[PATCH v4 0/5] mtd: mchp23k256: device tree and mchp23lcv1024

[PATCH v4 0/5] mtd: mchp23k256: device tree and mchp23lcv1024

[Chris Packham]

This series adds device tree support to the mchp23k256 driver and
support for the mchp23lcv1024 chip. I suspect there are more compatible
variants that we could now enumerate if desired.

Chris Packham (5):
  mtd: mchp23k256: Add OF device ID table
  mtd: mchp23k256: switch to mtd_device_register()
  mtd: handle partitioning on devices with 0 erasesize
  mtd: mchp23k256: add partitioning support
  mtd: mchp23k256: Add support for mchp23lcv1024

 .../bindings/mtd/microchip,mchp23k256.txt          | 18 +++++
 drivers/mtd/devices/mchp23k256.c                   | 78 ++++++++++++++++++----
 drivers/mtd/mtdpart.c                              | 25 ++++---
 3 files changed, 100 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt

-- 
2.13.0

[PATCH v4 1/5] mtd: mchp23k256: Add OF device ID table

[Chris Packham]

This allows registering of this device via a Device Tree.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
---
Changes in v2:
- collect review/test from Andrew
Changes in v3:
- None
Changes in v4:
- None

 .../devicetree/bindings/mtd/microchip,mchp23k256.txt   | 18 ++++++++++++++++++
 drivers/mtd/devices/mchp23k256.c                       |  8 ++++++++
 2 files changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt

diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
new file mode 100644
index 000000000000..25e5ad38b0f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
@@ -0,0 +1,18 @@
+* MTD SPI driver for Microchip 23K256 (and similar) serial SRAM
+
+Required properties:
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+  representing partitions.
+- compatible : Must be "microchip,mchp23k256"
+- reg : Chip-Select number
+- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
+
+Example:
+
+	spi-sram@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "microchip,mchp23k256";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
index e237db9f1bdb..9d8306a15833 100644
--- a/drivers/mtd/devices/mchp23k256.c
+++ b/drivers/mtd/devices/mchp23k256.c
@@ -19,6 +19,7 @@
 #include <linux/sizes.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
+#include <linux/of_device.h>
 
 struct mchp23k256_flash {
 	struct spi_device	*spi;
@@ -166,9 +167,16 @@ static int mchp23k256_remove(struct spi_device *spi)
 	return mtd_device_unregister(&flash->mtd);
 }
 
+static const struct of_device_id mchp23k256_of_table[] = {
+	{ .compatible = "microchip,mchp23k256" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mchp23k256_of_table);
+
 static struct spi_driver mchp23k256_driver = {
 	.driver = {
 		.name	= "mchp23k256",
+		.of_match_table = of_match_ptr(mchp23k256_of_table),
 	},
 	.probe		= mchp23k256_probe,
 	.remove		= mchp23k256_remove,
-- 
2.13.0

[PATCH v4 1/5] mtd: mchp23k256: Add OF device ID table

[Chris Packham]

This allows registering of this device via a Device Tree.

Signed-off-by: Chris Packham <chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>
Reviewed-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Tested-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
---
Changes in v2:
- collect review/test from Andrew
Changes in v3:
- None
Changes in v4:
- None

 .../devicetree/bindings/mtd/microchip,mchp23k256.txt   | 18 ++++++++++++++++++
 drivers/mtd/devices/mchp23k256.c                       |  8 ++++++++
 2 files changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt

diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
new file mode 100644
index 000000000000..25e5ad38b0f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
@@ -0,0 +1,18 @@
+* MTD SPI driver for Microchip 23K256 (and similar) serial SRAM
+
+Required properties:
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+  representing partitions.
+- compatible : Must be "microchip,mchp23k256"
+- reg : Chip-Select number
+- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
+
+Example:
+
+	spi-sram@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "microchip,mchp23k256";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
index e237db9f1bdb..9d8306a15833 100644
--- a/drivers/mtd/devices/mchp23k256.c
+++ b/drivers/mtd/devices/mchp23k256.c
@@ -19,6 +19,7 @@
 #include <linux/sizes.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
+#include <linux/of_device.h>
 
 struct mchp23k256_flash {
 	struct spi_device	*spi;
@@ -166,9 +167,16 @@ static int mchp23k256_remove(struct spi_device *spi)
 	return mtd_device_unregister(&flash->mtd);
 }
 
+static const struct of_device_id mchp23k256_of_table[] = {
+	{ .compatible = "microchip,mchp23k256" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mchp23k256_of_table);
+
 static struct spi_driver mchp23k256_driver = {
 	.driver = {
 		.name	= "mchp23k256",
+		.of_match_table = of_match_ptr(mchp23k256_of_table),
 	},
 	.probe		= mchp23k256_probe,
 	.remove		= mchp23k256_remove,
-- 
2.13.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 1/5] mtd: mchp23k256: Add OF device ID table

[Boris Brezillon]

On Thu, 25 May 2017 11:49:12 +1200
Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:

> This allows registering of this device via a Device Tree.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Tested-by: Andrew Lunn <andrew@lunn.ch>

