All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [PATCH v2 01/15] eal: introduce atomic exchange operation
Date: Fri,  5 Jan 2018 17:06:42 -0800	[thread overview]
Message-ID: <20180106010656.9167-2-stephen@networkplumber.org> (raw)
In-Reply-To: <20180106010656.9167-1-stephen@networkplumber.org>

To handle atomic update of link status (64 bit), every driver
was doing its own version using cmpset.
Atomic exchange is a useful primitive in its own right;
therefore make it a EAL routine.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 .../common/include/arch/x86/rte_atomic.h           | 24 +++++++
 .../common/include/arch/x86/rte_atomic_32.h        | 12 ++++
 .../common/include/arch/x86/rte_atomic_64.h        | 12 ++++
 lib/librte_eal/common/include/generic/rte_atomic.h | 78 ++++++++++++++++++++++
 4 files changed, 126 insertions(+)

diff --git a/lib/librte_eal/common/include/arch/x86/rte_atomic.h b/lib/librte_eal/common/include/arch/x86/rte_atomic.h
index 8469f97e193a..20d10cc18e4e 100644
--- a/lib/librte_eal/common/include/arch/x86/rte_atomic.h
+++ b/lib/librte_eal/common/include/arch/x86/rte_atomic.h
@@ -59,6 +59,18 @@ rte_atomic16_cmpset(volatile uint16_t *dst, uint16_t exp, uint16_t src)
 	return res;
 }
 
+static inline uint16_t
+rte_atomic16_exchange(volatile uint16_t *dst, uint16_t val)
+{
+	asm volatile(
+			MPLOCKED
+			"xchgw %0, %1;"
+			: "=r" (val), "=m" (*dst)
+			: "0" (val),  "m" (*dst)
+			: "memory");         /* no-clobber list */
+	return val;
+}
+
 static inline int rte_atomic16_test_and_set(rte_atomic16_t *v)
 {
 	return rte_atomic16_cmpset((volatile uint16_t *)&v->cnt, 0, 1);
@@ -133,6 +145,18 @@ rte_atomic32_cmpset(volatile uint32_t *dst, uint32_t exp, uint32_t src)
 	return res;
 }
 
+static inline uint32_t
+rte_atomic32_exchange(volatile uint32_t *dst, uint32_t val)
+{
+	asm volatile(
+			MPLOCKED
+			"xchgl %0, %1;"
+			: "=r" (val), "=m" (*dst)
+			: "0" (val),  "m" (*dst)
+			: "memory");         /* no-clobber list */
+	return val;
+}
+
 static inline int rte_atomic32_test_and_set(rte_atomic32_t *v)
 {
 	return rte_atomic32_cmpset((volatile uint32_t *)&v->cnt, 0, 1);
diff --git a/lib/librte_eal/common/include/arch/x86/rte_atomic_32.h b/lib/librte_eal/common/include/arch/x86/rte_atomic_32.h
index fb3abf187998..43fa59355ac5 100644
--- a/lib/librte_eal/common/include/arch/x86/rte_atomic_32.h
+++ b/lib/librte_eal/common/include/arch/x86/rte_atomic_32.h
@@ -98,6 +98,18 @@ rte_atomic64_cmpset(volatile uint64_t *dst, uint64_t exp, uint64_t src)
 	return res;
 }
 
+static inline uint64_t
+rte_atomic64_exchange(volatile uint64_t *dest, uint64_t val)
+{
+	uint64_t old;
+
+	do {
+		old = *dest;
+	} while (rte_atomic64_t_cmpset(dest, old, val));
+
+	return old;
+}
+
 static inline void
 rte_atomic64_init(rte_atomic64_t *v)
 {
diff --git a/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h b/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h
index 1a53a766bd72..fd2ec9c53796 100644
--- a/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h
+++ b/lib/librte_eal/common/include/arch/x86/rte_atomic_64.h
@@ -71,6 +71,18 @@ rte_atomic64_cmpset(volatile uint64_t *dst, uint64_t exp, uint64_t src)
 	return res;
 }
 
+static inline uint64_t
+rte_atomic64_exchange(volatile uint64_t *dst, uint64_t val)
+{
+	asm volatile(
+			MPLOCKED
+			"xchgq %0, %1;"
+			: "=r" (val), "=m" (*dst)
+			: "0" (val),  "m" (*dst)
+			: "memory");         /* no-clobber list */
+	return val;
+}
+
 static inline void
 rte_atomic64_init(rte_atomic64_t *v)
 {
diff --git a/lib/librte_eal/common/include/generic/rte_atomic.h b/lib/librte_eal/common/include/generic/rte_atomic.h
index 16af5ca57e01..97854df3d134 100644
--- a/lib/librte_eal/common/include/generic/rte_atomic.h
+++ b/lib/librte_eal/common/include/generic/rte_atomic.h
@@ -139,6 +139,32 @@ rte_atomic16_cmpset(volatile uint16_t *dst, uint16_t exp, uint16_t src)
 }
 #endif
 
