From: niklas.cassel@axis.com (Niklas Cassel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/8] ARM: dts: artpec: use 1 GiB RAM
Date: Tue, 20 Feb 2018 18:00:43 +0100 [thread overview]
Message-ID: <20180220170049.22809-3-niklas.cassel@axis.com> (raw)
In-Reply-To: <20180220170049.22809-1-niklas.cassel@axis.com>
There has never been an artpec6 devboard produced
with less than 1 GiB RAM.
Increase the default value to 1 GiB RAM, so that we
can netboot with large initramfs without going OOM.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
arch/arm/boot/dts/artpec6-devboard.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
index 9dfe845694cf..502f3de6dc5b 100644
--- a/arch/arm/boot/dts/artpec6-devboard.dts
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -26,7 +26,7 @@
memory {
device_type = "memory";
- reg = <0x0 0x10000000>;
+ reg = <0x0 0x40000000>;
};
};
--
2.14.2
WARNING: multiple messages have this Message-ID (diff)
From: Niklas Cassel <niklas.cassel@axis.com>
To: arm@kernel.org, Jesper Nilsson <jespern@axis.com>,
Lars Persson <larper@axis.com>, Niklas Cassel <niklass@axis.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-arm-kernel@axis.com, linux-kernel@vger.kernel.org
Subject: [PATCH 2/8] ARM: dts: artpec: use 1 GiB RAM
Date: Tue, 20 Feb 2018 18:00:43 +0100 [thread overview]
Message-ID: <20180220170049.22809-3-niklas.cassel@axis.com> (raw)
In-Reply-To: <20180220170049.22809-1-niklas.cassel@axis.com>
There has never been an artpec6 devboard produced
with less than 1 GiB RAM.
Increase the default value to 1 GiB RAM, so that we
can netboot with large initramfs without going OOM.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
arch/arm/boot/dts/artpec6-devboard.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
index 9dfe845694cf..502f3de6dc5b 100644
--- a/arch/arm/boot/dts/artpec6-devboard.dts
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -26,7 +26,7 @@
memory {
device_type = "memory";
- reg = <0x0 0x10000000>;
+ reg = <0x0 0x40000000>;
};
};
--
2.14.2
WARNING: multiple messages have this Message-ID (diff)
From: Niklas Cassel <niklas.cassel@axis.com>
To: arm@kernel.org, Jesper Nilsson <jespern@axis.com>,
Lars Persson <larper@axis.com>, Niklas Cassel <niklass@axis.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@axis.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/8] ARM: dts: artpec: use 1 GiB RAM
Date: Tue, 20 Feb 2018 18:00:43 +0100 [thread overview]
Message-ID: <20180220170049.22809-3-niklas.cassel@axis.com> (raw)
In-Reply-To: <20180220170049.22809-1-niklas.cassel@axis.com>
There has never been an artpec6 devboard produced
with less than 1 GiB RAM.
Increase the default value to 1 GiB RAM, so that we
can netboot with large initramfs without going OOM.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
arch/arm/boot/dts/artpec6-devboard.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
index 9dfe845694cf..502f3de6dc5b 100644
--- a/arch/arm/boot/dts/artpec6-devboard.dts
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -26,7 +26,7 @@
memory {
device_type = "memory";
- reg = <0x0 0x10000000>;
+ reg = <0x0 0x40000000>;
};
};
--
2.14.2
next prev parent reply other threads:[~2018-02-20 17:00 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-20 17:00 [PATCH 0/8] ARTPEC-6 ARM SoC device tree updates Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` [PATCH 1/8] ARM: dts: artpec: disable Accelerator Coherency Port Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel [this message]
2018-02-20 17:00 ` [PATCH 2/8] ARM: dts: artpec: use 1 GiB RAM Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` [PATCH 3/8] ARM: dts: artpec: remove 0x prefix from clkctrl unit address Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` [PATCH 4/8] ARM: dts: artpec: migrate ethernet to stmmac binding Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` [PATCH 5/8] ARM: dts: artpec: add and utilize artpec6 pin controller Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` [PATCH 6/8] ARM: dts: artpec: add and utilize nbpfaxi DMA controllers Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` [PATCH 7/8] ARM: dts: artpec: add disabled node for PCIe endpoint mode Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 21:29 ` Niklas Cassel
2018-02-20 21:29 ` Niklas Cassel
2018-02-20 21:29 ` Niklas Cassel
2018-02-20 17:00 ` [PATCH 8/8] ARM: dts: artpec: add node for hardware crypto accelerator Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
2018-02-20 17:00 ` Niklas Cassel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180220170049.22809-3-niklas.cassel@axis.com \
--to=niklas.cassel@axis.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.