[PATCH 0/3] ZX296718 clock update for VGA support

[PATCH 0/3] ZX296718 clock update for VGA support

[Shawn Guo]

From: Shawn Guo <shawn.guo@linaro.org>

This is a series which makes necessary changes on zx296718 clock driver
in order to support VGA display.  The second patch actually fixes a bug
that is discovered by VGA driver debugging.

Shawn Guo (3):
  clk: zte: set CLK_SET_RATE_PARENT for a few zx296718 clocks
  zte: clk: pd_bit is not 0 on zx296718
  clk: zte: add pll_vga clock for zx296718

 drivers/clk/zte/clk-zx296718.c | 30 +++++++++++++++++++++++++++---
 drivers/clk/zte/clk.c          | 12 +++++++++++-
 drivers/clk/zte/clk.h          |  6 +++++-
 3 files changed, 43 insertions(+), 5 deletions(-)

-- 
1.9.1

[PATCH 0/3] ZX296718 clock update for VGA support

[Shawn Guo]

From: Shawn Guo <shawn.guo@linaro.org>

This is a series which makes necessary changes on zx296718 clock driver
in order to support VGA display.  The second patch actually fixes a bug
that is discovered by VGA driver debugging.

Shawn Guo (3):
  clk: zte: set CLK_SET_RATE_PARENT for a few zx296718 clocks
  zte: clk: pd_bit is not 0 on zx296718
  clk: zte: add pll_vga clock for zx296718

 drivers/clk/zte/clk-zx296718.c | 30 +++++++++++++++++++++++++++---
 drivers/clk/zte/clk.c          | 12 +++++++++++-
 drivers/clk/zte/clk.h          |  6 +++++-
 3 files changed, 43 insertions(+), 5 deletions(-)

-- 
1.9.1

[PATCH 1/3] clk: zte: set CLK_SET_RATE_PARENT for a few zx296718 clocks

[Shawn Guo]

From: Shawn Guo <shawn.guo@linaro.org>

To support VOU VGA display driver with different modes, we need to set
flag for a few clocks, so that clk_set_rate() call in VOU driver can get
VGA device desired pixel rate.

While at it, the divider between pll_vga and clk_vga gets corrected, as
it's 1:1 instead of 1:2.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/zte/clk-zx296718.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/zte/clk-zx296718.c b/drivers/clk/zte/clk-zx296718.c
index 2f7c668643fe..f2e1e8b3a8d5 100644
--- a/drivers/clk/zte/clk-zx296718.c
+++ b/drivers/clk/zte/clk-zx296718.c
@@ -409,7 +409,7 @@
 	FFACTOR(0, "clk54m",		"pll_mm1", 1, 24, 0),
 	/* vga */
 	FFACTOR(0, "pll_vga_1800m",	"pll_vga", 1, 1, 0),
-	FFACTOR(0, "clk_vga",		"pll_vga", 1, 2, 0),
+	FFACTOR(0, "clk_vga",		"pll_vga", 1, 1, CLK_SET_RATE_PARENT),
 	/* pll ddr */
 	FFACTOR(0, "clk466m",		"pll_ddr", 1, 2, 0),
 
@@ -458,8 +458,8 @@
 	MUX(0, "sappu_a_mux",	 sappu_aclk_p,	  TOP_CLK_MUX5,  4, 2),
 	MUX(0, "sappu_w_mux",	 sappu_wclk_p,	  TOP_CLK_MUX5,  8, 3),
 	MUX(0, "vou_a_mux",	 vou_aclk_p,	  TOP_CLK_MUX7,  0, 3),
-	MUX(0, "vou_main_w_mux", vou_main_wclk_p, TOP_CLK_MUX7,  4, 3),
-	MUX(0, "vou_aux_w_mux",	 vou_aux_wclk_p,  TOP_CLK_MUX7,  8, 3),
+	MUX_F(0, "vou_main_w_mux", vou_main_wclk_p, TOP_CLK_MUX7,  4, 3, CLK_SET_RATE_PARENT, 0),
+	MUX_F(0, "vou_aux_w_mux",  vou_aux_wclk_p,  TOP_CLK_MUX7,  8, 3, CLK_SET_RATE_PARENT, 0),
 	MUX(0, "vou_ppu_w_mux",	 vou_ppu_wclk_p,  TOP_CLK_MUX7, 12, 3),
 	MUX(0, "vga_i2c_mux",	 vga_i2c_wclk_p,  TOP_CLK_MUX7, 16, 1),
 	MUX(0, "viu_m0_a_mux",	 viu_m0_aclk_p,	  TOP_CLK_MUX6,  0, 3),
-- 
1.9.1

