From: linux-kernel-dev@beckhoff.com (linux-kernel-dev at beckhoff.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/2] Add CX9020 device tree
Date: Thu, 13 Jul 2017 13:04:11 +0200 [thread overview]
Message-ID: <20170713110413.12721-1-linux-kernel-dev@beckhoff.com> (raw)
In-Reply-To: <20170712090408.12212-1-linux-kernel-dev@beckhoff.com>
From: Patrick Bruenn <p.bruenn@beckhoff.com>
Add device tree for Beckhoff CX9020 Embedded PC.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Patrick Bruenn (2):
ARM: dts: imx: add CX9020 Embedded PC device tree
drm/panel: simple: Add support for ddc-only panel
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx53-cx9020.dts | 370 +++++++++++++++++++++++++++++++++++
drivers/gpu/drm/panel/panel-simple.c | 6 +
3 files changed, 377 insertions(+)
create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: <linux-kernel-dev@beckhoff.com>
To: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list:DRM PANEL DRIVERS" <dri-devel@lists.freedesktop.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
Patrick Bruenn <p.bruenn@beckhoff.com>,
David Airlie <airlied@linux.ie>,
Russell King <linux@armlinux.org.uk>,
open list <linux-kernel@vger.kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
Sascha Hauer <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
Shawn Guo <shawnguo@kernel.org>,
"moderated list:ARM PORT" <linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v2 0/2] Add CX9020 device tree
Date: Thu, 13 Jul 2017 13:04:11 +0200 [thread overview]
Message-ID: <20170713110413.12721-1-linux-kernel-dev@beckhoff.com> (raw)
In-Reply-To: <20170712090408.12212-1-linux-kernel-dev@beckhoff.com>
From: Patrick Bruenn <p.bruenn@beckhoff.com>
Add device tree for Beckhoff CX9020 Embedded PC.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Patrick Bruenn (2):
ARM: dts: imx: add CX9020 Embedded PC device tree
drm/panel: simple: Add support for ddc-only panel
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx53-cx9020.dts | 370 +++++++++++++++++++++++++++++++++++
drivers/gpu/drm/panel/panel-simple.c | 6 +
3 files changed, 377 insertions(+)
create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: <linux-kernel-dev@beckhoff.com>
To: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list:DRM PANEL DRIVERS" <dri-devel@lists.freedesktop.org>
Cc: Patrick Bruenn <p.bruenn@beckhoff.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <kernel@pengutronix.de>,
Thierry Reding <thierry.reding@gmail.com>,
David Airlie <airlied@linux.ie>,
Fabio Estevam <fabio.estevam@nxp.com>,
"moderated list:ARM PORT" <linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 0/2] Add CX9020 device tree
Date: Thu, 13 Jul 2017 13:04:11 +0200 [thread overview]
Message-ID: <20170713110413.12721-1-linux-kernel-dev@beckhoff.com> (raw)
In-Reply-To: <20170712090408.12212-1-linux-kernel-dev@beckhoff.com>
From: Patrick Bruenn <p.bruenn@beckhoff.com>
Add device tree for Beckhoff CX9020 Embedded PC.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Patrick Bruenn (2):
ARM: dts: imx: add CX9020 Embedded PC device tree
drm/panel: simple: Add support for ddc-only panel
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx53-cx9020.dts | 370 +++++++++++++++++++++++++++++++++++
drivers/gpu/drm/panel/panel-simple.c | 6 +
3 files changed, 377 insertions(+)
create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts
--
2.11.0
next prev parent reply other threads:[~2017-07-13 11:04 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-12 9:04 [PATCH] ARM: dts: imx: add CX9020 Embedded PC device tree linux-kernel-dev at beckhoff.com
2017-07-12 9:04 ` linux-kernel-dev
2017-07-12 9:04 ` linux-kernel-dev
2017-07-12 9:46 ` Mark Rutland
2017-07-12 9:46 ` Mark Rutland
2017-07-12 9:46 ` Mark Rutland
2017-07-12 11:46 ` Patrick Brünn
2017-07-12 11:46 ` Patrick Brünn
2017-07-12 11:46 ` Patrick Brünn
2017-07-12 14:42 ` Andrew Lunn
2017-07-12 14:42 ` Andrew Lunn
2017-07-12 14:42 ` Andrew Lunn
2017-07-13 3:00 ` Patrick Brünn
2017-07-13 3:00 ` Patrick Brünn
2017-07-13 3:00 ` Patrick Brünn
2017-07-13 11:04 ` linux-kernel-dev at beckhoff.com [this message]
2017-07-13 11:04 ` [PATCH v2 0/2] Add CX9020 " linux-kernel-dev
2017-07-13 11:04 ` linux-kernel-dev
2017-07-13 11:04 ` [PATCH v2 1/2] ARM: dts: imx: add CX9020 Embedded PC " linux-kernel-dev at beckhoff.com
2017-07-13 11:04 ` linux-kernel-dev
2017-07-13 11:04 ` [PATCH v2 2/2] drm/panel: simple: Add support for ddc-only panel linux-kernel-dev
2017-07-14 14:15 ` Rob Herring
2017-07-14 14:15 ` Rob Herring
2017-07-13 11:13 ` [PATCH v3 0/2] Add CX9020 device tree linux-kernel-dev at beckhoff.com
2017-07-13 11:13 ` linux-kernel-dev
2017-07-13 11:13 ` linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w
2017-07-13 11:13 ` [PATCH v3 1/2] ARM: dts: imx: add CX9020 Embedded PC " linux-kernel-dev at beckhoff.com
2017-07-13 11:13 ` linux-kernel-dev
2017-07-14 2:16 ` Shawn Guo
2017-07-14 2:16 ` Shawn Guo
2017-07-14 2:16 ` Shawn Guo
2017-07-13 11:13 ` [PATCH v3 2/2] drm/panel: simple: Add support for ddc-only panel linux-kernel-dev
2017-07-21 4:06 ` [PATCH v4 0/2] ARM: dts: imx: add CX9020 Embedded PC device tree linux-kernel-dev at beckhoff.com
2017-07-21 4:06 ` linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w
[not found] ` <20170721040640.31424-1-linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w@public.gmane.org>
2017-07-21 4:06 ` [PATCH v4 1/2] dt-bindings: arm: Add entry for Beckhoff CX9020 linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w
2017-07-21 4:06 ` linux-kernel-dev
[not found] ` <20170721040640.31424-2-linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w@public.gmane.org>
2017-07-24 20:28 ` Rob Herring
2017-07-24 20:28 ` Rob Herring
2017-07-21 4:06 ` [PATCH v4 2/2] ARM: dts: imx: add CX9020 Embedded PC device tree linux-kernel-dev at beckhoff.com
2017-07-21 4:06 ` linux-kernel-dev
2017-07-21 4:06 ` linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w
2017-07-25 7:59 ` Shawn Guo
2017-07-25 7:59 ` Shawn Guo
2017-07-25 7:59 ` Shawn Guo
2017-07-25 11:41 ` Patrick Brünn
2017-07-25 11:41 ` Patrick Brünn
2017-07-25 13:17 ` Shawn Guo
2017-07-25 13:17 ` Shawn Guo
2017-07-25 13:17 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170713110413.12721-1-linux-kernel-dev@beckhoff.com \
--to=linux-kernel-dev@beckhoff.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.