* [PATCH 0/3] introduce QorIQ DPAA 1.x QBMan device tree nodes @ 2017-03-30 14:37 ` Madalin Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin Bucur @ 2017-03-30 14:37 UTC (permalink / raw) To: linux-arm-kernel This patch set introduces the QorIQ Data Path Acceleration Arhitecture (DPAA) Queue Manager and Buffer Manager device tree nodes for the ARM based DPAA 1.x platforms. Madalin Bucur (3): dts: arm64: add DPAA QBMan portals dts: arm64: add LS1043A DPAA QBMan nodes dts: arm64: add LS1046A DPAA QBMan nodes arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 52 +++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 52 +++++++++++++++ .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 +++++++++++++++++++ .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 ++++++++++++++++++++++ 4 files changed, 247 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi -- 2.1.0 ^ permalink raw reply [flat|nested] 29+ messages in thread
* [PATCH 0/3] introduce QorIQ DPAA 1.x QBMan device tree nodes @ 2017-03-30 14:37 ` Madalin Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin Bucur @ 2017-03-30 14:37 UTC (permalink / raw) To: robh+dt, mark.rutland, devicetree Cc: linux-arm-kernel, linux-kernel, catalin.marinas, will.deacon, shawnguo, Gang.Liu, Madalin Bucur This patch set introduces the QorIQ Data Path Acceleration Arhitecture (DPAA) Queue Manager and Buffer Manager device tree nodes for the ARM based DPAA 1.x platforms. Madalin Bucur (3): dts: arm64: add DPAA QBMan portals dts: arm64: add LS1043A DPAA QBMan nodes dts: arm64: add LS1046A DPAA QBMan nodes arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 52 +++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 52 +++++++++++++++ .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 +++++++++++++++++++ .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 ++++++++++++++++++++++ 4 files changed, 247 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi -- 2.1.0 ^ permalink raw reply [flat|nested] 29+ messages in thread
* [PATCH 0/3] introduce QorIQ DPAA 1.x QBMan device tree nodes @ 2017-03-30 14:37 ` Madalin Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin Bucur @ 2017-03-30 14:37 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, catalin.marinas-5wv7dgnIgG8, will.deacon-5wv7dgnIgG8, shawnguo-DgEjT+Ai2ygdnm+yROfE0A, Gang.Liu-3arQi8VN3Tc, Madalin Bucur This patch set introduces the QorIQ Data Path Acceleration Arhitecture (DPAA) Queue Manager and Buffer Manager device tree nodes for the ARM based DPAA 1.x platforms. Madalin Bucur (3): dts: arm64: add DPAA QBMan portals dts: arm64: add LS1043A DPAA QBMan nodes dts: arm64: add LS1046A DPAA QBMan nodes arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 52 +++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 52 +++++++++++++++ .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 +++++++++++++++++++ .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 ++++++++++++++++++++++ 4 files changed, 247 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 29+ messages in thread
* [PATCH 1/3] dts: arm64: add DPAA QBMan portals 2017-03-30 14:37 ` Madalin Bucur (?) @ 2017-03-30 14:37 ` Madalin Bucur -1 siblings, 0 replies; 29+ messages in thread From: Madalin Bucur @ 2017-03-30 14:37 UTC (permalink / raw) To: linux-arm-kernel Add the DPAA 1.x DPAA QMan and BMan portal nodes. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> --- .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 +++++++++++++++++++ .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 ++++++++++++++++++++++ 2 files changed, 143 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi new file mode 100644 index 0000000..b007344 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi @@ -0,0 +1,67 @@ +/* + * QorIQ BMan Portals device tree + * + * Copyright 2011-2016 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +&bportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + bman-portal at 0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000 0x4000000 0x4000>; + interrupts = <0 173 0x4>; + }; + + bman-portal at 10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000 0x4010000 0x4000>; + interrupts = <0 175 0x4>; + }; + + bman-portal at 20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000 0x4020000 0x4000>; + interrupts = <0 177 0x4>; + }; + + bman-portal at 30000 { + compatible = "fsl,bman-portal"; + reg = <0x30000 0x4000 0x4030000 0x4000>; + interrupts = <0 179 0x4>; + }; + + bman-portal at 40000 { + compatible = "fsl,bman-portal"; + reg = <0x40000 0x4000 0x4040000 0x4000>; + interrupts = <0 181 0x4>; + }; + + bman-portal at 50000 { + compatible = "fsl,bman-portal"; + reg = <0x50000 0x4000 0x4050000 0x4000>; + interrupts = <0 183 0x4>; + }; + + bman-portal at 60000 { + compatible = "fsl,bman-portal"; + reg = <0x60000 0x4000 0x4060000 0x4000>; + interrupts = <0 185 0x4>; + }; + + bman-portal at 70000 { + compatible = "fsl,bman-portal"; + reg = <0x70000 0x4000 0x4070000 0x4000>; + interrupts = <0 187 0x4>; + }; + + bman-portal at 80000 { + compatible = "fsl,bman-portal"; + reg = <0x80000 0x4000 0x4080000 0x4000>; + interrupts = <0 189 0x4>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi new file mode 100644 index 0000000..4baec2c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi @@ -0,0 +1,76 @@ +/* + * QorIQ QMan Portals device tree + * + * Copyright 2011-2016 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +&qportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + qportal0: qman-portal at 0 { + compatible = "fsl,qman-portal"; + reg = <0x0 0x4000 0x4000000 0x4000>; + interrupts = <0 172 0x4>; + cell-index = <0>; + }; + + qportal1: qman-portal at 10000 { + compatible = "fsl,qman-portal"; + reg = <0x10000 0x4000 0x4010000 0x4000>; + interrupts = <0 174 0x4>; + cell-index = <1>; + }; + + qportal2: qman-portal at 20000 { + compatible = "fsl,qman-portal"; + reg = <0x20000 0x4000 0x4020000 0x4000>; + interrupts = <0 176 0x4>; + cell-index = <2>; + }; + + qportal3: qman-portal at 30000 { + compatible = "fsl,qman-portal"; + reg = <0x30000 0x4000 0x4030000 0x4000>; + interrupts = <0 178 0x4>; + cell-index = <3>; + }; + + qportal4: qman-portal at 40000 { + compatible = "fsl,qman-portal"; + reg = <0x40000 0x4000 0x4040000 0x4000>; + interrupts = <0 180 0x4>; + cell-index = <4>; + }; + + qportal5: qman-portal at 50000 { + compatible = "fsl,qman-portal"; + reg = <0x50000 0x4000 0x4050000 0x4000>; + interrupts = <0 182 0x4>; + cell-index = <5>; + }; + + qportal6: qman-portal at 60000 { + compatible = "fsl,qman-portal"; + reg = <0x60000 0x4000 0x4060000 0x4000>; + interrupts = <0 184 0x4>; + cell-index = <6>; + }; + + qportal7: qman-portal at 70000 { + compatible = "fsl,qman-portal"; + reg = <0x70000 0x4000 0x4070000 0x4000>; + interrupts = <0 186 0x4>; + cell-index = <7>; + }; + + qportal8: qman-portal at 80000 { + compatible = "fsl,qman-portal"; + reg = <0x80000 0x4000 0x4080000 0x4000>; + interrupts = <0 188 0x4>; + cell-index = <8>; + }; +}; -- 2.1.0 ^ permalink raw reply related [flat|nested] 29+ messages in thread
* [PATCH 1/3] dts: arm64: add DPAA QBMan portals @ 2017-03-30 14:37 ` Madalin Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin Bucur @ 2017-03-30 14:37 UTC (permalink / raw) To: robh+dt, mark.rutland, devicetree Cc: linux-arm-kernel, linux-kernel, catalin.marinas, will.deacon, shawnguo, Gang.Liu, Madalin Bucur, Roy Pledge Add the DPAA 1.x DPAA QMan and BMan portal nodes. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> --- .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 +++++++++++++++++++ .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 ++++++++++++++++++++++ 2 files changed, 143 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi new file mode 100644 index 0000000..b007344 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi @@ -0,0 +1,67 @@ +/* + * QorIQ BMan Portals device tree + * + * Copyright 2011-2016 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +&bportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000 0x4000000 0x4000>; + interrupts = <0 173 0x4>; + }; + + bman-portal@10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000 0x4010000 0x4000>; + interrupts = <0 175 0x4>; + }; + + bman-portal@20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000 0x4020000 0x4000>; + interrupts = <0 177 0x4>; + }; + + bman-portal@30000 { + compatible = "fsl,bman-portal"; + reg = <0x30000 0x4000 0x4030000 0x4000>; + interrupts = <0 179 0x4>; + }; + + bman-portal@40000 { + compatible = "fsl,bman-portal"; + reg = <0x40000 0x4000 0x4040000 0x4000>; + interrupts = <0 181 0x4>; + }; + + bman-portal@50000 { + compatible = "fsl,bman-portal"; + reg = <0x50000 0x4000 0x4050000 0x4000>; + interrupts = <0 183 0x4>; + }; + + bman-portal@60000 { + compatible = "fsl,bman-portal"; + reg = <0x60000 0x4000 0x4060000 0x4000>; + interrupts = <0 185 0x4>; + }; + + bman-portal@70000 { + compatible = "fsl,bman-portal"; + reg = <0x70000 0x4000 0x4070000 0x4000>; + interrupts = <0 187 0x4>; + }; + + bman-portal@80000 { + compatible = "fsl,bman-portal"; + reg = <0x80000 0x4000 0x4080000 0x4000>; + interrupts = <0 189 0x4>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi new file mode 100644 index 0000000..4baec2c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi @@ -0,0 +1,76 @@ +/* + * QorIQ QMan Portals device tree + * + * Copyright 2011-2016 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +&qportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + qportal0: qman-portal@0 { + compatible = "fsl,qman-portal"; + reg = <0x0 0x4000 0x4000000 0x4000>; + interrupts = <0 172 0x4>; + cell-index = <0>; + }; + + qportal1: qman-portal@10000 { + compatible = "fsl,qman-portal"; + reg = <0x10000 0x4000 0x4010000 0x4000>; + interrupts = <0 174 0x4>; + cell-index = <1>; + }; + + qportal2: qman-portal@20000 { + compatible = "fsl,qman-portal"; + reg = <0x20000 0x4000 0x4020000 0x4000>; + interrupts = <0 176 0x4>; + cell-index = <2>; + }; + + qportal3: qman-portal@30000 { + compatible = "fsl,qman-portal"; + reg = <0x30000 0x4000 0x4030000 0x4000>; + interrupts = <0 178 0x4>; + cell-index = <3>; + }; + + qportal4: qman-portal@40000 { + compatible = "fsl,qman-portal"; + reg = <0x40000 0x4000 0x4040000 0x4000>; + interrupts = <0 180 0x4>; + cell-index = <4>; + }; + + qportal5: qman-portal@50000 { + compatible = "fsl,qman-portal"; + reg = <0x50000 0x4000 0x4050000 0x4000>; + interrupts = <0 182 0x4>; + cell-index = <5>; + }; + + qportal6: qman-portal@60000 { + compatible = "fsl,qman-portal"; + reg = <0x60000 0x4000 0x4060000 0x4000>; + interrupts = <0 184 0x4>; + cell-index = <6>; + }; + + qportal7: qman-portal@70000 { + compatible = "fsl,qman-portal"; + reg = <0x70000 0x4000 0x4070000 0x4000>; + interrupts = <0 186 0x4>; + cell-index = <7>; + }; + + qportal8: qman-portal@80000 { + compatible = "fsl,qman-portal"; + reg = <0x80000 0x4000 0x4080000 0x4000>; + interrupts = <0 188 0x4>; + cell-index = <8>; + }; +}; -- 2.1.0 ^ permalink raw reply related [flat|nested] 29+ messages in thread
