From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
wens-jdAy2FN1RRM@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org,
Marcus Cooper
<codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v2 3/6] ASoC: sun4i-i2s: Correct divider calculations
Date: Mon, 12 Mar 2018 16:57:50 +0100 [thread overview]
Message-ID: <20180312155753.9478-4-codekipper@gmail.com> (raw)
In-Reply-To: <20180312155753.9478-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
The clock division circuitry is different on the H3 and later SoCs.
The division of bclk is now based on pll2.
Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
sound/soc/sunxi/sun4i-i2s.c | 76 +++++++++++++++++++++++++++++++--------------
1 file changed, 52 insertions(+), 24 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 396b11346361..2bd0befa02a8 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -129,10 +129,10 @@
* @has_chsel_offset: SoC uses offset for selecting dai operational mode.
* @reg_offset_txdata: offset of the tx fifo.
* @sun4i_i2s_regmap: regmap config to use.
- * @mclk_offset: Value by which mclkdiv needs to be adjusted.
- * @bclk_offset: Value by which bclkdiv needs to be adjusted.
* @fmt_offset: Value by which wss and sr needs to be adjusted.
* @field_clkdiv_mclk_en: regmap field to enable mclk output.
+ * @field_clkdiv_mclk: regmap field for mclkdiv.
+ * @field_clkdiv_bclk: regmap field for bclkdiv.
* @field_fmt_wss: regmap field to set word select size.
* @field_fmt_sr: regmap field to set sample resolution.
* @field_fmt_bclk: regmap field to set clk polarity.
@@ -153,8 +153,6 @@ struct sun4i_i2s_quirks {
bool has_chsel_offset;
unsigned int reg_offset_txdata; /* TX FIFO */
const struct regmap_config *sun4i_i2s_regmap;
- unsigned int mclk_offset;
- unsigned int bclk_offset;
unsigned int fmt_offset;
/* Register fields for i2s */
@@ -212,7 +210,25 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_bclk_div[] = {
{ .div = 8, .val = 3 },
{ .div = 12, .val = 4 },
{ .div = 16, .val = 5 },
- /* TODO - extend divide ratio supported by newer SoCs */
+};
+
+static const struct sun4i_i2s_clk_div sun8i_i2s_clk_div[] = {
+ { .div = 0, .val = 0 },
+ { .div = 1, .val = 1 },
+ { .div = 2, .val = 2 },
+ { .div = 4, .val = 3 },
+ { .div = 6, .val = 4 },
+ { .div = 8, .val = 5 },
+ { .div = 12, .val = 6 },
+ { .div = 16, .val = 7 },
+ { .div = 24, .val = 8 },
+ { .div = 32, .val = 9 },
+ { .div = 48, .val = 10 },
+ { .div = 64, .val = 11 },
+ { .div = 96, .val = 12 },
+ { .div = 128, .val = 13 },
+ { .div = 176, .val = 14 },
+ { .div = 192, .val = 15 },
};
static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
@@ -224,21 +240,21 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
{ .div = 12, .val = 5 },
{ .div = 16, .val = 6 },
{ .div = 24, .val = 7 },
- /* TODO - extend divide ratio supported by newer SoCs */
};
static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
unsigned int oversample_rate,
- unsigned int word_size)
+ unsigned int word_size,
+ const struct sun4i_i2s_clk_div *bdiv,
+ unsigned int size)
{
int div = oversample_rate / word_size / 2;
int i;
- for (i = 0; i < ARRAY_SIZE(sun4i_i2s_bclk_div); i++) {
- const struct sun4i_i2s_clk_div *bdiv = &sun4i_i2s_bclk_div[i];
-
+ for (i = 0; i < size; i++) {
if (bdiv->div == div)
return bdiv->val;
+ bdiv++;
}
return -EINVAL;
@@ -247,16 +263,17 @@ static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
static int sun4i_i2s_get_mclk_div(struct sun4i_i2s *i2s,
unsigned int oversample_rate,
unsigned int module_rate,
- unsigned int sampling_rate)
+ unsigned int sampling_rate,
+ const struct sun4i_i2s_clk_div *mdiv,
+ unsigned int size)
{
int div = module_rate / sampling_rate / oversample_rate;
int i;
- for (i = 0; i < ARRAY_SIZE(sun4i_i2s_mclk_div); i++) {
- const struct sun4i_i2s_clk_div *mdiv = &sun4i_i2s_mclk_div[i];
-
+ for (i = 0; i < size; i++) {
if (mdiv->div == div)
return mdiv->val;
+ mdiv++;
}
return -EINVAL;
@@ -321,24 +338,37 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
