All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	lorenzo.bianconi@st.com
Subject: Re: [PATCH v2 04/10] iio: humidity: hts221: avoid useless ODR reconfiguration
Date: Sat, 22 Jul 2017 21:19:23 +0100	[thread overview]
Message-ID: <20170722211923.031cb54b@kernel.org> (raw)
In-Reply-To: <20170717173905.8209-5-lorenzo.bianconi@st.com>

On Mon, 17 Jul 2017 19:38:59 +0200
Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote:

> Configure sensor ODR just in hts221_write_raw() in order to avoid
> to set device sample rate multiple times.
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Applied to the togreg branch of iio.git and pushed out as
testing for the autobuilders to play with it.

Thanks,

Jonathan
> ---
>  drivers/iio/humidity/hts221_core.c | 17 ++++++++---------
>  1 file changed, 8 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/iio/humidity/hts221_core.c b/drivers/iio/humidity/hts221_core.c
> index 6e5847386a45..f99adc44139e 100644
> --- a/drivers/iio/humidity/hts221_core.c
> +++ b/drivers/iio/humidity/hts221_core.c
> @@ -208,11 +208,6 @@ static int hts221_update_odr(struct hts221_hw *hw, u8 odr)
>  	if (err < 0)
>  		return err;
>  
> -	err = hts221_write_with_mask(hw, HTS221_REG_CNTRL1_ADDR,
> -				     HTS221_ENABLE_MASK, 1);
> -	if (err < 0)
> -		return err;
> -
>  	hw->odr = odr;
>  
>  	return 0;
> @@ -294,7 +289,8 @@ int hts221_power_on(struct hts221_hw *hw)
>  {
>  	int err;
>  
> -	err = hts221_update_odr(hw, hw->odr);
> +	err = hts221_write_with_mask(hw, HTS221_REG_CNTRL1_ADDR,
> +				     HTS221_ENABLE_MASK, true);
>  	if (err < 0)
>  		return err;
>  
> @@ -627,8 +623,6 @@ int hts221_probe(struct iio_dev *iio_dev)
>  	if (err < 0)
>  		return err;
>  
> -	hw->odr = hts221_odr_table[0].hz;
> -
>  	iio_dev->modes = INDIO_DIRECT_MODE;
>  	iio_dev->dev.parent = hw->dev;
>  	iio_dev->available_scan_masks = hts221_scan_masks;
> @@ -643,6 +637,10 @@ int hts221_probe(struct iio_dev *iio_dev)
>  	if (err < 0)
>  		return err;
>  
> +	err = hts221_update_odr(hw, hts221_odr_table[0].hz);
> +	if (err < 0)
> +		return err;
> +
>  	/* configure humidity sensor */
>  	err = hts221_parse_rh_caldata(hw);
>  	if (err < 0) {
> @@ -706,7 +704,8 @@ static int __maybe_unused hts221_resume(struct device *dev)
>  	int err = 0;
>  
>  	if (hw->enabled)
> -		err = hts221_update_odr(hw, hw->odr);
> +		err = hts221_write_with_mask(hw, HTS221_REG_CNTRL1_ADDR,
> +					     HTS221_ENABLE_MASK, true);
>  
>  	return err;
>  }


WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Lorenzo Bianconi
	<lorenzo.bianconi83-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	lorenzo.bianconi-qxv4g6HH51o@public.gmane.org
Subject: Re: [PATCH v2 04/10] iio: humidity: hts221: avoid useless ODR reconfiguration
Date: Sat, 22 Jul 2017 21:19:23 +0100	[thread overview]
Message-ID: <20170722211923.031cb54b@kernel.org> (raw)
In-Reply-To: <20170717173905.8209-5-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>

On Mon, 17 Jul 2017 19:38:59 +0200
Lorenzo Bianconi <lorenzo.bianconi83-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:

> Configure sensor ODR just in hts221_write_raw() in order to avoid
> to set device sample rate multiple times.
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>
Applied to the togreg branch of iio.git and pushed out as
testing for the autobuilders to play with it.