[PATCH 1/3] clk: zte: set CLK_SET_RATE_PARENT for a few zx296718 clocks

[Shawn Guo]

From: Shawn Guo <shawn.guo@linaro.org>

To support VOU VGA display driver with different modes, we need to set
flag for a few clocks, so that clk_set_rate() call in VOU driver can get
VGA device desired pixel rate.

While at it, the divider between pll_vga and clk_vga gets corrected, as
it's 1:1 instead of 1:2.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/zte/clk-zx296718.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/zte/clk-zx296718.c b/drivers/clk/zte/clk-zx296718.c
index 2f7c668643fe..f2e1e8b3a8d5 100644
--- a/drivers/clk/zte/clk-zx296718.c
+++ b/drivers/clk/zte/clk-zx296718.c
@@ -409,7 +409,7 @@
 	FFACTOR(0, "clk54m",		"pll_mm1", 1, 24, 0),
 	/* vga */
 	FFACTOR(0, "pll_vga_1800m",	"pll_vga", 1, 1, 0),
-	FFACTOR(0, "clk_vga",		"pll_vga", 1, 2, 0),
+	FFACTOR(0, "clk_vga",		"pll_vga", 1, 1, CLK_SET_RATE_PARENT),
 	/* pll ddr */
 	FFACTOR(0, "clk466m",		"pll_ddr", 1, 2, 0),
 
@@ -458,8 +458,8 @@
 	MUX(0, "sappu_a_mux",	 sappu_aclk_p,	  TOP_CLK_MUX5,  4, 2),
 	MUX(0, "sappu_w_mux",	 sappu_wclk_p,	  TOP_CLK_MUX5,  8, 3),
 	MUX(0, "vou_a_mux",	 vou_aclk_p,	  TOP_CLK_MUX7,  0, 3),
-	MUX(0, "vou_main_w_mux", vou_main_wclk_p, TOP_CLK_MUX7,  4, 3),
-	MUX(0, "vou_aux_w_mux",	 vou_aux_wclk_p,  TOP_CLK_MUX7,  8, 3),
+	MUX_F(0, "vou_main_w_mux", vou_main_wclk_p, TOP_CLK_MUX7,  4, 3, CLK_SET_RATE_PARENT, 0),
+	MUX_F(0, "vou_aux_w_mux",  vou_aux_wclk_p,  TOP_CLK_MUX7,  8, 3, CLK_SET_RATE_PARENT, 0),
 	MUX(0, "vou_ppu_w_mux",	 vou_ppu_wclk_p,  TOP_CLK_MUX7, 12, 3),
 	MUX(0, "vga_i2c_mux",	 vga_i2c_wclk_p,  TOP_CLK_MUX7, 16, 1),
 	MUX(0, "viu_m0_a_mux",	 viu_m0_aclk_p,	  TOP_CLK_MUX6,  0, 3),
-- 
1.9.1

Re: [PATCH 1/3] clk: zte: set CLK_SET_RATE_PARENT for a few zx296718 clocks

[Jun Nie]

