From: opendmb@gmail.com (Doug Berger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/8] bus: brcmstb_gisb: Add ARM64 support
Date: Tue, 28 Mar 2017 14:34:29 -0700 [thread overview]
Message-ID: <20170328213431.10904-7-opendmb@gmail.com> (raw)
In-Reply-To: <20170328213431.10904-1-opendmb@gmail.com>
From: Florian Fainelli <f.fainelli@gmail.com>
Hook to the ARM64 data abort exception #16: synchronous external
abort, which is how the GISB errors will be funneled back to the
ARM64 CPU in case of problems
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/bus/Kconfig | 2 +-
drivers/bus/brcmstb_gisb.c | 15 ++++++++++++---
2 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 0a52da439abf..d2a5f1184022 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -57,7 +57,7 @@ config ARM_CCN
config BRCMSTB_GISB_ARB
bool "Broadcom STB GISB bus arbiter"
- depends on ARM || MIPS
+ depends on ARM || ARM64 || MIPS
default ARCH_BRCMSTB || BMIPS_GENERIC
help
Driver for the Broadcom Set Top Box System-on-a-chip internal bus
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index edf79432f899..500b6bb5c739 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -30,6 +30,11 @@
#include <asm/signal.h>
#endif
+#ifdef CONFIG_ARM64
+#include <asm/signal.h>
+#include <asm/system_misc.h>
+#endif
+
#ifdef CONFIG_MIPS
#include <asm/traps.h>
#endif
@@ -225,7 +230,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
return 0;
}
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
@@ -235,7 +240,7 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
brcmstb_gisb_arb_decode_addr(gdev, "bus error");
-#if !defined(CONFIG_ARM_LPAE)
+#if defined(CONFIG_ARM) && !defined(CONFIG_ARM_LPAE)
/*
* If it was an imprecise abort, then we need to correct the
* return address to be _after_ the instruction.
@@ -247,7 +252,7 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
/* Always report unhandled exception */
return 1;
}
-#endif
+#endif /* CONFIG_ARM || CONFIG_ARM64 */
#ifdef CONFIG_MIPS
static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup)
@@ -395,6 +400,10 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
"imprecise external abort");
#endif
#endif /* CONFIG_ARM */
+#ifdef CONFIG_ARM64
+ hook_fault_code(16, brcmstb_bus_error_handler, SIGBUS, 0,
+ "synchronous external abort");
+#endif
#ifdef CONFIG_MIPS
board_be_handler = brcmstb_bus_error_handler;
#endif
--
2.12.0
WARNING: multiple messages have this Message-ID (diff)
From: Doug Berger <opendmb@gmail.com>
To: mark.rutland@arm.com
Cc: robh+dt@kernel.org, catalin.marinas@arm.com, will.deacon@arm.com,
computersforpeace@gmail.com, gregory.0xf0@gmail.com,
f.fainelli@gmail.com, bcm-kernel-feedback-list@broadcom.com,
opendmb@gmail.com, wangkefeng.wang@huawei.com,
james.morse@arm.com, mingo@kernel.org,
sandeepa.s.prabhu@gmail.com, shijie.huang@arm.com,
linus.walleij@linaro.org, treding@nvidia.com,
jonathanh@nvidia.com, olof@lixom.net, mirza.krak@gmail.com,
suzuki.poulose@arm.com, bgolaszewski@baylibre.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/8] bus: brcmstb_gisb: Add ARM64 support
Date: Tue, 28 Mar 2017 14:34:29 -0700 [thread overview]
Message-ID: <20170328213431.10904-7-opendmb@gmail.com> (raw)
In-Reply-To: <20170328213431.10904-1-opendmb@gmail.com>
From: Florian Fainelli <f.fainelli@gmail.com>
Hook to the ARM64 data abort exception #16: synchronous external
abort, which is how the GISB errors will be funneled back to the
ARM64 CPU in case of problems
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/bus/Kconfig | 2 +-
drivers/bus/brcmstb_gisb.c | 15 ++++++++++++---
2 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 0a52da439abf..d2a5f1184022 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -57,7 +57,7 @@ config ARM_CCN
config BRCMSTB_GISB_ARB
bool "Broadcom STB GISB bus arbiter"
- depends on ARM || MIPS
+ depends on ARM || ARM64 || MIPS
default ARCH_BRCMSTB || BMIPS_GENERIC
help
Driver for the Broadcom Set Top Box System-on-a-chip internal bus
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index edf79432f899..500b6bb5c739 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -30,6 +30,11 @@
#include <asm/signal.h>
#endif
+#ifdef CONFIG_ARM64
+#include <asm/signal.h>
+#include <asm/system_misc.h>
+#endif
+
#ifdef CONFIG_MIPS
#include <asm/traps.h>
#endif
@@ -225,7 +230,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
return 0;
}
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
@@ -235,7 +240,7 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
brcmstb_gisb_arb_decode_addr(gdev, "bus error");
-#if !defined(CONFIG_ARM_LPAE)
+#if defined(CONFIG_ARM) && !defined(CONFIG_ARM_LPAE)
/*
* If it was an imprecise abort, then we need to correct the
* return address to be _after_ the instruction.
