From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [PATCH v2 08/15] ixgbe: use rte_eth_linkstatus functions
Date: Fri, 5 Jan 2018 17:06:49 -0800 [thread overview]
Message-ID: <20180106010656.9167-9-stephen@networkplumber.org> (raw)
In-Reply-To: <20180106010656.9167-1-stephen@networkplumber.org>
Use the new helper functions from eth_dev for
handling atomic link_info update.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
drivers/net/ixgbe/ixgbe_ethdev.c | 99 +++++++---------------------------------
1 file changed, 17 insertions(+), 82 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 43e0132f81fe..d33ffa626e4a 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -20,7 +20,6 @@
#include <rte_debug.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
-#include <rte_atomic.h>
#include <rte_branch_prediction.h>
#include <rte_memory.h>
#include <rte_eal.h>
@@ -781,58 +780,6 @@ static const struct rte_ixgbe_xstats_name_off rte_ixgbevf_stats_strings[] = {
#define IXGBEVF_NB_XSTATS (sizeof(rte_ixgbevf_stats_strings) / \
sizeof(rte_ixgbevf_stats_strings[0]))
-/**
- * Atomically reads the link status information from global
- * structure rte_eth_dev.
- *
- * @param dev
- * - Pointer to the structure rte_eth_dev to read from.
- * - Pointer to the buffer to be saved with the link status.
- *
- * @return
- * - On success, zero.
- * - On failure, negative value.
- */
-static inline int
-rte_ixgbe_dev_atomic_read_link_status(struct rte_eth_dev *dev,
- struct rte_eth_link *link)
-{
- struct rte_eth_link *dst = link;
- struct rte_eth_link *src = &(dev->data->dev_link);
-
- if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
- *(uint64_t *)src) == 0)
- return -1;
-
- return 0;
-}
-
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- * - Pointer to the structure rte_eth_dev to read from.
- * - Pointer to the buffer to be saved with the link status.
- *
- * @return
- * - On success, zero.
- * - On failure, negative value.
- */
-static inline int
-rte_ixgbe_dev_atomic_write_link_status(struct rte_eth_dev *dev,
- struct rte_eth_link *link)
-{
- struct rte_eth_link *dst = &(dev->data->dev_link);
- struct rte_eth_link *src = link;
-
- if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
- *(uint64_t *)src) == 0)
- return -1;
-
- return 0;
-}
-
/*
* This function is the same as ixgbe_is_sfp() in base/ixgbe.h.
*/
@@ -2753,7 +2700,7 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
/* Clear recorded link status */
memset(&link, 0, sizeof(link));
- rte_ixgbe_dev_atomic_write_link_status(dev, &link);
+ _rte_eth_linkstatus_set(dev, &link);
if (!rte_intr_allow_others(intr_handle))
/* resume to the default handler */
@@ -3938,7 +3885,6 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
int wait_to_complete, int vf)
{
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct rte_eth_link link, old;
ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
struct ixgbe_interrupt *intr =
IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
@@ -3947,13 +3893,11 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
u32 speed = 0;
int wait = 1;
bool autoneg = false;
-
- link.link_status = ETH_LINK_DOWN;
- link.link_speed = 0;
- link.link_duplex = ETH_LINK_HALF_DUPLEX;
- link.link_autoneg = ETH_LINK_AUTONEG;
- memset(&old, 0, sizeof(old));
- rte_ixgbe_dev_atomic_read_link_status(dev, &old);
+ struct rte_eth_link link = {
+ .link_status = ETH_LINK_DOWN,
+ .link_duplex = ETH_LINK_HALF_DUPLEX,
+ .link_autoneg = ETH_LINK_AUTONEG,
+ };
hw->mac.get_link_status = true;
@@ -3977,19 +3921,15 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
if (diag != 0) {
link.link_speed = ETH_SPEED_NUM_100M;
link.link_duplex = ETH_LINK_FULL_DUPLEX;
- rte_ixgbe_dev_atomic_write_link_status(dev, &link);
- if (link.link_status == old.link_status)
- return -1;
- return 0;
+
