All of lore.kernel.org
 help / color / mirror / Atom feed
From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
	wens-jdAy2FN1RRM@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
	be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org,
	Marcus Cooper
	<codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v2 4/6] ASoC: sun4i-i2s: Add multi-lane functionality
Date: Mon, 12 Mar 2018 16:57:51 +0100	[thread overview]
Message-ID: <20180312155753.9478-5-codekipper@gmail.com> (raw)
In-Reply-To: <20180312155753.9478-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

The i2s block supports multi-lane i2s output however this functionality
is only possible in earlier SoCs where the pins are exposed and for
the i2s block used for HDMI audio on the later SoCs.

To enable this functionality, an optional property has been added to
the bindings.

Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 .../devicetree/bindings/sound/sun4i-i2s.txt        |  3 ++
 sound/soc/sunxi/sun4i-i2s.c                        | 48 +++++++++++++++++-----
 2 files changed, 41 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
index 48addef65b8f..3f966ac61b9e 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
@@ -33,6 +33,9 @@ Optional properties:
 				configured to extend the slot width to the
 				value specified. Min 8, Max 32.
 
+- allwinner,playback-channels:  if this property is present then the number
+				of available channels is extended and the
+				outputs enabled.
 Example:
 
 i2s0: i2s@1c22400 {
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 2bd0befa02a8..436480df1844 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -27,7 +27,7 @@
 
 #define SUN4I_I2S_CTRL_REG		0x00
 #define SUN4I_I2S_CTRL_SDO_EN_MASK		GENMASK(11, 8)
-#define SUN4I_I2S_CTRL_SDO_EN(sdo)			BIT(8 + (sdo))
+#define SUN4I_I2S_CTRL_SDO_EN(lines)		(((1 << lines) - 1) << 8)
 #define SUN4I_I2S_CTRL_MODE_MASK		BIT(5)
 #define SUN4I_I2S_CTRL_MODE_SLAVE			(1 << 5)
 #define SUN4I_I2S_CTRL_MODE_MASTER			(0 << 5)
@@ -394,14 +394,23 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 	struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
 	int sr, wss, channels;
 	u32 width;
+	int lines;
 
 	channels = params_channels(params);
-	if (channels != 2) {
+	if ((channels > dai->driver->playback.channels_max) ||
+		(channels < dai->driver->playback.channels_min)) {
 		dev_err(dai->dev, "Unsupported number of channels: %d\n",
 			channels);
 		return -EINVAL;
 	}
 
+	lines = (channels + 1) / 2;
+
+	/* Enable the required output lines */
+	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
+			   SUN4I_I2S_CTRL_SDO_EN_MASK,
+			   SUN4I_I2S_CTRL_SDO_EN(lines));
+
 	if (i2s->variant->has_chcfg) {
 		regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
 				   SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM_MASK,
@@ -412,8 +421,19 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	/* Map the channels for playback and capture */
-	regmap_field_write(i2s->field_txchanmap, 0x76543210);
 	regmap_field_write(i2s->field_rxchanmap, 0x00003210);
+	regmap_field_write(i2s->field_txchanmap, 0x10);
+	if (i2s->variant->has_chsel_tx_chen) {
+		if (channels > 2)
+			regmap_write(i2s->regmap,
+				     SUN8I_I2S_TX_CHAN_MAP_REG+4, 0x32);
+		if (channels > 4)
+			regmap_write(i2s->regmap,
+				     SUN8I_I2S_TX_CHAN_MAP_REG+8, 0x54);
+		if (channels > 6)
+			regmap_write(i2s->regmap,
+				     SUN8I_I2S_TX_CHAN_MAP_REG+12, 0x76);
+	}
 
 	/* Configure the channels */
 	regmap_field_write(i2s->field_txchansel,
@@ -692,12 +712,6 @@ static int sun4i_i2s_startup(struct snd_pcm_substream *substream,
 	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
 			   SUN4I_I2S_CTRL_GL_EN, SUN4I_I2S_CTRL_GL_EN);
 
-	/* Enable the first output line */
-	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
-			   SUN4I_I2S_CTRL_SDO_EN_MASK,
-			   SUN4I_I2S_CTRL_SDO_EN(0));
-
-
 	return clk_prepare_enable(i2s->mod_clk);
 }
 
