[PATCH 7/9] net: mvmdio: add xmdio support

[antoine.tenart@free-electrons.com (Antoine Tenart)]

Hi Andrew,

On Wed, Jun 07, 2017 at 02:12:05PM +0200, Andrew Lunn wrote:
> On Wed, Jun 07, 2017 at 10:38:08AM +0200, Antoine Tenart wrote:
> > This patch adds the xMDIO interface support in the mvmdio driver. This
> > interface is used in Ethernet controllers on Marvell 370, 7k and 8k (as
> > of now). The xSMI interface supported by this driver complies with the
> > IEEE 802.3 clause 45 (while the SMI interface complies with the clause
> > 22). The xSMI interface is used by 10GbE devices.
> 
> I've only take a quick look, but i don't see anywhere you look at the
> register address and see if it has MII_ADDR_C45 to determine if a C45
> transaction should be done, or a C22. The MDIO bus can have a mix of
> C45 and C22 devices on it, and you need to use the correct transaction
> type depending on the target device/address.

So this could be dynamic and not based on the compatible. I'll try this
and see if it can work.

Thanks!

-- 
Antoine T?nart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170607/a008eb2c/attachment.sig>