From: Willy Tarreau <w@1wt.eu>
To: Miquel RAYNAL <miquel.raynal@free-electrons.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
Robert Jarzmik <robert.jarzmik@free.fr>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: pxa3xx_nand times out in 4.14 with JFFS2
Date: Mon, 18 Dec 2017 08:06:17 +0100 [thread overview]
Message-ID: <20171218070617.GA16559@1wt.eu> (raw)
In-Reply-To: <20171218063715.GA20461@1wt.eu>
On Mon, Dec 18, 2017 at 07:37:15AM +0100, Willy Tarreau wrote:
> > As Boris said, we would really welcome a test of this branch, because
> > you almost have the same setup as Sean in the thread "pxa3xx: wait time
> > out when scanning for bb" and I am running out of explanation for his
> > problem unless it is related to U-Boot. So if you could try booting
> > with and without the on-flash-bbt property and report whether it fails
> > or not it would be of great help!
>
> Yes, I noticed your work mentionned in some of the threads I've read
> during my troubleshooting session and considered giving it a try. I'll
> probably do this next week-end.
Finally I figured the test was quick enough and could help you, so I
built and booted it, I'm getting this at boot :
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1023 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1022 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1021 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1020 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1019 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1018 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1017 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1016 bad
No space left to write bad block table
nand_bbt: error while writing bad block table -28
marvell-nfc f10d0000.nand-controller: nand_scan_tail failed: -28
marvell-nfc: probe of f10d0000.nand-controller failed with error -28
Then no MTD appears in /proc/mtd.
Hoping this helps,
Willy
WARNING: multiple messages have this Message-ID (diff)
From: w@1wt.eu (Willy Tarreau)
To: linux-arm-kernel@lists.infradead.org
Subject: pxa3xx_nand times out in 4.14 with JFFS2
Date: Mon, 18 Dec 2017 08:06:17 +0100 [thread overview]
Message-ID: <20171218070617.GA16559@1wt.eu> (raw)
In-Reply-To: <20171218063715.GA20461@1wt.eu>
On Mon, Dec 18, 2017 at 07:37:15AM +0100, Willy Tarreau wrote:
> > As Boris said, we would really welcome a test of this branch, because
> > you almost have the same setup as Sean in the thread "pxa3xx: wait time
> > out when scanning for bb" and I am running out of explanation for his
> > problem unless it is related to U-Boot. So if you could try booting
> > with and without the on-flash-bbt property and report whether it fails
> > or not it would be of great help!
>
> Yes, I noticed your work mentionned in some of the threads I've read
> during my troubleshooting session and considered giving it a try. I'll
> probably do this next week-end.
Finally I figured the test was quick enough and could help you, so I
built and booted it, I'm getting this at boot :
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1023 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1022 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1021 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1020 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1019 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1018 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1017 bad
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error while writing BBT block -110
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
marvell-nfc f10d0000.nand-controller: Timeout waiting for RB signal
nand_bbt: error -110 while marking block 1016 bad
No space left to write bad block table
nand_bbt: error while writing bad block table -28
marvell-nfc f10d0000.nand-controller: nand_scan_tail failed: -28
marvell-nfc: probe of f10d0000.nand-controller failed with error -28
Then no MTD appears in /proc/mtd.
Hoping this helps,
Willy
next prev parent reply other threads:[~2017-12-18 7:06 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-17 12:05 pxa3xx_nand times out in 4.14 with JFFS2 Willy Tarreau
2017-12-17 12:05 ` Willy Tarreau
2017-12-17 12:33 ` Boris Brezillon
2017-12-17 12:33 ` Boris Brezillon
2017-12-17 13:17 ` Willy Tarreau
2017-12-17 13:17 ` Willy Tarreau
2017-12-17 14:25 ` Ezequiel Garcia
2017-12-17 14:25 ` Ezequiel Garcia
2017-12-17 14:27 ` Ezequiel Garcia
2017-12-17 14:27 ` Ezequiel Garcia
2017-12-17 14:53 ` Boris Brezillon
2017-12-17 14:53 ` Boris Brezillon
2017-12-17 15:00 ` Willy Tarreau
2017-12-17 15:00 ` Willy Tarreau
2017-12-17 15:09 ` Willy Tarreau
2017-12-17 15:09 ` Willy Tarreau
2017-12-17 15:53 ` Ezequiel Garcia
2017-12-17 15:53 ` Ezequiel Garcia
2017-12-17 16:23 ` Willy Tarreau
2017-12-17 16:23 ` Willy Tarreau
2017-12-17 18:07 ` Boris Brezillon
2017-12-17 18:07 ` Boris Brezillon
2017-12-17 19:00 ` Willy Tarreau
2017-12-17 19:00 ` Willy Tarreau
2017-12-17 21:01 ` Ezequiel Garcia
2017-12-17 21:01 ` Ezequiel Garcia
2017-12-17 21:16 ` Willy Tarreau
2017-12-17 21:16 ` Willy Tarreau
2017-12-17 21:26 ` Boris Brezillon
2017-12-17 21:26 ` Boris Brezillon
2017-12-17 21:46 ` Miquel RAYNAL
2017-12-17 21:46 ` Miquel RAYNAL
2017-12-18 6:37 ` Willy Tarreau
2017-12-18 6:37 ` Willy Tarreau
2017-12-18 7:06 ` Willy Tarreau [this message]
2017-12-18 7:06 ` Willy Tarreau
2017-12-18 10:22 ` Miquel RAYNAL
2017-12-18 10:22 ` Miquel RAYNAL
2017-12-18 21:52 ` Willy Tarreau
2017-12-18 21:52 ` Willy Tarreau
2017-12-19 0:13 ` Miquel RAYNAL
2017-12-19 0:13 ` Miquel RAYNAL
2017-12-19 5:34 ` Willy Tarreau
2017-12-19 5:34 ` Willy Tarreau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171218070617.GA16559@1wt.eu \
--to=w@1wt.eu \
--cc=boris.brezillon@free-electrons.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@free-electrons.com \
--cc=robert.jarzmik@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.