@@ -1073,6 +1087,7 @@ static int sun4i_i2s_init_regmap_fields(struct device *dev,
 static int sun4i_i2s_probe(struct platform_device *pdev)
 {
 	struct sun4i_i2s *i2s;
+	struct snd_soc_dai_driver *soc_dai;
 	struct resource *res;
 	void __iomem *regs;
 	int irq, ret, val;
@@ -1148,6 +1163,19 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
 			i2s->slot_width = val;
 	}
 
+	soc_dai = devm_kmemdup(&pdev->dev, &sun4i_i2s_dai,
+			       sizeof(*soc_dai), GFP_KERNEL);
+	if (!soc_dai) {
+		ret = -ENOMEM;
+		goto err_pm_disable;
+	}
+
+	if (!of_property_read_u32(pdev->dev.of_node,
+				  "allwinner,playback-channels", &val)) {
+		if (val >= 2 && val <= 8)
+			soc_dai->playback.channels_max = val;
+	}
+
 	pm_runtime_enable(&pdev->dev);
 	if (!pm_runtime_enabled(&pdev->dev)) {
 		ret = sun4i_i2s_runtime_resume(&pdev->dev);
@@ -1157,7 +1185,7 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
 
 	ret = devm_snd_soc_register_component(&pdev->dev,
 					      &sun4i_i2s_component,
-					      &sun4i_i2s_dai, 1);
+					      soc_dai, 1);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not register DAI\n");
 		goto err_suspend;
-- 
2.16.2

WARNING: multiple messages have this Message-ID (diff)
From: codekipper@gmail.com (codekipper at gmail.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/6] ASoC: sun4i-i2s: Add multi-lane functionality
Date: Mon, 12 Mar 2018 16:57:51 +0100	[thread overview]
Message-ID: <20180312155753.9478-5-codekipper@gmail.com> (raw)
In-Reply-To: <20180312155753.9478-1-codekipper@gmail.com>

From: Marcus Cooper <codekipper@gmail.com>

The i2s block supports multi-lane i2s output however this functionality
is only possible in earlier SoCs where the pins are exposed and for
the i2s block used for HDMI audio on the later SoCs.

To enable this functionality, an optional property has been added to
the bindings.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 .../devicetree/bindings/sound/sun4i-i2s.txt        |  3 ++
 sound/soc/sunxi/sun4i-i2s.c                        | 48 +++++++++++++++++-----
 2 files changed, 41 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
index 48addef65b8f..3f966ac61b9e 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
@@ -33,6 +33,9 @@ Optional properties:
 				configured to extend the slot width to the
 				value specified. Min 8, Max 32.
 
+- allwinner,playback-channels:  if this property is present then the number
+				of available channels is extended and the
+				outputs enabled.
 Example:
 
 i2s0: i2s at 1c22400 {
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 2bd0befa02a8..436480df1844 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -27,7 +27,7 @@
 
 #define SUN4I_I2S_CTRL_REG		0x00
 #define SUN4I_I2S_CTRL_SDO_EN_MASK		GENMASK(11, 8)
-#define SUN4I_I2S_CTRL_SDO_EN(sdo)			BIT(8 + (sdo))
+#define SUN4I_I2S_CTRL_SDO_EN(lines)		(((1 << lines) - 1) << 8)
 #define SUN4I_I2S_CTRL_MODE_MASK		BIT(5)
 #define SUN4I_I2S_CTRL_MODE_SLAVE			(1 << 5)
 #define SUN4I_I2S_CTRL_MODE_MASTER			(0 << 5)
@@ -394,14 +394,23 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 	struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
 	int sr, wss, channels;
 	u32 width;
+	int lines;
 
 	channels = params_channels(params);
-	if (channels != 2) {
+	if ((channels > dai->driver->playback.channels_max) ||
+		(channels < dai->driver->playback.channels_min)) {
 		dev_err(dai->dev, "Unsupported number of channels: %d\n",
 			channels);
 		return -EINVAL;
 	}
 