return -EINVAL;
}
- bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
- word_size);
+ if (i2s->variant->has_fmt_set_lrck_period)
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, clk_rate / rate,
+ word_size,
+ sun8i_i2s_clk_div,
+ ARRAY_SIZE(sun8i_i2s_clk_div));
+ else
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
+ word_size,
+ sun4i_i2s_bclk_div,
+ ARRAY_SIZE(sun4i_i2s_bclk_div));
if (bclk_div < 0) {
dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div);
return -EINVAL;
}
- mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
- clk_rate, rate);
+
+ if (i2s->variant->has_fmt_set_lrck_period)
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate,
+ sun8i_i2s_clk_div,
+ ARRAY_SIZE(sun8i_i2s_clk_div));
+ else
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate,
+ sun4i_i2s_mclk_div,
+ ARRAY_SIZE(sun4i_i2s_mclk_div));
if (mclk_div < 0) {
dev_err(dai->dev, "Unsupported MCLK divider: %d\n", mclk_div);
return -EINVAL;
}
- /* Adjust the clock division values if needed */
- bclk_div += i2s->variant->bclk_offset;
- mclk_div += i2s->variant->mclk_offset;
-
regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
@@ -953,8 +983,6 @@ static const struct sun4i_i2s_quirks sun8i_h3_i2s_quirks = {
.has_reset = true,
.reg_offset_txdata = SUN8I_I2S_FIFO_TX_REG,
.sun4i_i2s_regmap = &sun8i_i2s_regmap_config,
- .mclk_offset = 1,
- .bclk_offset = 2,
.fmt_offset = 3,
.has_fmt_set_lrck_period = true,
.has_chcfg = true,
--
2.16.2
WARNING: multiple messages have this Message-ID (diff)
From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/6] ASoC: sun4i-i2s: Correct divider calculations
Date: Mon, 12 Mar 2018 16:57:50 +0100 [thread overview]
Message-ID: <20180312155753.9478-4-codekipper@gmail.com> (raw)
In-Reply-To: <20180312155753.9478-1-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
The clock division circuitry is different on the H3 and later SoCs.
The division of bclk is now based on pll2.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
sound/soc/sunxi/sun4i-i2s.c | 76 +++++++++++++++++++++++++++++++--------------
1 file changed, 52 insertions(+), 24 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 396b11346361..2bd0befa02a8 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -129,10 +129,10 @@
* @has_chsel_offset: SoC uses offset for selecting dai operational mode.
* @reg_offset_txdata: offset of the tx fifo.
* @sun4i_i2s_regmap: regmap config to use.
- * @mclk_offset: Value by which mclkdiv needs to be adjusted.
- * @bclk_offset: Value by which bclkdiv needs to be adjusted.
* @fmt_offset: Value by which wss and sr needs to be adjusted.
* @field_clkdiv_mclk_en: regmap field to enable mclk output.
+ * @field_clkdiv_mclk: regmap field for mclkdiv.
+ * @field_clkdiv_bclk: regmap field for bclkdiv.
* @field_fmt_wss: regmap field to set word select size.
* @field_fmt_sr: regmap field to set sample resolution.
* @field_fmt_bclk: regmap field to set clk polarity.
@@ -153,8 +153,6 @@ struct sun4i_i2s_quirks {
bool has_chsel_offset;
unsigned int reg_offset_txdata; /* TX FIFO */
const struct regmap_config *sun4i_i2s_regmap;
- unsigned int mclk_offset;
- unsigned int bclk_offset;
unsigned int fmt_offset;
/* Register fields for i2s */
@@ -212,7 +210,25 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_bclk_div[] = {
{ .div = 8, .val = 3 },
{ .div = 12, .val = 4 },
{ .div = 16, .val = 5 },
- /* TODO - extend divide ratio supported by newer SoCs */
+};
+
+static const struct sun4i_i2s_clk_div sun8i_i2s_clk_div[] = {
+ { .div = 0, .val = 0 },
+ { .div = 1, .val = 1 },
+ { .div = 2, .val = 2 },
+ { .div = 4, .val = 3 },
+ { .div = 6, .val = 4 },
+ { .div = 8, .val = 5 },
+ { .div = 12, .val = 6 },
+ { .div = 16, .val = 7 },
+ { .div = 24, .val = 8 },
+ { .div = 32, .val = 9 },
+ { .div = 48, .val = 10 },
+ { .div = 64, .val = 11 },
+ { .div = 96, .val = 12 },
+ { .div = 128, .val = 13 },
+ { .div = 176, .val = 14 },
+ { .div = 192, .val = 15 },
};
static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