2017-03-21 16:38 GMT+08:00 Shawn Guo <shawnguo@kernel.org>:
> From: Shawn Guo <shawn.guo@linaro.org>
>
> To support VOU VGA display driver with different modes, we need to set
> flag for a few clocks, so that clk_set_rate() call in VOU driver can get
> VGA device desired pixel rate.
>
> While at it, the divider between pll_vga and clk_vga gets corrected, as
> it's 1:1 instead of 1:2.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Reviewed-by: Jun Nie <jun.nie@linaro.org>

[PATCH 1/3] clk: zte: set CLK_SET_RATE_PARENT for a few zx296718 clocks

[Jun Nie]

2017-03-21 16:38 GMT+08:00 Shawn Guo <shawnguo@kernel.org>:
> From: Shawn Guo <shawn.guo@linaro.org>
>
> To support VOU VGA display driver with different modes, we need to set
> flag for a few clocks, so that clk_set_rate() call in VOU driver can get
> VGA device desired pixel rate.
>
> While at it, the divider between pll_vga and clk_vga gets corrected, as
> it's 1:1 instead of 1:2.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Reviewed-by: Jun Nie <jun.nie@linaro.org>

Re: [PATCH 1/3] clk: zte: set CLK_SET_RATE_PARENT for a few zx296718 clocks

[Stephen Boyd]

On 03/21, Shawn Guo wrote:
> From: Shawn Guo <shawn.guo@linaro.org>
> 
> To support VOU VGA display driver with different modes, we need to set
> flag for a few clocks, so that clk_set_rate() call in VOU driver can get
> VGA device desired pixel rate.
> 
> While at it, the divider between pll_vga and clk_vga gets corrected, as
> it's 1:1 instead of 1:2.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 1/3] clk: zte: set CLK_SET_RATE_PARENT for a few zx296718 clocks

[Stephen Boyd]

On 03/21, Shawn Guo wrote:
> From: Shawn Guo <shawn.guo@linaro.org>
> 
> To support VOU VGA display driver with different modes, we need to set
> flag for a few clocks, so that clk_set_rate() call in VOU driver can get
> VGA device desired pixel rate.
> 
> While at it, the divider between pll_vga and clk_vga gets corrected, as
> it's 1:1 instead of 1:2.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 2/3] zte: clk: pd_bit is not 0 on zx296718

[Shawn Guo]

From: Shawn Guo <shawn.guo@linaro.org>

The bit 0 of PLL_CFG0 register is not powerdown on zx296718, but part of
of postdiv2 field.  The consequence is that functions like hw_to_idx()
and zx_pll_enable() will end up tampering the postdiv2 of the PLL.

Let's fix it by defining pd_bit 0xff which is obviously invalid for a
bit position and having PLL driver check the validity before operating
on the bit.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/zte/clk.c | 12 +++++++++++-
 drivers/clk/zte/clk.h |  6 +++++-
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/zte/clk.c b/drivers/clk/zte/clk.c
index 878d879b23ff..b82031766ffa 100644
--- a/drivers/clk/zte/clk.c
+++ b/drivers/clk/zte/clk.c
@@ -52,7 +52,10 @@ static int hw_to_idx(struct clk_zx_pll *zx_pll)
 
 	/* For matching the value in lookup table */
 	hw_cfg0 &= ~BIT(zx_pll->lock_bit);
-	hw_cfg0 |= BIT(zx_pll->pd_bit);
+
+	/* Check availability of pd_bit */
+	if (zx_pll->pd_bit < 32)
+		hw_cfg0 |= BIT(zx_pll->pd_bit);
 
 	for (i = 0; i < zx_pll->count; i++) {
 		if (hw_cfg0 == config[i].cfg0 && hw_cfg1 == config[i].cfg1)
@@ -108,6 +111,10 @@ static int zx_pll_enable(struct clk_hw *hw)
 	struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
 	u32 reg;
 
+	/* If pd_bit is not available, simply return success. */
+	if (zx_pll->pd_bit > 31)
+		return 0;
+
 	reg = readl_relaxed(zx_pll->reg_base);
 	writel_relaxed(reg & ~BIT(zx_pll->pd_bit), zx_pll->reg_base);
 
