Re: [PATCH v2 07/10] dt-bindings: iio: humidity: hts221: support active-low interrupts

[Jonathan Cameron <jic23@kernel.org>]

On Mon, 17 Jul 2017 19:39:02 +0200
Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote:

> Update hts221 device binding with active-low interrupts support
> (IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_EDGE_FALLING).
> 
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Applied to the togreg branch of iio.git and pushed out as
testing for the autobuilders to play with it.

thanks,

Jonathan
> ---
>  Documentation/devicetree/bindings/iio/humidity/hts221.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/humidity/hts221.txt b/Documentation/devicetree/bindings/iio/humidity/hts221.txt
> index b20ab9c12080..fca263e13400 100644
> --- a/Documentation/devicetree/bindings/iio/humidity/hts221.txt
> +++ b/Documentation/devicetree/bindings/iio/humidity/hts221.txt
> @@ -7,7 +7,8 @@ Required properties:
>  Optional properties:
>  - interrupt-parent: should be the phandle for the interrupt controller
>  - interrupts: interrupt mapping for IRQ. It should be configured with
> -  flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING.
> +  flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
> +  IRQ_TYPE_EDGE_FALLING.
>  
>    Refer to interrupt-controller/interrupts.txt for generic interrupt
>    client node bindings.