@@ -224,21 +240,21 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
{ .div = 12, .val = 5 },
{ .div = 16, .val = 6 },
{ .div = 24, .val = 7 },
- /* TODO - extend divide ratio supported by newer SoCs */
};
static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
unsigned int oversample_rate,
- unsigned int word_size)
+ unsigned int word_size,
+ const struct sun4i_i2s_clk_div *bdiv,
+ unsigned int size)
{
int div = oversample_rate / word_size / 2;
int i;
- for (i = 0; i < ARRAY_SIZE(sun4i_i2s_bclk_div); i++) {
- const struct sun4i_i2s_clk_div *bdiv = &sun4i_i2s_bclk_div[i];
-
+ for (i = 0; i < size; i++) {
if (bdiv->div == div)
return bdiv->val;
+ bdiv++;
}
return -EINVAL;
@@ -247,16 +263,17 @@ static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
static int sun4i_i2s_get_mclk_div(struct sun4i_i2s *i2s,
unsigned int oversample_rate,
unsigned int module_rate,
- unsigned int sampling_rate)
+ unsigned int sampling_rate,
+ const struct sun4i_i2s_clk_div *mdiv,
+ unsigned int size)
{
int div = module_rate / sampling_rate / oversample_rate;
int i;
- for (i = 0; i < ARRAY_SIZE(sun4i_i2s_mclk_div); i++) {
- const struct sun4i_i2s_clk_div *mdiv = &sun4i_i2s_mclk_div[i];
-
+ for (i = 0; i < size; i++) {
if (mdiv->div == div)
return mdiv->val;
+ mdiv++;
}
return -EINVAL;
@@ -321,24 +338,37 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
return -EINVAL;
}
- bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
- word_size);
+ if (i2s->variant->has_fmt_set_lrck_period)
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, clk_rate / rate,
+ word_size,
+ sun8i_i2s_clk_div,
+ ARRAY_SIZE(sun8i_i2s_clk_div));
+ else
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
+ word_size,
+ sun4i_i2s_bclk_div,
+ ARRAY_SIZE(sun4i_i2s_bclk_div));
if (bclk_div < 0) {
dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div);
return -EINVAL;
}
- mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
- clk_rate, rate);
+
+ if (i2s->variant->has_fmt_set_lrck_period)
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate,
+ sun8i_i2s_clk_div,
+ ARRAY_SIZE(sun8i_i2s_clk_div));
+ else
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate,
+ sun4i_i2s_mclk_div,
+ ARRAY_SIZE(sun4i_i2s_mclk_div));
if (mclk_div < 0) {
dev_err(dai->dev, "Unsupported MCLK divider: %d\n", mclk_div);
return -EINVAL;
}
- /* Adjust the clock division values if needed */
- bclk_div += i2s->variant->bclk_offset;
- mclk_div += i2s->variant->mclk_offset;
-
regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
@@ -953,8 +983,6 @@ static const struct sun4i_i2s_quirks sun8i_h3_i2s_quirks = {
.has_reset = true,
.reg_offset_txdata = SUN8I_I2S_FIFO_TX_REG,
.sun4i_i2s_regmap = &sun8i_i2s_regmap_config,
- .mclk_offset = 1,
- .bclk_offset = 2,
.fmt_offset = 3,
.has_fmt_set_lrck_period = true,
.has_chcfg = true,
--
2.16.2
WARNING: multiple messages have this Message-ID (diff)
From: codekipper@gmail.com
To: maxime.ripard@free-electrons.com, wens@csie.org,
linux-sunxi@googlegroups.com
Cc: linux-arm-kernel@lists.infradead.org, lgirdwood@gmail.com,
broonie@kernel.org, linux-kernel@vger.kernel.org,
alsa-devel@alsa-project.org, be17068@iperbole.bo.it,
Marcus Cooper <codekipper@gmail.com>
Subject: [PATCH v2 3/6] ASoC: sun4i-i2s: Correct divider calculations
Date: Mon, 12 Mar 2018 16:57:50 +0100 [thread overview]
Message-ID: <20180312155753.9478-4-codekipper@gmail.com> (raw)
In-Reply-To: <20180312155753.9478-1-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
The clock division circuitry is different on the H3 and later SoCs.
The division of bclk is now based on pll2.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
sound/soc/sunxi/sun4i-i2s.c | 76 +++++++++++++++++++++++++++++++--------------
1 file changed, 52 insertions(+), 24 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 396b11346361..2bd0befa02a8 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -129,10 +129,10 @@
* @has_chsel_offset: SoC uses offset for selecting dai operational mode.
