[PATCH v3 03/25] dt-bindings: timer: Document Owl timer

[mark.rutland@arm.com (Mark Rutland)]

On Tue, Feb 28, 2017 at 07:35:13AM +0100, Andreas F?rber wrote:
> The Actions Semi S500 SoC contains a timer block with two 2 Hz and two
> 32-bit timers. The S900 SoC timer block has four 32-bit timers.
> 
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> ---
>  v2 -> v3:
>  * Adopted interrupt-names
>  * Changed compatible for S500
>  * Added S900 compatible and interrupt names
>  
>  v2: new
>  
>  .../devicetree/bindings/timer/actions,owl-timer.txt  | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/actions,owl-timer.txt
> 
> diff --git a/Documentation/devicetree/bindings/timer/actions,owl-timer.txt b/Documentation/devicetree/bindings/timer/actions,owl-timer.txt
> new file mode 100644
> index 0000000..5b4834d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/actions,owl-timer.txt
> @@ -0,0 +1,20 @@
> +Actions Semi Owl Timer
> +
> +Required properties:
> +- compatible      :  "actions,s500-timer" for S500
> +                     "actions,s900-timer" for S900
> +- reg             :  Offset and length of the register set for the device.
> +- interrupts      :  Should contain the interrupts.
> +- interrupt-names :  Valid names are: "2Hz0", "2Hz1",
> +                                      "Timer0", "Timer1", "Timer2", "Timer3"

Sticking to lower case for the names would be preferable.

Otherwise, this looks fine.

Mark,.