* [PATCH 1/3] dts: arm64: add DPAA QBMan portals @ 2017-03-30 14:37 ` Madalin Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin Bucur @ 2017-03-30 14:37 UTC (permalink / raw) To: robh+dt, mark.rutland, devicetree Cc: linux-arm-kernel, linux-kernel, catalin.marinas, will.deacon, shawnguo, Gang.Liu, Madalin Bucur, Roy Pledge Add the DPAA 1.x DPAA QMan and BMan portal nodes. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> --- .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 +++++++++++++++++++ .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 ++++++++++++++++++++++ 2 files changed, 143 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi new file mode 100644 index 0000000..b007344 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi @@ -0,0 +1,67 @@ +/* + * QorIQ BMan Portals device tree + * + * Copyright 2011-2016 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +&bportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000 0x4000000 0x4000>; + interrupts = <0 173 0x4>; + }; + + bman-portal@10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000 0x4010000 0x4000>; + interrupts = <0 175 0x4>; + }; + + bman-portal@20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000 0x4020000 0x4000>; + interrupts = <0 177 0x4>; + }; + + bman-portal@30000 { + compatible = "fsl,bman-portal"; + reg = <0x30000 0x4000 0x4030000 0x4000>; + interrupts = <0 179 0x4>; + }; + + bman-portal@40000 { + compatible = "fsl,bman-portal"; + reg = <0x40000 0x4000 0x4040000 0x4000>; + interrupts = <0 181 0x4>; + }; + + bman-portal@50000 { + compatible = "fsl,bman-portal"; + reg = <0x50000 0x4000 0x4050000 0x4000>; + interrupts = <0 183 0x4>; + }; + + bman-portal@60000 { + compatible = "fsl,bman-portal"; + reg = <0x60000 0x4000 0x4060000 0x4000>; + interrupts = <0 185 0x4>; + }; + + bman-portal@70000 { + compatible = "fsl,bman-portal"; + reg = <0x70000 0x4000 0x4070000 0x4000>; + interrupts = <0 187 0x4>; + }; + + bman-portal@80000 { + compatible = "fsl,bman-portal"; + reg = <0x80000 0x4000 0x4080000 0x4000>; + interrupts = <0 189 0x4>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi new file mode 100644 index 0000000..4baec2c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi @@ -0,0 +1,76 @@ +/* + * QorIQ QMan Portals device tree + * + * Copyright 2011-2016 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +&qportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + qportal0: qman-portal@0 { + compatible = "fsl,qman-portal"; + reg = <0x0 0x4000 0x4000000 0x4000>; + interrupts = <0 172 0x4>; + cell-index = <0>; + }; + + qportal1: qman-portal@10000 { + compatible = "fsl,qman-portal"; + reg = <0x10000 0x4000 0x4010000 0x4000>; + interrupts = <0 174 0x4>; + cell-index = <1>; + }; + + qportal2: qman-portal@20000 { + compatible = "fsl,qman-portal"; + reg = <0x20000 0x4000 0x4020000 0x4000>; + interrupts = <0 176 0x4>; + cell-index = <2>; + }; + + qportal3: qman-portal@30000 { + compatible = "fsl,qman-portal"; + reg = <0x30000 0x4000 0x4030000 0x4000>; + interrupts = <0 178 0x4>; + cell-index = <3>; + }; + + qportal4: qman-portal@40000 { + compatible = "fsl,qman-portal"; + reg = <0x40000 0x4000 0x4040000 0x4000>; + interrupts = <0 180 0x4>; + cell-index = <4>; + }; + + qportal5: qman-portal@50000 { + compatible = "fsl,qman-portal"; + reg = <0x50000 0x4000 0x4050000 0x4000>; + interrupts = <0 182 0x4>; + cell-index = <5>; + }; + + qportal6: qman-portal@60000 { + compatible = "fsl,qman-portal"; + reg = <0x60000 0x4000 0x4060000 0x4000>; + interrupts = <0 184 0x4>; + cell-index = <6>; + }; + + qportal7: qman-portal@70000 { + compatible = "fsl,qman-portal"; + reg = <0x70000 0x4000 0x4070000 0x4000>; + interrupts = <0 186 0x4>; + cell-index = <7>; + }; + + qportal8: qman-portal@80000 { + compatible = "fsl,qman-portal"; + reg = <0x80000 0x4000 0x4080000 0x4000>; + interrupts = <0 188 0x4>; + cell-index = <8>; + }; +}; -- 2.1.0 ^ permalink raw reply related [flat|nested] 29+ messages in thread
* [PATCH 1/3] dts: arm64: add DPAA QBMan portals @ 2017-03-31 1:49 ` Shawn Guo 0 siblings, 0 replies; 29+ messages in thread From: Shawn Guo @ 2017-03-31 1:49 UTC (permalink / raw) To: linux-arm-kernel On Thu, Mar 30, 2017 at 05:37:50PM +0300, Madalin Bucur wrote: > Add the DPAA 1.x DPAA QMan and BMan portal nodes. > > Signed-off-by: Roy Pledge <roy.pledge@nxp.com> > Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> The patches should be prefixed like 'arm64: dts: ...'. > --- > .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 +++++++++++++++++++ > .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 ++++++++++++++++++++++ > 2 files changed, 143 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi What does the suffix number '1' mean here? > > diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > new file mode 100644 > index 0000000..b007344 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > @@ -0,0 +1,67 @@ > +/* > + * QorIQ BMan Portals device tree > + * > + * Copyright 2011-2016 Freescale Semiconductor Inc. > + * > + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > + */ > + > +&bportals { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + > + bman-portal at 0 { > + compatible = "fsl,bman-portal"; The bindings/soc/fsl/bman-portals.txt says: Must include "fsl,bman-portal-<hardware revision>". > + reg = <0x0 0x4000 0x4000000 0x4000>; Can we write it in the same way how the example in the bindings doc does? reg = <0x0 0x4000>, <0x4000000 0x4000>; It's more obvious to tell that it has two memory regions. > + interrupts = <0 173 0x4>; Can we use GIC_SPI and IRQ_TYPE_LEVEL_HIGH which are defined by headers in include/dt-bindings/interrupt-controller/ to make it more readable? Shawn > + }; > + > + bman-portal at 10000 { > + compatible = "fsl,bman-portal"; > + reg = <0x10000 0x4000 0x4010000 0x4000>; > + interrupts = <0 175 0x4>; > + }; > + > + bman-portal at 20000 { > + compatible = "fsl,bman-portal"; > + reg = <0x20000 0x4000 0x4020000 0x4000>; > + interrupts = <0 177 0x4>; > + }; > + > + bman-portal at 30000 { > + compatible = "fsl,bman-portal"; > + reg = <0x30000 0x4000 0x4030000 0x4000>; > + interrupts = <0 179 0x4>; > + }; > + > + bman-portal at 40000 { > + compatible = "fsl,bman-portal"; > + reg = <0x40000 0x4000 0x4040000 0x4000>; > + interrupts = <0 181 0x4>; > + }; > + > + bman-portal at 50000 { > + compatible = "fsl,bman-portal"; > + reg = <0x50000 0x4000 0x4050000 0x4000>; > + interrupts = <0 183 0x4>; > + }; > + > + bman-portal at 60000 { > + compatible = "fsl,bman-portal"; > + reg = <0x60000 0x4000 0x4060000 0x4000>; > + interrupts = <0 185 0x4>; > + }; > + > + bman-portal at 70000 { > + compatible = "fsl,bman-portal"; > + reg = <0x70000 0x4000 0x4070000 0x4000>; > + interrupts = <0 187 0x4>; > + }; > + > + bman-portal at 80000 { > + compatible = "fsl,bman-portal"; > + reg = <0x80000 0x4000 0x4080000 0x4000>; > + interrupts = <0 189 0x4>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi > new file mode 100644 > index 0000000..4baec2c > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi > @@ -0,0 +1,76 @@ > +/* > + * QorIQ QMan Portals device tree > + * > + * Copyright 2011-2016 Freescale Semiconductor Inc. > + * > + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > + */ > + > +&qportals { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + > + qportal0: qman-portal at 0 { > + compatible = "fsl,qman-portal"; > + reg = <0x0 0x4000 0x4000000 0x4000>; > + interrupts = <0 172 0x4>; > + cell-index = <0>; > + }; > + > + qportal1: qman-portal at 10000 { > + compatible = "fsl,qman-portal"; > + reg = <0x10000 0x4000 0x4010000 0x4000>; > + interrupts = <0 174 0x4>; > + cell-index = <1>; > + }; > + > + qportal2: qman-portal at 20000 { > + compatible = "fsl,qman-portal"; > + reg = <0x20000 0x4000 0x4020000 0x4000>; > + interrupts = <0 176 0x4>; > + cell-index = <2>; > + }; > + > + qportal3: qman-portal at 30000 { > + compatible = "fsl,qman-portal"; > + reg = <0x30000 0x4000 0x4030000 0x4000>; > + interrupts = <0 178 0x4>; > + cell-index = <3>; > + }; > + > + qportal4: qman-portal at 40000 { > + compatible = "fsl,qman-portal"; > + reg = <0x40000 0x4000 0x4040000 0x4000>; > + interrupts = <0 180 0x4>; > + cell-index = <4>; > + }; > + > + qportal5: qman-portal at 50000 { > + compatible = "fsl,qman-portal"; > + reg = <0x50000 0x4000 0x4050000 0x4000>; > + interrupts = <0 182 0x4>; > + cell-index = <5>; > + }; > + > + qportal6: qman-portal at 60000 { > + compatible = "fsl,qman-portal"; > + reg = <0x60000 0x4000 0x4060000 0x4000>; > + interrupts = <0 184 0x4>; > + cell-index = <6>; > + }; > + > + qportal7: qman-portal at 70000 { > + compatible = "fsl,qman-portal"; > + reg = <0x70000 0x4000 0x4070000 0x4000>; > + interrupts = <0 186 0x4>; > + cell-index = <7>; > + }; > + > + qportal8: qman-portal at 80000 { > + compatible = "fsl,qman-portal"; > + reg = <0x80000 0x4000 0x4080000 0x4000>; > + interrupts = <0 188 0x4>; > + cell-index = <8>; > + }; > +}; > -- > 2.1.0 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH 1/3] dts: arm64: add DPAA QBMan portals @ 2017-03-31 1:49 ` Shawn Guo 0 siblings, 0 replies; 29+ messages in thread From: Shawn Guo @ 2017-03-31 1:49 UTC (permalink / raw) To: Madalin Bucur Cc: robh+dt, mark.rutland, devicetree, Gang.Liu, catalin.marinas, Roy Pledge, will.deacon, linux-kernel, linux-arm-kernel On Thu, Mar 30, 2017 at 05:37:50PM +0300, Madalin Bucur wrote: > Add the DPAA 1.x DPAA QMan and BMan portal nodes. > > Signed-off-by: Roy Pledge <roy.pledge@nxp.com> > Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> The patches should be prefixed like 'arm64: dts: ...'