* @reg_offset_txdata: offset of the tx fifo.
* @sun4i_i2s_regmap: regmap config to use.
- * @mclk_offset: Value by which mclkdiv needs to be adjusted.
- * @bclk_offset: Value by which bclkdiv needs to be adjusted.
* @fmt_offset: Value by which wss and sr needs to be adjusted.
* @field_clkdiv_mclk_en: regmap field to enable mclk output.
+ * @field_clkdiv_mclk: regmap field for mclkdiv.
+ * @field_clkdiv_bclk: regmap field for bclkdiv.
* @field_fmt_wss: regmap field to set word select size.
* @field_fmt_sr: regmap field to set sample resolution.
* @field_fmt_bclk: regmap field to set clk polarity.
@@ -153,8 +153,6 @@ struct sun4i_i2s_quirks {
bool has_chsel_offset;
unsigned int reg_offset_txdata; /* TX FIFO */
const struct regmap_config *sun4i_i2s_regmap;
- unsigned int mclk_offset;
- unsigned int bclk_offset;
unsigned int fmt_offset;
/* Register fields for i2s */
@@ -212,7 +210,25 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_bclk_div[] = {
{ .div = 8, .val = 3 },
{ .div = 12, .val = 4 },
{ .div = 16, .val = 5 },
- /* TODO - extend divide ratio supported by newer SoCs */
+};
+
+static const struct sun4i_i2s_clk_div sun8i_i2s_clk_div[] = {
+ { .div = 0, .val = 0 },
+ { .div = 1, .val = 1 },
+ { .div = 2, .val = 2 },
+ { .div = 4, .val = 3 },
+ { .div = 6, .val = 4 },
+ { .div = 8, .val = 5 },
+ { .div = 12, .val = 6 },
+ { .div = 16, .val = 7 },
+ { .div = 24, .val = 8 },
+ { .div = 32, .val = 9 },
+ { .div = 48, .val = 10 },
+ { .div = 64, .val = 11 },
+ { .div = 96, .val = 12 },
+ { .div = 128, .val = 13 },
+ { .div = 176, .val = 14 },
+ { .div = 192, .val = 15 },
};
static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
@@ -224,21 +240,21 @@ static const struct sun4i_i2s_clk_div sun4i_i2s_mclk_div[] = {
{ .div = 12, .val = 5 },
{ .div = 16, .val = 6 },
{ .div = 24, .val = 7 },
- /* TODO - extend divide ratio supported by newer SoCs */
};
static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
unsigned int oversample_rate,
- unsigned int word_size)
+ unsigned int word_size,
+ const struct sun4i_i2s_clk_div *bdiv,
+ unsigned int size)
{
int div = oversample_rate / word_size / 2;
int i;
- for (i = 0; i < ARRAY_SIZE(sun4i_i2s_bclk_div); i++) {
- const struct sun4i_i2s_clk_div *bdiv = &sun4i_i2s_bclk_div[i];
-
+ for (i = 0; i < size; i++) {
if (bdiv->div == div)
return bdiv->val;
+ bdiv++;
}
return -EINVAL;
@@ -247,16 +263,17 @@ static int sun4i_i2s_get_bclk_div(struct sun4i_i2s *i2s,
static int sun4i_i2s_get_mclk_div(struct sun4i_i2s *i2s,
unsigned int oversample_rate,
unsigned int module_rate,
- unsigned int sampling_rate)
+ unsigned int sampling_rate,
+ const struct sun4i_i2s_clk_div *mdiv,
+ unsigned int size)
{
int div = module_rate / sampling_rate / oversample_rate;
int i;
- for (i = 0; i < ARRAY_SIZE(sun4i_i2s_mclk_div); i++) {
- const struct sun4i_i2s_clk_div *mdiv = &sun4i_i2s_mclk_div[i];
-
+ for (i = 0; i < size; i++) {
if (mdiv->div == div)
return mdiv->val;
+ mdiv++;
}
return -EINVAL;
@@ -321,24 +338,37 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
return -EINVAL;
}
- bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
- word_size);
+ if (i2s->variant->has_fmt_set_lrck_period)
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, clk_rate / rate,
+ word_size,
+ sun8i_i2s_clk_div,
+ ARRAY_SIZE(sun8i_i2s_clk_div));
+ else
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
+ word_size,
+ sun4i_i2s_bclk_div,
+ ARRAY_SIZE(sun4i_i2s_bclk_div));
if (bclk_div < 0) {
dev_err(dai->dev, "Unsupported BCLK divider: %d\n", bclk_div);
return -EINVAL;
}
- mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
- clk_rate, rate);
+