@@ -120,6 +127,9 @@ static void zx_pll_disable(struct clk_hw *hw)
 	struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
 	u32 reg;
 
+	if (zx_pll->pd_bit > 31)
+		return;
+
 	reg = readl_relaxed(zx_pll->reg_base);
 	writel_relaxed(reg | BIT(zx_pll->pd_bit), zx_pll->reg_base);
 }
diff --git a/drivers/clk/zte/clk.h b/drivers/clk/zte/clk.h
index 84a55a3e2bd4..4df0f121b56d 100644
--- a/drivers/clk/zte/clk.h
+++ b/drivers/clk/zte/clk.h
@@ -66,8 +66,12 @@ struct clk_zx_pll {
 				CLK_GET_RATE_NOCACHE),			\
 }
 
+/*
+ * The pd_bit is not available on ZX296718, so let's pass something
+ * bigger than 31, e.g. 0xff, to indicate that.
+ */
 #define ZX296718_PLL(_name, _parent, _reg, _table)			\
-ZX_PLL(_name, _parent, _reg, _table, 0, 30)
+ZX_PLL(_name, _parent, _reg, _table, 0xff, 30)
 
 struct zx_clk_gate {
 	struct clk_gate gate;
-- 
1.9.1

[PATCH 2/3] zte: clk: pd_bit is not 0 on zx296718

[Shawn Guo]

From: Shawn Guo <shawn.guo@linaro.org>

The bit 0 of PLL_CFG0 register is not powerdown on zx296718, but part of
of postdiv2 field.  The consequence is that functions like hw_to_idx()
and zx_pll_enable() will end up tampering the postdiv2 of the PLL.

Let's fix it by defining pd_bit 0xff which is obviously invalid for a
bit position and having PLL driver check the validity before operating
on the bit.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/zte/clk.c | 12 +++++++++++-
 drivers/clk/zte/clk.h |  6 +++++-
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/zte/clk.c b/drivers/clk/zte/clk.c
index 878d879b23ff..b82031766ffa 100644
--- a/drivers/clk/zte/clk.c
+++ b/drivers/clk/zte/clk.c
@@ -52,7 +52,10 @@ static int hw_to_idx(struct clk_zx_pll *zx_pll)
 
 	/* For matching the value in lookup table */
 	hw_cfg0 &= ~BIT(zx_pll->lock_bit);
-	hw_cfg0 |= BIT(zx_pll->pd_bit);
+
+	/* Check availability of pd_bit */
+	if (zx_pll->pd_bit < 32)
+		hw_cfg0 |= BIT(zx_pll->pd_bit);
 
 	for (i = 0; i < zx_pll->count; i++) {
 		if (hw_cfg0 == config[i].cfg0 && hw_cfg1 == config[i].cfg1)
@@ -108,6 +111,10 @@ static int zx_pll_enable(struct clk_hw *hw)
 	struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
 	u32 reg;
 
+	/* If pd_bit is not available, simply return success. */
+	if (zx_pll->pd_bit > 31)
+		return 0;
+
 	reg = readl_relaxed(zx_pll->reg_base);
 	writel_relaxed(reg & ~BIT(zx_pll->pd_bit), zx_pll->reg_base);
 
@@ -120,6 +127,9 @@ static void zx_pll_disable(struct clk_hw *hw)
 	struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
 	u32 reg;
 
+	if (zx_pll->pd_bit > 31)
+		return;
+
 	reg = readl_relaxed(zx_pll->reg_base);
 	writel_relaxed(reg | BIT(zx_pll->pd_bit), zx_pll->reg_base);
 }
diff --git a/drivers/clk/zte/clk.h b/drivers/clk/zte/clk.h
index 84a55a3e2bd4..4df0f121b56d 100644
--- a/drivers/clk/zte/clk.h
+++ b/drivers/clk/zte/clk.h
@@ -66,8 +66,12 @@ struct clk_zx_pll {
 				CLK_GET_RATE_NOCACHE),			\
 }
 