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> ---
> Changes in v2:
> - collect review/test from Andrew
> Changes in v3:
> - None
> Changes in v4:
> - None
> 
>  .../devicetree/bindings/mtd/microchip,mchp23k256.txt   | 18 ++++++++++++++++++
>  drivers/mtd/devices/mchp23k256.c                       |  8 ++++++++
>  2 files changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> new file mode 100644
> index 000000000000..25e5ad38b0f0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> @@ -0,0 +1,18 @@
> +* MTD SPI driver for Microchip 23K256 (and similar) serial SRAM
> +
> +Required properties:
> +- #address-cells, #size-cells : Must be present if the device has sub-nodes
> +  representing partitions.
> +- compatible : Must be "microchip,mchp23k256"
> +- reg : Chip-Select number
> +- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
> +
> +Example:
> +
> +	spi-sram@0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "microchip,mchp23k256";
> +		reg = <0>;
> +		spi-max-frequency = <20000000>;
> +	};
> diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
> index e237db9f1bdb..9d8306a15833 100644
> --- a/drivers/mtd/devices/mchp23k256.c
> +++ b/drivers/mtd/devices/mchp23k256.c
> @@ -19,6 +19,7 @@
>  #include <linux/sizes.h>
>  #include <linux/spi/flash.h>
>  #include <linux/spi/spi.h>
> +#include <linux/of_device.h>
>  
>  struct mchp23k256_flash {
>  	struct spi_device	*spi;
> @@ -166,9 +167,16 @@ static int mchp23k256_remove(struct spi_device *spi)
>  	return mtd_device_unregister(&flash->mtd);
>  }
>  
> +static const struct of_device_id mchp23k256_of_table[] = {
> +	{ .compatible = "microchip,mchp23k256" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, mchp23k256_of_table);
> +
>  static struct spi_driver mchp23k256_driver = {
>  	.driver = {
>  		.name	= "mchp23k256",
> +		.of_match_table = of_match_ptr(mchp23k256_of_table),
>  	},
>  	.probe		= mchp23k256_probe,
>  	.remove		= mchp23k256_remove,

Re: [PATCH v4 1/5] mtd: mchp23k256: Add OF device ID table

[Boris Brezillon]

On Thu, 25 May 2017 11:49:12 +1200
Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:

> This allows registering of this device via a Device Tree.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Tested-by: Andrew Lunn <andrew@lunn.ch>

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> ---
> Changes in v2:
> - collect review/test from Andrew
> Changes in v3:
> - None
> Changes in v4:
> - None
> 
>  .../devicetree/bindings/mtd/microchip,mchp23k256.txt   | 18 ++++++++++++++++++
>  drivers/mtd/devices/mchp23k256.c                       |  8 ++++++++
>  2 files changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> new file mode 100644
> index 000000000000..25e5ad38b0f0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> @@ -0,0 +1,18 @@
> +* MTD SPI driver for Microchip 23K256 (and similar) serial SRAM
> +
> +Required properties:
> +- #address-cells, #size-cells : Must be present if the device has sub-nodes
> +  representing partitions.
> +- compatible : Must be "microchip,mchp23k256"
> +- reg : Chip-Select number
> +- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
> +
> +Example:
> +
> +	spi-sram@0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "microchip,mchp23k256";
> +		reg = <0>;
> +		spi-max-frequency = <20000000>;
> +	};
> diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
> index e237db9f1bdb..9d8306a15833 100644
> --- a/drivers/mtd/devices/mchp23k256.c
> +++ b/drivers/mtd/devices/mchp23k256.c
> @@ -19,6 +19,7 @@
>  #include <linux/sizes.h>
>  #include <linux/spi/flash.h>
>  #include <linux/spi/spi.h>
> +#include <linux/of_device.h>
>  
>  struct mchp23k256_flash {
>  	struct spi_device	*spi;
> @@ -166,9 +167,16 @@ static int mchp23k256_remove(struct spi_device *spi)
>  	return mtd_device_unregister(&flash->mtd);
>  }
>  
> +static const struct of_device_id mchp23k256_of_table[] = {
> +	{ .compatible = "microchip,mchp23k256" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, mchp23k256_of_table);
> +
>  static struct spi_driver mchp23k256_driver = {
>  	.driver = {
>  		.name	= "mchp23k256",
> +		.of_match_table = of_match_ptr(mchp23k256_of_table),
>  	},
>  	.probe		= mchp23k256_probe,
>  	.remove		= mchp23k256_remove,


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 1/5] mtd: mchp23k256: Add OF device ID table

[Rob Herring]

On Thu, May 25, 2017 at 11:49:12AM +1200, Chris Packham wrote:
> This allows registering of this device via a Device Tree.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Tested-by: Andrew Lunn <andrew@lunn.ch>
> ---
> Changes in v2:
> - collect review/test from Andrew
> Changes in v3:
> - None
> Changes in v4:
> - None
> 
>  .../devicetree/bindings/mtd/microchip,mchp23k256.txt   | 18 ++++++++++++++++++
>  drivers/mtd/devices/mchp23k256.c                       |  8 ++++++++
>  2 files changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v4 2/5] mtd: mchp23k256: switch to mtd_device_register()

[Chris Packham]

Use mtd_device_register() instead of mtd_device_parse_register() to
eliminate two unused parameters.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
---
Changes in v2
- collect review/test from Andrew
Changes in v3:
- None
Changes in v4:
- None

 drivers/mtd/devices/mchp23k256.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
index 9d8306a15833..2542f5b8b63f 100644
--- a/drivers/mtd/devices/mchp23k256.c
+++ b/drivers/mtd/devices/mchp23k256.c
@@ -151,9 +151,8 @@ static int mchp23k256_probe(struct spi_device *spi)
 	flash->mtd._read	= mchp23k256_read;
 	flash->mtd._write	= mchp23k256_write;
 