+ if (i2s->variant->has_fmt_set_lrck_period)
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate,
+ sun8i_i2s_clk_div,
+ ARRAY_SIZE(sun8i_i2s_clk_div));
+ else
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate,
+ sun4i_i2s_mclk_div,
+ ARRAY_SIZE(sun4i_i2s_mclk_div));
if (mclk_div < 0) {
dev_err(dai->dev, "Unsupported MCLK divider: %d\n", mclk_div);
return -EINVAL;
}
- /* Adjust the clock division values if needed */
- bclk_div += i2s->variant->bclk_offset;
- mclk_div += i2s->variant->mclk_offset;
-
regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
SUN4I_I2S_CLK_DIV_BCLK(bclk_div) |
SUN4I_I2S_CLK_DIV_MCLK(mclk_div));
@@ -953,8 +983,6 @@ static const struct sun4i_i2s_quirks sun8i_h3_i2s_quirks = {
.has_reset = true,
.reg_offset_txdata = SUN8I_I2S_FIFO_TX_REG,
.sun4i_i2s_regmap = &sun8i_i2s_regmap_config,
- .mclk_offset = 1,
- .bclk_offset = 2,
.fmt_offset = 3,
.has_fmt_set_lrck_period = true,
.has_chcfg = true,
--
2.16.2
next prev parent reply other threads:[~2018-03-12 15:57 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-12 15:57 [PATCH v2 0/6] ASoC: sun4i-i2s: Updates to the driver codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-03-12 15:57 ` codekipper
2018-03-12 15:57 ` codekipper at gmail.com
[not found] ` <20180312155753.9478-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-03-12 15:57 ` [PATCH v2 1/6] ASoC: sun4i-i2s: Add slot width override codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-03-12 15:57 ` codekipper
2018-03-12 15:57 ` codekipper at gmail.com
2018-03-12 18:20 ` Mark Brown
2018-03-12 18:20 ` Mark Brown
[not found] ` <20180312155753.9478-2-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-03-13 11:59 ` Julian Calaby
2018-03-13 11:59 ` [linux-sunxi] " Julian Calaby
2018-03-13 11:59 ` Julian Calaby
2018-03-12 15:57 ` [PATCH v2 2/6] ASoC: sun4i-i2s: Add regmap field to sign extend sample codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-03-12 15:57 ` codekipper
2018-03-12 15:57 ` codekipper at gmail.com
2018-03-12 15:57 ` codekipper-Re5JQEeQqe8AvxtiuMwx3w [this message]
2018-03-12 15:57 ` [PATCH v2 3/6] ASoC: sun4i-i2s: Correct divider calculations codekipper
2018-03-12 15:57 ` codekipper at gmail.com
2018-03-13 8:20 ` Maxime Ripard
2018-03-13 8:20 ` Maxime Ripard
2018-03-12 15:57 ` [PATCH v2 4/6] ASoC: sun4i-i2s: Add multi-lane functionality codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-03-12 15:57 ` codekipper
2018-03-12 15:57 ` codekipper at gmail.com
2018-03-13 8:00 ` Maxime Ripard
2018-03-13 8:00 ` Maxime Ripard
2018-03-13 8:15 ` Code Kipper
2018-03-13 8:15 ` Code Kipper
2018-03-13 8:15 ` Code Kipper
2018-03-13 8:23 ` Maxime Ripard
2018-03-13 8:23 ` Maxime Ripard
2018-03-13 8:59 ` Code Kipper
2018-03-13 8:59 ` Code Kipper
2018-03-13 8:59 ` Code Kipper
2018-03-12 15:57 ` [PATCH v2 5/6] ASoc: sun4i-i2s: Add 20, 24 and 32 bit support codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-03-12 15:57 ` codekipper
2018-03-12 15:57 ` codekipper at gmail.com
2018-03-12 15:57 ` [PATCH v2 6/6] ASoC: sun4i-i2s: Add support for loopback codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-03-12 15:57 ` codekipper
2018-03-12 15:57 ` codekipper at gmail.com
2018-03-12 18:35 ` Mark Brown
2018-03-13 13:39 ` [linux-sunxi] " Chris Obbard
2018-03-13 13:39 ` Chris Obbard
2018-03-13 13:39 ` Chris Obbard
2018-03-13 14:03 ` Maxime Ripard
2018-03-13 14:03 ` Maxime Ripard
2018-03-13 16:26 ` Mark Brown
2018-03-13 16:26 ` [alsa-devel] " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180312155753.9478-4-codekipper@gmail.com \
--to=codekipper-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.