+/*
+ * The pd_bit is not available on ZX296718, so let's pass something
+ * bigger than 31, e.g. 0xff, to indicate that.
+ */
 #define ZX296718_PLL(_name, _parent, _reg, _table)			\
-ZX_PLL(_name, _parent, _reg, _table, 0, 30)
+ZX_PLL(_name, _parent, _reg, _table, 0xff, 30)
 
 struct zx_clk_gate {
 	struct clk_gate gate;
-- 
1.9.1

Re: [PATCH 2/3] zte: clk: pd_bit is not 0 on zx296718

[Jun Nie]

2017-03-21 16:38 GMT+08:00 Shawn Guo <shawnguo@kernel.org>:
> From: Shawn Guo <shawn.guo@linaro.org>
>
> The bit 0 of PLL_CFG0 register is not powerdown on zx296718, but part of
> of postdiv2 field.  The consequence is that functions like hw_to_idx()
> and zx_pll_enable() will end up tampering the postdiv2 of the PLL.
>
> Let's fix it by defining pd_bit 0xff which is obviously invalid for a
> bit position and having PLL driver check the validity before operating
> on the bit.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Reviewed-by: Jun Nie <jun.nie@linaro.org>

[PATCH 2/3] zte: clk: pd_bit is not 0 on zx296718

[Jun Nie]

2017-03-21 16:38 GMT+08:00 Shawn Guo <shawnguo@kernel.org>:
> From: Shawn Guo <shawn.guo@linaro.org>
>
> The bit 0 of PLL_CFG0 register is not powerdown on zx296718, but part of
> of postdiv2 field.  The consequence is that functions like hw_to_idx()
> and zx_pll_enable() will end up tampering the postdiv2 of the PLL.
>
> Let's fix it by defining pd_bit 0xff which is obviously invalid for a
> bit position and having PLL driver check the validity before operating
> on the bit.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Reviewed-by: Jun Nie <jun.nie@linaro.org>

Re: [PATCH 2/3] zte: clk: pd_bit is not 0 on zx296718

[Stephen Boyd]

On 03/21, Shawn Guo wrote:
> From: Shawn Guo <shawn.guo@linaro.org>
> 
> The bit 0 of PLL_CFG0 register is not powerdown on zx296718, but part of
> of postdiv2 field.  The consequence is that functions like hw_to_idx()
> and zx_pll_enable() will end up tampering the postdiv2 of the PLL.
> 
> Let's fix it by defining pd_bit 0xff which is obviously invalid for a
> bit position and having PLL driver check the validity before operating
> on the bit.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 2/3] zte: clk: pd_bit is not 0 on zx296718

[Stephen Boyd]

On 03/21, Shawn Guo wrote:
> From: Shawn Guo <shawn.guo@linaro.org>
> 
> The bit 0 of PLL_CFG0 register is not powerdown on zx296718, but part of
> of postdiv2 field.  The consequence is that functions like hw_to_idx()
> and zx_pll_enable() will end up tampering the postdiv2 of the PLL.
> 
> Let's fix it by defining pd_bit 0xff which is obviously invalid for a
> bit position and having PLL driver check the validity before operating
> on the bit.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 3/3] clk: zte: add pll_vga clock for zx296718

[Shawn Guo]

From: Shawn Guo <shawn.guo@linaro.org>

It adds zx296718 pll_vga clock for VGA support, so that VGA device can
get required pixel rate from clock driver for different display mode.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/zte/clk-zx296718.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/clk/zte/clk-zx296718.c b/drivers/clk/zte/clk-zx296718.c
index f2e1e8b3a8d5..8db0119bc6f7 100644
--- a/drivers/clk/zte/clk-zx296718.c
+++ b/drivers/clk/zte/clk-zx296718.c
@@ -101,6 +101,29 @@
 	PLL_RATE(1600000000, 0x00104221, 0x04aaaaaa),
 };
 
