[PATCH] iio: pressure: st_pressure_spi: add OF capability to st_pressure_spi

[PATCH] iio: pressure: st_pressure_spi: add OF capability to st_pressure_spi

[Lorenzo Bianconi]

Add device tree support for LPS22HB pressure sensor

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
---
 drivers/iio/pressure/st_pressure_spi.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index 550508025af1..6dde7cc3e999 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -18,6 +18,19 @@
 #include <linux/iio/common/st_sensors_spi.h>
 #include "st_pressure.h"
 
+#ifdef CONFIG_OF
+static const struct of_device_id st_press_of_match[] = {
+	{
+		.compatible = "st,lps22hb-press",
+		.data = LPS22HB_PRESS_DEV_NAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_press_of_match);
+#else
+#define st_press_of_match	NULL
+#endif
+
 static int st_press_spi_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
@@ -30,6 +43,8 @@ static int st_press_spi_probe(struct spi_device *spi)
 
 	press_data = iio_priv(indio_dev);
 
+	st_sensors_of_name_probe(&spi->dev, st_press_of_match,
+				 spi->modalias, sizeof(spi->modalias));
 	st_sensors_spi_configure(indio_dev, spi, press_data);
 
 	err = st_press_common_probe(indio_dev);
@@ -58,6 +73,7 @@ MODULE_DEVICE_TABLE(spi, st_press_id_table);
 static struct spi_driver st_press_driver = {
 	.driver = {
 		.name = "st-press-spi",
+		.of_match_table = of_match_ptr(st_press_of_match),
 	},
 	.probe = st_press_spi_probe,
 	.remove = st_press_spi_remove,
-- 
2.13.1

Re: [PATCH] iio: pressure: st_pressure_spi: add OF capability to st_pressure_spi

[Jonathan Cameron]

On Thu, 22 Jun 2017 19:57:42 +0200
Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote:

> Add device tree support for LPS22HB pressure sensor
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
> ---
>  drivers/iio/pressure/st_pressure_spi.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
> index 550508025af1..6dde7cc3e999 100644
> --- a/drivers/iio/pressure/st_pressure_spi.c
> +++ b/drivers/iio/pressure/st_pressure_spi.c
> @@ -18,6 +18,19 @@
>  #include <linux/iio/common/st_sensors_spi.h>
>  #include "st_pressure.h"
>  
> +#ifdef CONFIG_OF
> +static const struct of_device_id st_press_of_match[] = {
> +	{
> +		.compatible = "st,lps22hb-press",
Rob requested the other day that we don't do this sort
of naming.  That particular discussion was about a dual
chip package. Here as far as I can tell the lsp22hb is
only ever a simple pressure sensor.  Hence can we drop the
-press? 
If we need to have it for backwards compatibility then
perhaps both is the way to go with the press version clearly
marked as deprecated.
> +		.data = LPS22HB_PRESS_DEV_NAME,
> +	},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, st_press_of_match);
> +#else
> +#define st_press_of_match	NULL
> +#endif
> +
>  static int st_press_spi_probe(struct spi_device *spi)
>  {
>  	struct iio_dev *indio_dev;
> @@ -30,6 +43,8 @@ static int st_press_spi_probe(struct spi_device *spi)
>  
>  	press_data = iio_priv(indio_dev);
>  
> +	st_sensors_of_name_probe(&spi->dev, st_press_of_match,
> +				 spi->modalias, sizeof(spi->modalias));
>  	st_sensors_spi_configure(indio_dev, spi, press_data);
>  
>  	err = st_press_common_probe(indio_dev);
> @@ -58,6 +73,7 @@ MODULE_DEVICE_TABLE(spi, st_press_id_table);
>  static struct spi_driver st_press_driver = {
>  	.driver = {
>  		.name = "st-press-spi",
> +		.of_match_table = of_match_ptr(st_press_of_match),
>  	},
>  	.probe = st_press_spi_probe,
>  	.remove = st_press_spi_remove,