. > --- > .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 +++++++++++++++++++ > .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 ++++++++++++++++++++++ > 2 files changed, 143 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi What does the suffix number '1' mean here? > > diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > new file mode 100644 > index 0000000..b007344 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > @@ -0,0 +1,67 @@ > +/* > + * QorIQ BMan Portals device tree > + * > + * Copyright 2011-2016 Freescale Semiconductor Inc. > + * > + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > + */ > + > +&bportals { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + > + bman-portal@0 { > + compatible = "fsl,bman-portal"; The bindings/soc/fsl/bman-portals.txt says: Must include "fsl,bman-portal-<hardware revision>". > + reg = <0x0 0x4000 0x4000000 0x4000>; Can we write it in the same way how the example in the bindings doc does? reg = <0x0 0x4000>, <0x4000000 0x4000>; It's more obvious to tell that it has two memory regions. > + interrupts = <0 173 0x4>; Can we use GIC_SPI and IRQ_TYPE_LEVEL_HIGH which are defined by headers in include/dt-bindings/interrupt-controller/ to make it more readable? Shawn > + }; > + > + bman-portal@10000 { > + compatible = "fsl,bman-portal"; > + reg = <0x10000 0x4000 0x4010000 0x4000>; > + interrupts = <0 175 0x4>; > + }; > + > + bman-portal@20000 { > + compatible = "fsl,bman-portal"; > + reg = <0x20000 0x4000 0x4020000 0x4000>; > + interrupts = <0 177 0x4>; > + }; > + > + bman-portal@30000 { > + compatible = "fsl,bman-portal"; > + reg = <0x30000 0x4000 0x4030000 0x4000>; > + interrupts = <0 179 0x4>; > + }; > + > + bman-portal@40000 { > + compatible = "fsl,bman-portal"; > + reg = <0x40000 0x4000 0x4040000 0x4000>; > + interrupts = <0 181 0x4>; > + }; > + > + bman-portal@50000 { > + compatible = "fsl,bman-portal"; > + reg = <0x50000 0x4000 0x4050000 0x4000>; > + interrupts = <0 183 0x4>; > + }; > + > + bman-portal@60000 { > + compatible = "fsl,bman-portal"; > + reg = <0x60000 0x4000 0x4060000 0x4000>; > + interrupts = <0 185 0x4>; > + }; > + > + bman-portal@70000 { > + compatible = "fsl,bman-portal"; > + reg = <0x70000 0x4000 0x4070000 0x4000>; > + interrupts = <0 187 0x4>; > + }; > + > + bman-portal@80000 { > + compatible = "fsl,bman-portal"; > + reg = <0x80000 0x4000 0x4080000 0x4000>; > + interrupts = <0 189 0x4>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi > new file mode 100644 > index 0000000..4baec2c > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi > @@ -0,0 +1,76 @@ > +/* > + * QorIQ QMan Portals device tree > + * > + * Copyright 2011-2016 Freescale Semiconductor Inc. > + * > + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > + */ > + > +&qportals { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + > + qportal0: qman-portal@0 { > + compatible = "fsl,qman-portal"; > + reg = <0x0 0x4000 0x4000000 0x4000>; > + interrupts = <0 172 0x4>; > + cell-index = <0>; > + }; > + > + qportal1: qman-portal@10000 { > + compatible = "fsl,qman-portal"; > + reg = <0x10000 0x4000 0x4010000 0x4000>; > + interrupts = <0 174 0x4>; > + cell-index = <1>; > + }; > + > + qportal2: qman-portal@20000 { > + compatible = "fsl,qman-portal"; > + reg = <0x20000 0x4000 0x4020000 0x4000>; > + interrupts = <0 176 0x4>; > + cell-index = <2>; > + }; > + > + qportal3: qman-portal@30000 { > + compatible = "fsl,qman-portal"; > + reg = <0x30000 0x4000 0x4030000 0x4000>; > + interrupts = <0 178 0x4>; > + cell-index = <3>; > + }; > + > + qportal4: qman-portal@40000 { > + compatible = "fsl,qman-portal"; > + reg = <0x40000 0x4000 0x4040000 0x4000>; > + interrupts = <0 180 0x4>; > + cell-index = <4>; > + }; > + > + qportal5: qman-portal@50000 { > + compatible = "fsl,qman-portal"; > + reg = <0x50000 0x4000 0x4050000 0x4000>; > + interrupts = <0 182 0x4>; > + cell-index = <5>; > + }; > + > + qportal6: qman-portal@60000 { > + compatible = "fsl,qman-portal"; > + reg = <0x60000 0x4000 0x4060000 0x4000>; > + interrupts = <0 184 0x4>; > + cell-index = <6>; > + }; > + > + qportal7: qman-portal@70000 { > + compatible = "fsl,qman-portal"; > + reg = <0x70000 0x4000 0x4070000 0x4000>; > + interrupts = <0 186 0x4>; > + cell-index = <7>; > + }; > + > + qportal8: qman-portal@80000 { > + compatible = "fsl,qman-portal"; > + reg = <0x80000 0x4000 0x4080000 0x4000>; > + interrupts = <0 188 0x4>; > + cell-index = <8>; > + }; > +}; > -- > 2.1.0 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH 1/3] dts: arm64: add DPAA QBMan portals @ 2017-03-31 1:49 ` Shawn Guo 0 siblings, 0 replies; 29+ messages in thread From: Shawn Guo @ 2017-03-31 1:49 UTC (permalink / raw) To: Madalin Bucur Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA, Gang.Liu-3arQi8VN3Tc, catalin.marinas-5wv7dgnIgG8, Roy Pledge, will.deacon-5wv7dgnIgG8, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On Thu, Mar 30, 2017 at 05:37:50PM +0300, Madalin Bucur wrote: > Add the DPAA 1.x DPAA QMan and BMan portal nodes. > > Signed-off-by: Roy Pledge <roy.pledge-3arQi8VN3Tc@public.gmane.org> > Signed-off-by: Madalin Bucur <madalin.bucur-3arQi8VN3Tc@public.gmane.org> The patches should be prefixed like 'arm64: dts: ...'. > --- > .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 +++++++++++++++++++ > .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 ++++++++++++++++++++++ > 2 files changed, 143 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi What does the suffix number '1' mean here? > > diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > new file mode 100644 > index 0000000..b007344 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > @@ -0,0 +1,67 @@ > +/* > + * QorIQ BMan Portals device tree > + * > + * Copyright 2011-2016 Freescale Semiconductor Inc. > + * > + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > + */ > + > +&bportals { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + > + bman-portal@0 { > + compatible = "fsl,bman-portal"; The bindings/soc/fsl/bman-portals.txt says: Must include "fsl,bman-portal-<hardware revision>". > + reg = <0x0 0x4000 0x4000000 0x4000>; Can we write it in the same way how the example in the bindings doc does? reg = <0x0 0x4000>, <0x4000000 0x4000>; It's more obvious to tell that it has two memory regions. > + interrupts = <0 173 0x4>; Can we use GIC_SPI and IRQ_TYPE_LEVEL_HIGH which are defined by headers in include/dt-bindings/interrupt-controller/ to make it more readable? Shawn > + }; > + > + bman-portal@10000 { > + compatible = "fsl,bman-portal"; > + reg = <0x10000 0x4000 0x4010000 0x4000>; > + interrupts = <0 175 0x4>; > + }; > + > + bman-portal@20000 { > + compatible = "fsl,bman-portal"; > + reg = <0x20000 0x4000 0x4020000 0x4000>; > + interrupts = <0 177 0x4>; > + }; > + > + bman-portal@30000 { > + compatible = "fsl,bman-portal"; > + reg = <0x30000 0x4000 0x4030000 0x4000>; > + interrupts = <0 179 0x4>; > + }; > + > + bman-portal@40000 { > + compatible = "fsl,bman-portal"; > + reg = <0x40000 0x4000 0x4040000 0x4000>; > + interrupts = <0 181 0x4>; > + }; > + > + bman-portal@50000 { > + compatible = "fsl,bman-portal"; > + reg = <0x50000 0x4000 0x4050000 0x4000>; > + interrupts = <0 183 0x4>; > + }; > + > + bman-portal@60000 { > + compatible = "fsl,bman-portal"; > + reg = <0x60000 0x4000 0x4060000 0x4000>; > + interrupts = <0 185 0x4>; > + }; > + > + bman-portal@70000 { > + compatible = "fsl,bman-portal"; > + reg = <0x70000 0x4000 0x4070000 0x4000>; > + interrupts = <0 187 0x4>; > + }; > + > + bman-portal@80000 { > + compatible = "fsl,bman-portal"; > + reg = <0x80000 0x4000 0x4080000 0x4000>; > + interrupts = <0 189 0x4>; > + }; > +}; > diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi > new file mode 100644 > index 0000000..4baec2c > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi > @@ -0,0 +1,76 @@ > +/* > + * QorIQ QMan Portals device tree > + * > + * Copyright 2011-2016 Freescale Semiconductor Inc. > + * > + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > + */ > + > +&qportals { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + > + qportal0: qman-portal@0 { > + compatible = "fsl,qman-portal"; > + reg = <0x0 0x4000 0x4000000 0x4000>; > + interrupts = <0 172 0x4>; > + cell-index = <0>; > + }; > + > + qportal1: qman-portal@10000 { > + compatible = "fsl,qman-portal"; > + reg = <0x10000 0x4000 0x4010000 0x4000>; > + interrupts = <0 174 0x4>; > + cell-index = <1>; > + }; > + > + qportal2: qman-portal@20000 { > + compatible = "fsl,qman-portal"; > + reg = <0x20000 0x4000 0x4020000 0x4000>; > + interrupts = <0 176 0x4>; > + cell-index = <2>; > + }; > + > + qportal3: qman-portal@30000 { > + compatible = "fsl,qman-portal"; > + reg = <0x30000 0x4000 0x4030000 0x4000>; > + interrupts = <0 178 0x4>; > + cell-index = <3>; > + }; > + > + qportal4: qman-portal@40000 { > + compatible = "fsl,qman-portal"; > + reg = <0x40000 0x4000 0x4040000 0x4000>; > + interrupts = <0 180 0x4>; > + cell-index = <4>; > + }; > + > + qportal5: qman-portal@50000 { > + compatible = "fsl,qman-portal"; > + reg = <0x50000 0x4000 0x4050000 0x4000>; > + interrupts = <0 182 0x4>; > + cell-index = <5>; > + }; > + > + qportal6: qman-portal@60000 { > + compatible = "fsl,qman-portal"; > + reg = <0x60000 0x4000 0x4060000 0x4000>; > + interrupts = <0 184 0x4>; > + cell-index = <6>; > + }; > + > + qportal7: qman-portal@70000 { > + compatible = "fsl,qman-portal"; > + reg = <0x70000 0x4000 0x4070000 0x4000>; > + interrupts = <0 186 0x4>; > + cell-index = <7>; > + }; > + > + qportal8: qman-portal@80000 { > + compatible = "fsl,qman-portal"; > + reg = <0x80000 0x4000 0x4080000 0x4000>; > + interrupts = <0 188 0x4>; > + cell-index = <8>; > + }; > +}; > -- > 2.1.0 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 29+ messages in thread