+	lines = (channels + 1) / 2;
+
+	/* Enable the required output lines */
+	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
+			   SUN4I_I2S_CTRL_SDO_EN_MASK,
+			   SUN4I_I2S_CTRL_SDO_EN(lines));
+
 	if (i2s->variant->has_chcfg) {
 		regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
 				   SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM_MASK,
@@ -412,8 +421,19 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	/* Map the channels for playback and capture */
-	regmap_field_write(i2s->field_txchanmap, 0x76543210);
 	regmap_field_write(i2s->field_rxchanmap, 0x00003210);
+	regmap_field_write(i2s->field_txchanmap, 0x10);
+	if (i2s->variant->has_chsel_tx_chen) {
+		if (channels > 2)
+			regmap_write(i2s->regmap,
+				     SUN8I_I2S_TX_CHAN_MAP_REG+4, 0x32);
+		if (channels > 4)
+			regmap_write(i2s->regmap,
+				     SUN8I_I2S_TX_CHAN_MAP_REG+8, 0x54);
+		if (channels > 6)
+			regmap_write(i2s->regmap,
+				     SUN8I_I2S_TX_CHAN_MAP_REG+12, 0x76);
+	}
 
 	/* Configure the channels */
 	regmap_field_write(i2s->field_txchansel,
@@ -692,12 +712,6 @@ static int sun4i_i2s_startup(struct snd_pcm_substream *substream,
 	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
 			   SUN4I_I2S_CTRL_GL_EN, SUN4I_I2S_CTRL_GL_EN);
 
-	/* Enable the first output line */
-	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
-			   SUN4I_I2S_CTRL_SDO_EN_MASK,
-			   SUN4I_I2S_CTRL_SDO_EN(0));
-
-
 	return clk_prepare_enable(i2s->mod_clk);
 }
 
@@ -1073,6 +1087,7 @@ static int sun4i_i2s_init_regmap_fields(struct device *dev,
 static int sun4i_i2s_probe(struct platform_device *pdev)
 {
 	struct sun4i_i2s *i2s;
+	struct snd_soc_dai_driver *soc_dai;
 	struct resource *res;
 	void __iomem *regs;
 	int irq, ret, val;
@@ -1148,6 +1163,19 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
 			i2s->slot_width = val;
 	}
 
+	soc_dai = devm_kmemdup(&pdev->dev, &sun4i_i2s_dai,
+			       sizeof(*soc_dai), GFP_KERNEL);
+	if (!soc_dai) {
+		ret = -ENOMEM;
+		goto err_pm_disable;
+	}
+
+	if (!of_property_read_u32(pdev->dev.of_node,
+				  "allwinner,playback-channels", &val)) {
+		if (val >= 2 && val <= 8)
+			soc_dai->playback.channels_max = val;
+	}
+
 	pm_runtime_enable(&pdev->dev);
 	if (!pm_runtime_enabled(&pdev->dev)) {
 		ret = sun4i_i2s_runtime_resume(&pdev->dev);
@@ -1157,7 +1185,7 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
 
 	ret = devm_snd_soc_register_component(&pdev->dev,
 					      &sun4i_i2s_component,
-					      &sun4i_i2s_dai, 1);
+					      soc_dai, 1);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not register DAI\n");
 		goto err_suspend;
-- 
2.16.2

WARNING: multiple messages have this Message-ID (diff)
From: codekipper@gmail.com
To: maxime.ripard@free-electrons.com, wens@csie.org,
	linux-sunxi@googlegroups.com
Cc: linux-arm-kernel@lists.infradead.org, lgirdwood@gmail.com,
	broonie@kernel.org, linux-kernel@vger.kernel.org,
	alsa-devel@alsa-project.org, be17068@iperbole.bo.it,
	Marcus Cooper <codekipper@gmail.com>
Subject: [PATCH v2 4/6] ASoC: sun4i-i2s: Add multi-lane functionality
Date: Mon, 12 Mar 2018 16:57:51 +0100	[thread overview]
Message-ID: <20180312155753.9478-5-codekipper@gmail.com> (raw)
In-Reply-To: <20180312155753.9478-1-codekipper@gmail.com>

From: Marcus Cooper <codekipper@gmail.com>

The i2s block supports multi-lane i2s output however this functionality
is only possible in earlier SoCs where the pins are exposed and for
the i2s block used for HDMI audio on the later SoCs.