-	err = mtd_device_parse_register(&flash->mtd, NULL, NULL,
-					data ? data->parts : NULL,
-					data ? data->nr_parts : 0);
+	err = mtd_device_register(&flash->mtd, data ? data->parts : NULL,
+				  data ? data->nr_parts : 0);
 	if (err)
 		return err;
 
-- 
2.13.0

Re: [PATCH v4 2/5] mtd: mchp23k256: switch to mtd_device_register()

[Boris Brezillon]

On Thu, 25 May 2017 11:49:13 +1200
Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:

> Use mtd_device_register() instead of mtd_device_parse_register() to
> eliminate two unused parameters.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Tested-by: Andrew Lunn <andrew@lunn.ch>

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> ---
> Changes in v2
> - collect review/test from Andrew
> Changes in v3:
> - None
> Changes in v4:
> - None
> 
>  drivers/mtd/devices/mchp23k256.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
> index 9d8306a15833..2542f5b8b63f 100644
> --- a/drivers/mtd/devices/mchp23k256.c
> +++ b/drivers/mtd/devices/mchp23k256.c
> @@ -151,9 +151,8 @@ static int mchp23k256_probe(struct spi_device *spi)
>  	flash->mtd._read	= mchp23k256_read;
>  	flash->mtd._write	= mchp23k256_write;
>  
> -	err = mtd_device_parse_register(&flash->mtd, NULL, NULL,
> -					data ? data->parts : NULL,
> -					data ? data->nr_parts : 0);
> +	err = mtd_device_register(&flash->mtd, data ? data->parts : NULL,
> +				  data ? data->nr_parts : 0);
>  	if (err)
>  		return err;
>  

[PATCH v4 3/5] mtd: handle partitioning on devices with 0 erasesize

[Chris Packham]

erasesize is meaningful for flash devices but for SRAM there is no
concept of an erase block so erasesize is set to 0. When partitioning
these devices instead of ensuring partitions fall on erasesize
boundaries we ensure they fall on writesize boundaries.

Helped-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Changes in v3:
- new
Changes in v4:
- None

 drivers/mtd/mtdpart.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index ea5e5307f667..5cef1247806c 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -393,8 +393,11 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
 			const struct mtd_partition *part, int partno,
 			uint64_t cur_offset)
 {
+	int wr_alignment = master->erasesize ? : master->writesize;
 	struct mtd_part *slave;
+	u32 remainder;
 	char *name;
+	u64 tmp;
 
 	/* allocate the partition structure */
 	slave = kzalloc(sizeof(*slave), GFP_KERNEL);
@@ -499,10 +502,11 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
 	if (slave->offset == MTDPART_OFS_APPEND)
 		slave->offset = cur_offset;
 	if (slave->offset == MTDPART_OFS_NXTBLK) {
+		tmp = cur_offset;
 		slave->offset = cur_offset;
-		if (mtd_mod_by_eb(cur_offset, master) != 0) {
-			/* Round up to next erasesize */
-			slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize;
+		remainder = do_div(tmp, wr_alignment);
+		if (remainder) {
+			slave->offset += wr_alignment - remainder;
 			printk(KERN_NOTICE "Moving partition %d: "
 			       "0x%012llx -> 0x%012llx\n", partno,
 			       (unsigned long long)cur_offset, (unsigned long long)slave->offset);
@@ -567,19 +571,22 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
 		slave->mtd.erasesize = master->erasesize;
 	}
 
-	if ((slave->mtd.flags & MTD_WRITEABLE) &&
-	    mtd_mod_by_eb(slave->offset, &slave->mtd)) {
+	tmp = slave->offset;
+	remainder = do_div(tmp, wr_alignment);
+	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
 		/* Doesn't start on a boundary of major erase size */
 		/* FIXME: Let it be writable if it is on a boundary of
 		 * _minor_ erase size though */
 		slave->mtd.flags &= ~MTD_WRITEABLE;
-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
 			part->name);
 	}
-	if ((slave->mtd.flags & MTD_WRITEABLE) &&
-	    mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
+
+	tmp = slave->mtd.size;
+	remainder = do_div(tmp, wr_alignment);
+	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
 		slave->mtd.flags &= ~MTD_WRITEABLE;
-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
 			part->name);
 	}
 
-- 
2.13.0

Re: [PATCH v4 3/5] mtd: handle partitioning on devices with 0 erasesize

[Boris Brezillon]

On Thu, 25 May 2017 11:49:14 +1200
Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:

> erasesize is meaningful for flash devices but for SRAM there is no
> concept of an erase block so erasesize is set to 0. When partitioning
> these devices instead of ensuring partitions fall on erasesize
> boundaries we ensure they fall on writesize boundaries.
> 
> Helped-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> ---
> Changes in v3:
> - new
> Changes in v4:
> - None
> 
>  drivers/mtd/mtdpart.c | 25 ++++++++++++++++---------
>  1 file changed, 16 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
> index ea5e5307f667..5cef1247806c 100644
> --- a/drivers/mtd/mtdpart.c
> +++ b/drivers/mtd/mtdpart.c
> @@ -393,8 +393,11 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
>  			const struct mtd_partition *part, int partno,
>  			uint64_t cur_offset)
>  {
> +	int wr_alignment = master->erasesize ? : master->writesize;
>  	struct mtd_part *slave;
> +	u32 remainder;
>  	char *name;
> +	u64 tmp;
>  
>  	/* allocate the partition structure */
>  	slave = kzalloc(sizeof(*slave), GFP_KERNEL);
> @@ -499,10 +502,11 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
>  	if (slave->offset == MTDPART_OFS_APPEND)
>  		slave->offset = cur_offset;
>  	if (slave->offset == MTDPART_OFS_NXTBLK) {
> +		tmp = cur_offset;
>  		slave->offset = cur_offset;
> -		if (mtd_mod_by_eb(cur_offset, master) != 0) {
> -			/* Round up to next erasesize */
> -			slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize;
> +		remainder = do_div(tmp, wr_alignment);
> +		if (remainder) {
> +			slave->offset += wr_alignment - remainder;
>  			printk(KERN_NOTICE "Moving partition %d: "
>  			       "0x%012llx -> 0x%012llx\n", partno,
>  			       (unsigned long long)cur_offset, (unsigned long long)slave->offset);
> @@ -567,19 +571,22 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
>  		slave->mtd.erasesize = master->erasesize;
>  	}
>  
> -	if ((slave->mtd.flags & MTD_WRITEABLE) &&
> -	    mtd_mod_by_eb(slave->offset, &slave->mtd)) {
> +	tmp = slave->offset;
> +	remainder = do_div(tmp, wr_alignment);
> +	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
>  		/* Doesn't start on a boundary of major erase size */
>  		/* FIXME: Let it be writable if it is on a boundary of
>  		 * _minor_ erase size though */
>  		slave->mtd.flags &= ~MTD_WRITEABLE;
> -		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
> +		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
>  			part->name);
>  	}
> -	if ((slave->mtd.flags & MTD_WRITEABLE) &&
> -	    mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
> +
> +	tmp = slave->mtd.size;
> +	remainder = do_div(tmp, wr_alignment);
> +	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
>  		slave->mtd.flags &= ~MTD_WRITEABLE;
> -		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
> +		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
>  			part->name);
>  	}
>  

[PATCH v4 4/5] mtd: mchp23k256: add partitioning support

[Chris Packham]

Setting the of_node for the mtd device allows the generic mtd code to
setup the partitions. Additionally we must specify a non-zero erasesize
for the partitions to be writeable.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
---
Changes in v2
- collect revew/test from Andrew
Changes in v3:
- remove setting of erasesize
Changes in v4:
- none

 drivers/mtd/devices/mchp23k256.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
index 2542f5b8b63f..3e5feb454644 100644
--- a/drivers/mtd/devices/mchp23k256.c
+++ b/drivers/mtd/devices/mchp23k256.c
@@ -143,6 +143,7 @@ static int mchp23k256_probe(struct spi_device *spi)
 
 	data = dev_get_platdata(&spi->dev);
 
+	mtd_set_of_node(&flash->mtd, spi->dev.of_node);
 	flash->mtd.dev.parent	= &spi->dev;
 	flash->mtd.type		= MTD_RAM;
 	flash->mtd.flags	= MTD_CAP_RAM;
-- 
2.13.0

Re: [PATCH v4 4/5] mtd: mchp23k256: add partitioning support

[Boris Brezillon]

On Thu, 25 May 2017 11:49:15 +1200
Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:

> Setting the of_node for the mtd device allows the generic mtd code to
> setup the partitions. Additionally we must specify a non-zero erasesize
> for the partitions to be writeable.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Tested-by: Andrew Lunn <andrew@lunn.ch>

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> ---
> Changes in v2
> - collect revew/test from Andrew
> Changes in v3:
> - remove setting of erasesize
> Changes in v4:
> - none
> 
>  drivers/mtd/devices/mchp23k256.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
> index 2542f5b8b63f..3e5feb454644 100644
> --- a/drivers/mtd/devices/mchp23k256.c
> +++ b/drivers/mtd/devices/mchp23k256.c
> @@ -143,6 +143,7 @@ static int mchp23k256_probe(struct spi_device *spi)
>  
>  	data = dev_get_platdata(&spi->dev);
>  
> +	mtd_set_of_node(&flash->mtd, spi->dev.of_node);
>  	flash->mtd.dev.parent	= &spi->dev;
>  	flash->mtd.type		= MTD_RAM;
>  	flash->mtd.flags	= MTD_CAP_RAM;

Re: [PATCH v4 4/5] mtd: mchp23k256: add partitioning support

[Brian Norris]

On Thu, May 25, 2017 at 11:49:15AM +1200, Chris Packham wrote:
> Setting the of_node for the mtd device allows the generic mtd code to
> setup the partitions. Additionally we must specify a non-zero erasesize
> for the partitions to be writeable.

The last sentence here is no longer applicable.

[PATCH v4 5/5] mtd: mchp23k256: Add support for mchp23lcv1024

[Chris Packham]

The mchp23lcv1024 is similar to the mchp23k256, the differences (from a
software point of view) are the capacity of the chip and the size of the
addresses used.