* [PATCH 1/3] dts: arm64: add DPAA QBMan portals 2017-03-31 1:49 ` Shawn Guo (?) @ 2017-05-12 14:14 ` Madalin-Cristian Bucur -1 siblings, 0 replies; 29+ messages in thread From: Madalin-Cristian Bucur @ 2017-05-12 14:14 UTC (permalink / raw) To: linux-arm-kernel > -----Original Message----- > From: Shawn Guo [mailto:shawnguo at kernel.org] > Sent: Friday, March 31, 2017 4:50 AM > On Thu, Mar 30, 2017 at 05:37:50PM +0300, Madalin Bucur wrote: > > Add the DPAA 1.x DPAA QMan and BMan portal nodes. > > > > Signed-off-by: Roy Pledge <roy.pledge@nxp.com> > > Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> > > The patches should be prefixed like 'arm64: dts: ...'. > > > --- > > .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 > +++++++++++++++++++ > > .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 > ++++++++++++++++++++++ > > 2 files changed, 143 insertions(+) > > create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1- > portals.dtsi > > create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1- > portals.dtsi > > What does the suffix number '1' mean here? Will be removed, was used to differentiate between different revisions on PPC, inherited from there. > > > > diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > > new file mode 100644 > > index 0000000..b007344 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > > @@ -0,0 +1,67 @@ > > +/* > > + * QorIQ BMan Portals device tree > > + * > > + * Copyright 2011-2016 Freescale Semiconductor Inc. > > + * > > + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > > + */ > > + > > +&bportals { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + compatible = "simple-bus"; > > + > > + bman-portal at 0 { > > + compatible = "fsl,bman-portal"; > > The bindings/soc/fsl/bman-portals.txt says: Must include > "fsl,bman-portal-<hardware revision>". This is satisfied by device tree fix-ups performed by the bootloader adding the correct version. I'll introduce a comment about this here. > > + reg = <0x0 0x4000 0x4000000 0x4000>; > > Can we write it in the same way how the example in the bindings doc > does? > > reg = <0x0 0x4000>, <0x4000000 0x4000>; > > It's more obvious to tell that it has two memory regions. Will change that. > > + interrupts = <0 173 0x4>; > > Can we use GIC_SPI and IRQ_TYPE_LEVEL_HIGH which are defined by > headers in include/dt-bindings/interrupt-controller/ to make it more > readable? Yes, done. > Shawn <snip> Thanks, Madalin ^ permalink raw reply [flat|nested] 29+ messages in thread
* RE: [PATCH 1/3] dts: arm64: add DPAA QBMan portals @ 2017-05-12 14:14 ` Madalin-Cristian Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin-Cristian Bucur @ 2017-05-12 14:14 UTC (permalink / raw) To: Shawn Guo Cc: robh+dt@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, Gang Liu, catalin.marinas@arm.com, Roy Pledge, will.deacon@arm.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org > -----Original Message----- > From: Shawn Guo [mailto:shawnguo@kernel.org] > Sent: Friday, March 31, 2017 4:50 AM > On Thu, Mar 30, 2017 at 05:37:50PM +0300, Madalin Bucur wrote: > > Add the DPAA 1.x DPAA QMan and BMan portal nodes. > > > > Signed-off-by: Roy Pledge <roy.pledge@nxp.com> > > Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> > > The patches should be prefixed like 'arm64: dts: ...'. > > > --- > > .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 > +++++++++++++++++++ > > .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 > ++++++++++++++++++++++ > > 2 files changed, 143 insertions(+) > > create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1- > portals.dtsi > > create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1- > portals.dtsi > > What does the suffix number '1' mean here? Will be removed, was used to differentiate between different revisions on PPC, inherited from there. > > > > diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > > new file mode 100644 > > index 0000000..b007344 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > > @@ -0,0 +1,67 @@ > > +/* > > + * QorIQ BMan Portals device tree > > + * > > + * Copyright 2011-2016 Freescale Semiconductor Inc. > > + * > > + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > > + */ > > + > > +&bportals { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + compatible = "simple-bus"; > > + > > + bman-portal@0 { > > + compatible = "fsl,bman-portal"; > > The bindings/soc/fsl/bman-portals.txt says: Must include > "fsl,bman-portal-<hardware revision>". This is satisfied by device tree fix-ups performed by the bootloader adding the correct version. I'll introduce a comment about this here. > > + reg = <0x0 0x4000 0x4000000 0x4000>; > > Can we write it in the same way how the example in the bindings doc > does? > > reg = <0x0 0x4000>, <0x4000000 0x4000>; > > It's more obvious to tell that it has two memory regions. Will change that. > > + interrupts = <0 173 0x4>; > > Can we use GIC_SPI and IRQ_TYPE_LEVEL_HIGH which are defined by > headers in include/dt-bindings/interrupt-controller/ to make it more > readable? Yes, done. > Shawn <snip> Thanks, Madalin ^ permalink raw reply [flat|nested] 29+ messages in thread
* RE: [PATCH 1/3] dts: arm64: add DPAA QBMan portals @ 2017-05-12 14:14 ` Madalin-Cristian Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin-Cristian Bucur @ 2017-05-12 14:14 UTC (permalink / raw) To: Shawn Guo Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Gang Liu, catalin.marinas-5wv7dgnIgG8@public.gmane.org, Roy Pledge, will.deacon-5wv7dgnIgG8@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org > -----Original Message----- > From: Shawn Guo [mailto:shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org] > Sent: Friday, March 31, 2017 4:50 AM > On Thu, Mar 30, 2017 at 05:37:50PM +0300, Madalin Bucur wrote: > > Add the DPAA 1.x DPAA QMan and BMan portal nodes. > > > > Signed-off-by: Roy Pledge <roy.pledge-3arQi8VN3Tc@public.gmane.org> > > Signed-off-by: Madalin Bucur <madalin.bucur-3arQi8VN3Tc@public.gmane.org> > > The patches should be prefixed like 'arm64: dts: ...'. > > > --- > > .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 > +++++++++++++++++++ > > .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 > ++++++++++++++++++++++ > > 2 files changed, 143 insertions(+) > > create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1- > portals.dtsi > > create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1- > portals.dtsi > > What does the suffix number '1' mean here? Will be removed, was used to differentiate between different revisions on PPC, inherited from there. > > > > diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > > new file mode 100644 > > index 0000000..b007344 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi > > @@ -0,0 +1,67 @@ > > +/* > > + * QorIQ BMan Portals device tree > > + * > > + * Copyright 2011-2016 Freescale Semiconductor Inc. > > + * > > + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > > + */ > > + > > +&bportals { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + compatible = "simple-bus"; > > + > > + bman-portal@0 { > > + compatible = "fsl,bman-portal"; > > The bindings/soc/fsl/bman-portals.txt says: Must include > "fsl,bman-portal-<hardware revision>". This is satisfied by device tree fix-ups performed by the bootloader adding the correct version. I'll introduce a comment about this here. > > + reg = <0x0 0x4000 0x4000000 0x4000>; > > Can we write it in the same way how the example in the bindings doc > does? > > reg = <0x0 0x4000>, <0x4000000 0x4000>; > > It's more obvious to tell that it has two memory regions. Will change that. > > + interrupts = <0 173 0x4>; > > Can we use GIC_SPI and IRQ_TYPE_LEVEL_HIGH which are defined by > headers in include/dt-bindings/interrupt-controller/ to make it more > readable? Yes, done. > Shawn <snip> Thanks, Madalin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 29+ messages in thread