+static struct zx_pll_config pll_vga_table[] = {
+	PLL_RATE(36000000,  0x00102464, 0x04000000), /* 800x600@56 */
+	PLL_RATE(40000000,  0x00102864, 0x04000000), /* 800x600@60 */
+	PLL_RATE(49500000,  0x00103164, 0x04800000), /* 800x600@75 */
+	PLL_RATE(50000000,  0x00103264, 0x04000000), /* 800x600@72 */
+	PLL_RATE(56250000,  0x00103864, 0x04400000), /* 800x600@85 */
+	PLL_RATE(65000000,  0x00104164, 0x04000000), /* 1024x768@60 */
+	PLL_RATE(74375000,  0x00104a64, 0x04600000), /* 1280x720@60 */
+	PLL_RATE(75000000,  0x00104b64, 0x04800000), /* 1024x768@70 */
+	PLL_RATE(78750000,  0x00104e64, 0x04c00000), /* 1024x768@75 */
+	PLL_RATE(85500000,  0x00105564, 0x04800000), /* 1360x768@60 */
+	PLL_RATE(106500000, 0x00106a64, 0x04800000), /* 1440x900@60 */
+	PLL_RATE(108000000, 0x00106c64, 0x04000000), /* 1280x1024@60 */
+	PLL_RATE(110000000, 0x00106e64, 0x04000000), /* 1024x768@85 */
+	PLL_RATE(135000000, 0x00105a44, 0x04000000), /* 1280x1024@75 */
+	PLL_RATE(136750000, 0x00104462, 0x04600000), /* 1440x900@75 */
+	PLL_RATE(148500000, 0x00104a62, 0x04400000), /* 1920x1080@60 */
+	PLL_RATE(157000000, 0x00104e62, 0x04800000), /* 1440x900@85 */
+	PLL_RATE(157500000, 0x00104e62, 0x04c00000), /* 1280x1024@85 */
+	PLL_RATE(162000000, 0x00105162, 0x04000000), /* 1600x1200@60 */
+	PLL_RATE(193250000, 0x00106062, 0x04a00000), /* 1920x1200@60 */
+};
+
 PNAME(osc) = {
 	"osc24m",
 	"osc32k",
@@ -369,6 +392,7 @@
 
 static struct clk_zx_pll zx296718_pll_clk[] = {
 	ZX296718_PLL("pll_cpu",	"osc24m",	PLL_CPU_REG,	pll_cpu_table),
+	ZX296718_PLL("pll_vga",	"osc24m",	PLL_VGA_REG,	pll_vga_table),
 };
 
 static struct zx_clk_fixed_factor top_ffactor_clk[] = {
-- 
1.9.1

[PATCH 3/3] clk: zte: add pll_vga clock for zx296718

[Shawn Guo]

From: Shawn Guo <shawn.guo@linaro.org>

It adds zx296718 pll_vga clock for VGA support, so that VGA device can
get required pixel rate from clock driver for different display mode.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/zte/clk-zx296718.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/clk/zte/clk-zx296718.c b/drivers/clk/zte/clk-zx296718.c
index f2e1e8b3a8d5..8db0119bc6f7 100644
--- a/drivers/clk/zte/clk-zx296718.c
+++ b/drivers/clk/zte/clk-zx296718.c
@@ -101,6 +101,29 @@
 	PLL_RATE(1600000000, 0x00104221, 0x04aaaaaa),
 };
 
