wed, Feb 01, 2017 at 09:46:28PM +0900, AKASHI Takahiro wrote:
> > Add arch-specific functions to provide a dump file, /proc/vmcore.
> >
> > This file is in ELF format and its ELF header needs to be prepared by
> > userspace tools, like kexec-tools, in adance. The primary kernel is
> > responsible to allocate the region with reserve_elfcorehdr() at boot time
> > and advertize its location to crash dump kernel via a new device-tree
> > property, "linux,elfcorehdr".
>
> > +static int __init early_init_dt_scan_elfcorehdr(unsigned long node,
> > + const char *uname, int depth, void *data)
> > +{
> > + const __be32 *reg;
> > + int len;
> > +
> > + if (depth != 1 || strcmp(uname, "chosen") != 0)
> > + return 0;
> > +
> > + reg = of_get_flat_dt_prop(node, "linux,elfcorehdr", &len);
> > + if (!reg || (len < (dt_root_addr_cells + dt_root_size_cells)))
> > + return 1;
> > +
> > + elfcorehdr_addr = dt_mem_next_cell(dt_root_addr_cells, ®);
> > + elfcorehdr_size = dt_mem_next_cell(dt_root_size_cells, ®);
> > +
> > + return 1;
> > +}
> > +
> > +/*
> > + * reserve_elfcorehdr() - reserves memory for elf core header
> > + *
> > + * This function reserves elf core header given in "elfcorehdr=" kernel
> > + * command line parameter. This region contains all the information about
> > + * primary kernel's core image and is used by a dump capture kernel to
> > + * access the system memory on primary kernel.
> > + */
> > +static void __init reserve_elfcorehdr(void)
> > +{
> > + of_scan_flat_dt(early_init_dt_scan_elfcorehdr, NULL);
> > +
> > + if (!elfcorehdr_size)
> > + return;
> > +
> > + if (memblock_is_region_reserved(elfcorehdr_addr, elfcorehdr_size)) {
> > + pr_warn("elfcorehdr is overlapped\n");
> > + return;
> > + }
> > +
> > + memblock_reserve(elfcorehdr_addr, elfcorehdr_size);
> > +
> > + pr_info("Reserving %lldKB of memory at 0x%llx for elfcorehdr\n",
> > + elfcorehdr_size >> 10, elfcorehdr_addr);
> > +}
>
> This doesn't seem right to me. The logic here doesn't match the commit
> message, the comment above reserve_elfcorehdr() doesn't match the
> implementation, and this doesn't match my understanding of how this was
> intended to be used from the DT binding.
Surely the commit message was wrong/misleading; It should say
===8<===
Arch-specific functions are added to allow for implementing a crash dump
file interface, /proc/vmcore, which can be viewed as a ELF file.
A user space tool, like kexec-tools, is responsible for allocating
a separate region for the core's ELF header within crash kdump kernel
memory and filling it in when executing kexec_load().
Then, its location will be advertised to crash dump kernel via a new
device-tree property, "linux,elfcorehdr", and crash dump kernel preserves
the region for later use with reserve_elfcorehdr()@boot time.
On crash dump kernel, /proc/vmcore will access the primary kernel's memory
with copy_oldmem_page(), which feeds the data page-by-page by ioremap'ing
it since it does not reside in linear mapping on crash dump kernel.
Meanwhile, elfcorehdr_read() is simple as the region is always mapped.
===>8===
Does this make things clear?
> I had assumed that we'd treat this in much the same way as the
> linux,reserved-memory-region property, with the primary kernel either
> dynamically allocating the region or using a command line option, and
> the base being exposed to userspace via /sys/ or /proc/ somehow.
I didn't get the point here, but please note that the data in ELF core header
is produced by kexec-tools (who knows its location, too), and consumed solely
by the crash dump kernel.
Thanks,
-Takahiro AKASHI
> Why is that not the case?
>
> Thanks,
> Mark.