+ return _rte_eth_linkstatus_set(dev, &link);
}
if (link_up == 0) {
- rte_ixgbe_dev_atomic_write_link_status(dev, &link);
intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
- if (link.link_status == old.link_status)
- return -1;
- return 0;
+ return _rte_eth_linkstatus_set(dev, &link);
}
+
intr->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
link.link_status = ETH_LINK_UP;
link.link_duplex = ETH_LINK_FULL_DUPLEX;
@@ -4021,12 +3961,8 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
link.link_speed = ETH_SPEED_NUM_10G;
break;
}
- rte_ixgbe_dev_atomic_write_link_status(dev, &link);
- if (link.link_status == old.link_status)
- return -1;
-
- return 0;
+ return _rte_eth_linkstatus_set(dev, &link);
}
static int
@@ -4225,8 +4161,8 @@ ixgbe_dev_link_status_print(struct rte_eth_dev *dev)
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
struct rte_eth_link link;
- memset(&link, 0, sizeof(link));
- rte_ixgbe_dev_atomic_read_link_status(dev, &link);
+ _rte_eth_linkstatus_get(dev, &link);
+
if (link.link_status) {
PMD_INIT_LOG(INFO, "Port %d: Link Up - speed %u Mbps - %s",
(int)(dev->data->port_id),
@@ -4261,7 +4197,6 @@ ixgbe_dev_interrupt_action(struct rte_eth_dev *dev,
struct ixgbe_interrupt *intr =
IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
int64_t timeout;
- struct rte_eth_link link;
struct ixgbe_hw *hw =
IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
@@ -4278,9 +4213,10 @@ ixgbe_dev_interrupt_action(struct rte_eth_dev *dev,
}
if (intr->flags & IXGBE_FLAG_NEED_LINK_UPDATE) {
+ struct rte_eth_link link;
+
/* get the link status before link update, for predicting later */
- memset(&link, 0, sizeof(link));
- rte_ixgbe_dev_atomic_read_link_status(dev, &link);
+ _rte_eth_linkstatus_get(dev, &link);
ixgbe_dev_link_update(dev, 0);
@@ -6799,9 +6735,8 @@ ixgbe_start_timecounters(struct rte_eth_dev *dev)
uint32_t shift = 0;
/* Get current link speed. */
- memset(&link, 0, sizeof(link));
ixgbe_dev_link_update(dev, 1);
- rte_ixgbe_dev_atomic_read_link_status(dev, &link);
+ _rte_eth_linkstatus_get(dev, &link);
switch (link.link_speed) {
case ETH_SPEED_NUM_100M:
--
2.15.1
next prev parent reply other threads:[~2018-01-06 1:07 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-06 1:06 [PATCH v2 00/15] common ethdev linkstatus functions Stephen Hemminger
2018-01-06 1:06 ` [PATCH v2 01/15] eal: introduce atomic exchange operation Stephen Hemminger
2018-01-06 1:06 ` [PATCH v2 02/15] ethdev: add linkstatus get/set helper functions Stephen Hemminger
2018-01-06 10:49 ` Andrew Rybchenko
2018-01-06 14:24 ` Stephen Hemminger
2018-01-06 14:35 ` Andrew Rybchenko
2018-01-06 1:06 ` [PATCH v2 03/15] virtio: use eth_linkstatus_set Stephen Hemminger
2018-01-06 3:10 ` Tiwei Bie
2018-01-08 17:03 ` Stephen Hemminger
2018-01-06 1:06 ` [PATCH v2 04/15] vmxnet3: use rte_eth_linkstatus_set Stephen Hemminger
2018-01-06 1:06 ` [PATCH v2 05/15] dpaa2: " Stephen Hemminger
2018-01-06 1:06 ` [PATCH v2 06/15] nfp: use rte_eth_linkstatus functions Stephen Hemminger
2018-01-06 1:06 ` [PATCH v2 07/15] e1000: use rte_eth_linkstatus helpers Stephen Hemminger
2018-01-06 1:06 ` Stephen Hemminger [this message]
2018-01-06 1:06 ` [PATCH v2 09/15] sfc: use new rte_eth_linkstatus functions Stephen Hemminger
2018-01-06 11:10 ` Andrew Rybchenko
2018-01-06 1:06 ` [PATCH v2 10/15] i40e: use " Stephen Hemminger
2018-01-06 1:06 ` [PATCH v2 11/15] liquidio: use _rte_eth_linkstatus_set Stephen Hemminger
2018-01-06 1:06 ` [PATCH v2 12/15] thunderx: " Stephen Hemminger
2018-01-06 1:06 ` [PATCH v2 13/15] szedata: " Stephen Hemminger
2018-01-06 1:06 ` [PATCH v2 14/15] octeontx: use rte_eth_linkstatus_set Stephen Hemminger
2018-01-06 1:06 ` [PATCH v2 15/15] enic: use _rte_eth_linkstatus_set Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180106010656.9167-9-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.