+static struct zx_pll_config pll_vga_table[] = {
+	PLL_RATE(36000000,  0x00102464, 0x04000000), /* 800x600 at 56 */
+	PLL_RATE(40000000,  0x00102864, 0x04000000), /* 800x600 at 60 */
+	PLL_RATE(49500000,  0x00103164, 0x04800000), /* 800x600 at 75 */
+	PLL_RATE(50000000,  0x00103264, 0x04000000), /* 800x600 at 72 */
+	PLL_RATE(56250000,  0x00103864, 0x04400000), /* 800x600 at 85 */
+	PLL_RATE(65000000,  0x00104164, 0x04000000), /* 1024x768 at 60 */
+	PLL_RATE(74375000,  0x00104a64, 0x04600000), /* 1280x720 at 60 */
+	PLL_RATE(75000000,  0x00104b64, 0x04800000), /* 1024x768 at 70 */
+	PLL_RATE(78750000,  0x00104e64, 0x04c00000), /* 1024x768 at 75 */
+	PLL_RATE(85500000,  0x00105564, 0x04800000), /* 1360x768 at 60 */
+	PLL_RATE(106500000, 0x00106a64, 0x04800000), /* 1440x900 at 60 */
+	PLL_RATE(108000000, 0x00106c64, 0x04000000), /* 1280x1024 at 60 */
+	PLL_RATE(110000000, 0x00106e64, 0x04000000), /* 1024x768 at 85 */
+	PLL_RATE(135000000, 0x00105a44, 0x04000000), /* 1280x1024 at 75 */
+	PLL_RATE(136750000, 0x00104462, 0x04600000), /* 1440x900 at 75 */
+	PLL_RATE(148500000, 0x00104a62, 0x04400000), /* 1920x1080 at 60 */
+	PLL_RATE(157000000, 0x00104e62, 0x04800000), /* 1440x900 at 85 */
+	PLL_RATE(157500000, 0x00104e62, 0x04c00000), /* 1280x1024 at 85 */
+	PLL_RATE(162000000, 0x00105162, 0x04000000), /* 1600x1200 at 60 */
+	PLL_RATE(193250000, 0x00106062, 0x04a00000), /* 1920x1200 at 60 */
+};
+
 PNAME(osc) = {
 	"osc24m",
 	"osc32k",
@@ -369,6 +392,7 @@
 
 static struct clk_zx_pll zx296718_pll_clk[] = {
 	ZX296718_PLL("pll_cpu",	"osc24m",	PLL_CPU_REG,	pll_cpu_table),
+	ZX296718_PLL("pll_vga",	"osc24m",	PLL_VGA_REG,	pll_vga_table),
 };
 
 static struct zx_clk_fixed_factor top_ffactor_clk[] = {
-- 
1.9.1

Re: [PATCH 3/3] clk: zte: add pll_vga clock for zx296718

[Jun Nie]

2017-03-21 16:38 GMT+08:00 Shawn Guo <shawnguo@kernel.org>:
> From: Shawn Guo <shawn.guo@linaro.org>
>
> It adds zx296718 pll_vga clock for VGA support, so that VGA device can
> get required pixel rate from clock driver for different display mode.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Reviewed-by: Jun Nie <jun.nie@linaro.org>

[PATCH 3/3] clk: zte: add pll_vga clock for zx296718

[Jun Nie]

2017-03-21 16:38 GMT+08:00 Shawn Guo <shawnguo@kernel.org>:
> From: Shawn Guo <shawn.guo@linaro.org>
>
> It adds zx296718 pll_vga clock for VGA support, so that VGA device can
> get required pixel rate from clock driver for different display mode.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Reviewed-by: Jun Nie <jun.nie@linaro.org>

Re: [PATCH 3/3] clk: zte: add pll_vga clock for zx296718

[Stephen Boyd]

On 03/21, Shawn Guo wrote:
> From: Shawn Guo <shawn.guo@linaro.org>
> 
> It adds zx296718 pll_vga clock for VGA support, so that VGA device can
> get required pixel rate from clock driver for different display mode.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 3/3] clk: zte: add pll_vga clock for zx296718

[Stephen Boyd]

On 03/21, Shawn Guo wrote:
> From: Shawn Guo <shawn.guo@linaro.org>
> 
> It adds zx296718 pll_vga clock for VGA support, so that VGA device can
> get required pixel rate from clock driver for different display mode.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project