* [PATCH 2/3] dts: arm64: add LS1043A DPAA QBMan nodes 2017-03-30 14:37 ` Madalin Bucur (?) @ 2017-03-30 14:37 ` Madalin Bucur -1 siblings, 0 replies; 29+ messages in thread From: Madalin Bucur @ 2017-03-30 14:37 UTC (permalink / raw) To: linux-arm-kernel Add the DPAA 1.x QMan and BMan nodes in the LS1043A device tree. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 52 ++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index ec13a6e..8434e89 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -106,6 +106,33 @@ /* DRAM space 1, size: 2GiB DRAM */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + compatible = "shared-dma-pool"; + size = <0 0x1000000>; + alignment = <0 0x1000000>; + no-map; + }; + + qman_fqd: qman-fqd { + compatible = "shared-dma-pool"; + size = <0 0x400000>; + alignment = <0 0x400000>; + no-map; + }; + + qman_pfdr: qman-pfdr { + compatible = "shared-dma-pool"; + size = <0 0x2000000>; + alignment = <0 0x2000000>; + no-map; + }; + }; + sysclk: sysclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -333,6 +360,28 @@ }; }; + qman: qman at 1880000 { + compatible = "fsl,qman"; + reg = <0x00 0x1880000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&qman_fqd &qman_pfdr>; + }; + + bman: bman at 1890000 { + compatible = "fsl,bman"; + reg = <0x00 0x1890000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&bman_fbpr>; + }; + + bportals: bman-portals at 508000000 { + ranges = <0x0 0x5 0x08000000 0x8000000>; + }; + + qportals: qman-portals at 500000000 { + ranges = <0x0 0x5 0x00000000 0x8000000>; + }; + dspi0: dspi at 2100000 { compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; @@ -686,3 +735,6 @@ }; }; + +#include "qoriq-qman1-portals.dtsi" +#include "qoriq-bman1-portals.dtsi" -- 2.1.0 ^ permalink raw reply related [flat|nested] 29+ messages in thread
* [PATCH 2/3] dts: arm64: add LS1043A DPAA QBMan nodes @ 2017-03-30 14:37 ` Madalin Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin Bucur @ 2017-03-30 14:37 UTC (permalink / raw) To: robh+dt, mark.rutland, devicetree Cc: linux-arm-kernel, linux-kernel, catalin.marinas, will.deacon, shawnguo, Gang.Liu, Madalin Bucur, Roy Pledge Add the DPAA 1.x QMan and BMan nodes in the LS1043A device tree. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 52 ++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index ec13a6e..8434e89 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -106,6 +106,33 @@ /* DRAM space 1, size: 2GiB DRAM */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + compatible = "shared-dma-pool"; + size = <0 0x1000000>; + alignment = <0 0x1000000>; + no-map; + }; + + qman_fqd: qman-fqd { + compatible = "shared-dma-pool"; + size = <0 0x400000>; + alignment = <0 0x400000>; + no-map; + }; + + qman_pfdr: qman-pfdr { + compatible = "shared-dma-pool"; + size = <0 0x2000000>; + alignment = <0 0x2000000>; + no-map; + }; + }; + sysclk: sysclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -333,6 +360,28 @@ }; }; + qman: qman@1880000 { + compatible = "fsl,qman"; + reg = <0x00 0x1880000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&qman_fqd &qman_pfdr>; + }; + + bman: bman@1890000 { + compatible = "fsl,bman"; + reg = <0x00 0x1890000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&bman_fbpr>; + }; + + bportals: bman-portals@508000000 { + ranges = <0x0 0x5 0x08000000 0x8000000>; + }; + + qportals: qman-portals@500000000 { + ranges = <0x0 0x5 0x00000000 0x8000000>; + }; + dspi0: dspi@2100000 { compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; @@ -686,3 +735,6 @@ }; }; + +#include "qoriq-qman1-portals.dtsi" +#include "qoriq-bman1-portals.dtsi" -- 2.1.0 ^ permalink raw reply related [flat|nested] 29+ messages in thread
* [PATCH 2/3] dts: arm64: add LS1043A DPAA QBMan nodes @ 2017-03-30 14:37 ` Madalin Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin Bucur @ 2017-03-30 14:37 UTC (permalink / raw) To: robh+dt, mark.rutland, devicetree Cc: linux-arm-kernel, linux-kernel, catalin.marinas, will.deacon, shawnguo, Gang.Liu, Madalin Bucur, Roy Pledge Add the DPAA 1.x QMan and BMan nodes in the LS1043A device tree. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 52 ++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index ec13a6e..8434e89 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -106,6 +106,33 @@ /* DRAM space 1, size: 2GiB DRAM */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + compatible = "shared-dma-pool"; + size = <0 0x1000000>; + alignment = <0 0x1000000>; + no-map; + }; + + qman_fqd: qman-fqd { + compatible = "shared-dma-pool"; + size = <0 0x400000>; + alignment = <0 0x400000>; + no-map; + }; + + qman_pfdr: qman-pfdr { + compatible = "shared-dma-pool"; + size = <0 0x2000000>; + alignment = <0 0x2000000>; + no-map; + }; + }; + sysclk: sysclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -333,6 +360,28 @@ }; }; + qman: qman@1880000 { + compatible = "fsl,qman"; + reg = <0x00 0x1880000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&qman_fqd &qman_pfdr>; + }; + + bman: bman@1890000 { + compatible = "fsl,bman"; + reg = <0x00 0x1890000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&bman_fbpr>; + }; + + bportals: bman-portals@508000000 { + ranges = <0x0 0x5 0x08000000 0x8000000>; + }; + + qportals: qman-portals@500000000 { + ranges = <0x0 0x5 0x00000000 0x8000000>; + }; + dspi0: dspi@2100000 { compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; @@ -686,3 +735,6 @@ }; }; + +#include "qoriq-qman1-portals.dtsi" +#include "qoriq-bman1-portals.dtsi" -- 2.1.0 ^ permalink raw reply related [flat|nested] 29+ messages in thread
* [PATCH 2/3] dts: arm64: add LS1043A DPAA QBMan nodes @ 2017-03-31 2:02 ` Shawn Guo 0 siblings, 0 replies; 29+ messages in thread From: Shawn Guo @ 2017-03-31 2:02 UTC (permalink / raw) To: linux-arm-kernel On Thu, Mar 30, 2017 at 05:37:51PM +0300, Madalin Bucur wrote: > Add the DPAA 1.x QMan and BMan nodes in the LS1043A device tree. > > Signed-off-by: Roy Pledge <roy.pledge@nxp.com> > Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> > --- > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 52 ++++++++++++++++++++++++++ > 1 file changed, 52 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > index ec13a6e..8434e89 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > @@ -106,6 +106,33 @@ > /* DRAM space 1, size: 2GiB DRAM */ > }; > > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + bman_fbpr: bman-fbpr { > + compatible = "shared-dma-pool"; > + size = <0 0x1000000>; > + alignment = <0 0x1000000>; > + no-map; > + }; > + > + qman_fqd: qman-fqd { > + compatible = "shared-dma-pool"; > + size = <0 0x400000>; > + alignment = <0 0x400000>; > + no-map; > + }; > + > + qman_pfdr: qman-pfdr { > + compatible = "shared-dma-pool"; > + size = <0 0x2000000>; > + alignment = <0 0x2000000>; > + no-map; > + }; > + }; > + > sysclk: sysclk { > compatible = "fixed-clock"; > #clock-cells = <0>; > @@ -333,6 +360,28 @@ > }; > }; > > + qman: qman at 1880000 { > + compatible = "fsl,qman"; > + reg = <0x00 0x1880000 0x0 0x10000>; s/0x00/0x0? Shawn > + interrupts = <0 45 0x4>; > + memory-region = <&qman_fqd &qman_pfdr>; > + }; > + > + bman: bman at 1890000 { > + compatible = "fsl,bman"; > + reg = <0x00 0x1890000 0x0 0x10000>; > + interrupts = <0 45 0x4>; > + memory-region = <&bman_fbpr>; > + }; > + > + bportals: bman-portals at 508000000 { > + ranges = <0x0 0x5 0x08000000 0x8000000>; > + }; > + > + qportals: qman-portals at 500000000 { > + ranges = <0x0 0x5 0x00000000 0x8000000>; > + }; > + > dspi0: dspi at 2100000 { > compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; > #address-cells = <1>; > @@ -686,3 +735,6 @@ > }; > > }; > + > +#include "qoriq-qman1-portals.dtsi" > +#include "qoriq-bman1-portals.dtsi" > -- > 2.1.0 > ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH 2/3] dts: arm64: add LS1043A DPAA QBMan nodes @ 2017-03-31 2:02 ` Shawn Guo 0 siblings, 0 replies; 29+ messages in thread From: Shawn Guo @ 2017-03-31 2:02 UTC (permalink / raw) To: Madalin Bucur Cc: robh+dt, mark.rutland, devicetree, linux-arm-kernel, linux-kernel, catalin.marinas, will.deacon, Gang.Liu, Roy Pledge On Thu, Mar 30, 2017 at 05:37:51PM +0300, Madalin Bucur wrote: > Add the DPAA 1.x QMan and BMan nodes in the LS1043A device tree. > > Signed-off-by: Roy Pledge <roy.pledge@nxp.com> > Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> > --- > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 52 ++++++++++++++++++++++++++ > 1 file changed, 52 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > index ec13a6e..8434e89 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > @@ -106,6 +106,33 @@ > /* DRAM space 1, size: 2GiB DRAM */ > }; > > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + bman_fbpr: bman-fbpr { > + compatible = "shared-dma-pool"; > + size = <0 0x1000000>; > + alignment = <0 0x1000000>; > + no-map; > + }; > + > + qman_fqd: qman-fqd { > + compatible = "shared-dma-pool"; > + size = <0 0x400000>; > + alignment = <0 0x400000>; > + no-map; > + }; > + > + qman_pfdr: qman-pfdr { > + compatible = "shared-dma-pool"; > + size = <0 0x2000000>; > + alignment = <0 0x2000000>; > + no-map; > + }; > + }; > + > sysclk: sysclk { > compatible = "fixed-clock"; > #clock-cells = <0>; > @@ -333,6 +360,28 @@ > }; > }; > > + qman: qman@1880000 { > + compatible = "fsl,qman"; > + reg = <0x00 0x1880000 0x0 0x10000>; s/0x00/0x0? Shawn > + interrupts = <0 45 0x4>; > + memory-region = <&qman_fqd &qman_pfdr>; > + }; > + > + bman: bman@1890000 { > + compatible = "fsl,bman"; > + reg = <0x00 0x1890000 0x0 0x10000>; > + interrupts = <0 45 0x4>; > + memory-region = <&bman_fbpr>; > + }; > + > + bportals: bman-portals@508000000 { > + ranges = <0x0 0x5 0x08000000 0x8000000>; > + }; > + > + qportals: qman-portals@500000000 { > + ranges = <0x0 0x5 0x00000000 0x8000000>; > + }; > + > dspi0: dspi@2100000 { > compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; > #address-cells = <1>; > @@ -686,3 +735,6 @@ > }; > > }; > + > +#include "qoriq-qman1-portals.dtsi" > +#include "qoriq-bman1-portals.dtsi" > -- > 2.1.0 > ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH 2/3] dts: arm64: add LS1043A DPAA QBMan nodes @ 2017-03-31 2:02 ` Shawn Guo 0 siblings, 0 replies; 29+ messages in thread From: Shawn Guo @ 2017-03-31 2:02 UTC (permalink / raw) To: Madalin Bucur Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, catalin.marinas-5wv7dgnIgG8, will.deacon-5wv7dgnIgG8, Gang.Liu-3arQi8VN3Tc, Roy Pledge On Thu, Mar 30, 2017 at 05:37:51PM +0300, Madalin Bucur wrote: > Add the DPAA 1.x QMan and BMan nodes in the LS1043A device tree. > > Signed-off-by: Roy Pledge <roy.pledge-3arQi8VN3Tc@public.gmane.org> > Signed-off-by: Madalin Bucur <madalin.bucur-3arQi8VN3Tc@public.gmane.org> > --- > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 52 ++++++++++++++++++++++++++ > 1 file changed, 52 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > index ec13a6e..8434e89 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > @@ -106,6 +106,33 @@ > /* DRAM space 1, size: 2GiB DRAM */ > }; > > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + bman_fbpr: bman-fbpr { > + compatible = "shared-dma-pool"; > + size = <0 0x1000000>; > + alignment = <0 0x1000000>; > + no-map; > + }; > + > + qman_fqd: qman-fqd { > + compatible = "shared-dma-pool"; > + size = <0 0x400000>; > + alignment = <0 0x400000>; > + no-map; > + }; > + > + qman_pfdr: qman-pfdr { > + compatible = "shared-dma-pool"; > + size = <0 0x2000000>; > + alignment = <0 0x2000000>; > + no-map; > + }; > + }; > + > sysclk: sysclk { > compatible = "fixed-clock"; > #clock-cells = <0>; > @@ -333,6 +360,28 @@ > }; > }; > > + qman: qman@1880000 { > + compatible = "fsl,qman"; > + reg = <0x00 0x1880000 0x0 0x10000>; s/0x00/0x0? Shawn > + interrupts = <0 45 0x4>; > + memory-region = <&qman_fqd &qman_pfdr>; > + }; > + > + bman: bman@1890000 { > + compatible = "fsl,bman"; > + reg = <0x00 0x1890000 0x0 0x10000>; > + interrupts = <0 45 0x4>; > + memory-region = <&bman_fbpr>; > + }; > + > + bportals: bman-portals@508000000 { > + ranges = <0x0 0x5 0x08000000 0x8000000>; > + }; > + > + qportals: qman-portals@500000000 { > + ranges = <0x0 0x5 0x00000000 0x8000000>; > + }; > + > dspi0: dspi@2100000 { > compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; > #address-cells = <1>; > @@ -686,3 +735,6 @@ > }; > > }; > + > +#include "qoriq-qman1-portals.dtsi" > +#include "qoriq-bman1-portals.dtsi" > -- > 2.1.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 29+ messages in thread
* [PATCH 2/3] dts: arm64: add LS1043A DPAA QBMan nodes 2017-03-31 2:02 ` Shawn Guo @ 2017-05-12 14:14 ` Madalin-Cristian Bucur -1 siblings, 0 replies; 29+ messages in thread From: Madalin-Cristian Bucur @ 2017-05-12 14:14 UTC (permalink / raw) To: linux-arm-kernel > -----Original Message----- > From: Shawn Guo [mailto:shawnguo at kernel.org] > On Thu, Mar 30, 2017 at 05:37:51PM +0300, Madalin Bucur wrote: > > Add the DPAA 1.x QMan and BMan nodes in the LS1043A device tree. > > > > Signed-off-by: Roy Pledge <roy.pledge@nxp.com> > > Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> > > --- > > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 52 > ++++++++++++++++++++++++++ > > 1 file changed, 52 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > > index ec13a6e..8434e89 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > > @@ -106,6 +106,33 @@ > > /* DRAM space 1, size: 2GiB DRAM */ > > }; > > > > + reserved-memory { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + > > + bman_fbpr: bman-fbpr { > > + compatible = "shared-dma-pool"; > > + size = <0 0x1000000>; > > + alignment = <0 0x1000000>; > > + no-map; > > + }; > > + > > + qman_fqd: qman-fqd { > > + compatible = "shared-dma-pool"; > > + size = <0 0x400000>; > > + alignment = <0 0x400000>; > > + no-map; > > + }; > > + > > + qman_pfdr: qman-pfdr { > > + compatible = "shared-dma-pool"; > > + size = <0 0x2000000>; > > + alignment = <0 0x2000000>; > > + no-map; > > + }; > > + }; > > + > > sysclk: sysclk { > > compatible = "fixed-clock"; > > #clock-cells = <0>; > > @@ -333,6 +360,28 @@ > > }; > > }; > > > > + qman: qman at 1880000 { > > + compatible = "fsl,qman"; > > + reg = <0x00 0x1880000 0x0 0x10000>; > > s/0x00/0x0? > > Shawn Yes, fixed all new introduced occurrences. > > + interrupts = <0 45 0x4>; > > + memory-region = <&qman_fqd &qman_pfdr>; > > + }; > > + > > + bman: bman at 1890000 { > > + compatible = "fsl,bman"; > > + reg = <0x00 0x1890000 0x0 0x10000>; > > + interrupts = <0 45 0x4>; > > + memory-region = <&bman_fbpr>; > > + }; > > + > > + bportals: bman-portals at 508000000 { > > + ranges = <0x0 0x5 0x08000000 0x8000000>; > > + }; > > + > > + qportals: qman-portals at 500000000 { > > + ranges = <0x0 0x5 0x00000000 0x8000000>; > > + }; > > + > > dspi0: dspi at 2100000 { > > compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0- > dspi"; > > #address-cells = <1>; > > @@ -686,3 +735,6 @@ > > }; > > > > }; > > + > > +#include "qoriq-qman1-portals.dtsi" > > +#include "qoriq-bman1-portals.dtsi" > > -- > > 2.1.0 > > ^ permalink raw reply [flat|nested] 29+ messages in thread
* RE: [PATCH 2/3] dts: arm64: add LS1043A DPAA QBMan nodes @ 2017-05-12 14:14 ` Madalin-Cristian Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin-Cristian Bucur @ 2017-05-12 14:14 UTC (permalink / raw) To: Shawn Guo Cc: robh+dt@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, catalin.marinas@arm.com, will.deacon@arm.com, Gang Liu, Roy Pledge > -----Original Message----- > From: Shawn Guo [mailto:shawnguo@kernel.org] > On Thu, Mar 30, 2017 at 05:37:51PM +0300, Madalin Bucur wrote: > > Add the DPAA 1.x QMan and BMan nodes in the LS1043A device tree. > > > > Signed-off-by: Roy Pledge <roy.pledge@nxp.com> > > Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> > > --- > > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 52 > ++++++++++++++++++++++++++ > > 1 file changed, 52 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > > index ec13a6e..8434e89 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi > > @@ -106,6 +106,33 @@ > > /* DRAM space 1, size: 2GiB DRAM */ > > }; > > > > + reserved-memory { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + > > + bman_fbpr: bman-fbpr { > > + compatible = "shared-dma-pool"; > > + size = <0 0x1000000>; > > + alignment = <0 0x1000000>; > > + no-map; > > + }; > > + > > + qman_fqd: qman-fqd { > > + compatible = "shared-dma-pool"; > > + size = <0 0x400000>; > > + alignment = <0 0x400000>; > > + no-map; > > + }; > > + > > + qman_pfdr: qman-pfdr { > > + compatible = "shared-dma-pool"; > > + size = <0 0x2000000>; > > + alignment = <0 0x2000000>; > > + no-map; > > + }; > > + }; > > + > > sysclk: sysclk { > > compatible = "fixed-clock"; > > #clock-cells = <0>; > > @@ -333,6 +360,28 @@ > > }; > > }; > > > > + qman: qman@1880000 { > > + compatible = "fsl,qman"; > > + reg = <0x00 0x1880000 0x0 0x10000>; > > s/0x00/0x0? > > Shawn Yes, fixed all new introduced occurrences. > > + interrupts = <0 45 0x4>; > > + memory-region = <&qman_fqd &qman_pfdr>; > > + }; > > + > > + bman: bman@1890000 { > > + compatible = "fsl,bman"; > > + reg = <0x00 0x1890000 0x0 0x10000>; > > + interrupts = <0 45 0x4>; > > + memory-region = <&bman_fbpr>; > > + }; > > + > > + bportals: bman-portals@508000000 { > > + ranges = <0x0 0x5 0x08000000 0x8000000>; > > + }; > > + > > + qportals: qman-portals@500000000 { > > + ranges = <0x0 0x5 0x00000000 0x8000000>; > > + }; > > + > > dspi0: dspi@2100000 { > > compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0- > dspi"; > > #address-cells = <1>; > > @@ -686,3 +735,6 @@ > > }; > > > > }; > > + > > +#include "qoriq-qman1-portals.dtsi" > > +#include "qoriq-bman1-portals.dtsi" > > -- > > 2.1.0 > > ^ permalink raw reply [flat|nested] 29+ messages in thread
* [PATCH 3/3] dts: arm64: add LS1046A DPAA QBMan nodes @ 2017-03-30 14:37 ` Madalin Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin Bucur @ 2017-03-30 14:37 UTC (permalink / raw) To: linux-arm-kernel Add the QBMan device tree nodes for LS1046A devices. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 52 ++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 4a164b8..67e073a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -268,6 +268,30 @@ }; }; + qman: qman at 1880000 { + compatible = "fsl,qman"; + reg = <0x00 0x1880000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&qman_fqd &qman_pfdr>; + + }; + + bman: bman at 1890000 { + compatible = "fsl,bman"; + reg = <0x00 0x1890000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&bman_fbpr>; + + }; + + qportals: qman-portals at 500000000 { + ranges = <0x0 0x5 0x00000000 0x8000000>; + }; + + bportals: bman-portals at 508000000 { + ranges = <0x0 0x5 0x08000000 0x8000000>; + }; + dcfg: dcfg at 1ee0000 { compatible = "fsl,ls1046a-dcfg", "syscon"; reg = <0x0 0x1ee0000 0x0 0x10000>; @@ -592,4 +616,32 @@ clocks = <&clockgen 4 1>; }; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + compatible = "shared-dma-pool"; + size = <0 0x1000000>; + alignment = <0 0x1000000>; + no-map; + }; + qman_fqd: qman-fqd { + compatible = "shared-dma-pool"; + size = <0 0x800000>; + alignment = <0 0x800000>; + no-map; + }; + qman_pfdr: qman-pfdr { + compatible = "shared-dma-pool"; + size = <0 0x2000000>; + alignment = <0 0x2000000>; + no-map; + }; + }; }; + +#include "qoriq-qman1-portals.dtsi" +#include "qoriq-bman1-portals.dtsi" -- 2.1.0 ^ permalink raw reply related [flat|nested] 29+ messages in thread