+/**
+ * Atomic exchange.
+ *
+ * (atomic) equivalent to:
+ *   ret = *dst
+ *   *dst = val;
+ *   return ret;
+ *
+ * @param dst
+ *   The destination location into which the value will be written.
+ * @param val
+ *   The new value.
+ * @return
+ *   The original value at that location
+ */
+static inline uint16_t
+rte_atomic16_exchange(volatile uint16_t *dst, uint16_t val);
+
+#ifdef RTE_FORCE_INTRINSICS
+static inline uint16_t
+rte_atomic16_exchange(volatile uint16_t *dst, uint16_t val)
+{
+	return __atomic_exchange_2(dst, val, __ATOMIC_SEQ_CST);
+}
+#endif
+
 /**
  * The atomic counter structure.
  */
@@ -392,6 +418,32 @@ rte_atomic32_cmpset(volatile uint32_t *dst, uint32_t exp, uint32_t src)
 }
 #endif
 
+/**
+ * Atomic exchange.
+ *
+ * (atomic) equivalent to:
+ *   ret = *dst
+ *   *dst = val;
+ *   return ret;
+ *
+ * @param dst
+ *   The destination location into which the value will be written.
+ * @param val
+ *   The new value.
+ * @return
+ *   The original value at that location
+ */
+static inline uint32_t
+rte_atomic32_exchange(volatile uint32_t *dst, uint32_t val);
+
+#ifdef RTE_FORCE_INTRINSICS
+static inline uint32_t
+rte_atomic32_exchange(volatile uint32_t *dst, uint32_t val)
+{
+	return __atomic_exchange_4(dst, val, __ATOMIC_SEQ_CST);
+}
+#endif
+
 /**
  * The atomic counter structure.
  */
@@ -644,6 +696,32 @@ rte_atomic64_cmpset(volatile uint64_t *dst, uint64_t exp, uint64_t src)
 }
 #endif
 
+/**
+ * Atomic exchange.
+ *
+ * (atomic) equivalent to:
+ *   ret = *dst
+ *   *dst = val;
+ *   return ret;
+ *
+ * @param dst
+ *   The destination location into which the value will be written.
+ * @param val
+ *   The new value.
+ * @return
+ *   The original value at that location
+ */
+static inline uint64_t
+rte_atomic64_exchange(volatile uint64_t *dst, uint64_t val);
+
+#ifdef RTE_FORCE_INTRINSICS
+static inline uint64_t
+rte_atomic64_exchange(volatile uint64_t *dst, uint64_t val)
+{
+	return __atomic_exchange_4(dst, val, __ATOMIC_SEQ_CST);
+}
+#endif
+
 /**
  * The atomic counter structure.
  */
-- 
2.15.1

  reply	other threads:[~2018-01-06  1:07 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-06  1:06 [PATCH v2 00/15] common ethdev linkstatus functions Stephen Hemminger
2018-01-06  1:06 ` Stephen Hemminger [this message]
2018-01-06  1:06 ` [PATCH v2 02/15] ethdev: add linkstatus get/set helper functions Stephen Hemminger
2018-01-06 10:49   ` Andrew Rybchenko
2018-01-06 14:24     ` Stephen Hemminger
2018-01-06 14:35       ` Andrew Rybchenko
2018-01-06  1:06 ` [PATCH v2 03/15] virtio: use eth_linkstatus_set Stephen Hemminger
2018-01-06  3:10   ` Tiwei Bie
2018-01-08 17:03     ` Stephen Hemminger
2018-01-06  1:06 ` [PATCH v2 04/15] vmxnet3: use rte_eth_linkstatus_set Stephen Hemminger
2018-01-06  1:06 ` [PATCH v2 05/15] dpaa2: " Stephen Hemminger
2018-01-06  1:06 ` [PATCH v2 06/15] nfp: use rte_eth_linkstatus functions Stephen Hemminger
2018-01-06  1:06 ` [PATCH v2 07/15] e1000: use rte_eth_linkstatus helpers Stephen Hemminger
2018-01-06  1:06 ` [PATCH v2 08/15] ixgbe: use rte_eth_linkstatus functions Stephen Hemminger
2018-01-06  1:06 ` [PATCH v2 09/15] sfc: use new " Stephen Hemminger
2018-01-06 11:10   ` Andrew Rybchenko
2018-01-06  1:06 ` [PATCH v2 10/15] i40e: use " Stephen Hemminger
2018-01-06  1:06 ` [PATCH v2 11/15] liquidio: use _rte_eth_linkstatus_set Stephen Hemminger
2018-01-06  1:06 ` [PATCH v2 12/15] thunderx: " Stephen Hemminger
2018-01-06  1:06 ` [PATCH v2 13/15] szedata: " Stephen Hemminger
2018-01-06  1:06 ` [PATCH v2 14/15] octeontx: use rte_eth_linkstatus_set Stephen Hemminger
2018-01-06  1:06 ` [PATCH v2 15/15] enic: use _rte_eth_linkstatus_set Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180106010656.9167-2-stephen@networkplumber.org \
    --to=stephen@networkplumber.org \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.