To enable this functionality, an optional property has been added to
the bindings.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 .../devicetree/bindings/sound/sun4i-i2s.txt        |  3 ++
 sound/soc/sunxi/sun4i-i2s.c                        | 48 +++++++++++++++++-----
 2 files changed, 41 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
index 48addef65b8f..3f966ac61b9e 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
@@ -33,6 +33,9 @@ Optional properties:
 				configured to extend the slot width to the
 				value specified. Min 8, Max 32.
 
+- allwinner,playback-channels:  if this property is present then the number
+				of available channels is extended and the
+				outputs enabled.
 Example:
 
 i2s0: i2s@1c22400 {
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 2bd0befa02a8..436480df1844 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -27,7 +27,7 @@
 
 #define SUN4I_I2S_CTRL_REG		0x00
 #define SUN4I_I2S_CTRL_SDO_EN_MASK		GENMASK(11, 8)
-#define SUN4I_I2S_CTRL_SDO_EN(sdo)			BIT(8 + (sdo))
+#define SUN4I_I2S_CTRL_SDO_EN(lines)		(((1 << lines) - 1) << 8)
 #define SUN4I_I2S_CTRL_MODE_MASK		BIT(5)
 #define SUN4I_I2S_CTRL_MODE_SLAVE			(1 << 5)
 #define SUN4I_I2S_CTRL_MODE_MASTER			(0 << 5)
@@ -394,14 +394,23 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 	struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
 	int sr, wss, channels;
 	u32 width;
+	int lines;
 
 	channels = params_channels(params);
-	if (channels != 2) {
+	if ((channels > dai->driver->playback.channels_max) ||
+		(channels < dai->driver->playback.channels_min)) {
 		dev_err(dai->dev, "Unsupported number of channels: %d\n",
 			channels);
 		return -EINVAL;
 	}
 
+	lines = (channels + 1) / 2;
+
+	/* Enable the required output lines */
+	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
+			   SUN4I_I2S_CTRL_SDO_EN_MASK,
+			   SUN4I_I2S_CTRL_SDO_EN(lines));
+
 	if (i2s->variant->has_chcfg) {
 		regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
 				   SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM_MASK,
@@ -412,8 +421,19 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	/* Map the channels for playback and capture */
-	regmap_field_write(i2s->field_txchanmap, 0x76543210);
 	regmap_field_write(i2s->field_rxchanmap, 0x00003210);
+	regmap_field_write(i2s->field_txchanmap, 0x10);
+	if (i2s->variant->has_chsel_tx_chen) {
+		if (channels > 2)
+			regmap_write(i2s->regmap,
+				     SUN8I_I2S_TX_CHAN_MAP_REG+4, 0x32);
+		if (channels > 4)
+			regmap_write(i2s->regmap,
+				     SUN8I_I2S_TX_CHAN_MAP_REG+8, 0x54);
+		if (channels > 6)
+			regmap_write(i2s->regmap,
+				     SUN8I_I2S_TX_CHAN_MAP_REG+12, 0x76);
+	}
 
 	/* Configure the channels */
 	regmap_field_write(i2s->field_txchansel,
@@ -692,12 +712,6 @@ static int sun4i_i2s_startup(struct snd_pcm_substream *substream,
 	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
 			   SUN4I_I2S_CTRL_GL_EN, SUN4I_I2S_CTRL_GL_EN);
 
-	/* Enable the first output line */
-	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
-			   SUN4I_I2S_CTRL_SDO_EN_MASK,
-			   SUN4I_I2S_CTRL_SDO_EN(0));
-
-
 	return clk_prepare_enable(i2s->mod_clk);
 }
 
@@ -1073,6 +1087,7 @@ static int sun4i_i2s_init_regmap_fields(struct device *dev,
 static int sun4i_i2s_probe(struct platform_device *pdev)
 {
 	struct sun4i_i2s *i2s;
+	struct snd_soc_dai_driver *soc_dai;
 	struct resource *res;
 	void __iomem *regs;
 	int irq, ret, val;
@@ -1148,6 +1163,19 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
 			i2s->slot_width = val;
 	}
 