There is no way to detect the specific chip so we must be told via a
Device Tree or default to mchp23k256 when device tree is not used.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Changes in v2:
- fix formatting in switch statement
- add support for 24-bit addressing
Changes in v3:
- None
Changes in v4:
- reword commit message (thanks Andrew)
- introduce mchp23_caps struct (thanks Boris)

 .../bindings/mtd/microchip,mchp23k256.txt          |  2 +-
 drivers/mtd/devices/mchp23k256.c                   | 66 ++++++++++++++++++----
 2 files changed, 57 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
index 25e5ad38b0f0..7328eb92a03c 100644
--- a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
+++ b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
@@ -3,7 +3,7 @@
 Required properties:
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
   representing partitions.
-- compatible : Must be "microchip,mchp23k256"
+- compatible : Must be one of "microchip,mchp23k256" or "microchip,mchp23lcv1024"
 - reg : Chip-Select number
 - spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
 
diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
index 3e5feb454644..8956b7dcc984 100644
--- a/drivers/mtd/devices/mchp23k256.c
+++ b/drivers/mtd/devices/mchp23k256.c
@@ -21,10 +21,18 @@
 #include <linux/spi/spi.h>
 #include <linux/of_device.h>
 
+#define MAX_CMD_SIZE		4
+
+struct mchp23_caps {
+	u8 addr_width;
+	unsigned int size;
+};
+
 struct mchp23k256_flash {
 	struct spi_device	*spi;
 	struct mutex		lock;
 	struct mtd_info		mtd;
+	const struct mchp23_caps	*caps;
 };
 
 #define MCHP23K256_CMD_WRITE_STATUS	0x01
@@ -34,22 +42,40 @@ struct mchp23k256_flash {
 
 #define to_mchp23k256_flash(x) container_of(x, struct mchp23k256_flash, mtd)
 
+static void mchp23k256_addr2cmd(struct mchp23k256_flash *flash,
+				unsigned int addr, u8 *cmd)
+{
+	int i;
+
+	/*
+	 * Address is sent in big endian (MSB first) and we skip
+	 * the first entry of the cmd array which contains the cmd
+	 * opcode.
+	 */
+	for (i = flash->caps->addr_width; i > 0; i--, addr >>= 8)
+		cmd[i] = addr;
+}
+
+static int mchp23k256_cmdsz(struct mchp23k256_flash *flash)
+{
+	return 1 + flash->caps->addr_width;
+}
+
 static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len,
 			    size_t *retlen, const unsigned char *buf)
 {
 	struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
 	struct spi_transfer transfer[2] = {};
 	struct spi_message message;
-	unsigned char command[3];
+	unsigned char command[MAX_CMD_SIZE];
 
 	spi_message_init(&message);
 
 	command[0] = MCHP23K256_CMD_WRITE;
-	command[1] = to >> 8;
-	command[2] = to;
+	mchp23k256_addr2cmd(flash, to, command);
 
 	transfer[0].tx_buf = command;
-	transfer[0].len = sizeof(command);
+	transfer[0].len = mchp23k256_cmdsz(flash);
 	spi_message_add_tail(&transfer[0], &message);
 
 	transfer[1].tx_buf = buf;
@@ -73,17 +99,16 @@ static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len,
 	struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
 	struct spi_transfer transfer[2] = {};
 	struct spi_message message;
-	unsigned char command[3];
+	unsigned char command[MAX_CMD_SIZE];
 
 	spi_message_init(&message);
 
 	memset(&transfer, 0, sizeof(transfer));
 	command[0] = MCHP23K256_CMD_READ;
-	command[1] = from >> 8;
-	command[2] = from;
+	mchp23k256_addr2cmd(flash, from, command);
 
 	transfer[0].tx_buf = command;
-	transfer[0].len = sizeof(command);
+	transfer[0].len = mchp23k256_cmdsz(flash);
 	spi_message_add_tail(&transfer[0], &message);
 
 	transfer[1].rx_buf = buf;
@@ -123,6 +148,16 @@ static int mchp23k256_set_mode(struct spi_device *spi)
 	return spi_sync(spi, &message);
 }
 
+static const struct mchp23_caps mchp23k256_caps = {
+	.size = SZ_32K,
+	.addr_width = 2,
+};
+
+static const struct mchp23_caps mchp23lcv1024_caps = {
+	.size = SZ_128K,
+	.addr_width = 3,
+};
+
 static int mchp23k256_probe(struct spi_device *spi)
 {
 	struct mchp23k256_flash *flash;
@@ -143,12 +178,16 @@ static int mchp23k256_probe(struct spi_device *spi)
 
 	data = dev_get_platdata(&spi->dev);
 
+	flash->caps = of_device_get_match_data(&spi->dev);
+	if (!flash->caps)
+		flash->caps = &mchp23k256_caps;
+
 	mtd_set_of_node(&flash->mtd, spi->dev.of_node);
 	flash->mtd.dev.parent	= &spi->dev;
 	flash->mtd.type		= MTD_RAM;
 	flash->mtd.flags	= MTD_CAP_RAM;
 	flash->mtd.writesize	= 1;
-	flash->mtd.size		= SZ_32K;
+	flash->mtd.size		= flash->caps->size;
 	flash->mtd._read	= mchp23k256_read;
 	flash->mtd._write	= mchp23k256_write;
 
@@ -168,7 +207,14 @@ static int mchp23k256_remove(struct spi_device *spi)
 }
 
 static const struct of_device_id mchp23k256_of_table[] = {
-	{ .compatible = "microchip,mchp23k256" },
+	{
+		.compatible = "microchip,mchp23k256",
+		.data = &mchp23k256_caps,
+	},
+	{
+		.compatible = "microchip,mchp23lcv1024",
+		.data = &mchp23lcv1024_caps,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, mchp23k256_of_table);
-- 
2.13.0

Re: [PATCH v4 5/5] mtd: mchp23k256: Add support for mchp23lcv1024

[Boris Brezillon]

On Thu, 25 May 2017 11:49:16 +1200
Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:

> The mchp23lcv1024 is similar to the mchp23k256, the differences (from a
> software point of view) are the capacity of the chip and the size of the
> addresses used.
> 
> There is no way to detect the specific chip so we must be told via a
> Device Tree or default to mchp23k256 when device tree is not used.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> ---
> Changes in v2:
> - fix formatting in switch statement
> - add support for 24-bit addressing
> Changes in v3:
> - None
> Changes in v4:
> - reword commit message (thanks Andrew)
> - introduce mchp23_caps struct (thanks Boris)
> 
>  .../bindings/mtd/microchip,mchp23k256.txt          |  2 +-
>  drivers/mtd/devices/mchp23k256.c                   | 66 ++++++++++++++++++----
>  2 files changed, 57 insertions(+), 11 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> index 25e5ad38b0f0..7328eb92a03c 100644
> --- a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> +++ b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> @@ -3,7 +3,7 @@
>  Required properties:
>  - #address-cells, #size-cells : Must be present if the device has sub-nodes
>    representing partitions.
> -- compatible : Must be "microchip,mchp23k256"
> +- compatible : Must be one of "microchip,mchp23k256" or "microchip,mchp23lcv1024"
>  - reg : Chip-Select number
>  - spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
>  
> diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
> index 3e5feb454644..8956b7dcc984 100644
> --- a/drivers/mtd/devices/mchp23k256.c
> +++ b/drivers/mtd/devices/mchp23k256.c
> @@ -21,10 +21,18 @@
>  #include <linux/spi/spi.h>
>  #include <linux/of_device.h>
>  
> +#define MAX_CMD_SIZE		4
> +
> +struct mchp23_caps {
> +	u8 addr_width;
> +	unsigned int size;
> +};
> +
>  struct mchp23k256_flash {
>  	struct spi_device	*spi;
>  	struct mutex		lock;
>  	struct mtd_info		mtd;
> +	const struct mchp23_caps	*caps;
>  };
>  
>  #define MCHP23K256_CMD_WRITE_STATUS	0x01
> @@ -34,22 +42,40 @@ struct mchp23k256_flash {
>  
>  #define to_mchp23k256_flash(x) container_of(x, struct mchp23k256_flash, mtd)
>  
> +static void mchp23k256_addr2cmd(struct mchp23k256_flash *flash,
> +				unsigned int addr, u8 *cmd)
> +{
> +	int i;
> +
> +	/*
> +	 * Address is sent in big endian (MSB first) and we skip
> +	 * the first entry of the cmd array which contains the cmd
> +	 * opcode.
> +	 */
> +	for (i = flash->caps->addr_width; i > 0; i--, addr >>= 8)
> +		cmd[i] = addr;
> +}
> +
> +static int mchp23k256_cmdsz(struct mchp23k256_flash *flash)
> +{
> +	return 1 + flash->caps->addr_width;
> +}
> +
>  static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len,
>  			    size_t *retlen, const unsigned char *buf)
>  {
>  	struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
>  	struct spi_transfer transfer[2] = {};
>  	struct spi_message message;
> -	unsigned char command[3];
> +	unsigned char command[MAX_CMD_SIZE];
>  
>  	spi_message_init(&message);
>  
>  	command[0] = MCHP23K256_CMD_WRITE;
> -	command[1] = to >> 8;
> -	command[2] = to;
> +	mchp23k256_addr2cmd(flash, to, command);
>  
>  	transfer[0].tx_buf = command;
> -	transfer[0].len = sizeof(command);
> +	transfer[0].len = mchp23k256_cmdsz(flash);
>  	spi_message_add_tail(&transfer[0], &message);
>  
>  	transfer[1].tx_buf = buf;
> @@ -73,17 +99,16 @@ static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len,
>  	struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
>  	struct spi_transfer transfer[2] = {};
>  	struct spi_message message;
> -	unsigned char command[3];
> +	unsigned char command[MAX_CMD_SIZE];
>  
>  	spi_message_init(&message);
>  
>  	memset(&transfer, 0, sizeof(transfer));
>  	command[0] = MCHP23K256_CMD_READ;
> -	command[1] = from >> 8;
> -	command[2] = from;
> +	mchp23k256_addr2cmd(flash, from, command);
>  
>  	transfer[0].tx_buf = command;
> -	transfer[0].len = sizeof(command);
> +	transfer[0].len = mchp23k256_cmdsz(flash);
>  	spi_message_add_tail(&transfer[0], &message);
>  
>  	transfer[1].rx_buf = buf;
> @@ -123,6 +148,16 @@ static int mchp23k256_set_mode(struct spi_device *spi)
>  	return spi_sync(spi, &message);
>  }
>  
> +static const struct mchp23_caps mchp23k256_caps = {
> +	.size = SZ_32K,
> +	.addr_width = 2,
> +};
> +
> +static const struct mchp23_caps mchp23lcv1024_caps = {
> +	.size = SZ_128K,
> +	.addr_width = 3,
> +};
> +
>  static int mchp23k256_probe(struct spi_device *spi)
>  {
>  	struct mchp23k256_flash *flash;
> @@ -143,12 +178,16 @@ static int mchp23k256_probe(struct spi_device *spi)
>  
>  	data = dev_get_platdata(&spi->dev);
>  
> +	flash->caps = of_device_get_match_data(&spi->dev);
> +	if (!flash->caps)
> +		flash->caps = &mchp23k256_caps;
> +
>  	mtd_set_of_node(&flash->mtd, spi->dev.of_node);
>  	flash->mtd.dev.parent	= &spi->dev;
>  	flash->mtd.type		= MTD_RAM;
>  	flash->mtd.flags	= MTD_CAP_RAM;
>  	flash->mtd.writesize	= 1;
> -	flash->mtd.size		= SZ_32K;
> +	flash->mtd.size		= flash->caps->size;
>  	flash->mtd._read	= mchp23k256_read;
>  	flash->mtd._write	= mchp23k256_write;
>  
> @@ -168,7 +207,14 @@ static int mchp23k256_remove(struct spi_device *spi)
>  }
>  
>  static const struct of_device_id mchp23k256_of_table[] = {
> -	{ .compatible = "microchip,mchp23k256" },
> +	{
> +		.compatible = "microchip,mchp23k256",
> +		.data = &mchp23k256_caps,
> +	},
> +	{
> +		.compatible = "microchip,mchp23lcv1024",
> +		.data = &mchp23lcv1024_caps,
> +	},
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, mchp23k256_of_table);