Thanks,

Jonathan
> ---
>  drivers/iio/humidity/hts221_core.c | 17 ++++++++---------
>  1 file changed, 8 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/iio/humidity/hts221_core.c b/drivers/iio/humidity/hts221_core.c
> index 6e5847386a45..f99adc44139e 100644
> --- a/drivers/iio/humidity/hts221_core.c
> +++ b/drivers/iio/humidity/hts221_core.c
> @@ -208,11 +208,6 @@ static int hts221_update_odr(struct hts221_hw *hw, u8 odr)
>  	if (err < 0)
>  		return err;
>  
> -	err = hts221_write_with_mask(hw, HTS221_REG_CNTRL1_ADDR,
> -				     HTS221_ENABLE_MASK, 1);
> -	if (err < 0)
> -		return err;
> -
>  	hw->odr = odr;
>  
>  	return 0;
> @@ -294,7 +289,8 @@ int hts221_power_on(struct hts221_hw *hw)
>  {
>  	int err;
>  
> -	err = hts221_update_odr(hw, hw->odr);
> +	err = hts221_write_with_mask(hw, HTS221_REG_CNTRL1_ADDR,
> +				     HTS221_ENABLE_MASK, true);
>  	if (err < 0)
>  		return err;
>  
> @@ -627,8 +623,6 @@ int hts221_probe(struct iio_dev *iio_dev)
>  	if (err < 0)
>  		return err;
>  
> -	hw->odr = hts221_odr_table[0].hz;
> -
>  	iio_dev->modes = INDIO_DIRECT_MODE;
>  	iio_dev->dev.parent = hw->dev;
>  	iio_dev->available_scan_masks = hts221_scan_masks;
> @@ -643,6 +637,10 @@ int hts221_probe(struct iio_dev *iio_dev)
>  	if (err < 0)
>  		return err;
>  
> +	err = hts221_update_odr(hw, hts221_odr_table[0].hz);
> +	if (err < 0)
> +		return err;
> +
>  	/* configure humidity sensor */
>  	err = hts221_parse_rh_caldata(hw);
>  	if (err < 0) {
> @@ -706,7 +704,8 @@ static int __maybe_unused hts221_resume(struct device *dev)
>  	int err = 0;
>  
>  	if (hw->enabled)
> -		err = hts221_update_odr(hw, hw->odr);
> +		err = hts221_write_with_mask(hw, HTS221_REG_CNTRL1_ADDR,
> +					     HTS221_ENABLE_MASK, true);
>  
>  	return err;
>  }

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2017-07-22 20:19 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-17 17:38 [PATCH v2 00/10] hts221: add new features and fix power-off procedure Lorenzo Bianconi
2017-07-17 17:38 ` Lorenzo Bianconi
2017-07-17 17:38 ` [PATCH v2 01/10] iio: humidity: hts221: refactor write_with_mask code Lorenzo Bianconi
2017-07-17 17:38   ` Lorenzo Bianconi
2017-07-22 17:57   ` Jonathan Cameron
2017-07-22 17:57     ` Jonathan Cameron
2017-07-17 17:38 ` [PATCH v2 02/10] iio: humidity: hts221: move BDU configuration in probe routine Lorenzo Bianconi
2017-07-17 17:38   ` Lorenzo Bianconi
2017-07-22 17:58   ` Jonathan Cameron
2017-07-22 17:58     ` Jonathan Cameron
2017-07-17 17:38 ` [PATCH v2 03/10] iio: humidity: hts221: do not overwrite reserved data during power-down Lorenzo Bianconi
2017-07-17 17:38   ` Lorenzo Bianconi
2017-07-22 18:02   ` Jonathan Cameron
2017-07-22 18:02     ` Jonathan Cameron
2017-08-11 19:54     ` Lorenzo Bianconi
2017-08-12 11:07       ` Jonathan Cameron
2017-08-12 16:28         ` Lorenzo Bianconi
2017-07-17 17:38 ` [PATCH v2 04/10] iio: humidity: hts221: avoid useless ODR reconfiguration Lorenzo Bianconi
2017-07-17 17:38   ` Lorenzo Bianconi
2017-07-22 20:19   ` Jonathan Cameron [this message]
2017-07-22 20:19     ` Jonathan Cameron
2017-07-17 17:39 ` [PATCH v2 05/10] iio: humidity: hts221: squash hts221_power_on/off in hts221_set_enable Lorenzo Bianconi
2017-07-17 17:39   ` Lorenzo Bianconi
2017-07-22 20:21   ` Jonathan Cameron
2017-07-22 20:21     ` Jonathan Cameron
2017-07-17 17:39 ` [PATCH v2 06/10] iio: humidity: hts221: support active-low interrupts Lorenzo Bianconi
2017-07-17 17:39   ` Lorenzo Bianconi
2017-07-22 20:22   ` Jonathan Cameron
2017-07-22 20:22     ` Jonathan Cameron
2017-07-17 17:39 ` [PATCH v2 07/10] dt-bindings: " Lorenzo Bianconi
2017-07-17 17:39   ` Lorenzo Bianconi
2017-07-22 20:23   ` Jonathan Cameron
2017-07-22 20:23     ` Jonathan Cameron
2017-07-17 17:39 ` [PATCH v2 08/10] iio: humidity: hts221: support open drain mode Lorenzo Bianconi
2017-07-17 17:39   ` Lorenzo Bianconi
2017-07-22 20:25   ` Jonathan Cameron
2017-07-22 20:25     ` Jonathan Cameron
2017-07-25 19:01     ` Jonathan Cameron
2017-07-25 19:01       ` Jonathan Cameron
2017-07-17 17:39 ` [PATCH v2 09/10] dt-bindings: " Lorenzo Bianconi
2017-07-17 17:39   ` Lorenzo Bianconi
2017-07-24 17:48   ` Rob Herring
2017-07-24 17:48     ` Rob Herring
2017-07-25 19:02     ` Jonathan Cameron
2017-07-25 19:02       ` Jonathan Cameron
2017-07-17 17:39 ` [PATCH v2 10/10] iio: humidity: hts221: move drdy enable logic in hts221_trig_set_state() Lorenzo Bianconi
2017-07-17 17:39   ` Lorenzo Bianconi
2017-07-25 19:03   ` Jonathan Cameron
2017-07-25 19:03     ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170722211923.031cb54b@kernel.org \
    --to=jic23@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=lorenzo.bianconi83@gmail.com \
    --cc=lorenzo.bianconi@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.