* [PATCH 3/3] dts: arm64: add LS1046A DPAA QBMan nodes @ 2017-03-30 14:37 ` Madalin Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin Bucur @ 2017-03-30 14:37 UTC (permalink / raw) To: robh+dt, mark.rutland, devicetree Cc: linux-arm-kernel, linux-kernel, catalin.marinas, will.deacon, shawnguo, Gang.Liu, Madalin Bucur, Roy Pledge Add the QBMan device tree nodes for LS1046A devices. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 52 ++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 4a164b8..67e073a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -268,6 +268,30 @@ }; }; + qman: qman@1880000 { + compatible = "fsl,qman"; + reg = <0x00 0x1880000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&qman_fqd &qman_pfdr>; + + }; + + bman: bman@1890000 { + compatible = "fsl,bman"; + reg = <0x00 0x1890000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&bman_fbpr>; + + }; + + qportals: qman-portals@500000000 { + ranges = <0x0 0x5 0x00000000 0x8000000>; + }; + + bportals: bman-portals@508000000 { + ranges = <0x0 0x5 0x08000000 0x8000000>; + }; + dcfg: dcfg@1ee0000 { compatible = "fsl,ls1046a-dcfg", "syscon"; reg = <0x0 0x1ee0000 0x0 0x10000>; @@ -592,4 +616,32 @@ clocks = <&clockgen 4 1>; }; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + compatible = "shared-dma-pool"; + size = <0 0x1000000>; + alignment = <0 0x1000000>; + no-map; + }; + qman_fqd: qman-fqd { + compatible = "shared-dma-pool"; + size = <0 0x800000>; + alignment = <0 0x800000>; + no-map; + }; + qman_pfdr: qman-pfdr { + compatible = "shared-dma-pool"; + size = <0 0x2000000>; + alignment = <0 0x2000000>; + no-map; + }; + }; }; + +#include "qoriq-qman1-portals.dtsi" +#include "qoriq-bman1-portals.dtsi" -- 2.1.0 ^ permalink raw reply related [flat|nested] 29+ messages in thread
* [PATCH 3/3] dts: arm64: add LS1046A DPAA QBMan nodes @ 2017-03-30 14:37 ` Madalin Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin Bucur @ 2017-03-30 14:37 UTC (permalink / raw) To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, catalin.marinas-5wv7dgnIgG8, will.deacon-5wv7dgnIgG8, shawnguo-DgEjT+Ai2ygdnm+yROfE0A, Gang.Liu-3arQi8VN3Tc, Madalin Bucur, Roy Pledge Add the QBMan device tree nodes for LS1046A devices. Signed-off-by: Roy Pledge <roy.pledge-3arQi8VN3Tc@public.gmane.org> Signed-off-by: Madalin Bucur <madalin.bucur-3arQi8VN3Tc@public.gmane.org> --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 52 ++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 4a164b8..67e073a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -268,6 +268,30 @@ }; }; + qman: qman@1880000 { + compatible = "fsl,qman"; + reg = <0x00 0x1880000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&qman_fqd &qman_pfdr>; + + }; + + bman: bman@1890000 { + compatible = "fsl,bman"; + reg = <0x00 0x1890000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&bman_fbpr>; + + }; + + qportals: qman-portals@500000000 { + ranges = <0x0 0x5 0x00000000 0x8000000>; + }; + + bportals: bman-portals@508000000 { + ranges = <0x0 0x5 0x08000000 0x8000000>; + }; + dcfg: dcfg@1ee0000 { compatible = "fsl,ls1046a-dcfg", "syscon"; reg = <0x0 0x1ee0000 0x0 0x10000>; @@ -592,4 +616,32 @@ clocks = <&clockgen 4 1>; }; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + compatible = "shared-dma-pool"; + size = <0 0x1000000>; + alignment = <0 0x1000000>; + no-map; + }; + qman_fqd: qman-fqd { + compatible = "shared-dma-pool"; + size = <0 0x800000>; + alignment = <0 0x800000>; + no-map; + }; + qman_pfdr: qman-pfdr { + compatible = "shared-dma-pool"; + size = <0 0x2000000>; + alignment = <0 0x2000000>; + no-map; + }; + }; }; + +#include "qoriq-qman1-portals.dtsi" +#include "qoriq-bman1-portals.dtsi" -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 29+ messages in thread
* [PATCH 3/3] dts: arm64: add LS1046A DPAA QBMan nodes @ 2017-03-31 2:29 ` Shawn Guo 0 siblings, 0 replies; 29+ messages in thread From: Shawn Guo @ 2017-03-31 2:29 UTC (permalink / raw) To: linux-arm-kernel On Thu, Mar 30, 2017 at 05:37:52PM +0300, Madalin Bucur wrote: > Add the QBMan device tree nodes for LS1046A devices. > > Signed-off-by: Roy Pledge <roy.pledge@nxp.com> > Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> > --- > arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 52 ++++++++++++++++++++++++++ > 1 file changed, 52 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > index 4a164b8..67e073a 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > @@ -268,6 +268,30 @@ > }; > }; > > + qman: qman at 1880000 { > + compatible = "fsl,qman"; > + reg = <0x00 0x1880000 0x0 0x10000>; > + interrupts = <0 45 0x4>; > + memory-region = <&qman_fqd &qman_pfdr>; > + > + }; > + > + bman: bman at 1890000 { > + compatible = "fsl,bman"; > + reg = <0x00 0x1890000 0x0 0x10000>; > + interrupts = <0 45 0x4>; > + memory-region = <&bman_fbpr>; > + > + }; > + > + qportals: qman-portals at 500000000 { > + ranges = <0x0 0x5 0x00000000 0x8000000>; > + }; > + > + bportals: bman-portals at 508000000 { > + ranges = <0x0 0x5 0x08000000 0x8000000>; > + }; > + > dcfg: dcfg at 1ee0000 { > compatible = "fsl,ls1046a-dcfg", "syscon"; > reg = <0x0 0x1ee0000 0x0 0x10000>; > @@ -592,4 +616,32 @@ > clocks = <&clockgen 4 1>; > }; > }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + bman_fbpr: bman-fbpr { > + compatible = "shared-dma-pool"; > + size = <0 0x1000000>; > + alignment = <0 0x1000000>; > + no-map; > + }; Please have a newline between nodes. Shawn > + qman_fqd: qman-fqd { > + compatible = "shared-dma-pool"; > + size = <0 0x800000>; > + alignment = <0 0x800000>; > + no-map; > + }; > + qman_pfdr: qman-pfdr { > + compatible = "shared-dma-pool"; > + size = <0 0x2000000>; > + alignment = <0 0x2000000>; > + no-map; > + }; > + }; > }; > + > +#include "qoriq-qman1-portals.dtsi" > +#include "qoriq-bman1-portals.dtsi" > -- > 2.1.0 > ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH 3/3] dts: arm64: add LS1046A DPAA QBMan nodes @ 2017-03-31 2:29 ` Shawn Guo 0 siblings, 0 replies; 29+ messages in thread From: Shawn Guo @ 2017-03-31 2:29 UTC (permalink / raw) To: Madalin Bucur Cc: robh+dt, mark.rutland, devicetree, linux-arm-kernel, linux-kernel, catalin.marinas, will.deacon, Gang.Liu, Roy Pledge On Thu, Mar 30, 2017 at 05:37:52PM +0300, Madalin Bucur wrote: > Add the QBMan device tree nodes for LS1046A devices. > > Signed-off-by: Roy Pledge <roy.pledge@nxp.com> > Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> > --- > arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 52 ++++++++++++++++++++++++++ > 1 file changed, 52 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > index 4a164b8..67e073a 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > @@ -268,6 +268,30 @@ > }; > }; > > + qman: qman@1880000 { > + compatible = "fsl,qman"; > + reg = <0x00 0x1880000 0x0 0x10000>; > + interrupts = <0 45 0x4>; > + memory-region = <&qman_fqd &qman_pfdr>; > + > + }; > + > + bman: bman@1890000 { > + compatible = "fsl,bman"; > + reg = <0x00 0x1890000 0x0 0x10000>; > + interrupts = <0 45 0x4>; > + memory-region = <&bman_fbpr>; > + > + }; > + > + qportals: qman-portals@500000000 { > + ranges = <0x0 0x5 0x00000000 0x8000000>; > + }; > + > + bportals: bman-portals@508000000 { > + ranges = <0x0 0x5 0x08000000 0x8000000>; > + }; > + > dcfg: dcfg@1ee0000 { > compatible = "fsl,ls1046a-dcfg", "syscon"; > reg = <0x0 0x1ee0000 0x0 0x10000>; > @@ -592,4 +616,32 @@ > clocks = <&clockgen 4 1>; > }; > }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + bman_fbpr: bman-fbpr { > + compatible = "shared-dma-pool"; > + size = <0 0x1000000>; > + alignment = <0 0x1000000>; > + no-map; > + }; Please have a newline between nodes. Shawn > + qman_fqd: qman-fqd { > + compatible = "shared-dma-pool"; > + size = <0 0x800000>; > + alignment = <0 0x800000>; > + no-map; > + }; > + qman_pfdr: qman-pfdr { > + compatible = "shared-dma-pool"; > + size = <0 0x2000000>; > + alignment = <0 0x2000000>; > + no-map; > + }; > + }; > }; > + > +#include "qoriq-qman1-portals.dtsi" > +#include "qoriq-bman1-portals.dtsi" > -- > 2.1.0 > ^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH 3/3] dts: arm64: add LS1046A DPAA QBMan nodes @ 2017-03-31 2:29 ` Shawn Guo 0 siblings, 0 replies; 29+ messages in thread From: Shawn Guo @ 2017-03-31 2:29 UTC (permalink / raw) To: Madalin Bucur Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-kernel-u79uwXL29TY76Z2rM5mHXA, catalin.marinas-5wv7dgnIgG8, will.deacon-5wv7dgnIgG8, Gang.Liu-3arQi8VN3Tc, Roy Pledge On Thu, Mar 30, 2017 at 05:37:52PM +0300, Madalin Bucur wrote: > Add the QBMan device tree nodes for LS1046A devices. > > Signed-off-by: Roy Pledge <roy.pledge-3arQi8VN3Tc@public.gmane.org> > Signed-off-by: Madalin Bucur <madalin.bucur-3arQi8VN3Tc@public.gmane.org> > --- > arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 52 ++++++++++++++++++++++++++ > 1 file changed, 52 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > index 4a164b8..67e073a 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > @@ -268,6 +268,30 @@ > }; > }; > > + qman: qman@1880000 { > + compatible = "fsl,qman"; > + reg = <0x00 0x1880000 0x0 0x10000>; > + interrupts = <0 45 0x4>; > + memory-region = <&qman_fqd &qman_pfdr>; > + > + }; > + > + bman: bman@1890000 { > + compatible = "fsl,bman"; > + reg = <0x00 0x1890000 0x0 0x10000>; > + interrupts = <0 45 0x4>; > + memory-region = <&bman_fbpr>; > + > + }; > + > + qportals: qman-portals@500000000 { > + ranges = <0x0 0x5 0x00000000 0x8000000>; > + }; > + > + bportals: bman-portals@508000000 { > + ranges = <0x0 0x5 0x08000000 0x8000000>; > + }; > + > dcfg: dcfg@1ee0000 { > compatible = "fsl,ls1046a-dcfg", "syscon"; > reg = <0x0 0x1ee0000 0x0 0x10000>; > @@ -592,4 +616,32 @@ > clocks = <&clockgen 4 1>; > }; > }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + bman_fbpr: bman-fbpr { > + compatible = "shared-dma-pool"; > + size = <0 0x1000000>; > + alignment = <0 0x1000000>; > + no-map; > + }; Please have a newline between nodes. Shawn > + qman_fqd: qman-fqd { > + compatible = "shared-dma-pool"; > + size = <0 0x800000>; > + alignment = <0 0x800000>; > + no-map; > + }; > + qman_pfdr: qman-pfdr { > + compatible = "shared-dma-pool"; > + size = <0 0x2000000>; > + alignment = <0 0x2000000>; > + no-map; > + }; > + }; > }; > + > +#include "qoriq-qman1-portals.dtsi" > +#include "qoriq-bman1-portals.dtsi" > -- > 2.1.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 29+ messages in thread