Re: [PATCH v4 5/5] mtd: mchp23k256: Add support for mchp23lcv1024

[Boris Brezillon]

On Thu, 25 May 2017 11:49:16 +1200
Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:

> The mchp23lcv1024 is similar to the mchp23k256, the differences (from a
> software point of view) are the capacity of the chip and the size of the
> addresses used.
> 
> There is no way to detect the specific chip so we must be told via a
> Device Tree or default to mchp23k256 when device tree is not used.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> ---
> Changes in v2:
> - fix formatting in switch statement
> - add support for 24-bit addressing
> Changes in v3:
> - None
> Changes in v4:
> - reword commit message (thanks Andrew)
> - introduce mchp23_caps struct (thanks Boris)
> 
>  .../bindings/mtd/microchip,mchp23k256.txt          |  2 +-
>  drivers/mtd/devices/mchp23k256.c                   | 66 ++++++++++++++++++----
>  2 files changed, 57 insertions(+), 11 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> index 25e5ad38b0f0..7328eb92a03c 100644
> --- a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> +++ b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> @@ -3,7 +3,7 @@
>  Required properties:
>  - #address-cells, #size-cells : Must be present if the device has sub-nodes
>    representing partitions.
> -- compatible : Must be "microchip,mchp23k256"
> +- compatible : Must be one of "microchip,mchp23k256" or "microchip,mchp23lcv1024"
>  - reg : Chip-Select number
>  - spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
>  
> diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
> index 3e5feb454644..8956b7dcc984 100644
> --- a/drivers/mtd/devices/mchp23k256.c
> +++ b/drivers/mtd/devices/mchp23k256.c
> @@ -21,10 +21,18 @@
>  #include <linux/spi/spi.h>
>  #include <linux/of_device.h>
>  
> +#define MAX_CMD_SIZE		4
> +
> +struct mchp23_caps {
> +	u8 addr_width;
> +	unsigned int size;
> +};
> +
>  struct mchp23k256_flash {
>  	struct spi_device	*spi;
>  	struct mutex		lock;
>  	struct mtd_info		mtd;
> +	const struct mchp23_caps	*caps;
>  };
>  
>  #define MCHP23K256_CMD_WRITE_STATUS	0x01
> @@ -34,22 +42,40 @@ struct mchp23k256_flash {
>  
>  #define to_mchp23k256_flash(x) container_of(x, struct mchp23k256_flash, mtd)
>  
> +static void mchp23k256_addr2cmd(struct mchp23k256_flash *flash,
> +				unsigned int addr, u8 *cmd)
> +{
> +	int i;
> +
> +	/*
> +	 * Address is sent in big endian (MSB first) and we skip
> +	 * the first entry of the cmd array which contains the cmd
> +	 * opcode.
> +	 */
> +	for (i = flash->caps->addr_width; i > 0; i--, addr >>= 8)
> +		cmd[i] = addr;
> +}
> +
> +static int mchp23k256_cmdsz(struct mchp23k256_flash *flash)
> +{
> +	return 1 + flash->caps->addr_width;
> +}
> +
>  static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len,
>  			    size_t *retlen, const unsigned char *buf)
>  {
>  	struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
>  	struct spi_transfer transfer[2] = {};
>  	struct spi_message message;
> -	unsigned char command[3];
> +	unsigned char command[MAX_CMD_SIZE];
>  
>  	spi_message_init(&message);
>  
>  	command[0] = MCHP23K256_CMD_WRITE;
> -	command[1] = to >> 8;
> -	command[2] = to;
> +	mchp23k256_addr2cmd(flash, to, command);
>  
>  	transfer[0].tx_buf = command;
> -	transfer[0].len = sizeof(command);
> +	transfer[0].len = mchp23k256_cmdsz(flash);
>  	spi_message_add_tail(&transfer[0], &message);
>  
>  	transfer[1].tx_buf = buf;
> @@ -73,17 +99,16 @@ static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len,
>  	struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
>  	struct spi_transfer transfer[2] = {};
>  	struct spi_message message;
> -	unsigned char command[3];
> +	unsigned char command[MAX_CMD_SIZE];
>  
>  	spi_message_init(&message);
>  
>  	memset(&transfer, 0, sizeof(transfer));
>  	command[0] = MCHP23K256_CMD_READ;
> -	command[1] = from >> 8;
> -	command[2] = from;
> +	mchp23k256_addr2cmd(flash, from, command);
>  
>  	transfer[0].tx_buf = command;
> -	transfer[0].len = sizeof(command);
> +	transfer[0].len = mchp23k256_cmdsz(flash);
>  	spi_message_add_tail(&transfer[0], &message);
>  
>  	transfer[1].rx_buf = buf;
> @@ -123,6 +148,16 @@ static int mchp23k256_set_mode(struct spi_device *spi)
>  	return spi_sync(spi, &message);
>  }
>  
> +static const struct mchp23_caps mchp23k256_caps = {
> +	.size = SZ_32K,
> +	.addr_width = 2,
> +};
> +
> +static const struct mchp23_caps mchp23lcv1024_caps = {
> +	.size = SZ_128K,
> +	.addr_width = 3,
> +};
> +
>  static int mchp23k256_probe(struct spi_device *spi)
>  {
>  	struct mchp23k256_flash *flash;
> @@ -143,12 +178,16 @@ static int mchp23k256_probe(struct spi_device *spi)
>  
>  	data = dev_get_platdata(&spi->dev);
>  
> +	flash->caps = of_device_get_match_data(&spi->dev);
> +	if (!flash->caps)
> +		flash->caps = &mchp23k256_caps;
> +
>  	mtd_set_of_node(&flash->mtd, spi->dev.of_node);
>  	flash->mtd.dev.parent	= &spi->dev;
>  	flash->mtd.type		= MTD_RAM;
>  	flash->mtd.flags	= MTD_CAP_RAM;
>  	flash->mtd.writesize	= 1;
> -	flash->mtd.size		= SZ_32K;
> +	flash->mtd.size		= flash->caps->size;
>  	flash->mtd._read	= mchp23k256_read;
>  	flash->mtd._write	= mchp23k256_write;
>  
> @@ -168,7 +207,14 @@ static int mchp23k256_remove(struct spi_device *spi)
>  }
>  
>  static const struct of_device_id mchp23k256_of_table[] = {
> -	{ .compatible = "microchip,mchp23k256" },
> +	{
> +		.compatible = "microchip,mchp23k256",
> +		.data = &mchp23k256_caps,
> +	},
> +	{
> +		.compatible = "microchip,mchp23lcv1024",
> +		.data = &mchp23lcv1024_caps,
> +	},
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, mchp23k256_of_table);