@@ -247,7 +252,7 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
/* Always report unhandled exception */
return 1;
}
-#endif
+#endif /* CONFIG_ARM || CONFIG_ARM64 */
#ifdef CONFIG_MIPS
static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup)
@@ -395,6 +400,10 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
"imprecise external abort");
#endif
#endif /* CONFIG_ARM */
+#ifdef CONFIG_ARM64
+ hook_fault_code(16, brcmstb_bus_error_handler, SIGBUS, 0,
+ "synchronous external abort");
+#endif
#ifdef CONFIG_MIPS
board_be_handler = brcmstb_bus_error_handler;
#endif
--
2.12.0
next prev parent reply other threads:[~2017-03-28 21:34 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-28 21:34 [PATCH v2 0/8] bus: brcmstb_gisb: add support for GISBv7 arbiter Doug Berger
2017-03-28 21:34 ` Doug Berger
2017-03-28 21:34 ` Doug Berger
2017-03-28 21:34 ` [PATCH v2 1/8] arm64: mm: Allow installation of memory abort handlers Doug Berger
2017-03-28 21:34 ` Doug Berger
2017-03-29 11:32 ` Mark Rutland
2017-03-29 11:32 ` Mark Rutland
2017-03-28 21:34 ` [PATCH v2 2/8] arm64: mm: mark fault_info __ro_after_init Doug Berger
2017-03-28 21:34 ` Doug Berger
2017-03-29 11:23 ` Mark Rutland
2017-03-29 11:23 ` Mark Rutland
2017-03-29 11:23 ` Mark Rutland
2017-03-28 21:34 ` [PATCH v2 3/8] bus: brcmstb_gisb: Use register offsets with writes too Doug Berger
2017-03-28 21:34 ` Doug Berger
2017-03-28 21:34 ` [PATCH v2 4/8] bus: brcmstb_gisb: Correct hooking of ARM aborts Doug Berger
2017-03-28 21:34 ` Doug Berger
2017-03-28 21:34 ` Doug Berger
2017-03-28 21:34 ` [PATCH v2 5/8] bus: brcmstb_gisb: correct support for 64-bit address output Doug Berger
2017-03-28 21:34 ` Doug Berger
2017-03-28 21:34 ` Doug Berger
2017-03-28 21:34 ` Doug Berger [this message]
2017-03-28 21:34 ` [PATCH v2 6/8] bus: brcmstb_gisb: Add ARM64 support Doug Berger
2017-03-29 11:20 ` Mark Rutland
2017-03-29 11:20 ` Mark Rutland
2017-03-29 11:20 ` Mark Rutland
2017-03-28 21:34 ` [PATCH v2 7/8] bus: brcmstb_gisb: add notifier handling Doug Berger
2017-03-28 21:34 ` Doug Berger
2017-03-28 21:34 ` Doug Berger
2017-03-29 10:13 ` Mark Rutland
2017-03-29 10:13 ` Mark Rutland
2017-03-29 10:13 ` Mark Rutland
2017-03-29 17:39 ` Doug Berger
2017-03-29 17:39 ` Doug Berger
2017-03-29 17:39 ` Doug Berger
2017-03-29 18:17 ` Mark Rutland
2017-03-29 18:17 ` Mark Rutland
2017-03-28 21:34 ` [PATCH v2 8/8] bus: brcmstb_gisb: update to support new revision Doug Berger
2017-03-28 21:34 ` Doug Berger
2017-03-29 11:25 ` Mark Rutland
2017-03-29 11:25 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170328213431.10904-7-opendmb@gmail.com \
--to=opendmb@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.