+	soc_dai = devm_kmemdup(&pdev->dev, &sun4i_i2s_dai,
+			       sizeof(*soc_dai), GFP_KERNEL);
+	if (!soc_dai) {
+		ret = -ENOMEM;
+		goto err_pm_disable;
+	}
+
+	if (!of_property_read_u32(pdev->dev.of_node,
+				  "allwinner,playback-channels", &val)) {
+		if (val >= 2 && val <= 8)
+			soc_dai->playback.channels_max = val;
+	}
+
 	pm_runtime_enable(&pdev->dev);
 	if (!pm_runtime_enabled(&pdev->dev)) {
 		ret = sun4i_i2s_runtime_resume(&pdev->dev);
@@ -1157,7 +1185,7 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
 
 	ret = devm_snd_soc_register_component(&pdev->dev,
 					      &sun4i_i2s_component,
-					      &sun4i_i2s_dai, 1);
+					      soc_dai, 1);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not register DAI\n");
 		goto err_suspend;
-- 
2.16.2

  parent reply	other threads:[~2018-03-12 15:57 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-12 15:57 [PATCH v2 0/6] ASoC: sun4i-i2s: Updates to the driver codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-03-12 15:57 ` codekipper
2018-03-12 15:57 ` codekipper at gmail.com
     [not found] ` <20180312155753.9478-1-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-03-12 15:57   ` [PATCH v2 1/6] ASoC: sun4i-i2s: Add slot width override codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-03-12 15:57     ` codekipper
2018-03-12 15:57     ` codekipper at gmail.com
2018-03-12 18:20     ` Mark Brown
2018-03-12 18:20       ` Mark Brown
     [not found]     ` <20180312155753.9478-2-codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-03-13 11:59       ` Julian Calaby
2018-03-13 11:59         ` [linux-sunxi] " Julian Calaby
2018-03-13 11:59         ` Julian Calaby
2018-03-12 15:57   ` [PATCH v2 2/6] ASoC: sun4i-i2s: Add regmap field to sign extend sample codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-03-12 15:57     ` codekipper
2018-03-12 15:57     ` codekipper at gmail.com
2018-03-12 15:57   ` [PATCH v2 3/6] ASoC: sun4i-i2s: Correct divider calculations codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-03-12 15:57     ` codekipper
2018-03-12 15:57     ` codekipper at gmail.com
2018-03-13  8:20     ` Maxime Ripard
2018-03-13  8:20       ` Maxime Ripard
2018-03-12 15:57   ` codekipper-Re5JQEeQqe8AvxtiuMwx3w [this message]
2018-03-12 15:57     ` [PATCH v2 4/6] ASoC: sun4i-i2s: Add multi-lane functionality codekipper
2018-03-12 15:57     ` codekipper at gmail.com
2018-03-13  8:00     ` Maxime Ripard
2018-03-13  8:00       ` Maxime Ripard
2018-03-13  8:15       ` Code Kipper
2018-03-13  8:15         ` Code Kipper
2018-03-13  8:15         ` Code Kipper
2018-03-13  8:23         ` Maxime Ripard
2018-03-13  8:23           ` Maxime Ripard
2018-03-13  8:59           ` Code Kipper
2018-03-13  8:59             ` Code Kipper
2018-03-13  8:59             ` Code Kipper
2018-03-12 15:57   ` [PATCH v2 5/6] ASoc: sun4i-i2s: Add 20, 24 and 32 bit support codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-03-12 15:57     ` codekipper
2018-03-12 15:57     ` codekipper at gmail.com
2018-03-12 15:57   ` [PATCH v2 6/6] ASoC: sun4i-i2s: Add support for loopback codekipper-Re5JQEeQqe8AvxtiuMwx3w
2018-03-12 15:57     ` codekipper
2018-03-12 15:57     ` codekipper at gmail.com
2018-03-12 18:35     ` Mark Brown
2018-03-13 13:39       ` [linux-sunxi] " Chris Obbard
2018-03-13 13:39         ` Chris Obbard
2018-03-13 13:39         ` Chris Obbard
2018-03-13 14:03         ` Maxime Ripard
2018-03-13 14:03           ` Maxime Ripard
2018-03-13 16:26         ` Mark Brown
2018-03-13 16:26           ` [alsa-devel] " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180312155753.9478-5-codekipper@gmail.com \
    --to=codekipper-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
    --cc=be17068-p0aYb1w59bq9tCD/VL7h6Q@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=wens-jdAy2FN1RRM@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.