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 5/5] mtd: mchp23k256: Add support for mchp23lcv1024

[Rob Herring]

On Thu, May 25, 2017 at 11:49:16AM +1200, Chris Packham wrote:
> The mchp23lcv1024 is similar to the mchp23k256, the differences (from a
> software point of view) are the capacity of the chip and the size of the
> addresses used.
> 
> There is no way to detect the specific chip so we must be told via a
> Device Tree or default to mchp23k256 when device tree is not used.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> ---
> Changes in v2:
> - fix formatting in switch statement
> - add support for 24-bit addressing
> Changes in v3:
> - None
> Changes in v4:
> - reword commit message (thanks Andrew)
> - introduce mchp23_caps struct (thanks Boris)
> 
>  .../bindings/mtd/microchip,mchp23k256.txt          |  2 +-

I'd rather see a single binding patch than split like this, but it's 
fine.

Acked-by: Rob Herring <robh@kernel.org>

>  drivers/mtd/devices/mchp23k256.c                   | 66 ++++++++++++++++++----
>  2 files changed, 57 insertions(+), 11 deletions(-)

Re: [PATCH v4 5/5] mtd: mchp23k256: Add support for mchp23lcv1024

[Rob Herring]

On Thu, May 25, 2017 at 11:49:16AM +1200, Chris Packham wrote:
> The mchp23lcv1024 is similar to the mchp23k256, the differences (from a
> software point of view) are the capacity of the chip and the size of the
> addresses used.
> 
> There is no way to detect the specific chip so we must be told via a
> Device Tree or default to mchp23k256 when device tree is not used.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> ---
> Changes in v2:
> - fix formatting in switch statement
> - add support for 24-bit addressing
> Changes in v3:
> - None
> Changes in v4:
> - reword commit message (thanks Andrew)
> - introduce mchp23_caps struct (thanks Boris)
> 
>  .../bindings/mtd/microchip,mchp23k256.txt          |  2 +-

I'd rather see a single binding patch than split like this, but it's 
fine.

Acked-by: Rob Herring <robh@kernel.org>

>  drivers/mtd/devices/mchp23k256.c                   | 66 ++++++++++++++++++----
>  2 files changed, 57 insertions(+), 11 deletions(-)

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v4 0/5] mtd: mchp23k256: device tree and mchp23lcv1024

[Brian Norris]

On Thu, May 25, 2017 at 11:49:11AM +1200, Chris Packham wrote:
> This series adds device tree support to the mchp23k256 driver and
> support for the mchp23lcv1024 chip. I suspect there are more compatible
> variants that we could now enumerate if desired.
> 
> Chris Packham (5):
>   mtd: mchp23k256: Add OF device ID table
>   mtd: mchp23k256: switch to mtd_device_register()

Applied these two to l2-mtd.git.

>   mtd: handle partitioning on devices with 0 erasesize

I had a question on this one (posted on an earlier revision).

>   mtd: mchp23k256: add partitioning support
>   mtd: mchp23k256: Add support for mchp23lcv1024
> 
>  .../bindings/mtd/microchip,mchp23k256.txt          | 18 +++++
>  drivers/mtd/devices/mchp23k256.c                   | 78 ++++++++++++++++++----
>  drivers/mtd/mtdpart.c                              | 25 ++++---
>  3 files changed, 100 insertions(+), 21 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt

Holding off on patches 3-5 for now.