next prev parent reply other threads:[~2017-02-02 6:24 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-01 12:42 [PATCH v31 00/12] add kdump support AKASHI Takahiro
2017-02-01 12:42 ` AKASHI Takahiro
2017-02-01 12:45 ` [PATCH v31 01/12] memblock: add memblock_cap_memory_range() AKASHI Takahiro
2017-02-01 12:45 ` AKASHI Takahiro
2017-02-01 12:45 ` AKASHI Takahiro
2017-02-01 12:46 ` [PATCH v31 02/12] arm64: limit memory regions based on DT property, usable-memory-range AKASHI Takahiro
2017-02-01 12:46 ` AKASHI Takahiro
2017-02-01 15:07 ` Mark Rutland
2017-02-01 15:07 ` Mark Rutland
2017-02-02 4:21 ` AKASHI Takahiro
2017-02-02 4:21 ` AKASHI Takahiro
2017-02-01 12:46 ` [PATCH v31 03/12] arm64: kdump: reserve memory for crash dump kernel AKASHI Takahiro
2017-02-01 12:46 ` AKASHI Takahiro
2017-02-01 15:26 ` Mark Rutland
2017-02-01 15:26 ` Mark Rutland
2017-02-02 4:52 ` AKASHI Takahiro
2017-02-02 4:52 ` AKASHI Takahiro
2017-02-02 11:26 ` Mark Rutland
2017-02-02 11:26 ` Mark Rutland
2017-02-02 13:44 ` AKASHI Takahiro
2017-02-02 13:44 ` AKASHI Takahiro
2017-02-01 12:46 ` [PATCH v31 04/12] arm64: mm: allow for unmapping part of kernel mapping AKASHI Takahiro
2017-02-01 12:46 ` AKASHI Takahiro
2017-02-01 16:03 ` Mark Rutland
2017-02-01 16:03 ` Mark Rutland
2017-02-02 10:21 ` AKASHI Takahiro
2017-02-02 10:21 ` AKASHI Takahiro
2017-02-02 11:44 ` Mark Rutland
2017-02-02 11:44 ` Mark Rutland
2017-02-02 14:01 ` AKASHI Takahiro
2017-02-02 14:01 ` AKASHI Takahiro
2017-02-02 14:35 ` Mark Rutland
2017-02-02 14:35 ` Mark Rutland
2017-02-02 14:55 ` AKASHI Takahiro
2017-02-02 14:55 ` AKASHI Takahiro
2017-02-03 6:13 ` AKASHI Takahiro
2017-02-03 6:13 ` AKASHI Takahiro
2017-02-03 14:22 ` Mark Rutland
2017-02-03 14:22 ` Mark Rutland
2017-02-01 12:46 ` [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory AKASHI Takahiro
2017-02-01 12:46 ` AKASHI Takahiro
2017-02-01 18:00 ` Mark Rutland
2017-02-01 18:00 ` Mark Rutland
2017-02-01 18:25 ` Mark Rutland
2017-02-01 18:25 ` Mark Rutland
2017-02-02 10:39 ` AKASHI Takahiro
2017-02-02 10:39 ` AKASHI Takahiro
2017-02-02 11:54 ` Mark Rutland
2017-02-02 11:54 ` Mark Rutland
2017-02-03 1:45 ` AKASHI Takahiro
2017-02-03 1:45 ` AKASHI Takahiro
2017-02-03 11:51 ` Mark Rutland
2017-02-03 11:51 ` Mark Rutland
2017-02-02 10:45 ` James Morse
2017-02-02 10:45 ` James Morse
2017-02-02 11:19 ` AKASHI Takahiro
2017-02-02 11:19 ` AKASHI Takahiro
2017-02-02 11:48 ` Mark Rutland
2017-02-02 11:48 ` Mark Rutland
2017-02-02 10:31 ` AKASHI Takahiro
2017-02-02 10:31 ` AKASHI Takahiro
2017-02-02 11:16 ` Mark Rutland
2017-02-02 11:16 ` Mark Rutland
2017-02-02 14:36 ` AKASHI Takahiro
2017-02-02 14:36 ` AKASHI Takahiro
2017-02-02 15:36 ` Mark Rutland
2017-02-02 15:36 ` Mark Rutland
2017-02-01 12:46 ` [PATCH v31 06/12] arm64: hibernate: preserve kdump image around hibernation AKASHI Takahiro
2017-02-01 12:46 ` AKASHI Takahiro
2017-02-01 12:46 ` [PATCH v31 07/12] arm64: kdump: implement machine_crash_shutdown() AKASHI Takahiro
2017-02-01 12:46 ` AKASHI Takahiro
2017-02-01 12:46 ` [PATCH v31 08/12] arm64: kdump: add VMCOREINFO's for user-space tools AKASHI Takahiro
2017-02-01 12:46 ` AKASHI Takahiro
2017-02-01 12:46 ` [PATCH v31 09/12] arm64: kdump: provide /proc/vmcore file AKASHI Takahiro
2017-02-01 12:46 ` AKASHI Takahiro
2017-02-01 19:21 ` Mark Rutland
2017-02-01 19:21 ` Mark Rutland
2017-02-02 6:24 ` AKASHI Takahiro [this message]
2017-02-02 6:24 ` AKASHI Takahiro
2017-02-02 12:03 ` Mark Rutland
2017-02-02 12:03 ` Mark Rutland
2017-02-02 12:08 ` Mark Rutland
2017-02-02 12:08 ` Mark Rutland
2017-02-02 14:39 ` AKASHI Takahiro
2017-02-02 14:39 ` AKASHI Takahiro
2017-02-01 12:46 ` [PATCH v31 10/12] arm64: kdump: enable kdump in defconfig AKASHI Takahiro
2017-02-01 12:46 ` AKASHI Takahiro
2017-02-01 12:46 ` [PATCH v31 11/12] Documentation: kdump: describe arm64 port AKASHI Takahiro
2017-02-01 12:46 ` AKASHI Takahiro
2017-02-01 12:48 ` [PATCH v31 12/12] Documentation: dt: chosen properties for arm64 kdump AKASHI Takahiro
2017-02-01 12:48 ` AKASHI Takahiro
2017-02-01 12:48 ` AKASHI Takahiro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170202062408.GC13549@linaro.org \
--to=takahiro.akashi@linaro.org \
--cc=bauerman@linux.vnet.ibm.com \
--cc=catalin.marinas@arm.com \
--cc=dyoung@redhat.com \
--cc=geoff@infradead.org \
--cc=james.morse@arm.com \
--cc=kexec@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.