* [PATCH 3/3] dts: arm64: add LS1046A DPAA QBMan nodes 2017-03-31 2:29 ` Shawn Guo (?) @ 2017-05-12 14:14 ` Madalin-Cristian Bucur -1 siblings, 0 replies; 29+ messages in thread From: Madalin-Cristian Bucur @ 2017-05-12 14:14 UTC (permalink / raw) To: linux-arm-kernel > -----Original Message----- > From: Shawn Guo [mailto:shawnguo at kernel.org] > Sent: Friday, March 31, 2017 5:30 AM > On Thu, Mar 30, 2017 at 05:37:52PM +0300, Madalin Bucur wrote: > > Add the QBMan device tree nodes for LS1046A devices. > > > > Signed-off-by: Roy Pledge <roy.pledge@nxp.com> > > Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> > > --- > > arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 52 > ++++++++++++++++++++++++++ > > 1 file changed, 52 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > > index 4a164b8..67e073a 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > > @@ -268,6 +268,30 @@ > > }; > > }; > > > > + qman: qman at 1880000 { > > + compatible = "fsl,qman"; > > + reg = <0x00 0x1880000 0x0 0x10000>; > > + interrupts = <0 45 0x4>; > > + memory-region = <&qman_fqd &qman_pfdr>; > > + > > + }; > > + > > + bman: bman at 1890000 { > > + compatible = "fsl,bman"; > > + reg = <0x00 0x1890000 0x0 0x10000>; > > + interrupts = <0 45 0x4>; > > + memory-region = <&bman_fbpr>; > > + > > + }; > > + > > + qportals: qman-portals at 500000000 { > > + ranges = <0x0 0x5 0x00000000 0x8000000>; > > + }; > > + > > + bportals: bman-portals at 508000000 { > > + ranges = <0x0 0x5 0x08000000 0x8000000>; > > + }; > > + > > dcfg: dcfg at 1ee0000 { > > compatible = "fsl,ls1046a-dcfg", "syscon"; > > reg = <0x0 0x1ee0000 0x0 0x10000>; > > @@ -592,4 +616,32 @@ > > clocks = <&clockgen 4 1>; > > }; > > }; > > + > > + reserved-memory { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + > > + bman_fbpr: bman-fbpr { > > + compatible = "shared-dma-pool"; > > + size = <0 0x1000000>; > > + alignment = <0 0x1000000>; > > + no-map; > > + }; > > Please have a newline between nodes. > > Shawn Done. > > + qman_fqd: qman-fqd { > > + compatible = "shared-dma-pool"; > > + size = <0 0x800000>; > > + alignment = <0 0x800000>; > > + no-map; > > + }; > > + qman_pfdr: qman-pfdr { > > + compatible = "shared-dma-pool"; > > + size = <0 0x2000000>; > > + alignment = <0 0x2000000>; > > + no-map; > > + }; > > + }; > > }; > > + > > +#include "qoriq-qman1-portals.dtsi" > > +#include "qoriq-bman1-portals.dtsi" > > -- > > 2.1.0 > > ^ permalink raw reply [flat|nested] 29+ messages in thread
* RE: [PATCH 3/3] dts: arm64: add LS1046A DPAA QBMan nodes @ 2017-05-12 14:14 ` Madalin-Cristian Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin-Cristian Bucur @ 2017-05-12 14:14 UTC (permalink / raw) To: Shawn Guo Cc: robh+dt@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, catalin.marinas@arm.com, will.deacon@arm.com, Gang Liu, Roy Pledge > -----Original Message----- > From: Shawn Guo [mailto:shawnguo@kernel.org] > Sent: Friday, March 31, 2017 5:30 AM > On Thu, Mar 30, 2017 at 05:37:52PM +0300, Madalin Bucur wrote: > > Add the QBMan device tree nodes for LS1046A devices. > > > > Signed-off-by: Roy Pledge <roy.pledge@nxp.com> > > Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> > > --- > > arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 52 > ++++++++++++++++++++++++++ > > 1 file changed, 52 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > > index 4a164b8..67e073a 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > > @@ -268,6 +268,30 @@ > > }; > > }; > > > > + qman: qman@1880000 { > > + compatible = "fsl,qman"; > > + reg = <0x00 0x1880000 0x0 0x10000>; > > + interrupts = <0 45 0x4>; > > + memory-region = <&qman_fqd &qman_pfdr>; > > + > > + }; > > + > > + bman: bman@1890000 { > > + compatible = "fsl,bman"; > > + reg = <0x00 0x1890000 0x0 0x10000>; > > + interrupts = <0 45 0x4>; > > + memory-region = <&bman_fbpr>; > > + > > + }; > > + > > + qportals: qman-portals@500000000 { > > + ranges = <0x0 0x5 0x00000000 0x8000000>; > > + }; > > + > > + bportals: bman-portals@508000000 { > > + ranges = <0x0 0x5 0x08000000 0x8000000>; > > + }; > > + > > dcfg: dcfg@1ee0000 { > > compatible = "fsl,ls1046a-dcfg", "syscon"; > > reg = <0x0 0x1ee0000 0x0 0x10000>; > > @@ -592,4 +616,32 @@ > > clocks = <&clockgen 4 1>; > > }; > > }; > > + > > + reserved-memory { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + > > + bman_fbpr: bman-fbpr { > > + compatible = "shared-dma-pool"; > > + size = <0 0x1000000>; > > + alignment = <0 0x1000000>; > > + no-map; > > + }; > > Please have a newline between nodes. > > Shawn Done. > > + qman_fqd: qman-fqd { > > + compatible = "shared-dma-pool"; > > + size = <0 0x800000>; > > + alignment = <0 0x800000>; > > + no-map; > > + }; > > + qman_pfdr: qman-pfdr { > > + compatible = "shared-dma-pool"; > > + size = <0 0x2000000>; > > + alignment = <0 0x2000000>; > > + no-map; > > + }; > > + }; > > }; > > + > > +#include "qoriq-qman1-portals.dtsi" > > +#include "qoriq-bman1-portals.dtsi" > > -- > > 2.1.0 > > ^ permalink raw reply [flat|nested] 29+ messages in thread
* RE: [PATCH 3/3] dts: arm64: add LS1046A DPAA QBMan nodes @ 2017-05-12 14:14 ` Madalin-Cristian Bucur 0 siblings, 0 replies; 29+ messages in thread From: Madalin-Cristian Bucur @ 2017-05-12 14:14 UTC (permalink / raw) To: Shawn Guo Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, catalin.marinas-5wv7dgnIgG8@public.gmane.org, will.deacon-5wv7dgnIgG8@public.gmane.org, Gang Liu, Roy Pledge > -----Original Message----- > From: Shawn Guo [mailto:shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org] > Sent: Friday, March 31, 2017 5:30 AM > On Thu, Mar 30, 2017 at 05:37:52PM +0300, Madalin Bucur wrote: > > Add the QBMan device tree nodes for LS1046A devices. > > > > Signed-off-by: Roy Pledge <roy.pledge-3arQi8VN3Tc@public.gmane.org> > > Signed-off-by: Madalin Bucur <madalin.bucur-3arQi8VN3Tc@public.gmane.org> > > --- > > arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 52 > ++++++++++++++++++++++++++ > > 1 file changed, 52 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > > index 4a164b8..67e073a 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > > @@ -268,6 +268,30 @@ > > }; > > }; > > > > + qman: qman@1880000 { > > + compatible = "fsl,qman"; > > + reg = <0x00 0x1880000 0x0 0x10000>; > > + interrupts = <0 45 0x4>; > > + memory-region = <&qman_fqd &qman_pfdr>; > > + > > + }; > > + > > + bman: bman@1890000 { > > + compatible = "fsl,bman"; > > + reg = <0x00 0x1890000 0x0 0x10000>; > > + interrupts = <0 45 0x4>; > > + memory-region = <&bman_fbpr>; > > + > > + }; > > + > > + qportals: qman-portals@500000000 { > > + ranges = <0x0 0x5 0x00000000 0x8000000>; > > + }; > > + > > + bportals: bman-portals@508000000 { > > + ranges = <0x0 0x5 0x08000000 0x8000000>; > > + }; > > + > > dcfg: dcfg@1ee0000 { > > compatible = "fsl,ls1046a-dcfg", "syscon"; > > reg = <0x0 0x1ee0000 0x0 0x10000>; > > @@ -592,4 +616,32 @@ > > clocks = <&clockgen 4 1>; > > }; > > }; > > + > > + reserved-memory { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + > > + bman_fbpr: bman-fbpr { > > + compatible = "shared-dma-pool"; > > + size = <0 0x1000000>; > > + alignment = <0 0x1000000>; > > + no-map; > > + }; > > Please have a newline between nodes. > > Shawn Done. > > + qman_fqd: qman-fqd { > > + compatible = "shared-dma-pool"; > > + size = <0 0x800000>; > > + alignment = <0 0x800000>; > > + no-map; > > + }; > > + qman_pfdr: qman-pfdr { > > + compatible = "shared-dma-pool"; > > + size = <0 0x2000000>; > > + alignment = <0 0x2000000>; > > + no-map; > > + }; > > + }; > > }; > > + > > +#include "qoriq-qman1-portals.dtsi" > > +#include "qoriq-bman1-portals.dtsi" > > -- > > 2.1.0 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 29+ messages in thread
end of thread, other threads:[~2017-05-12 14:14 UTC | newest] Thread overview: 29+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-03-30 14:37 [PATCH 0/3] introduce QorIQ DPAA 1.x QBMan device tree nodes Madalin Bucur 2017-03-30 14:37 ` Madalin Bucur 2017-03-30 14:37 ` Madalin Bucur 2017-03-30 14:37 ` [PATCH 1/3] dts: arm64: add DPAA QBMan portals Madalin Bucur 2017-03-30 14:37 ` Madalin Bucur 2017-03-30 14:37 ` Madalin Bucur 2017-03-31 1:49 ` Shawn Guo 2017-03-31 1:49 ` Shawn Guo 2017-03-31 1:49 ` Shawn Guo 2017-05-12 14:14 ` Madalin-Cristian Bucur 2017-05-12 14:14 ` Madalin-Cristian Bucur 2017-05-12 14:14 ` Madalin-Cristian Bucur 2017-03-30 14:37 ` [PATCH 2/3] dts: arm64: add LS1043A DPAA QBMan nodes Madalin Bucur 2017-03-30 14:37 ` Madalin Bucur 2017-03-30 14:37 ` Madalin Bucur 2017-03-31 2:02 ` Shawn Guo 2017-03-31 2:02 ` Shawn Guo 2017-03-31 2:02 ` Shawn Guo 2017-05-12 14:14 ` Madalin-Cristian Bucur 2017-05-12 14:14 ` Madalin-Cristian Bucur 2017-03-30 14:37 ` [PATCH 3/3] dts: arm64: add LS1046A " Madalin Bucur 2017-03-30 14:37 ` Madalin Bucur 2017-03-30 14:37 ` Madalin Bucur 2017-03-31 2:29 ` Shawn Guo 2017-03-31 2:29 ` Shawn Guo 2017-03-31 2:29 ` Shawn Guo 2017-05-12 14:14 ` Madalin-Cristian Bucur 2017-05-12 14:14 ` Madalin-Cristian Bucur 2017-05-12 14:14 ` Madalin-Cristian Bucur
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.